summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts46
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts41
-rw-r--r--arch/arm/boot/dts/at91sam9x25ek.dts10
-rw-r--r--arch/arm/boot/dts/at91sam9x5ek.dtsi2
-rw-r--r--arch/arm/boot/dts/usb_a9g20_common.dtsi4
5 files changed, 66 insertions, 37 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index cfb1b6a23824..6d87b4eb6c41 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -53,6 +53,14 @@
model = "Atmel SAMA5D27 SOM1 EK";
compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+ aliases {
+ serial0 = &uart1; /* DBGU */
+ serial1 = &uart4; /* mikro BUS 1 */
+ serial2 = &uart2; /* mikro BUS 2 */
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -128,12 +136,14 @@
};
pwm0: pwm@f802c000 {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+ status = "disabled"; /* Conflict with leds. */
};
flx1: flexcom@f8038000 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
- status = "disabled";
+ status = "okay";
i2c2: i2c@600 {
compatible = "atmel,sama5d2-i2c";
@@ -147,7 +157,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
- status = "disabled";
+ status = "okay";
};
};
@@ -165,17 +175,12 @@
status = "okay";
};
- can0: can@f8054000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can0_default>;
- };
-
uart3: serial@fc008000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
- status = "disabled";
+ status = "disabled"; /* Conflict with isc. */
};
uart4: serial@fc00c000 {
@@ -199,7 +204,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <32>;
- status = "disabled";
+ status = "disabled"; /* Conflict with isc. */
};
spi2: spi@400 {
@@ -211,7 +216,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
atmel,fifo-size = <16>;
- status = "disabled";
+ status = "disabled"; /* Conflict with isc. */
};
};
@@ -228,7 +233,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <32>;
- status = "disabled";
+ status = "disabled"; /* Conflict with spi3 and i2c3. */
};
spi3: spi@400 {
@@ -240,7 +245,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
atmel,fifo-size = <16>;
- status = "okay";
+ status = "okay"; /* Conflict with uart6 and i2c3. */
};
i2c3: i2c@600 {
@@ -255,7 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
- status = "disabled";
+ status = "disabled"; /* Conflict with uart6 and spi3. */
};
};
@@ -268,12 +273,6 @@
pinctrl@fc038000 {
- pinctrl_can0_default: can0_default {
- pinmux = <PIN_PC10__CANTX0>,
- <PIN_PC11__CANRX0>;
- bias-disable;
- };
-
pinctrl_can1_default: can1_default {
pinmux = <PIN_PC26__CANTX1>,
<PIN_PC27__CANRX1>;
@@ -350,7 +349,7 @@
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
- bias-pull-up;
+ bias-disable;
};
ck_cd_vddsel {
@@ -368,7 +367,7 @@
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
- bias-pull-up;
+ bias-disable;
};
conf-ck_cd {
@@ -512,6 +511,7 @@
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
+ wakeup-source;
};
};
@@ -519,7 +519,7 @@
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
- status = "okay";
+ status = "okay"; /* Conflict with pwm0. */
red {
label = "red";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index b2b5a8534134..bb3fff4dbd24 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -103,6 +103,8 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay"; /* conflict with qspi0 */
+ vqmmc-supply = <&vdd_3v3_reg>;
+ vmmc-supply = <&vdd_3v3_reg>;
};
apb {
@@ -160,14 +162,6 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
- active-semi,input-voltage-threshold-microvolt = <6600>;
- active-semi,precondition-timeout = <40>;
- active-semi,total-timeout = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
status = "okay";
regulators {
@@ -220,11 +214,28 @@
regulator-always-on;
};
};
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
+
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ status = "okay";
+ };
};
};
pwm0: pwm@f802c000 {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+ status = "disabled"; /* conflict with leds */
};
flx0: flexcom@f8034000 {
@@ -435,7 +446,7 @@
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
- bias-pull-up;
+ bias-disable;
};
ck_cd_rstn_vddsel {
@@ -454,7 +465,7 @@
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
- bias-pull-up;
+ bias-disable;
};
conf-ck_cd {
@@ -494,6 +505,11 @@
bias-disable;
};
+ pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+ pinmux = <PIN_PB5__PWMH2>,
+ <PIN_PB6__PWML2>;
+ bias-pull-up;
+ };
};
classd: classd@fc048000 {
@@ -522,6 +538,7 @@
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
+ wakeup-source;
};
};
@@ -529,7 +546,7 @@
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
- status = "okay";
+ status = "okay"; /* conflict with pwm0 */
red {
label = "red";
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 494864836e83..f705a3165656 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -16,6 +16,10 @@
ahb {
apb {
+ can1: can@f8004000 {
+ status = "okay";
+ };
+
macb0: ethernet@f802c000 {
phy-mode = "rmii";
status = "okay";
@@ -25,6 +29,12 @@
phy-mode = "rmii";
status = "okay";
};
+
+ pwm0: pwm@f8034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+ status = "okay";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index eb6dcc4c2bc3..4a2e13c8bf00 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -50,6 +50,8 @@
};
usart0: serial@f801c000 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
status = "okay";
};
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
index 088c2c3685ab..81c3fe0465d9 100644
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -20,8 +20,8 @@
};
i2c-gpio-0 {
- rv3029c2@56 {
- compatible = "rv3029c2";
+ rtc@56 {
+ compatible = "microcrystal,rv3029";
reg = <0x56>;
};
};