diff options
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 3 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-hub.c | 14 | ||||
| -rw-r--r-- | drivers/usb/host/ehci.h | 8 | ||||
| -rw-r--r-- | drivers/usb/host/fsl-mph-dr-of.c | 2 | ||||
| -rw-r--r-- | include/linux/fsl_devices.h | 1 |
5 files changed, 28 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 9f5ffb629973..91701cc68082 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -286,6 +286,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) if (pdata->has_fsl_erratum_a005275 == 1) ehci->has_fsl_hs_errata = 1; + if (pdata->has_fsl_erratum_a005697 == 1) + ehci->has_fsl_susp_errata = 1; + if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 74f62d68f013..df169c8e7225 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -310,6 +310,14 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } spin_unlock_irq(&ehci->lock); + if (changed && ehci_has_fsl_susp_errata(ehci)) + /* + * Wait for at least 10 millisecondes to ensure the controller + * enter the suspend status before initiating a port resume + * using the Force Port Resume bit (Not-EHCI compatible). + */ + usleep_range(10000, 20000); + if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) { /* * Wait for HCD to enter low-power mode or for the bus @@ -1200,6 +1208,12 @@ int ehci_hub_control( wIndex, (temp1 & HOSTPC_PHCD) ? "succeeded" : "failed"); } + if (ehci_has_fsl_susp_errata(ehci)) { + /* 10ms for HCD enter suspend */ + spin_unlock_irqrestore(&ehci->lock, flags); + usleep_range(10000, 20000); + spin_lock_irqsave(&ehci->lock, flags); + } set_bit(wIndex, &ehci->suspended_ports); break; case USB_PORT_FEAT_POWER: diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 3f3b74aeca97..a8e36170d8b8 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -219,6 +219,7 @@ struct ehci_hcd { /* one per controller */ unsigned no_selective_suspend:1; unsigned has_fsl_port_bug:1; /* FreeScale */ unsigned has_fsl_hs_errata:1; /* Freescale HS quirk */ + unsigned has_fsl_susp_errata:1; /* NXP SUSP quirk */ unsigned big_endian_mmio:1; unsigned big_endian_desc:1; unsigned big_endian_capbase:1; @@ -710,6 +711,13 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) #endif /* + * Some Freescale/NXP processors have an erratum (USB A-005697) + * in which we need to wait for 10ms for bus to enter suspend mode + * after setting SUSP bit. + */ +#define ehci_has_fsl_susp_errata(e) ((e)->has_fsl_susp_errata) + +/* * While most USB host controllers implement their registers in * little-endian format, a minority (celleb companion chip) implement * them in big endian format. diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index f07ccb25bc24..e90ddb530765 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -226,6 +226,8 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) of_property_read_bool(np, "fsl,usb-erratum-a007792"); pdata->has_fsl_erratum_a005275 = of_property_read_bool(np, "fsl,usb-erratum-a005275"); + pdata->has_fsl_erratum_a005697 = + of_property_read_bool(np, "fsl,usb_erratum-a005697"); /* * Determine whether phy_clk_valid needs to be checked diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2912914141a..60cef8227534 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -100,6 +100,7 @@ struct fsl_usb2_platform_data { unsigned already_suspended:1; unsigned has_fsl_erratum_a007792:1; unsigned has_fsl_erratum_a005275:1; + unsigned has_fsl_erratum_a005697:1; unsigned check_phy_clk_valid:1; /* register save area for suspend/resume */ |