summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mips/ingenic/devices.yaml35
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml4
-rw-r--r--MAINTAINERS1
-rw-r--r--arch/mips/Kconfig84
-rw-r--r--arch/mips/Makefile.postlink2
-rw-r--r--arch/mips/boot/Makefile2
-rw-r--r--arch/mips/boot/dts/ingenic/Makefile1
-rw-r--r--arch/mips/boot/dts/ingenic/cu1000-neo.dts170
-rw-r--r--arch/mips/boot/dts/ingenic/x1000.dtsi317
-rw-r--r--arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts8
-rw-r--r--arch/mips/boot/dts/ralink/mt7628a.dtsi10
-rw-r--r--arch/mips/cavium-octeon/octeon-irq.c2
-rw-r--r--arch/mips/configs/cu1000-neo_defconfig117
-rw-r--r--arch/mips/configs/generic/board-ocelot.config1
-rw-r--r--arch/mips/include/asm/Kbuild1
-rw-r--r--arch/mips/include/asm/bootinfo.h1
-rw-r--r--arch/mips/include/asm/cpu-features.h4
-rw-r--r--arch/mips/include/asm/cpu.h6
-rw-r--r--arch/mips/include/asm/gio_device.h2
-rw-r--r--arch/mips/include/asm/hazards.h4
-rw-r--r--arch/mips/include/asm/irqflags.h6
-rw-r--r--arch/mips/include/asm/local.h4
-rw-r--r--arch/mips/include/asm/mach-ip27/kernel-entry-init.h12
-rw-r--r--arch/mips/include/asm/mach-ip27/mangle-port.h4
-rw-r--r--arch/mips/include/asm/mach-ip27/mmzone.h4
-rw-r--r--arch/mips/include/asm/mach-ip27/topology.h2
-rw-r--r--arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h2
-rw-r--r--arch/mips/include/asm/mipsregs.h3
-rw-r--r--arch/mips/include/asm/pci/bridge.h3
-rw-r--r--arch/mips/include/asm/serial.h18
-rw-r--r--arch/mips/include/asm/sn/arch.h3
-rw-r--r--arch/mips/include/asm/sn/hub.h17
-rw-r--r--arch/mips/include/asm/sn/intr.h17
-rw-r--r--arch/mips/include/asm/sn/ioc3.h42
-rw-r--r--arch/mips/include/asm/sn/klconfig.h4
-rw-r--r--arch/mips/include/asm/sn/kldir.h193
-rw-r--r--arch/mips/include/asm/sn/sn0/hub.h22
-rw-r--r--arch/mips/include/asm/sn/sn0/hubni.h8
-rw-r--r--arch/mips/include/asm/sn/sn0/ip27.h85
-rw-r--r--arch/mips/include/asm/sn/sn0/kldir.h186
-rw-r--r--arch/mips/include/asm/sn/sn_private.h19
-rw-r--r--arch/mips/include/asm/sn/types.h4
-rw-r--r--arch/mips/jz4740/Kconfig10
-rw-r--r--arch/mips/jz4740/setup.c4
-rw-r--r--arch/mips/kernel/cpu-probe.c81
-rw-r--r--arch/mips/kernel/setup.c6
-rw-r--r--arch/mips/kernel/sync-r4k.c5
-rw-r--r--arch/mips/kernel/syscalls/Makefile2
-rw-r--r--arch/mips/kernel/unaligned.c36
-rw-r--r--arch/mips/lib/memcpy.S14
-rw-r--r--arch/mips/lib/memset.S16
-rw-r--r--arch/mips/lib/mips-atomic.c4
-rw-r--r--arch/mips/loongson2ef/common/pm.c2
-rw-r--r--arch/mips/loongson64/numa.c2
-rw-r--r--arch/mips/loongson64/platform.c3
-rw-r--r--arch/mips/math-emu/cp1emu.c38
-rw-r--r--arch/mips/math-emu/dp_maddf.c53
-rw-r--r--arch/mips/math-emu/ieee754.h16
-rw-r--r--arch/mips/math-emu/ieee754int.h1
-rw-r--r--arch/mips/math-emu/sp_maddf.c53
-rw-r--r--arch/mips/mm/init.c45
-rw-r--r--arch/mips/net/Makefile1
-rw-r--r--arch/mips/net/bpf_jit.c1270
-rw-r--r--arch/mips/net/bpf_jit_asm.S285
-rw-r--r--arch/mips/pci/pci-ip27.c2
-rw-r--r--arch/mips/pci/pci-xtalk-bridge.c52
-rw-r--r--arch/mips/ralink/ill_acc.c2
-rw-r--r--arch/mips/sgi-ip22/ip22-gio.c6
-rw-r--r--arch/mips/sgi-ip27/ip27-berr.c40
-rw-r--r--arch/mips/sgi-ip27/ip27-common.h12
-rw-r--r--arch/mips/sgi-ip27/ip27-console.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-hubio.c8
-rw-r--r--arch/mips/sgi-ip27/ip27-init.c25
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-klconfig.c51
-rw-r--r--arch/mips/sgi-ip27/ip27-klnuma.c16
-rw-r--r--arch/mips/sgi-ip27/ip27-memory.c57
-rw-r--r--arch/mips/sgi-ip27/ip27-nmi.c5
-rw-r--r--arch/mips/sgi-ip27/ip27-reset.c2
-rw-r--r--arch/mips/sgi-ip27/ip27-smp.c33
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c48
-rw-r--r--arch/mips/sgi-ip27/ip27-xtalk.c1
-rw-r--r--arch/mips/sgi-ip30/ip30-irq.c5
-rw-r--r--arch/mips/vdso/genvdso.c13
-rw-r--r--drivers/mfd/Kconfig13
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/ioc3.c669
-rw-r--r--drivers/net/ethernet/sgi/Kconfig5
-rw-r--r--drivers/net/ethernet/sgi/ioc3-eth.c544
-rw-r--r--drivers/rtc/rtc-m48t35.c11
-rw-r--r--drivers/soc/lantiq/fpi-bus.c4
-rw-r--r--drivers/tc/tc-driver.c5
-rw-r--r--drivers/tty/serial/8250/8250_ioc3.c98
-rw-r--r--drivers/tty/serial/8250/Kconfig11
-rw-r--r--drivers/tty/serial/8250/Makefile1
95 files changed, 3888 insertions, 1239 deletions
diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
new file mode 100644
index 000000000000..78dcf6ef3883
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ingenic/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic XBurst based Platforms Device Tree Bindings
+
+maintainers:
+ - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+description: |
+ Devices with a Ingenic XBurst CPU shall have the following properties.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+
+ - description: Qi Hardware Ben NanoNote
+ items:
+ - const: qi,lb60
+
+ - description: Game Consoles Worldwide GCW Zero
+ items:
+ - const: gcw,zero
+
+ - description: MIPS Creator CI20
+ items:
+ - const: img,ci20
+
+ - description: YSH & ATIL General Board CU Neo
+ items:
+ - const: yna,cu1000-neo
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1bc7b3c4b591..7fcd48adc276 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -555,6 +555,8 @@ patternProperties:
description: Logic PD, Inc.
"^longcheer,.*":
description: Longcheer Technology (Shanghai) Co., Ltd.
+ "^loongson,.*":
+ description: Loongson Technology Corporation Limited
"^lsi,.*":
description: LSI Corp. (LSI Logic)
"^lwn,.*":
@@ -1084,6 +1086,8 @@ patternProperties:
description: Shenzhen Xunlong Software CO.,Limited
"^xylon,.*":
description: Xylon
+ "^yna,.*":
+ description: YSH & ATIL
"^yones-toptech,.*":
description: Yones Toptech Co., Ltd.
"^ysoft,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index dc833b88c8bc..19da622dd0b1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11116,7 +11116,6 @@ F: drivers/usb/image/microtek.*
MIPS
M: Ralf Baechle <ralf@linux-mips.org>
M: Paul Burton <paulburton@kernel.org>
-M: James Hogan <jhogan@kernel.org>
L: linux-mips@vger.kernel.org
W: http://www.linux-mips.org/
T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a2739a34bb12..797d7f1ad5fe 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,9 +5,11 @@ config MIPS
select ARCH_32BIT_OFF_T if !64BIT
select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
select ARCH_CLOCKSOURCE_DATA
+ select ARCH_HAS_FORTIFY_SOURCE
+ select ARCH_HAS_KCOV
+ select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UBSAN_SANITIZE_ALL
- select ARCH_HAS_FORTIFY_SOURCE
select ARCH_SUPPORTS_UPROBES
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
@@ -47,7 +49,7 @@ config MIPS
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
select HAVE_ASM_MODVERSIONS
- select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
+ select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS
select HAVE_CONTEXT_TRACKING
select HAVE_COPY_THREAD_TLS
select HAVE_C_RECORDMCOUNT
@@ -55,11 +57,14 @@ config MIPS
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
+ select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
select HAVE_EXIT_THREAD
select HAVE_FAST_GUP
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
+ select HAVE_GCC_PLUGINS
+ select HAVE_GENERIC_VDSO
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
@@ -78,18 +83,14 @@ config MIPS
select HAVE_STACKPROTECTOR
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
- select HAVE_GENERIC_VDSO
select IRQ_FORCED_THREADING
select ISA if EISA
- select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
+ select MODULES_USE_ELF_RELA if MODULES && 64BIT
select PERF_USE_VMALLOC
select RTC_LIB
select SYSCTL_EXCEPTION_TRACE
select VIRT_TO_BUS
- select ARCH_HAS_PTE_SPECIAL if !(32BIT && CPU_HAS_RIXI)
- select ARCH_HAS_KCOV
- select HAVE_GCC_PLUGINS
menu "Machine selection"
@@ -104,20 +105,18 @@ config MIPS_GENERIC
select CEVT_R4K
select CLKSRC_MIPS_GIC
select COMMON_CLK
- select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
+ select CPU_MIPSR2_IRQ_VI
select CSRC_R4K
select DMA_PERDEV_COHERENT
select HAVE_PCI
select IRQ_MIPS_CPU
- select LIBFDT
select MIPS_AUTO_PFN_OFFSET
select MIPS_CPU_SCACHE
select MIPS_GIC
select MIPS_L1_CACHE_SHIFT_7
select NO_EXCEPT_FILL
select PCI_DRIVERS_GENERIC
- select PINCTRL
select SMP_UP if SMP
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
@@ -132,11 +131,12 @@ config MIPS_GENERIC
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_MICROMIPS
- select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MIPS16
+ select SYS_SUPPORTS_MIPS_CPS
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_RELOCATABLE
select SYS_SUPPORTS_SMARTMIPS
+ select UHI_BOOT
select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
@@ -144,7 +144,6 @@ config MIPS_GENERIC
select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USE_OF
- select UHI_BOOT
help
Select this to build a kernel which aims to support multiple boards,
generally using a flattened device tree passed from the bootloader
@@ -403,7 +402,6 @@ config MACH_INGENIC
select GENERIC_IRQ_CHIP
select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
select USE_OF
- select LIBFDT
config LANTIQ
bool "Lantiq based platforms"
@@ -510,7 +508,6 @@ config MACH_PISTACHIO
select DMA_NONCOHERENT
select GPIOLIB
select IRQ_MIPS_CPU
- select LIBFDT
select MFD_SYSCON
select MIPS_CPU_SCACHE
select MIPS_GIC
@@ -548,7 +545,6 @@ config MIPS_MALTA
select I8253
select I8259
select IRQ_MIPS_CPU
- select LIBFDT
select MIPS_BONITO64
select MIPS_CPU_SCACHE
select MIPS_GIC
@@ -980,7 +976,6 @@ config CAVIUM_OCTEON_SOC
select ZONE_DMA32
select HOLES_IN_ZONE
select GPIOLIB
- select LIBFDT
select USE_OF
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_SMP
@@ -1223,8 +1218,7 @@ config NO_IOPORT_MAP
def_bool n
config GENERIC_CSUM
- bool
- default y if !CPU_HAS_LOAD_STORE_LR
+ def_bool CPU_NO_LOAD_STORE_LR
config GENERIC_ISA_DMA
bool
@@ -1442,11 +1436,14 @@ config CPU_LOONGSON64
bool "Loongson 64-bit CPU"
depends on SYS_HAS_CPU_LOONGSON64
select ARCH_HAS_PHYS_TO_DMA
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select CPU_SUPPORTS_MSA
- select CPU_HAS_LOAD_STORE_LR
+ select CPU_DIEI_BROKEN if !LOONGSON3_ENHANCEMENT
+ select CPU_MIPSR2_IRQ_VI
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select MIPS_ASID_BITS_VARIABLE
@@ -1464,8 +1461,6 @@ config CPU_LOONGSON64
config LOONGSON3_ENHANCEMENT
bool "New Loongson-3 CPU Enhancements"
default n
- select CPU_MIPSR2
- select CPU_HAS_PREFETCH
depends on CPU_LOONGSON64
help
New Loongson-3 cores (since Loongson-3A R2, as opposed to Loongson-3A
@@ -1542,7 +1537,6 @@ config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
help
@@ -1560,7 +1554,6 @@ config CPU_MIPS32_R2
bool "MIPS32 Release 2"
depends on SYS_HAS_CPU_MIPS32_R2
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
@@ -1576,6 +1569,7 @@ config CPU_MIPS32_R6
bool "MIPS32 Release 6"
depends on SYS_HAS_CPU_MIPS32_R6
select CPU_HAS_PREFETCH
+ select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
@@ -1591,7 +1585,6 @@ config CPU_MIPS64_R1
bool "MIPS64 Release 1"
depends on SYS_HAS_CPU_MIPS64_R1
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1611,7 +1604,6 @@ config CPU_MIPS64_R2
bool "MIPS64 Release 2"
depends on SYS_HAS_CPU_MIPS64_R2
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1629,6 +1621,7 @@ config CPU_MIPS64_R6
bool "MIPS64 Release 6"
depends on SYS_HAS_CPU_MIPS64_R6
select CPU_HAS_PREFETCH
+ select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1646,7 +1639,6 @@ config CPU_R3000
bool "R3000"
depends on SYS_HAS_CPU_R3000
select CPU_HAS_WB
- select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1662,7 +1654,6 @@ config CPU_TX39XX
bool "R39XX"
depends on SYS_HAS_CPU_TX39XX
select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB
config CPU_VR41XX
@@ -1670,7 +1661,6 @@ config CPU_VR41XX
depends on SYS_HAS_CPU_VR41XX
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
- select CPU_HAS_LOAD_STORE_LR
help
The options selects support for the NEC VR4100 series of processors.
Only choose this option if you have one of these processors as a
@@ -1683,7 +1673,6 @@ config CPU_R4X00
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
MIPS Technologies R4000-series processors other than 4300, including
the R4000, R4400, R4600, and 4700.
@@ -1692,7 +1681,6 @@ config CPU_TX49XX
bool "R49XX"
depends on SYS_HAS_CPU_TX49XX
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
@@ -1703,7 +1691,6 @@ config CPU_R5000
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
MIPS Technologies R5000-series processors other than the Nevada.
@@ -1713,7 +1700,6 @@ config CPU_R5500
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set.
@@ -1724,7 +1710,6 @@ config CPU_NEVADA
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
QED / PMC-Sierra RM52xx-series ("Nevada") processors.
@@ -1732,7 +1717,6 @@ config CPU_R10000
bool "R10000"
depends on SYS_HAS_CPU_R10000
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1744,7 +1728,6 @@ config CPU_RM7000
bool "RM7000"
depends on SYS_HAS_CPU_RM7000
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1753,7 +1736,6 @@ config CPU_RM7000
config CPU_SB1
bool "SB1"
depends on SYS_HAS_CPU_SB1
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1764,7 +1746,6 @@ config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_64BIT_KERNEL
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
@@ -1794,7 +1775,6 @@ config CPU_BMIPS
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_CPUFREQ
select MIPS_EXTERNAL_TIMER
help
@@ -1803,7 +1783,6 @@ config CPU_BMIPS
config CPU_XLR
bool "Netlogic XLR SoC"
depends on SYS_HAS_CPU_XLR
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1822,7 +1801,6 @@ config CPU_XLP
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_MIPSR2
select CPU_SUPPORTS_HUGEPAGES
select MIPS_ASID_BITS_VARIABLE
@@ -1928,14 +1906,12 @@ config CPU_LOONGSON2EF
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select ARCH_HAS_PHYS_TO_DMA
- select CPU_HAS_LOAD_STORE_LR
config CPU_LOONGSON32
bool
select CPU_MIPS32
select CPU_MIPSR2
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_CPUFREQ
@@ -2110,12 +2086,14 @@ config CPU_MIPSR2
bool
default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
select CPU_HAS_RIXI
+ select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
select MIPS_SPRAM
config CPU_MIPSR6
bool
default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
select CPU_HAS_RIXI
+ select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
select HAVE_ARCH_BITREVERSE
select MIPS_ASID_BITS_VARIABLE
select MIPS_CRC_SUPPORT
@@ -2575,15 +2553,23 @@ config CPU_HAS_WB
config XKS01
bool
+config CPU_HAS_DIEI
+ depends on !CPU_DIEI_BROKEN
+ bool
+
+config CPU_DIEI_BROKEN
+ bool
+
config CPU_HAS_RIXI
bool
-config CPU_HAS_LOAD_STORE_LR
+config CPU_NO_LOAD_STORE_LR
bool
help
- CPU has support for unaligned load and store instructions:
+ CPU lacks support for unaligned load and store instructions:
LWL, LWR, SWL, SWR (Load/store word left/right).
- LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit systems).
+ LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit
+ systems).
#
# Vectored interrupt mode is an R2 feature
@@ -2696,6 +2682,14 @@ config NUMA
config SYS_SUPPORTS_NUMA
bool
+config HAVE_SETUP_PER_CPU_AREA
+ def_bool y
+ depends on NUMA
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+ def_bool y
+ depends on NUMA
+
config RELOCATABLE
bool "Relocatable kernel"
depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
diff --git a/arch/mips/Makefile.postlink b/arch/mips/Makefile.postlink
index f03fdc95143e..4b1d3ba3a8a2 100644
--- a/arch/mips/Makefile.postlink
+++ b/arch/mips/Makefile.postlink
@@ -17,7 +17,7 @@ quiet_cmd_ls3_llsc = LLSCCHK $@
cmd_ls3_llsc = $(CMD_LS3_LLSC) $@
CMD_RELOCS = arch/mips/boot/tools/relocs
-quiet_cmd_relocs = RELOCS $@
+quiet_cmd_relocs = RELOCS $@
cmd_relocs = $(CMD_RELOCS) $@
# `@true` prevents complaint when there is nothing to be done
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index 528bd73d530a..4ed45ade32a1 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -123,7 +123,7 @@ $(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS
targets += vmlinux.its
targets += vmlinux.gz.its
targets += vmlinux.bz2.its
-targets += vmlinux.lzmo.its
+targets += vmlinux.lzma.its
targets += vmlinux.lzo.its
quiet_cmd_cpp_its_S = ITS $@
diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 9cc48441eb71..e1654291a7b0 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -2,5 +2,6 @@
dtb-$(CONFIG_JZ4740_QI_LB60) += qi_lb60.dtb
dtb-$(CONFIG_JZ4770_GCW0) += gcw0.dtb
dtb-$(CONFIG_JZ4780_CI20) += ci20.dtb
+dtb-$(CONFIG_X1000_CU1000_NEO) += cu1000-neo.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
new file mode 100644
index 000000000000..03abd94acd84
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "yna,cu1000-neo", "ingenic,x1000";
+ model = "YSH & ATIL General Board CU Neo";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x04000000>;
+ };
+
+ wlan_pwrseq: msc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ clocks = <&lpoclk>;
+ clock-names = "ext_clock";
+
+ reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+
+ lpoclk: ap6212a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+&exclk {
+ clock-frequency = <24000000>;
+};
+
+&tcu {
+ /* 1500 kHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+ assigned-clock-rates = <1500000>, <1500000>;
+
+ /* Use channel #0 for the system timer channel #2 for the clocksource */
+ ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ ads7830@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+
+ status = "okay";
+};
+
+&mac {
+ phy-mode = "rmii";
+ phy-handle = <&lan8720a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ lan8720a: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&msc0 {
+ bus-width = <8>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc0>;
+
+ non-removable;
+
+ status = "okay";
+};
+
+&msc1 {
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ non-removable;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ status = "okay";
+
+ ap6212a: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ brcm,drive-strength = <10>;
+ };
+};
+
+&pinctrl {
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-disable;
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data-d";
+ bias-disable;
+ };
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
+
+ pins_msc0: msc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
+ bias-disable;
+ };
+
+ pins_msc1: msc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit", "mmc1-4bit";
+ bias-disable;
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
new file mode 100644
index 000000000000..4994c695a1a7
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,x1000", "ingenic,x1000e";
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ exclk: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtclk: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: x1000-cgu@10000000 {
+ compatible = "ingenic,x1000-cgu";
+ reg = <0x10000000 0x100>;
+
+ #clock-cells = <1>;
+
+ clocks = <&exclk>, <&rtclk>;
+ clock-names = "ext", "rtc";
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,x1000-tcu",
+ "ingenic,jz4770-tcu",
+ "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1000_CLK_RTCLK
+ &cgu X1000_CLK_EXCLK
+ &cgu X1000_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ wdt: watchdog@0 {
+ compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x0 0x10>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "wdt";
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,x1000-pinctrl";
+ reg = <0x10010000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+ };
+
+ i2c0: i2c-controller@10050000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10050000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu X1000_CLK_I2C0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c-controller@10051000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10051000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu X1000_CLK_I2C1>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c-controller@10052000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10052000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu X1000_CLK_I2C2>;
+
+ status = "disabled";
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1000-dma";
+ reg = <0x13420000 0x400
+ 0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1000_CLK_PDMA>;
+ };
+
+ mac: ethernet@134b0000 {
+ compatible = "ingenic,x1000-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1000_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ msc0: mmc@13450000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1000_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: mmc@13460000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1000_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index aa5caaa31104..6069b33cf09f 100644
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -177,6 +177,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */
+ fifo-size = <8>;
+ tx-threshold = <8>;
+
rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
@@ -195,3 +198,8 @@
&watchdog {
status = "okay";
};
+
+&wmac {
+ status = "okay";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+};
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
index 742bcc1dc2e0..892e8ab863c5 100644
--- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -285,4 +285,14 @@
interrupt-parent = <&intc>;
interrupts = <18>;
};
+
+ wmac: wmac@10300000 {
+ compatible = "mediatek,mt7628-wmac";
+ reg = <0x10300000 0x100000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ status = "disabled";
+ };
};
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index f97be32bf699..6bd1e97effdf 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -2193,7 +2193,7 @@ static int octeon_irq_cib_map(struct irq_domain *d,
struct octeon_irq_cib_chip_data *cd;
if (hw >= host_data->max_bits) {
- pr_err("ERROR: %s mapping %u is to big!\n",
+ pr_err("ERROR: %s mapping %u is too big!\n",
irq_domain_get_of_node(d)->name, (unsigned)hw);
return -EINVAL;
}
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
new file mode 100644
index 000000000000..9b05a8fdabe1
--- /dev/null
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -0,0 +1,117 @@
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MACH_INGENIC=y
+CONFIG_X1000_CU1000_NEO=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+# CONFIG_SECCOMP is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPACTION is not set
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CFG80211=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_SMSC_PHY=y
+CONFIG_BRCMFMAC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_JZ4780=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_SENSORS_ADS7828=y
+CONFIG_WATCHDOG=y
+CONFIG_JZ4740_WDT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_JZ4740=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4780=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CONSOLE_LOGLEVEL_QUIET=15
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_STACKTRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config
index 1134fbb99fc2..7626f2a75b03 100644
--- a/arch/mips/configs/generic/board-ocelot.config
+++ b/arch/mips/configs/generic/board-ocelot.config
@@ -41,6 +41,7 @@ CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_SPIDEV=y
+CONFIG_PINCTRL=y
CONFIG_PINCTRL_OCELOT=y
CONFIG_GPIO_SYSFS=y
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 61b0fc2026e6..16d1eb4c8fe6 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -19,6 +19,7 @@ generic-y += preempt.h
generic-y += qrwlock.h
generic-y += qspinlock.h
generic-y += sections.h
+generic-y += serial.h
generic-y += trace_clock.h
generic-y += unaligned.h
generic-y += user.h
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index d41a5057bc69..61727785a247 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -81,6 +81,7 @@ enum loongson2ef_machine_type {
#define MACH_INGENIC_JZ4770 2 /* JZ4770 SOC */
#define MACH_INGENIC_JZ4780 3 /* JZ4780 SOC */
#define MACH_INGENIC_X1000 4 /* X1000 SOC */
+#define MACH_INGENIC_X1830 5 /* X1830 SOC */
extern char *system_type;
const char *get_system_type(void);
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 983a6a7f43a1..de44c92b1c1f 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -555,6 +555,10 @@
# define cpu_has_perf __opt(MIPS_CPU_PERF)
#endif
+#ifndef cpu_has_mac2008_only
+# define cpu_has_mac2008_only __opt(MIPS_CPU_MAC_2008_ONLY)
+#endif
+
#ifdef CONFIG_SMP
/*
* Some systems share FTLB RAMs between threads within a core (siblings in
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index ea830783d663..216a22916740 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -46,7 +46,7 @@
#define PRID_COMP_NETLOGIC 0x0c0000
#define PRID_COMP_CAVIUM 0x0d0000
#define PRID_COMP_LOONGSON 0x140000
-#define PRID_COMP_INGENIC_D0 0xd00000 /* JZ4740, JZ4750 */
+#define PRID_COMP_INGENIC_D0 0xd00000 /* JZ4740, JZ4750, X1830 */
#define PRID_COMP_INGENIC_D1 0xd10000 /* JZ4770, JZ4775, X1000 */
#define PRID_COMP_INGENIC_E1 0xe10000 /* JZ4780 */
@@ -185,7 +185,8 @@
* These are the PRID's for when 23:16 == PRID_COMP_INGENIC_*
*/
-#define PRID_IMP_XBURST 0x0200
+#define PRID_IMP_XBURST_REV1 0x0200 /* XBurst with MXU SIMD ISA */
+#define PRID_IMP_XBURST_REV2 0x0100 /* XBurst with MXU2 SIMD ISA */
/*
* These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC
@@ -415,6 +416,7 @@ enum cpu_type_enum {
#define MIPS_CPU_MT_PER_TC_PERF_COUNTERS \
BIT_ULL(56) /* CPU has perf counters implemented per TC (MIPSMT ASE) */
#define MIPS_CPU_MMID BIT_ULL(57) /* CPU supports MemoryMapIDs */
+#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(58) /* CPU Only support MAC2008 Fused multiply-add instruction */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/gio_device.h b/arch/mips/include/asm/gio_device.h
index c52948f9ca95..159087f5386e 100644
--- a/arch/mips/include/asm/gio_device.h
+++ b/arch/mips/include/asm/gio_device.h
@@ -32,8 +32,6 @@ struct gio_driver {
};
#define to_gio_driver(drv) container_of(drv, struct gio_driver, driver)
-extern const struct gio_device_id *gio_match_device(const struct gio_device_id *,
- const struct gio_device *);
extern struct gio_device *gio_dev_get(struct gio_device *);
extern void gio_dev_put(struct gio_device *);
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a4f48b0f5541..a0b92205f933 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -23,7 +23,7 @@
* TLB hazards
*/
#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)) && \
- !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_LOONGSON3_ENHANCEMENT)
+ !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64)
/*
* MIPSR2 defines ehb for hazard avoidance
@@ -158,7 +158,7 @@ do { \
} while (0)
#elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
- defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_LOONGSON3_ENHANCEMENT) || \
+ defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_CPU_LOONGSON64) || \
defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR)
/*
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index c4728bbdf15b..47a8ffc0b413 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -18,7 +18,7 @@
#include <asm/compiler.h>
#include <asm/hazards.h>
-#if defined(CONFIG_CPU_MIPSR2) || defined (CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_HAS_DIEI)
static inline void arch_local_irq_disable(void)
{
@@ -94,7 +94,7 @@ static inline void arch_local_irq_restore(unsigned long flags)
void arch_local_irq_disable(void);
unsigned long arch_local_irq_save(void);
void arch_local_irq_restore(unsigned long flags);
-#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
+#endif /* CONFIG_CPU_HAS_DIEI */
static inline void arch_local_irq_enable(void)
{
@@ -102,7 +102,7 @@ static inline void arch_local_irq_enable(void)
" .set push \n"
" .set reorder \n"
" .set noat \n"
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_HAS_DIEI)
" ei \n"
#else
" mfc0 $1,$12 \n"
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
index 02783e141c32..fef0fda8f82f 100644
--- a/arch/mips/include/asm/local.h
+++ b/arch/mips/include/asm/local.h
@@ -37,6 +37,7 @@ static __inline__ long local_add_return(long i, local_t * l)
__asm__ __volatile__(
" .set push \n"
" .set arch=r4000 \n"
+ __SYNC(full, loongson3_war) " \n"
"1:" __LL "%1, %2 # local_add_return \n"
" addu %0, %1, %3 \n"
__SC "%0, %2 \n"
@@ -52,6 +53,7 @@ static __inline__ long local_add_return(long i, local_t * l)
__asm__ __volatile__(
" .set push \n"
" .set "MIPS_ISA_ARCH_LEVEL" \n"
+ __SYNC(full, loongson3_war) " \n"
"1:" __LL "%1, %2 # local_add_return \n"
" addu %0, %1, %3 \n"
__SC "%0, %2 \n"
@@ -84,6 +86,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
__asm__ __volatile__(
" .set push \n"
" .set arch=r4000 \n"
+ __SYNC(full, loongson3_war) " \n"
"1:" __LL "%1, %2 # local_sub_return \n"
" subu %0, %1, %3 \n"
__SC "%0, %2 \n"
@@ -99,6 +102,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
__asm__ __volatile__(
" .set push \n"
" .set "MIPS_ISA_ARCH_LEVEL" \n"
+ __SYNC(full, loongson3_war) " \n"
"1:" __LL "%1, %2 # local_sub_return \n"
" subu %0, %1, %3 \n"
__SC "%0, %2 \n"
diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
index f992c1db876b..3e54f605a70b 100644
--- a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
@@ -10,20 +10,10 @@
#define __ASM_MACH_IP27_KERNEL_ENTRY_H
#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hubni.h>
+#include <asm/sn/agent.h>
#include <asm/sn/klkernvars.h>
/*
- * Returns the local nasid into res.
- */
- .macro GET_NASID_ASM res
- dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
- ld \res, (\res)
- and \res, NSRI_NODEID_MASK
- dsrl \res, NSRI_NODEID_SHFT
- .endm
-
-/*
* TLB bits
*/
#define PAGE_GLOBAL (1 << 6)
diff --git a/arch/mips/include/asm/mach-ip27/mangle-port.h b/arch/mips/include/asm/mach-ip27/mangle-port.h
index f6e4912ea062..27c56efa519f 100644
--- a/arch/mips/include/asm/mach-ip27/mangle-port.h
+++ b/arch/mips/include/asm/mach-ip27/mangle-port.h
@@ -8,7 +8,7 @@
#ifndef __ASM_MACH_IP27_MANGLE_PORT_H
#define __ASM_MACH_IP27_MANGLE_PORT_H
-#define __swizzle_addr_b(port) (port)
+#define __swizzle_addr_b(port) ((port) ^ 3)
#define __swizzle_addr_w(port) ((port) ^ 2)
#define __swizzle_addr_l(port) (port)
#define __swizzle_addr_q(port) (port)
@@ -20,6 +20,6 @@
# define ioswabl(a, x) (x)
# define __mem_ioswabl(a, x) cpu_to_le32(x)
# define ioswabq(a, x) (x)
-# define __mem_ioswabq(a, x) cpu_to_le32(x)
+# define __mem_ioswabq(a, x) cpu_to_le64(x)
#endif /* __ASM_MACH_IP27_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h
index f463826515df..08c36e50a860 100644
--- a/arch/mips/include/asm/mach-ip27/mmzone.h
+++ b/arch/mips/include/asm/mach-ip27/mmzone.h
@@ -4,7 +4,8 @@
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/klkernvars.h>
#define pa_to_nid(addr) NASID_GET(addr)
@@ -12,7 +13,6 @@ struct hub_data {
kern_vars_t kern_vars;
DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW);
cpumask_t h_cpus;
- unsigned long slice_map;
};
struct node_data {
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index be61ddcdacab..d66cc53feab8 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -2,12 +2,12 @@
#ifndef _ASM_MACH_TOPOLOGY_H
#define _ASM_MACH_TOPOLOGY_H 1
-#include <asm/sn/hub.h>
#include <asm/sn/types.h>
#include <asm/mmzone.h>
struct cpuinfo_ip27 {
nasid_t p_nasid; /* my node ID in numa-as-id-space */
+ unsigned short p_speed; /* cpu speed in MHz */
unsigned char p_slice; /* Physical position on node board */
};
diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
index 7dc8d75445a9..4fab38c743dd 100644
--- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
@@ -46,5 +46,7 @@
#define cpu_has_wsbh 1
#define cpu_has_ic_fills_f_dc 1
#define cpu_hwrena_impl_bits 0xc0000000
+#define cpu_has_mac2008_only 1
+#define cpu_has_mips_r2_exec_hazard 0
#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 0d5a30988697..796fe47cfd17 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1101,9 +1101,12 @@
/*
* Bits 22:20 of the FPU Status Register will be read as 0,
* and should be written as zero.
+ * MAC2008 was removed in Release 5 so we still treat it as
+ * reserved.
*/
#define FPU_CSR_RSVD (_ULCAST_(7) << 20)
+#define FPU_CSR_MAC2008 (_ULCAST_(1) << 20)
#define FPU_CSR_ABS2008 (_ULCAST_(1) << 19)
#define FPU_CSR_NAN2008 (_ULCAST_(1) << 18)
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index 3bc630ff9ad4..9c476a0400e0 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -806,7 +806,8 @@ struct bridge_controller {
unsigned long baddr;
unsigned long intr_addr;
struct irq_domain *domain;
- unsigned int pci_int[8];
+ unsigned int pci_int[8][2];
+ unsigned int int_mapping[8][2];
u32 ioc3_sid[8];
nasid_t nasid;
};
diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
deleted file mode 100644
index 2777148dbfc5..000000000000
--- a/arch/mips/include/asm/serial.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2017 MIPS Tech, LLC
- */
-#ifndef __ASM__SERIAL_H
-#define __ASM__SERIAL_H
-
-#ifdef CONFIG_MIPS_GENERIC
-/*
- * Generic kernels cannot know a correct value for all platforms at
- * compile time. Set it to 0 to prevent 8250_early using it
- */
-#define BASE_BAUD 0
-#else
-#include <asm-generic/serial.h>
-#endif
-
-#endif /* __ASM__SERIAL_H */
diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h
index f7d3273d9599..9a9682543e89 100644
--- a/arch/mips/include/asm/sn/arch.h
+++ b/arch/mips/include/asm/sn/arch.h
@@ -25,7 +25,4 @@
#define INVALID_MODULE (moduleid_t)-1
#define INVALID_PARTID (partid_t)-1
-extern nasid_t get_nasid(void);
-extern int get_cpu_slice(cpuid_t);
-
#endif /* _ASM_SN_ARCH_H */
diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h
deleted file mode 100644
index 45878fbefbae..000000000000
--- a/arch/mips/include/asm/sn/hub.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SN_HUB_H
-#define __ASM_SN_HUB_H
-
-#include <linux/types.h>
-#include <linux/cpumask.h>
-#include <asm/sn/types.h>
-#include <asm/sn/io.h>
-#include <asm/sn/klkernvars.h>
-#include <asm/xtalk/xtalk.h>
-
-/* ip27-hubio.c */
-extern unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
- unsigned long xtalk_addr, size_t size);
-extern void hub_pio_init(nasid_t nasid);
-
-#endif /* __ASM_SN_HUB_H */
diff --git a/arch/mips/include/asm/sn/intr.h b/arch/mips/include/asm/sn/intr.h
index fc1348193957..3d6954d370dc 100644
--- a/arch/mips/include/asm/sn/intr.h
+++ b/arch/mips/include/asm/sn/intr.h
@@ -8,15 +8,6 @@
#ifndef __ASM_SN_INTR_H
#define __ASM_SN_INTR_H
-/* Number of interrupt levels associated with each interrupt register. */
-#define N_INTPEND_BITS 64
-
-#define INT_PEND0_BASELVL 0
-#define INT_PEND1_BASELVL 64
-
-#define N_INTPENDJUNK_BITS 8
-#define INTPENDJUNK_CLRBIT 0x80
-
/*
* Macros to manipulate the interrupt register on the calling hub chip.
*/
@@ -84,14 +75,6 @@ do { \
#define CPU_RESCHED_B_IRQ 8
#define CPU_CALL_A_IRQ 9
#define CPU_CALL_B_IRQ 10
-#define MSC_MESG_INTR 11
-#define BASE_PCI_IRQ 12
-
-/*
- * INT_PEND0 again, bits determined by hardware / hardcoded:
- */
-#define SDISK_INTR 63 /* SABLE name */
-#define IP_PEND0_6_63 63 /* What is this bit? */
/*
* INT_PEND1 hard-coded bits:
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
index 78ef760ddde4..2c09c17cadcd 100644
--- a/arch/mips/include/asm/sn/ioc3.h
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -21,50 +21,50 @@ struct ioc3_serialregs {
/* SUPERIO uart register map */
struct ioc3_uartregs {
+ u8 iu_lcr;
union {
- u8 iu_rbr; /* read only, DLAB == 0 */
- u8 iu_thr; /* write only, DLAB == 0 */
- u8 iu_dll; /* DLAB == 1 */
+ u8 iu_iir; /* read only */
+ u8 iu_fcr; /* write only */
};
union {
u8 iu_ier; /* DLAB == 0 */
u8 iu_dlm; /* DLAB == 1 */
};
union {
- u8 iu_iir; /* read only */
- u8 iu_fcr; /* write only */
+ u8 iu_rbr; /* read only, DLAB == 0 */
+ u8 iu_thr; /* write only, DLAB == 0 */
+ u8 iu_dll; /* DLAB == 1 */
};
- u8 iu_lcr;
- u8 iu_mcr;
- u8 iu_lsr;
- u8 iu_msr;
u8 iu_scr;
+ u8 iu_msr;
+ u8 iu_lsr;
+ u8 iu_mcr;
};
struct ioc3_sioregs {
u8 fill[0x141]; /* starts at 0x141 */
- u8 uartc;
u8 kbdcg;
+ u8 uartc;
- u8 fill0[0x150 - 0x142 - 1];
+ u8 fill0[0x151 - 0x142 - 1];
- u8 pp_data;
- u8 pp_dsr;
u8 pp_dcr;
+ u8 pp_dsr;
+ u8 pp_data;
- u8 fill1[0x158 - 0x152 - 1];
+ u8 fill1[0x159 - 0x153 - 1];
- u8 pp_fifa;
- u8 pp_cfgb;
u8 pp_ecr;
+ u8 pp_cfgb;
+ u8 pp_fifa;
- u8 fill2[0x168 - 0x15a - 1];
+ u8 fill2[0x16a - 0x15b - 1];
- u8 rtcad;
u8 rtcdat;
+ u8 rtcad;
- u8 fill3[0x170 - 0x169 - 1];
+ u8 fill3[0x170 - 0x16b - 1];
struct ioc3_uartregs uartb; /* 0x20170 */
struct ioc3_uartregs uarta; /* 0x20178 */
@@ -598,5 +598,9 @@ struct ioc3_etxd {
#define IOC3_SUBSYS_IP30_SYSBOARD 0xc304
#define IOC3_SUBSYS_MENET 0xc305
#define IOC3_SUBSYS_MENET4 0xc306
+#define IOC3_SUBSYS_IO7 0xc307
+#define IOC3_SUBSYS_IO8 0xc308
+#define IOC3_SUBSYS_IO9 0xc309
+#define IOC3_SUBSYS_IP34_SYSBOARD 0xc30A
#endif /* MIPS_SN_IOC3_H */
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h
index 467c313d5767..117f85e4bef5 100644
--- a/arch/mips/include/asm/sn/klconfig.h
+++ b/arch/mips/include/asm/sn/klconfig.h
@@ -889,10 +889,6 @@ typedef union {
extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
-extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
-
-extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
-
#endif /* _ASM_SN_KLCONFIG_H */
diff --git a/arch/mips/include/asm/sn/kldir.h b/arch/mips/include/asm/sn/kldir.h
index bfb3aec94539..245f59bf3845 100644
--- a/arch/mips/include/asm/sn/kldir.h
+++ b/arch/mips/include/asm/sn/kldir.h
@@ -1,201 +1,16 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
- *
- * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
- * Copyright (C) 1999, 2000 by Ralf Baechle
- */
+/* SPDX-License-Identifier: GPL-2.0 */
+
#ifndef _ASM_SN_KLDIR_H
#define _ASM_SN_KLDIR_H
-
-/*
- * The kldir memory area resides at a fixed place in each node's memory and
- * provides pointers to most other IP27 memory areas. This allows us to
- * resize and/or relocate memory areas at a later time without breaking all
- * firmware and kernels that use them. Indices in the array are
- * permanently dedicated to areas listed below. Some memory areas (marked
- * below) reside at a permanently fixed location, but are included in the
- * directory for completeness.
- */
-
#define KLDIR_MAGIC 0x434d5f53505f5357
-/*
- * The upper portion of the memory map applies during boot
- * only and is overwritten by IRIX/SYMMON.
- *
- * MEMORY MAP PER NODE
- *
- * 0x2000000 (32M) +-----------------------------------------+
- * | IO6 BUFFERS FOR FLASH ENET IOC3 |
- * 0x1F80000 (31.5M) +-----------------------------------------+
- * | IO6 TEXT/DATA/BSS/stack |
- * 0x1C00000 (30M) +-----------------------------------------+
- * | IO6 PROM DEBUG TEXT/DATA/BSS/stack |
- * 0x0800000 (28M) +-----------------------------------------+
- * | IP27 PROM TEXT/DATA/BSS/stack |
- * 0x1B00000 (27M) +-----------------------------------------+
- * | IP27 CFG |
- * 0x1A00000 (26M) +-----------------------------------------+
- * | Graphics PROM |
- * 0x1800000 (24M) +-----------------------------------------+
- * | 3rd Party PROM drivers |
- * 0x1600000 (22M) +-----------------------------------------+
- * | |
- * | Free |
- * | |
- * +-----------------------------------------+
- * | UNIX DEBUG Version |
- * 0x190000 (2M--) +-----------------------------------------+
- * | SYMMON |
- * | (For UNIX Debug only) |
- * 0x34000 (208K) +-----------------------------------------+
- * | SYMMON STACK [NUM_CPU_PER_NODE] |
- * | (For UNIX Debug only) |
- * 0x25000 (148K) +-----------------------------------------+
- * | KLCONFIG - II (temp) |
- * | |
- * | ---------------------------- |
- * | |
- * | UNIX NON-DEBUG Version |
- * 0x19000 (100K) +-----------------------------------------+
- *
- *
- * The lower portion of the memory map contains information that is
- * permanent and is used by the IP27PROM, IO6PROM and IRIX.
- *
- * 0x19000 (100K) +-----------------------------------------+
- * | |
- * | PI Error Spools (32K) |
- * | |
- * 0x12000 (72K) +-----------------------------------------+
- * | Unused |
- * 0x11c00 (71K) +-----------------------------------------+
- * | CPU 1 NMI Eframe area |
- * 0x11a00 (70.5K) +-----------------------------------------+
- * | CPU 0 NMI Eframe area |
- * 0x11800 (70K) +-----------------------------------------+
- * | CPU 1 NMI Register save area |
- * 0x11600 (69.5K) +-----------------------------------------+
- * | CPU 0 NMI Register save area |
- * 0x11400 (69K) +-----------------------------------------+
- * | GDA (1k) |
- * 0x11000 (68K) +-----------------------------------------+
- * | Early cache Exception stack |
- * | and/or |
- * | kernel/io6prom nmi registers |
- * 0x10800 (66k) +-----------------------------------------+
- * | cache error eframe |
- * 0x10400 (65K) +-----------------------------------------+
- * | Exception Handlers (UALIAS copy) |
- * 0x10000 (64K) +-----------------------------------------+
- * | |
- * | |
- * | KLCONFIG - I (permanent) (48K) |
- * | |
- * | |
- * | |
- * 0x4000 (16K) +-----------------------------------------+
- * | NMI Handler (Protected Page) |
- * 0x3000 (12K) +-----------------------------------------+
- * | ARCS PVECTORS (master node only) |
- * 0x2c00 (11K) +-----------------------------------------+
- * | ARCS TVECTORS (master node only) |
- * 0x2800 (10K) +-----------------------------------------+
- * | LAUNCH [NUM_CPU] |
- * 0x2400 (9K) +-----------------------------------------+
- * | Low memory directory (KLDIR) |
- * 0x2000 (8K) +-----------------------------------------+
- * | ARCS SPB (1K) |
- * 0x1000 (4K) +-----------------------------------------+
- * | Early cache Exception stack |
- * | and/or |
- * | kernel/io6prom nmi registers |
- * 0x800 (2k) +-----------------------------------------+
- * | cache error eframe |
- * 0x400 (1K) +-----------------------------------------+
- * | Exception Handlers |
- * 0x0 (0K) +-----------------------------------------+
- */
-
-#ifdef __ASSEMBLY__
#define KLDIR_OFF_MAGIC 0x00
#define KLDIR_OFF_OFFSET 0x08
#define KLDIR_OFF_POINTER 0x10
#define KLDIR_OFF_SIZE 0x18
#define KLDIR_OFF_COUNT 0x20
#define KLDIR_OFF_STRIDE 0x28
-#endif /* __ASSEMBLY__ */
-
-/*
- * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
- * we define here. Since it's set up in the prom. We can't redefine it later
- * and expect more space to be allocated. The way to find out the true size
- * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
- * for a particular node.
- */
-#define SYMMON_STACK_SIZE 0x8000
-
-#if defined(PROM)
-
-/*
- * These defines are prom version dependent. No code other than the IP27
- * prom should attempt to use these values.
- */
-#define IP27_LAUNCH_OFFSET 0x2400
-#define IP27_LAUNCH_SIZE 0x400
-#define IP27_LAUNCH_COUNT 2
-#define IP27_LAUNCH_STRIDE 0x200
-
-#define IP27_KLCONFIG_OFFSET 0x4000
-#define IP27_KLCONFIG_SIZE 0xc000
-#define IP27_KLCONFIG_COUNT 1
-#define IP27_KLCONFIG_STRIDE 0
-
-#define IP27_NMI_OFFSET 0x3000
-#define IP27_NMI_SIZE 0x40
-#define IP27_NMI_COUNT 2
-#define IP27_NMI_STRIDE 0x40
-
-#define IP27_PI_ERROR_OFFSET 0x12000
-#define IP27_PI_ERROR_SIZE 0x4000
-#define IP27_PI_ERROR_COUNT 1
-#define IP27_PI_ERROR_STRIDE 0
-
-#define IP27_SYMMON_STK_OFFSET 0x25000
-#define IP27_SYMMON_STK_SIZE 0xe000
-#define IP27_SYMMON_STK_COUNT 2
-/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
-#define IP27_SYMMON_STK_STRIDE 0x7000
-
-#define IP27_FREEMEM_OFFSET 0x19000
-#define IP27_FREEMEM_SIZE -1
-#define IP27_FREEMEM_COUNT 1
-#define IP27_FREEMEM_STRIDE 0
-
-#endif /* PROM */
-/*
- * There will be only one of these in a partition so the IO6 must set it up.
- */
-#define IO6_GDA_OFFSET 0x11000
-#define IO6_GDA_SIZE 0x400
-#define IO6_GDA_COUNT 1
-#define IO6_GDA_STRIDE 0
-
-/*
- * save area of kernel nmi regs in the prom format
- */
-#define IP27_NMI_KREGS_OFFSET 0x11400
-#define IP27_NMI_KREGS_CPU_SIZE 0x200
-/*
- * save area of kernel nmi regs in eframe format
- */
-#define IP27_NMI_EFRAME_OFFSET 0x11800
-#define IP27_NMI_EFRAME_SIZE 0x200
#define KLDIR_ENT_SIZE 0x40
#define KLDIR_MAX_ENTRIES (0x400 / 0x40)
@@ -214,4 +29,8 @@ typedef struct kldir_ent_s {
} kldir_ent_t;
#endif /* !__ASSEMBLY__ */
+#ifdef CONFIG_SGI_IP27
+#include <asm/sn/sn0/kldir.h>
+#endif
+
#endif /* _ASM_SN_KLDIR_H */
diff --git a/arch/mips/include/asm/sn/sn0/hub.h b/arch/mips/include/asm/sn/sn0/hub.h
index d78dd76d5dcf..c84adde36d41 100644
--- a/arch/mips/include/asm/sn/sn0/hub.h
+++ b/arch/mips/include/asm/sn/sn0/hub.h
@@ -37,4 +37,26 @@
#define UATTR_MSPEC 2
#define UATTR_UNCAC 3
+#ifdef __ASSEMBLY__
+/*
+ * Returns the local nasid into res.
+ */
+ .macro GET_NASID_ASM res
+ dli \res, LOCAL_HUB_ADDR(NI_STATUS_REV_ID)
+ ld \res, (\res)
+ and \res, NSRI_NODEID_MASK
+ dsrl \res, NSRI_NODEID_SHFT
+ .endm
+#else
+
+/*
+ * get_nasid() returns the physical node id number of the caller.
+ */
+static inline nasid_t get_nasid(void)
+{
+ return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK)
+ >> NSRI_NODEID_SHFT);
+}
+#endif
+
#endif /* _ASM_SN_SN0_HUB_H */
diff --git a/arch/mips/include/asm/sn/sn0/hubni.h b/arch/mips/include/asm/sn/sn0/hubni.h
index b73c4bee65f2..b8253142cb83 100644
--- a/arch/mips/include/asm/sn/sn0/hubni.h
+++ b/arch/mips/include/asm/sn/sn0/hubni.h
@@ -250,6 +250,14 @@ typedef union hubni_port_error_u {
#define NI_LLP_CB_MAX 0xff
#define NI_LLP_SN_MAX 0xff
+static inline int get_region_shift(void)
+{
+ if (LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK)
+ return NASID_TO_FINEREG_SHFT;
+
+ return NASID_TO_COARSEREG_SHFT;
+}
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_SGI_SN0_HUBNI_H */
diff --git a/arch/mips/include/asm/sn/sn0/ip27.h b/arch/mips/include/asm/sn/sn0/ip27.h
deleted file mode 100644
index 3b5efeefcc3f..000000000000
--- a/arch/mips/include/asm/sn/sn0/ip27.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Derived from IRIX <sys/SN/SN0/IP27.h>.
- *
- * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
- * Copyright (C) 1999, 2006 by Ralf Baechle
- */
-#ifndef _ASM_SN_SN0_IP27_H
-#define _ASM_SN_SN0_IP27_H
-
-#include <asm/mipsregs.h>
-
-/*
- * Simple definitions for the masks which remove SW bits from pte.
- */
-
-#define TLBLO_HWBITSHIFT 0 /* Shift value, for masking */
-
-#ifndef __ASSEMBLY__
-
-#define CAUSE_BERRINTR IE_IRQ5
-
-#define ECCF_CACHE_ERR 0
-#define ECCF_TAGLO 1
-#define ECCF_ECC 2
-#define ECCF_ERROREPC 3
-#define ECCF_PADDR 4
-#define ECCF_SIZE (5 * sizeof(long))
-
-#endif /* !__ASSEMBLY__ */
-
-#ifdef __ASSEMBLY__
-
-/*
- * KL_GET_CPUNUM (similar to EV_GET_SPNUM for EVEREST platform) reads
- * the processor number of the calling processor. The proc parameters
- * must be a register.
- */
-#define KL_GET_CPUNUM(proc) \
- dli proc, LOCAL_HUB(0); \
- ld proc, PI_CPU_NUM(proc)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * R10000 status register interrupt bit mask usage for IP27.
- */
-#define SRB_SWTIMO IE_SW0 /* 0x0100 */
-#define SRB_NET IE_SW1 /* 0x0200 */
-#define SRB_DEV0 IE_IRQ0 /* 0x0400 */
-#define SRB_DEV1 IE_IRQ1 /* 0x0800 */
-#define SRB_TIMOCLK IE_IRQ2 /* 0x1000 */
-#define SRB_PROFCLK IE_IRQ3 /* 0x2000 */
-#define SRB_ERR IE_IRQ4 /* 0x4000 */
-#define SRB_SCHEDCLK IE_IRQ5 /* 0x8000 */
-
-#define SR_IBIT_HI SRB_DEV0
-#define SR_IBIT_PROF SRB_PROFCLK
-
-#define SRB_SWTIMO_IDX 0
-#define SRB_NET_IDX 1
-#define SRB_DEV0_IDX 2
-#define SRB_DEV1_IDX 3
-#define SRB_TIMOCLK_IDX 4
-#define SRB_PROFCLK_IDX 5
-#define SRB_ERR_IDX 6
-#define SRB_SCHEDCLK_IDX 7
-
-#define NUM_CAUSE_INTRS 8
-
-#define SCACHE_LINESIZE 128
-#define SCACHE_LINEMASK (SCACHE_LINESIZE - 1)
-
-#include <asm/sn/addrs.h>
-
-#define LED_CYCLE_MASK 0x0f
-#define LED_CYCLE_SHFT 4
-
-#define SEND_NMI(_nasid, _slice) \
- REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
-
-#endif /* _ASM_SN_SN0_IP27_H */
diff --git a/arch/mips/include/asm/sn/sn0/kldir.h b/arch/mips/include/asm/sn/sn0/kldir.h
new file mode 100644
index 000000000000..1b10af6cbd5e
--- /dev/null
+++ b/arch/mips/include/asm/sn/sn0/kldir.h
@@ -0,0 +1,186 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Derived from IRIX <sys/SN/kldir.h>, revision 1.21.
+ *
+ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999, 2000 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_KLDIR_H
+#define _ASM_SN_SN0_KLDIR_H
+
+
+/*
+ * The kldir memory area resides at a fixed place in each node's memory and
+ * provides pointers to most other IP27 memory areas. This allows us to
+ * resize and/or relocate memory areas at a later time without breaking all
+ * firmware and kernels that use them. Indices in the array are
+ * permanently dedicated to areas listed below. Some memory areas (marked
+ * below) reside at a permanently fixed location, but are included in the
+ * directory for completeness.
+ */
+
+/*
+ * The upper portion of the memory map applies during boot
+ * only and is overwritten by IRIX/SYMMON.
+ *
+ * MEMORY MAP PER NODE
+ *
+ * 0x2000000 (32M) +-----------------------------------------+
+ * | IO6 BUFFERS FOR FLASH ENET IOC3 |
+ * 0x1F80000 (31.5M) +-----------------------------------------+
+ * | IO6 TEXT/DATA/BSS/stack |
+ * 0x1C00000 (30M) +-----------------------------------------+
+ * | IO6 PROM DEBUG TEXT/DATA/BSS/stack |
+ * 0x0800000 (28M) +-----------------------------------------+
+ * | IP27 PROM TEXT/DATA/BSS/stack |
+ * 0x1B00000 (27M) +-----------------------------------------+
+ * | IP27 CFG |
+ * 0x1A00000 (26M) +-----------------------------------------+
+ * | Graphics PROM |
+ * 0x1800000 (24M) +-----------------------------------------+
+ * | 3rd Party PROM drivers |
+ * 0x1600000 (22M) +-----------------------------------------+
+ * | |
+ * | Free |
+ * | |
+ * +-----------------------------------------+
+ * | UNIX DEBUG Version |
+ * 0x190000 (2M--) +-----------------------------------------+
+ * | SYMMON |
+ * | (For UNIX Debug only) |
+ * 0x34000 (208K) +-----------------------------------------+
+ * | SYMMON STACK [NUM_CPU_PER_NODE] |
+ * | (For UNIX Debug only) |
+ * 0x25000 (148K) +-----------------------------------------+
+ * | KLCONFIG - II (temp) |
+ * | |
+ * | ---------------------------- |
+ * | |
+ * | UNIX NON-DEBUG Version |
+ * 0x19000 (100K) +-----------------------------------------+
+ *
+ *
+ * The lower portion of the memory map contains information that is
+ * permanent and is used by the IP27PROM, IO6PROM and IRIX.
+ *
+ * 0x19000 (100K) +-----------------------------------------+
+ * | |
+ * | PI Error Spools (32K) |
+ * | |
+ * 0x12000 (72K) +-----------------------------------------+
+ * | Unused |
+ * 0x11c00 (71K) +-----------------------------------------+
+ * | CPU 1 NMI Eframe area |
+ * 0x11a00 (70.5K) +-----------------------------------------+
+ * | CPU 0 NMI Eframe area |
+ * 0x11800 (70K) +-----------------------------------------+
+ * | CPU 1 NMI Register save area |
+ * 0x11600 (69.5K) +-----------------------------------------+
+ * | CPU 0 NMI Register save area |
+ * 0x11400 (69K) +-----------------------------------------+
+ * | GDA (1k) |
+ * 0x11000 (68K) +-----------------------------------------+
+ * | Early cache Exception stack |
+ * | and/or |
+ * | kernel/io6prom nmi registers |
+ * 0x10800 (66k) +-----------------------------------------+
+ * | cache error eframe |
+ * 0x10400 (65K) +-----------------------------------------+
+ * | Exception Handlers (UALIAS copy) |
+ * 0x10000 (64K) +-----------------------------------------+
+ * | |
+ * | |
+ * | KLCONFIG - I (permanent) (48K) |
+ * | |
+ * | |
+ * | |
+ * 0x4000 (16K) +-----------------------------------------+
+ * | NMI Handler (Protected Page) |
+ * 0x3000 (12K) +-----------------------------------------+
+ * | ARCS PVECTORS (master node only) |
+ * 0x2c00 (11K) +-----------------------------------------+
+ * | ARCS TVECTORS (master node only) |
+ * 0x2800 (10K) +-----------------------------------------+
+ * | LAUNCH [NUM_CPU] |
+ * 0x2400 (9K) +-----------------------------------------+
+ * | Low memory directory (KLDIR) |
+ * 0x2000 (8K) +-----------------------------------------+
+ * | ARCS SPB (1K) |
+ * 0x1000 (4K) +-----------------------------------------+
+ * | Early cache Exception stack |
+ * | and/or |
+ * | kernel/io6prom nmi registers |
+ * 0x800 (2k) +-----------------------------------------+
+ * | cache error eframe |
+ * 0x400 (1K) +-----------------------------------------+
+ * | Exception Handlers |
+ * 0x0 (0K) +-----------------------------------------+
+ */
+
+/*
+ * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
+ * we define here. Since it's set up in the prom. We can't redefine it later
+ * and expect more space to be allocated. The way to find out the true size
+ * of the symmon stacks is to divide SYMMON_STK_SIZE by SYMMON_STK_STRIDE
+ * for a particular node.
+ */
+#define SYMMON_STACK_SIZE 0x8000
+
+#if defined(PROM)
+
+/*
+ * These defines are prom version dependent. No code other than the IP27
+ * prom should attempt to use these values.
+ */
+#define IP27_LAUNCH_OFFSET 0x2400
+#define IP27_LAUNCH_SIZE 0x400
+#define IP27_LAUNCH_COUNT 2
+#define IP27_LAUNCH_STRIDE 0x200
+
+#define IP27_KLCONFIG_OFFSET 0x4000
+#define IP27_KLCONFIG_SIZE 0xc000
+#define IP27_KLCONFIG_COUNT 1
+#define IP27_KLCONFIG_STRIDE 0
+
+#define IP27_NMI_OFFSET 0x3000
+#define IP27_NMI_SIZE 0x40
+#define IP27_NMI_COUNT 2
+#define IP27_NMI_STRIDE 0x40
+
+#define IP27_PI_ERROR_OFFSET 0x12000
+#define IP27_PI_ERROR_SIZE 0x4000
+#define IP27_PI_ERROR_COUNT 1
+#define IP27_PI_ERROR_STRIDE 0
+
+#define IP27_SYMMON_STK_OFFSET 0x25000
+#define IP27_SYMMON_STK_SIZE 0xe000
+#define IP27_SYMMON_STK_COUNT 2
+/* IP27_SYMMON_STK_STRIDE must be >= SYMMON_STACK_SIZE */
+#define IP27_SYMMON_STK_STRIDE 0x7000
+
+#define IP27_FREEMEM_OFFSET 0x19000
+#define IP27_FREEMEM_SIZE -1
+#define IP27_FREEMEM_COUNT 1
+#define IP27_FREEMEM_STRIDE 0
+
+#endif /* PROM */
+/*
+ * There will be only one of these in a partition so the IO6 must set it up.
+ */
+#define IO6_GDA_OFFSET 0x11000
+#define IO6_GDA_SIZE 0x400
+#define IO6_GDA_COUNT 1
+#define IO6_GDA_STRIDE 0
+
+/*
+ * save area of kernel nmi regs in the prom format
+ */
+#define IP27_NMI_KREGS_OFFSET 0x11400
+#define IP27_NMI_KREGS_CPU_SIZE 0x200
+/*
+ * save area of kernel nmi regs in eframe format
+ */
+#define IP27_NMI_EFRAME_OFFSET 0x11800
+#define IP27_NMI_EFRAME_SIZE 0x200
+
+#endif /* _ASM_SN_SN0_KLDIR_H */
diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h
deleted file mode 100644
index 63a2c30d81c6..000000000000
--- a/arch/mips/include/asm/sn/sn_private.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SN_SN_PRIVATE_H
-#define __ASM_SN_SN_PRIVATE_H
-
-#include <asm/sn/types.h>
-
-extern nasid_t master_nasid;
-
-extern void cpu_node_probe(void);
-extern void hub_rtc_init(nasid_t nasid);
-extern void cpu_time_init(void);
-extern void per_cpu_init(void);
-extern void install_cpu_nmi_handler(int slice);
-extern void install_ipi(void);
-extern void setup_replication_mask(void);
-extern void replicate_kernel_text(void);
-extern unsigned long node_getfirstfree(nasid_t nasid);
-
-#endif /* __ASM_SN_SN_PRIVATE_H */
diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h
index 203c927e84d1..451ba1ee41ad 100644
--- a/arch/mips/include/asm/sn/types.h
+++ b/arch/mips/include/asm/sn/types.h
@@ -11,6 +11,8 @@
#include <linux/types.h>
+#ifndef __ASSEMBLY__
+
typedef unsigned long cpuid_t;
typedef signed short nasid_t; /* node id in numa-as-id space */
typedef signed char partid_t; /* partition ID type */
@@ -18,4 +20,6 @@ typedef signed short moduleid_t; /* user-visible module number type */
typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */
+#endif
+
#endif /* _ASM_SN_TYPES_H */
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 4dd0c446ecec..412d2faa3cdf 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -16,6 +16,10 @@ config JZ4780_CI20
bool "MIPS Creator CI20"
select MACH_JZ4780
+config X1000_CU1000_NEO
+ bool "YSH & ATIL CU1000 Module with Neo backplane"
+ select MACH_X1000
+
endchoice
config MACH_JZ4740
@@ -33,3 +37,9 @@ config MACH_JZ4780
select MIPS_CPU_SCACHE
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_HIGHMEM
+
+config MACH_X1000
+ bool
+ select MIPS_CPU_SCACHE
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_HIGHMEM
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index dc8ee21e0948..880c26857aff 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -44,6 +44,8 @@ static void __init jz4740_detect_mem(void)
static unsigned long __init get_board_mach_type(const void *fdt)
{
+ if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1830"))
+ return MACH_INGENIC_X1830;
if (!fdt_node_check_compatible(fdt, 0, "ingenic,x1000"))
return MACH_INGENIC_X1000;
if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
@@ -86,6 +88,8 @@ void __init device_tree_init(void)
const char *get_system_type(void)
{
switch (mips_machtype) {
+ case MACH_INGENIC_X1830:
+ return "X1830";
case MACH_INGENIC_X1000:
return "X1000";
case MACH_INGENIC_JZ4780:
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index c54332697673..6ab6b03d35ba 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -102,7 +102,12 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
if (fir & MIPS_FPIR_HAS2008) {
fcsr = read_32bit_cp1_register(CP1_STATUS);
- fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+ /*
+ * MAC2008 toolchain never landed in real world, so we're only
+ * testing wether it can be disabled and don't try to enabled
+ * it.
+ */
+ fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 | FPU_CSR_MAC2008);
write_32bit_cp1_register(CP1_STATUS, fcsr0);
fcsr0 = read_32bit_cp1_register(CP1_STATUS);
@@ -112,6 +117,15 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
write_32bit_cp1_register(CP1_STATUS, fcsr);
+ if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2)) {
+ /*
+ * The bit for MAC2008 might be reused by R6 in future,
+ * so we only test for R2-R5.
+ */
+ if (fcsr0 & FPU_CSR_MAC2008)
+ c->options |= MIPS_CPU_MAC_2008_ONLY;
+ }
+
if (!(fcsr0 & FPU_CSR_NAN2008))
c->options |= MIPS_CPU_NAN_LEGACY;
if (fcsr1 & FPU_CSR_NAN2008)
@@ -1960,10 +1974,8 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter);
switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_XBURST:
- c->cputype = CPU_XBURST;
- c->writecombine = _CACHE_UNCACHED_ACCELERATED;
- __cpu_name[cpu] = "Ingenic JZRISC";
+ case PRID_IMP_XBURST_REV1:
+
/*
* The XBurst core by default attempts to avoid branch target
* buffer lookups by detecting & special casing loops. This
@@ -1971,34 +1983,43 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
* Set cp0 config7 bit 4 to disable this feature.
*/
set_c0_config7(MIPS_CONF7_BTB_LOOP_EN);
- break;
- default:
- panic("Unknown Ingenic Processor ID!");
- break;
- }
- switch (c->processor_id & PRID_COMP_MASK) {
- /*
- * The config0 register in the XBurst CPUs with a processor ID of
- * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this
- * mode is not compatible with the MIPS standard, it will cause
- * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S)
- * when starting the init process. After chip reset, the default
- * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to
- * switch back to VTLB mode to prevent getting stuck.
- */
- case PRID_COMP_INGENIC_D1:
- write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS);
- break;
- /*
- * The config0 register in the XBurst CPUs with a processor ID of
- * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
- * but they don't actually support this ISA.
- */
- case PRID_COMP_INGENIC_D0:
- c->isa_level &= ~MIPS_CPU_ISA_M32R2;
+ switch (c->processor_id & PRID_COMP_MASK) {
+
+ /*
+ * The config0 register in the XBurst CPUs with a processor ID of
+ * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
+ * but they don't actually support this ISA.
+ */
+ case PRID_COMP_INGENIC_D0:
+ c->isa_level &= ~MIPS_CPU_ISA_M32R2;
+ break;
+
+ /*
+ * The config0 register in the XBurst CPUs with a processor ID of
+ * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this
+ * mode is not compatible with the MIPS standard, it will cause
+ * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S)
+ * when starting the init process. After chip reset, the default
+ * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to
+ * switch back to VTLB mode to prevent getting stuck.
+ */
+ case PRID_COMP_INGENIC_D1:
+ write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS);
+ break;
+
+ default:
+ break;
+ }
+ /* fall-through */
+ case PRID_IMP_XBURST_REV2:
+ c->cputype = CPU_XBURST;
+ c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+ __cpu_name[cpu] = "Ingenic XBurst";
break;
+
default:
+ panic("Unknown Ingenic Processor ID!");
break;
}
}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index a28057946ed1..1ac2752fb791 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -515,8 +515,7 @@ static void __init request_crashkernel(struct resource *res)
ret = request_resource(res, &crashk_res);
if (!ret)
pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n",
- (unsigned long)((crashk_res.end -
- crashk_res.start + 1) >> 20),
+ (unsigned long)(resource_size(&crashk_res) >> 20),
(unsigned long)(crashk_res.start >> 20));
}
#else /* !defined(CONFIG_KEXEC) */
@@ -698,8 +697,7 @@ static void __init arch_mem_init(char **cmdline_p)
mips_parse_crashkernel();
#ifdef CONFIG_KEXEC
if (crashk_res.start != crashk_res.end)
- memblock_reserve(crashk_res.start,
- crashk_res.end - crashk_res.start + 1);
+ memblock_reserve(crashk_res.start, resource_size(&crashk_res));
#endif
device_tree_init();
sparse_init();
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index f2973ce87f53..abdd7aaa3311 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -90,6 +90,9 @@ void synchronise_count_master(int cpu)
void synchronise_count_slave(int cpu)
{
int i;
+ unsigned long flags;
+
+ local_irq_save(flags);
/*
* Not every cpu is online at the time this gets called,
@@ -113,5 +116,7 @@ void synchronise_count_slave(int cpu)
}
/* Arrange for an interrupt in a short while */
write_c0_compare(read_c0_count() + COUNTON);
+
+ local_irq_restore(flags);
}
#undef NR_LOOPS
diff --git a/arch/mips/kernel/syscalls/Makefile b/arch/mips/kernel/syscalls/Makefile
index a3d4bec695c6..6efb2f6889a7 100644
--- a/arch/mips/kernel/syscalls/Makefile
+++ b/arch/mips/kernel/syscalls/Makefile
@@ -18,7 +18,7 @@ quiet_cmd_syshdr = SYSHDR $@
'$(syshdr_pfx_$(basetarget))' \
'$(syshdr_offset_$(basetarget))'
-quiet_cmd_sysnr = SYSNR $@
+quiet_cmd_sysnr = SYSNR $@
cmd_sysnr = $(CONFIG_SHELL) '$(sysnr)' '$<' '$@' \
'$(sysnr_abis_$(basetarget))' \
'$(sysnr_pfx_$(basetarget))' \
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 92bd2b0f0548..ca6fc4762d97 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -131,7 +131,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -152,7 +152,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
@@ -187,7 +187,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \
do { \
@@ -213,7 +213,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -256,7 +256,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
@@ -340,7 +340,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \
@@ -366,7 +366,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -407,7 +407,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -483,7 +483,7 @@ do { \
: "memory"); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#else /* __BIG_ENDIAN */
@@ -509,7 +509,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -530,7 +530,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
@@ -565,7 +565,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \
@@ -592,7 +592,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -635,7 +635,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
@@ -718,7 +718,7 @@ do { \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \
do { \
@@ -743,7 +743,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -784,7 +784,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
do { \
@@ -861,7 +861,7 @@ do { \
: "memory"); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#endif
#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index cdd19d8561e8..f7994d936505 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -301,14 +301,14 @@
and t0, src, ADDRMASK
PREFS( 0, 2*32(src) )
PREFD( 1, 2*32(dst) )
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
bnez t1, .Ldst_unaligned\@
nop
bnez t0, .Lsrc_unaligned_dst_aligned\@
-#else
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
or t0, t0, t1
bnez t0, .Lcopy_unaligned_bytes\@
-#endif
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
/*
* use delay slot for fall-through
* src and dst are aligned; need to compute rem
@@ -389,7 +389,7 @@
bne rem, len, 1b
.set noreorder
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
/*
* src and dst are aligned, need to copy rem bytes (rem < NBYTES)
* A loop would do only a byte at a time with possible branch
@@ -491,7 +491,7 @@
bne len, rem, 1b
.set noreorder
-#endif /* CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */
.Lcopy_bytes_checklen\@:
beqz len, .Ldone\@
nop
@@ -520,7 +520,7 @@
jr ra
nop
-#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lcopy_unaligned_bytes\@:
1:
COPY_BYTE(0)
@@ -534,7 +534,7 @@
ADD src, src, 8
b 1b
ADD dst, dst, 8
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.if __memcpy == 1
END(memcpy)
.set __memcpy, 0
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 418611ef13cf..d5449e8a3dfc 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -115,7 +115,7 @@
#endif
.set reorder
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
R10KCBARRIER(0(ra))
#ifdef __MIPSEB__
EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
@@ -125,7 +125,7 @@
PTR_SUBU a0, t0 /* long align ptr */
PTR_ADDU a2, t0 /* correct size */
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define STORE_BYTE(N) \
EX(sb, a1, N(a0), .Lbyte_fixup\@); \
.set noreorder; \
@@ -150,7 +150,7 @@
ori a0, STORMASK
xori a0, STORMASK
PTR_ADDIU a0, STORSIZE
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: ori t1, a2, 0x3f /* # of full blocks */
xori t1, 0x3f
andi t0, a2, 0x40-STORSIZE
@@ -185,7 +185,7 @@
.set noreorder
beqz a2, 1f
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
PTR_ADDU a0, a2 /* What's left */
.set reorder
R10KCBARRIER(0(ra))
@@ -194,7 +194,7 @@
#else
EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@)
#endif
-#else
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
PTR_SUBU t0, $0, a2
.set reorder
move a2, zero /* No remaining longs */
@@ -211,7 +211,7 @@
EX(sb, a1, 6(a0), .Lbyte_fixup\@)
#endif
0:
-#endif
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: move a2, zero
jr ra
@@ -234,7 +234,7 @@
.hidden __memset
.endif
-#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lbyte_fixup\@:
/*
* unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
@@ -243,7 +243,7 @@
PTR_SUBU a2, t0
PTR_ADDIU a2, 1
jr ra
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.Lfirst_fixup\@:
/* unset_bytes already in a2 */
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
index 5530070e0d05..de03838b343b 100644
--- a/arch/mips/lib/mips-atomic.c
+++ b/arch/mips/lib/mips-atomic.c
@@ -15,7 +15,7 @@
#include <linux/export.h>
#include <linux/stringify.h>
-#if !defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_CPU_MIPSR6)
+#if !defined(CONFIG_CPU_HAS_DIEI)
/*
* For cli() we have to insert nops to make sure that the new value
@@ -110,4 +110,4 @@ notrace void arch_local_irq_restore(unsigned long flags)
}
EXPORT_SYMBOL(arch_local_irq_restore);
-#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR6 */
+#endif /* !CONFIG_CPU_HAS_DIEI */
diff --git a/arch/mips/loongson2ef/common/pm.c b/arch/mips/loongson2ef/common/pm.c
index 11f4cfd581fb..bcb7ae9777cf 100644
--- a/arch/mips/loongson2ef/common/pm.c
+++ b/arch/mips/loongson2ef/common/pm.c
@@ -91,7 +91,7 @@ static inline void stop_perf_counters(void)
static void loongson_suspend_enter(void)
{
- static unsigned int cached_cpu_freq;
+ unsigned int cached_cpu_freq;
/* setup wakeup events via enabling the IRQs */
setup_wakeup_events();
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index ef94a2278561..e5b40c5e3296 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -75,7 +75,7 @@ static int __init compute_node_distance(int row, int col)
loongson_sysconf.cores_per_package;
if (col == row)
- return 0;
+ return LOCAL_DISTANCE;
else if (package_row == package_col)
return 40;
else
diff --git a/arch/mips/loongson64/platform.c b/arch/mips/loongson64/platform.c
index 13f3404f0030..9674ae1361a8 100644
--- a/arch/mips/loongson64/platform.c
+++ b/arch/mips/loongson64/platform.c
@@ -27,6 +27,9 @@ static int __init loongson3_platform_init(void)
continue;
pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
pdev->name = loongson_sysconf.sensors[i].name;
pdev->id = loongson_sysconf.sensors[i].id;
pdev->dev.platform_data = &loongson_sysconf.sensors[i];
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 710e1f804a54..9701c89e7e14 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1514,16 +1514,28 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
break;
case madd_s_op:
- handler = fpemu_sp_madd;
+ if (cpu_has_mac2008_only)
+ handler = ieee754sp_madd;
+ else
+ handler = fpemu_sp_madd;
goto scoptop;
case msub_s_op:
- handler = fpemu_sp_msub;
+ if (cpu_has_mac2008_only)
+ handler = ieee754sp_msub;
+ else
+ handler = fpemu_sp_msub;
goto scoptop;
case nmadd_s_op:
- handler = fpemu_sp_nmadd;
+ if (cpu_has_mac2008_only)
+ handler = ieee754sp_nmadd;
+ else
+ handler = fpemu_sp_nmadd;
goto scoptop;
case nmsub_s_op:
- handler = fpemu_sp_nmsub;
+ if (cpu_has_mac2008_only)
+ handler = ieee754sp_nmsub;
+ else
+ handler = fpemu_sp_nmsub;
goto scoptop;
scoptop:
@@ -1610,15 +1622,27 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
break;
case madd_d_op:
- handler = fpemu_dp_madd;
+ if (cpu_has_mac2008_only)
+ handler = ieee754dp_madd;
+ else
+ handler = fpemu_dp_madd;
goto dcoptop;
case msub_d_op:
- handler = fpemu_dp_msub;
+ if (cpu_has_mac2008_only)
+ handler = ieee754dp_msub;
+ else
+ handler = fpemu_dp_msub;
goto dcoptop;
case nmadd_d_op:
- handler = fpemu_dp_nmadd;
+ if (cpu_has_mac2008_only)
+ handler = ieee754dp_nmadd;
+ else
+ handler = fpemu_dp_nmadd;
goto dcoptop;
case nmsub_d_op:
+ if (cpu_has_mac2008_only)
+ handler = ieee754dp_nmsub;
+ else
handler = fpemu_dp_nmsub;
goto dcoptop;
diff --git a/arch/mips/math-emu/dp_maddf.c b/arch/mips/math-emu/dp_maddf.c
index 3da0ce44cdef..e24ef374d828 100644
--- a/arch/mips/math-emu/dp_maddf.c
+++ b/arch/mips/math-emu/dp_maddf.c
@@ -68,6 +68,12 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
ieee754_clearcx();
+ rs = xs ^ ys;
+ if (flags & MADDF_NEGATE_PRODUCT)
+ rs ^= 1;
+ if (flags & MADDF_NEGATE_ADDITION)
+ zs ^= 1;
+
/*
* Handle the cases when at least one of x, y or z is a NaN.
* Order of precedence is sNaN, qNaN and z, x, y.
@@ -104,9 +110,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_NORM):
case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_DNORM):
case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_INF):
- if ((zc == IEEE754_CLASS_INF) &&
- ((!(flags & MADDF_NEGATE_PRODUCT) && (zs != (xs ^ ys))) ||
- ((flags & MADDF_NEGATE_PRODUCT) && (zs == (xs ^ ys))))) {
+ if ((zc == IEEE754_CLASS_INF) && (zs != rs)) {
/*
* Cases of addition of infinities with opposite signs
* or subtraction of infinities with same signs.
@@ -116,15 +120,10 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
}
/*
* z is here either not an infinity, or an infinity having the
- * same sign as product (x*y) (in case of MADDF.D instruction)
- * or product -(x*y) (in MSUBF.D case). The result must be an
- * infinity, and its sign is determined only by the value of
- * (flags & MADDF_NEGATE_PRODUCT) and the signs of x and y.
+ * same sign as product (x*y). The result must be an infinity,
+ * and its sign is determined only by the sign of product (x*y).
*/
- if (flags & MADDF_NEGATE_PRODUCT)
- return ieee754dp_inf(1 ^ (xs ^ ys));
- else
- return ieee754dp_inf(xs ^ ys);
+ return ieee754dp_inf(rs);
case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_ZERO):
case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_NORM):
@@ -135,10 +134,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
return ieee754dp_inf(zs);
if (zc == IEEE754_CLASS_ZERO) {
/* Handle cases +0 + (-0) and similar ones. */
- if ((!(flags & MADDF_NEGATE_PRODUCT)
- && (zs == (xs ^ ys))) ||
- ((flags & MADDF_NEGATE_PRODUCT)
- && (zs != (xs ^ ys))))
+ if (zs == rs)
/*
* Cases of addition of zeros of equal signs
* or subtraction of zeroes of opposite signs.
@@ -187,9 +183,6 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
assert(ym & DP_HIDDEN_BIT);
re = xe + ye;
- rs = xs ^ ys;
- if (flags & MADDF_NEGATE_PRODUCT)
- rs ^= 1;
/* shunt to top of word */
xm <<= 64 - (DP_FBITS + 1);
@@ -340,3 +333,27 @@ union ieee754dp ieee754dp_msubf(union ieee754dp z, union ieee754dp x,
{
return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
}
+
+union ieee754dp ieee754dp_madd(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y)
+{
+ return _dp_maddf(z, x, y, 0);
+}
+
+union ieee754dp ieee754dp_msub(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y)
+{
+ return _dp_maddf(z, x, y, MADDF_NEGATE_ADDITION);
+}
+
+union ieee754dp ieee754dp_nmadd(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y)
+{
+ return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT|MADDF_NEGATE_ADDITION);
+}
+
+union ieee754dp ieee754dp_nmsub(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y)
+{
+ return _dp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
+}
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index b9167bd4eb60..090caa740b1e 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -68,6 +68,14 @@ union ieee754sp ieee754sp_maddf(union ieee754sp z, union ieee754sp x,
union ieee754sp y);
union ieee754sp ieee754sp_msubf(union ieee754sp z, union ieee754sp x,
union ieee754sp y);
+union ieee754sp ieee754sp_madd(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y);
+union ieee754sp ieee754sp_msub(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y);
+union ieee754sp ieee754sp_nmadd(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y);
+union ieee754sp ieee754sp_nmsub(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y);
int ieee754sp_2008class(union ieee754sp x);
union ieee754sp ieee754sp_fmin(union ieee754sp x, union ieee754sp y);
union ieee754sp ieee754sp_fmina(union ieee754sp x, union ieee754sp y);
@@ -103,6 +111,14 @@ union ieee754dp ieee754dp_maddf(union ieee754dp z, union ieee754dp x,
union ieee754dp y);
union ieee754dp ieee754dp_msubf(union ieee754dp z, union ieee754dp x,
union ieee754dp y);
+union ieee754dp ieee754dp_madd(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y);
+union ieee754dp ieee754dp_msub(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y);
+union ieee754dp ieee754dp_nmadd(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y);
+union ieee754dp ieee754dp_nmsub(union ieee754dp z, union ieee754dp x,
+ union ieee754dp y);
int ieee754dp_2008class(union ieee754dp x);
union ieee754dp ieee754dp_fmin(union ieee754dp x, union ieee754dp y);
union ieee754dp ieee754dp_fmina(union ieee754dp x, union ieee754dp y);
diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h
index 52b20119e315..2c3b13546ac8 100644
--- a/arch/mips/math-emu/ieee754int.h
+++ b/arch/mips/math-emu/ieee754int.h
@@ -16,6 +16,7 @@
enum maddf_flags {
MADDF_NEGATE_PRODUCT = 1 << 0,
+ MADDF_NEGATE_ADDITION = 1 << 1,
};
static inline void ieee754_clearcx(void)
diff --git a/arch/mips/math-emu/sp_maddf.c b/arch/mips/math-emu/sp_maddf.c
index d638354add6d..1b85b1a527ac 100644
--- a/arch/mips/math-emu/sp_maddf.c
+++ b/arch/mips/math-emu/sp_maddf.c
@@ -36,6 +36,12 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
ieee754_clearcx();
+ rs = xs ^ ys;
+ if (flags & MADDF_NEGATE_PRODUCT)
+ rs ^= 1;
+ if (flags & MADDF_NEGATE_ADDITION)
+ zs ^= 1;
+
/*
* Handle the cases when at least one of x, y or z is a NaN.
* Order of precedence is sNaN, qNaN and z, x, y.
@@ -73,9 +79,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_NORM):
case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_DNORM):
case CLPAIR(IEEE754_CLASS_INF, IEEE754_CLASS_INF):
- if ((zc == IEEE754_CLASS_INF) &&
- ((!(flags & MADDF_NEGATE_PRODUCT) && (zs != (xs ^ ys))) ||
- ((flags & MADDF_NEGATE_PRODUCT) && (zs == (xs ^ ys))))) {
+ if ((zc == IEEE754_CLASS_INF) && (zs != rs)) {
/*
* Cases of addition of infinities with opposite signs
* or subtraction of infinities with same signs.
@@ -85,15 +89,10 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
}
/*
* z is here either not an infinity, or an infinity having the
- * same sign as product (x*y) (in case of MADDF.D instruction)
- * or product -(x*y) (in MSUBF.D case). The result must be an
- * infinity, and its sign is determined only by the value of
- * (flags & MADDF_NEGATE_PRODUCT) and the signs of x and y.
+ * same sign as product (x*y). The result must be an infinity,
+ * and its sign is determined only by the sign of product (x*y).
*/
- if (flags & MADDF_NEGATE_PRODUCT)
- return ieee754sp_inf(1 ^ (xs ^ ys));
- else
- return ieee754sp_inf(xs ^ ys);
+ return ieee754sp_inf(rs);
case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_ZERO):
case CLPAIR(IEEE754_CLASS_ZERO, IEEE754_CLASS_NORM):
@@ -104,10 +103,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
return ieee754sp_inf(zs);
if (zc == IEEE754_CLASS_ZERO) {
/* Handle cases +0 + (-0) and similar ones. */
- if ((!(flags & MADDF_NEGATE_PRODUCT)
- && (zs == (xs ^ ys))) ||
- ((flags & MADDF_NEGATE_PRODUCT)
- && (zs != (xs ^ ys))))
+ if (zs == rs)
/*
* Cases of addition of zeros of equal signs
* or subtraction of zeroes of opposite signs.
@@ -158,9 +154,6 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
assert(ym & SP_HIDDEN_BIT);
re = xe + ye;
- rs = xs ^ ys;
- if (flags & MADDF_NEGATE_PRODUCT)
- rs ^= 1;
/* Multiple 24 bit xm and ym to give 48 bit results */
rm64 = (uint64_t)xm * ym;
@@ -260,3 +253,27 @@ union ieee754sp ieee754sp_msubf(union ieee754sp z, union ieee754sp x,
{
return _sp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
}
+
+union ieee754sp ieee754sp_madd(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y)
+{
+ return _sp_maddf(z, x, y, 0);
+}
+
+union ieee754sp ieee754sp_msub(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y)
+{
+ return _sp_maddf(z, x, y, MADDF_NEGATE_ADDITION);
+}
+
+union ieee754sp ieee754sp_nmadd(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y)
+{
+ return _sp_maddf(z, x, y, MADDF_NEGATE_PRODUCT|MADDF_NEGATE_ADDITION);
+}
+
+union ieee754sp ieee754sp_nmsub(union ieee754sp z, union ieee754sp x,
+ union ieee754sp y)
+{
+ return _sp_maddf(z, x, y, MADDF_NEGATE_PRODUCT);
+}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 50f9ed8c6c1b..79684000de0e 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -508,6 +508,51 @@ void __ref free_initmem(void)
free_initmem_default(POISON_FREE_INITMEM);
}
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+ return node_distance(cpu_to_node(from), cpu_to_node(to));
+}
+
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size,
+ size_t align)
+{
+ return memblock_alloc_try_nid(size, align, __pa(MAX_DMA_ADDRESS),
+ MEMBLOCK_ALLOC_ACCESSIBLE,
+ cpu_to_node(cpu));
+}
+
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+ memblock_free_early(__pa(ptr), size);
+}
+
+void __init setup_per_cpu_areas(void)
+{
+ unsigned long delta;
+ unsigned int cpu;
+ int rc;
+
+ /*
+ * Always reserve area for module percpu variables. That's
+ * what the legacy allocator did.
+ */
+ rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+ PERCPU_DYNAMIC_RESERVE, PAGE_SIZE,
+ pcpu_cpu_distance,
+ pcpu_fc_alloc, pcpu_fc_free);
+ if (rc < 0)
+ panic("Failed to initialize percpu areas.");
+
+ delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+ for_each_possible_cpu(cpu)
+ __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+}
+#endif
+
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
unsigned long pgd_current[NR_CPUS];
#endif
diff --git a/arch/mips/net/Makefile b/arch/mips/net/Makefile
index 2d03af7d6b19..d55912349039 100644
--- a/arch/mips/net/Makefile
+++ b/arch/mips/net/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
# MIPS networking code
+obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
new file mode 100644
index 000000000000..0af88622c619
--- /dev/null
+++ b/arch/mips/net/bpf_jit.c
@@ -0,0 +1,1270 @@
+/*
+ * Just-In-Time compiler for BPF filters on MIPS
+ *
+ * Copyright (c) 2014 Imagination Technologies Ltd.
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/filter.h>
+#include <linux/if_vlan.h>
+#include <linux/moduleloader.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <asm/asm.h>
+#include <asm/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu-features.h>
+#include <asm/uasm.h>
+
+#include "bpf_jit.h"
+
+/* ABI
+ * r_skb_hl SKB header length
+ * r_data SKB data pointer
+ * r_off Offset
+ * r_A BPF register A
+ * r_X BPF register X
+ * r_skb *skb
+ * r_M *scratch memory
+ * r_skb_len SKB length
+ *
+ * On entry (*bpf_func)(*skb, *filter)
+ * a0 = MIPS_R_A0 = skb;
+ * a1 = MIPS_R_A1 = filter;
+ *
+ * Stack
+ * ...
+ * M[15]
+ * M[14]
+ * M[13]
+ * ...
+ * M[0] <-- r_M
+ * saved reg k-1
+ * saved reg k-2
+ * ...
+ * saved reg 0 <-- r_sp
+ * <no argument area>
+ *
+ * Packet layout
+ *
+ * <--------------------- len ------------------------>
+ * <--skb-len(r_skb_hl)-->< ----- skb->data_len ------>
+ * ----------------------------------------------------
+ * | skb->data |
+ * ----------------------------------------------------
+ */
+
+#define ptr typeof(unsigned long)
+
+#define SCRATCH_OFF(k) (4 * (k))
+
+/* JIT flags */
+#define SEEN_CALL (1 << BPF_MEMWORDS)
+#define SEEN_SREG_SFT (BPF_MEMWORDS + 1)
+#define SEEN_SREG_BASE (1 << SEEN_SREG_SFT)
+#define SEEN_SREG(x) (SEEN_SREG_BASE << (x))
+#define SEEN_OFF SEEN_SREG(2)
+#define SEEN_A SEEN_SREG(3)
+#define SEEN_X SEEN_SREG(4)
+#define SEEN_SKB SEEN_SREG(5)
+#define SEEN_MEM SEEN_SREG(6)
+/* SEEN_SK_DATA also implies skb_hl an skb_len */
+#define SEEN_SKB_DATA (SEEN_SREG(7) | SEEN_SREG(1) | SEEN_SREG(0))
+
+/* Arguments used by JIT */
+#define ARGS_USED_BY_JIT 2 /* only applicable to 64-bit */
+
+#define SBIT(x) (1 << (x)) /* Signed version of BIT() */
+
+/**
+ * struct jit_ctx - JIT context
+ * @skf: The sk_filter
+ * @prologue_bytes: Number of bytes for prologue
+ * @idx: Instruction index
+ * @flags: JIT flags
+ * @offsets: Instruction offsets
+ * @target: Memory location for the compiled filter
+ */
+struct jit_ctx {
+ const struct bpf_prog *skf;
+ unsigned int prologue_bytes;
+ u32 idx;
+ u32 flags;
+ u32 *offsets;
+ u32 *target;
+};
+
+
+static inline int optimize_div(u32 *k)
+{
+ /* power of 2 divides can be implemented with right shift */
+ if (!(*k & (*k-1))) {
+ *k = ilog2(*k);
+ return 1;
+ }
+
+ return 0;
+}
+
+static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx);
+
+/* Simply emit the instruction if the JIT memory space has been allocated */
+#define emit_instr(ctx, func, ...) \
+do { \
+ if ((ctx)->target != NULL) { \
+ u32 *p = &(ctx)->target[ctx->idx]; \
+ uasm_i_##func(&p, ##__VA_ARGS__); \
+ } \
+ (ctx)->idx++; \
+} while (0)
+
+/*
+ * Similar to emit_instr but it must be used when we need to emit
+ * 32-bit or 64-bit instructions
+ */
+#define emit_long_instr(ctx, func, ...) \
+do { \
+ if ((ctx)->target != NULL) { \
+ u32 *p = &(ctx)->target[ctx->idx]; \
+ UASM_i_##func(&p, ##__VA_ARGS__); \
+ } \
+ (ctx)->idx++; \
+} while (0)
+
+/* Determine if immediate is within the 16-bit signed range */
+static inline bool is_range16(s32 imm)
+{
+ return !(imm >= SBIT(15) || imm < -SBIT(15));
+}
+
+static inline void emit_addu(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, addu, dst, src1, src2);
+}
+
+static inline void emit_nop(struct jit_ctx *ctx)
+{
+ emit_instr(ctx, nop);
+}
+
+/* Load a u32 immediate to a register */
+static inline void emit_load_imm(unsigned int dst, u32 imm, struct jit_ctx *ctx)
+{
+ if (ctx->target != NULL) {
+ /* addiu can only handle s16 */
+ if (!is_range16(imm)) {
+ u32 *p = &ctx->target[ctx->idx];
+ uasm_i_lui(&p, r_tmp_imm, (s32)imm >> 16);
+ p = &ctx->target[ctx->idx + 1];
+ uasm_i_ori(&p, dst, r_tmp_imm, imm & 0xffff);
+ } else {
+ u32 *p = &ctx->target[ctx->idx];
+ uasm_i_addiu(&p, dst, r_zero, imm);
+ }
+ }
+ ctx->idx++;
+
+ if (!is_range16(imm))
+ ctx->idx++;
+}
+
+static inline void emit_or(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, or, dst, src1, src2);
+}
+
+static inline void emit_ori(unsigned int dst, unsigned src, u32 imm,
+ struct jit_ctx *ctx)
+{
+ if (imm >= BIT(16)) {
+ emit_load_imm(r_tmp, imm, ctx);
+ emit_or(dst, src, r_tmp, ctx);
+ } else {
+ emit_instr(ctx, ori, dst, src, imm);
+ }
+}
+
+static inline void emit_daddiu(unsigned int dst, unsigned int src,
+ int imm, struct jit_ctx *ctx)
+{
+ /*
+ * Only used for stack, so the imm is relatively small
+ * and it fits in 15-bits
+ */
+ emit_instr(ctx, daddiu, dst, src, imm);
+}
+
+static inline void emit_addiu(unsigned int dst, unsigned int src,
+ u32 imm, struct jit_ctx *ctx)
+{
+ if (!is_range16(imm)) {
+ emit_load_imm(r_tmp, imm, ctx);
+ emit_addu(dst, r_tmp, src, ctx);
+ } else {
+ emit_instr(ctx, addiu, dst, src, imm);
+ }
+}
+
+static inline void emit_and(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, and, dst, src1, src2);
+}
+
+static inline void emit_andi(unsigned int dst, unsigned int src,
+ u32 imm, struct jit_ctx *ctx)
+{
+ /* If imm does not fit in u16 then load it to register */
+ if (imm >= BIT(16)) {
+ emit_load_imm(r_tmp, imm, ctx);
+ emit_and(dst, src, r_tmp, ctx);
+ } else {
+ emit_instr(ctx, andi, dst, src, imm);
+ }
+}
+
+static inline void emit_xor(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, xor, dst, src1, src2);
+}
+
+static inline void emit_xori(ptr dst, ptr src, u32 imm, struct jit_ctx *ctx)
+{
+ /* If imm does not fit in u16 then load it to register */
+ if (imm >= BIT(16)) {
+ emit_load_imm(r_tmp, imm, ctx);
+ emit_xor(dst, src, r_tmp, ctx);
+ } else {
+ emit_instr(ctx, xori, dst, src, imm);
+ }
+}
+
+static inline void emit_stack_offset(int offset, struct jit_ctx *ctx)
+{
+ emit_long_instr(ctx, ADDIU, r_sp, r_sp, offset);
+}
+
+static inline void emit_subu(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, subu, dst, src1, src2);
+}
+
+static inline void emit_neg(unsigned int reg, struct jit_ctx *ctx)
+{
+ emit_subu(reg, r_zero, reg, ctx);
+}
+
+static inline void emit_sllv(unsigned int dst, unsigned int src,
+ unsigned int sa, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, sllv, dst, src, sa);
+}
+
+static inline void emit_sll(unsigned int dst, unsigned int src,
+ unsigned int sa, struct jit_ctx *ctx)
+{
+ /* sa is 5-bits long */
+ if (sa >= BIT(5))
+ /* Shifting >= 32 results in zero */
+ emit_jit_reg_move(dst, r_zero, ctx);
+ else
+ emit_instr(ctx, sll, dst, src, sa);
+}
+
+static inline void emit_srlv(unsigned int dst, unsigned int src,
+ unsigned int sa, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, srlv, dst, src, sa);
+}
+
+static inline void emit_srl(unsigned int dst, unsigned int src,
+ unsigned int sa, struct jit_ctx *ctx)
+{
+ /* sa is 5-bits long */
+ if (sa >= BIT(5))
+ /* Shifting >= 32 results in zero */
+ emit_jit_reg_move(dst, r_zero, ctx);
+ else
+ emit_instr(ctx, srl, dst, src, sa);
+}
+
+static inline void emit_slt(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, slt, dst, src1, src2);
+}
+
+static inline void emit_sltu(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, sltu, dst, src1, src2);
+}
+
+static inline void emit_sltiu(unsigned dst, unsigned int src,
+ unsigned int imm, struct jit_ctx *ctx)
+{
+ /* 16 bit immediate */
+ if (!is_range16((s32)imm)) {
+ emit_load_imm(r_tmp, imm, ctx);
+ emit_sltu(dst, src, r_tmp, ctx);
+ } else {
+ emit_instr(ctx, sltiu, dst, src, imm);
+ }
+
+}
+
+/* Store register on the stack */
+static inline void emit_store_stack_reg(ptr reg, ptr base,
+ unsigned int offset,
+ struct jit_ctx *ctx)
+{
+ emit_long_instr(ctx, SW, reg, offset, base);
+}
+
+static inline void emit_store(ptr reg, ptr base, unsigned int offset,
+ struct jit_ctx *ctx)
+{
+ emit_instr(ctx, sw, reg, offset, base);
+}
+
+static inline void emit_load_stack_reg(ptr reg, ptr base,
+ unsigned int offset,
+ struct jit_ctx *ctx)
+{
+ emit_long_instr(ctx, LW, reg, offset, base);
+}
+
+static inline void emit_load(unsigned int reg, unsigned int base,
+ unsigned int offset, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, lw, reg, offset, base);
+}
+
+static inline void emit_load_byte(unsigned int reg, unsigned int base,
+ unsigned int offset, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, lb, reg, offset, base);
+}
+
+static inline void emit_half_load(unsigned int reg, unsigned int base,
+ unsigned int offset, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, lh, reg, offset, base);
+}
+
+static inline void emit_half_load_unsigned(unsigned int reg, unsigned int base,
+ unsigned int offset, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, lhu, reg, offset, base);
+}
+
+static inline void emit_mul(unsigned int dst, unsigned int src1,
+ unsigned int src2, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, mul, dst, src1, src2);
+}
+
+static inline void emit_div(unsigned int dst, unsigned int src,
+ struct jit_ctx *ctx)
+{
+ if (ctx->target != NULL) {
+ u32 *p = &ctx->target[ctx->idx];
+ uasm_i_divu(&p, dst, src);
+ p = &ctx->target[ctx->idx + 1];
+ uasm_i_mflo(&p, dst);
+ }
+ ctx->idx += 2; /* 2 insts */
+}
+
+static inline void emit_mod(unsigned int dst, unsigned int src,
+ struct jit_ctx *ctx)
+{
+ if (ctx->target != NULL) {
+ u32 *p = &ctx->target[ctx->idx];
+ uasm_i_divu(&p, dst, src);
+ p = &ctx->target[ctx->idx + 1];
+ uasm_i_mfhi(&p, dst);
+ }
+ ctx->idx += 2; /* 2 insts */
+}
+
+static inline void emit_dsll(unsigned int dst, unsigned int src,
+ unsigned int sa, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, dsll, dst, src, sa);
+}
+
+static inline void emit_dsrl32(unsigned int dst, unsigned int src,
+ unsigned int sa, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, dsrl32, dst, src, sa);
+}
+
+static inline void emit_wsbh(unsigned int dst, unsigned int src,
+ struct jit_ctx *ctx)
+{
+ emit_instr(ctx, wsbh, dst, src);
+}
+
+/* load pointer to register */
+static inline void emit_load_ptr(unsigned int dst, unsigned int src,
+ int imm, struct jit_ctx *ctx)
+{
+ /* src contains the base addr of the 32/64-pointer */
+ emit_long_instr(ctx, LW, dst, imm, src);
+}
+
+/* load a function pointer to register */
+static inline void emit_load_func(unsigned int reg, ptr imm,
+ struct jit_ctx *ctx)
+{
+ if (IS_ENABLED(CONFIG_64BIT)) {
+ /* At this point imm is always 64-bit */
+ emit_load_imm(r_tmp, (u64)imm >> 32, ctx);
+ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
+ emit_ori(r_tmp, r_tmp_imm, (imm >> 16) & 0xffff, ctx);
+ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
+ emit_ori(reg, r_tmp_imm, imm & 0xffff, ctx);
+ } else {
+ emit_load_imm(reg, imm, ctx);
+ }
+}
+
+/* Move to real MIPS register */
+static inline void emit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
+{
+ emit_long_instr(ctx, ADDU, dst, src, r_zero);
+}
+
+/* Move to JIT (32-bit) register */
+static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
+{
+ emit_addu(dst, src, r_zero, ctx);
+}
+
+/* Compute the immediate value for PC-relative branches. */
+static inline u32 b_imm(unsigned int tgt, struct jit_ctx *ctx)
+{
+ if (ctx->target == NULL)
+ return 0;
+
+ /*
+ * We want a pc-relative branch. We only do forward branches
+ * so tgt is always after pc. tgt is the instruction offset
+ * we want to jump to.
+
+ * Branch on MIPS:
+ * I: target_offset <- sign_extend(offset)
+ * I+1: PC += target_offset (delay slot)
+ *
+ * ctx->idx currently points to the branch instruction
+ * but the offset is added to the delay slot so we need
+ * to subtract 4.
+ */
+ return ctx->offsets[tgt] -
+ (ctx->idx * 4 - ctx->prologue_bytes) - 4;
+}
+
+static inline void emit_bcond(int cond, unsigned int reg1, unsigned int reg2,
+ unsigned int imm, struct jit_ctx *ctx)
+{
+ if (ctx->target != NULL) {
+ u32 *p = &ctx->target[ctx->idx];
+
+ switch (cond) {
+ case MIPS_COND_EQ:
+ uasm_i_beq(&p, reg1, reg2, imm);
+ break;
+ case MIPS_COND_NE:
+ uasm_i_bne(&p, reg1, reg2, imm);
+ break;
+ case MIPS_COND_ALL:
+ uasm_i_b(&p, imm);
+ break;
+ default:
+ pr_warn("%s: Unhandled branch conditional: %d\n",
+ __func__, cond);
+ }
+ }
+ ctx->idx++;
+}
+
+static inline void emit_b(unsigned int imm, struct jit_ctx *ctx)
+{
+ emit_bcond(MIPS_COND_ALL, r_zero, r_zero, imm, ctx);
+}
+
+static inline void emit_jalr(unsigned int link, unsigned int reg,
+ struct jit_ctx *ctx)
+{
+ emit_instr(ctx, jalr, link, reg);
+}
+
+static inline void emit_jr(unsigned int reg, struct jit_ctx *ctx)
+{
+ emit_instr(ctx, jr, reg);
+}
+
+static inline u16 align_sp(unsigned int num)
+{
+ /* Double word alignment for 32-bit, quadword for 64-bit */
+ unsigned int align = IS_ENABLED(CONFIG_64BIT) ? 16 : 8;
+ num = (num + (align - 1)) & -align;
+ return num;
+}
+
+static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
+{
+ int i = 0, real_off = 0;
+ u32 sflags, tmp_flags;
+
+ /* Adjust the stack pointer */
+ if (offset)
+ emit_stack_offset(-align_sp(offset), ctx);
+
+ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
+ /* sflags is essentially a bitmap */
+ while (tmp_flags) {
+ if ((sflags >> i) & 0x1) {
+ emit_store_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
+ ctx);
+ real_off += SZREG;
+ }
+ i++;
+ tmp_flags >>= 1;
+ }
+
+ /* save return address */
+ if (ctx->flags & SEEN_CALL) {
+ emit_store_stack_reg(r_ra, r_sp, real_off, ctx);
+ real_off += SZREG;
+ }
+
+ /* Setup r_M leaving the alignment gap if necessary */
+ if (ctx->flags & SEEN_MEM) {
+ if (real_off % (SZREG * 2))
+ real_off += SZREG;
+ emit_long_instr(ctx, ADDIU, r_M, r_sp, real_off);
+ }
+}
+
+static void restore_bpf_jit_regs(struct jit_ctx *ctx,
+ unsigned int offset)
+{
+ int i, real_off = 0;
+ u32 sflags, tmp_flags;
+
+ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
+ /* sflags is a bitmap */
+ i = 0;
+ while (tmp_flags) {
+ if ((sflags >> i) & 0x1) {
+ emit_load_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
+ ctx);
+ real_off += SZREG;
+ }
+ i++;
+ tmp_flags >>= 1;
+ }
+
+ /* restore return address */
+ if (ctx->flags & SEEN_CALL)
+ emit_load_stack_reg(r_ra, r_sp, real_off, ctx);
+
+ /* Restore the sp and discard the scrach memory */
+ if (offset)
+ emit_stack_offset(align_sp(offset), ctx);
+}
+
+static unsigned int get_stack_depth(struct jit_ctx *ctx)
+{
+ int sp_off = 0;
+
+
+ /* How may s* regs do we need to preserved? */
+ sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * SZREG;
+
+ if (ctx->flags & SEEN_MEM)
+ sp_off += 4 * BPF_MEMWORDS; /* BPF_MEMWORDS are 32-bit */
+
+ if (ctx->flags & SEEN_CALL)
+ sp_off += SZREG; /* Space for our ra register */
+
+ return sp_off;
+}
+
+static void build_prologue(struct jit_ctx *ctx)
+{
+ int sp_off;
+
+ /* Calculate the total offset for the stack pointer */
+ sp_off = get_stack_depth(ctx);
+ save_bpf_jit_regs(ctx, sp_off);
+
+ if (ctx->flags & SEEN_SKB)
+ emit_reg_move(r_skb, MIPS_R_A0, ctx);
+
+ if (ctx->flags & SEEN_SKB_DATA) {
+ /* Load packet length */
+ emit_load(r_skb_len, r_skb, offsetof(struct sk_buff, len),
+ ctx);
+ emit_load(r_tmp, r_skb, offsetof(struct sk_buff, data_len),
+ ctx);
+ /* Load the data pointer */
+ emit_load_ptr(r_skb_data, r_skb,
+ offsetof(struct sk_buff, data), ctx);
+ /* Load the header length */
+ emit_subu(r_skb_hl, r_skb_len, r_tmp, ctx);
+ }
+
+ if (ctx->flags & SEEN_X)
+ emit_jit_reg_move(r_X, r_zero, ctx);
+
+ /*
+ * Do not leak kernel data to userspace, we only need to clear
+ * r_A if it is ever used. In fact if it is never used, we
+ * will not save/restore it, so clearing it in this case would
+ * corrupt the state of the caller.
+ */
+ if (bpf_needs_clear_a(&ctx->skf->insns[0]) &&
+ (ctx->flags & SEEN_A))
+ emit_jit_reg_move(r_A, r_zero, ctx);
+}
+
+static void build_epilogue(struct jit_ctx *ctx)
+{
+ unsigned int sp_off;
+
+ /* Calculate the total offset for the stack pointer */
+
+ sp_off = get_stack_depth(ctx);
+ restore_bpf_jit_regs(ctx, sp_off);
+
+ /* Return */
+ emit_jr(r_ra, ctx);
+ emit_nop(ctx);
+}
+
+#define CHOOSE_LOAD_FUNC(K, func) \
+ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \
+ func##_positive)
+
+static int build_body(struct jit_ctx *ctx)
+{
+ const struct bpf_prog *prog = ctx->skf;
+ const struct sock_filter *inst;
+ unsigned int i, off, condt;
+ u32 k, b_off __maybe_unused;
+ u8 (*sk_load_func)(unsigned long *skb, int offset);
+
+ for (i = 0; i < prog->len; i++) {
+ u16 code;
+
+ inst = &(prog->insns[i]);
+ pr_debug("%s: code->0x%02x, jt->0x%x, jf->0x%x, k->0x%x\n",
+ __func__, inst->code, inst->jt, inst->jf, inst->k);
+ k = inst->k;
+ code = bpf_anc_helper(inst);
+
+ if (ctx->target == NULL)
+ ctx->offsets[i] = ctx->idx * 4;
+
+ switch (code) {
+ case BPF_LD | BPF_IMM:
+ /* A <- k ==> li r_A, k */
+ ctx->flags |= SEEN_A;
+ emit_load_imm(r_A, k, ctx);
+ break;
+ case BPF_LD | BPF_W | BPF_LEN:
+ BUILD_BUG_ON(sizeof_field(struct sk_buff, len) != 4);
+ /* A <- len ==> lw r_A, offset(skb) */
+ ctx->flags |= SEEN_SKB | SEEN_A;
+ off = offsetof(struct sk_buff, len);
+ emit_load(r_A, r_skb, off, ctx);
+ break;
+ case BPF_LD | BPF_MEM:
+ /* A <- M[k] ==> lw r_A, offset(M) */
+ ctx->flags |= SEEN_MEM | SEEN_A;
+ emit_load(r_A, r_M, SCRATCH_OFF(k), ctx);
+ break;
+ case BPF_LD | BPF_W | BPF_ABS:
+ /* A <- P[k:4] */
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_word);
+ goto load;
+ case BPF_LD | BPF_H | BPF_ABS:
+ /* A <- P[k:2] */
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_half);
+ goto load;
+ case BPF_LD | BPF_B | BPF_ABS:
+ /* A <- P[k:1] */
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_byte);
+load:
+ emit_load_imm(r_off, k, ctx);
+load_common:
+ ctx->flags |= SEEN_CALL | SEEN_OFF |
+ SEEN_SKB | SEEN_A | SEEN_SKB_DATA;
+
+ emit_load_func(r_s0, (ptr)sk_load_func, ctx);
+ emit_reg_move(MIPS_R_A0, r_skb, ctx);
+ emit_jalr(MIPS_R_RA, r_s0, ctx);
+ /* Load second argument to delay slot */
+ emit_reg_move(MIPS_R_A1, r_off, ctx);
+ /* Check the error value */
+ emit_bcond(MIPS_COND_EQ, r_ret, 0, b_imm(i + 1, ctx),
+ ctx);
+ /* Load return register on DS for failures */
+ emit_reg_move(r_ret, r_zero, ctx);
+ /* Return with error */
+ emit_b(b_imm(prog->len, ctx), ctx);
+ emit_nop(ctx);
+ break;
+ case BPF_LD | BPF_W | BPF_IND:
+ /* A <- P[X + k:4] */
+ sk_load_func = sk_load_word;
+ goto load_ind;
+ case BPF_LD | BPF_H | BPF_IND:
+ /* A <- P[X + k:2] */
+ sk_load_func = sk_load_half;
+ goto load_ind;
+ case BPF_LD | BPF_B | BPF_IND:
+ /* A <- P[X + k:1] */
+ sk_load_func = sk_load_byte;
+load_ind:
+ ctx->flags |= SEEN_OFF | SEEN_X;
+ emit_addiu(r_off, r_X, k, ctx);
+ goto load_common;
+ case BPF_LDX | BPF_IMM:
+ /* X <- k */
+ ctx->flags |= SEEN_X;
+ emit_load_imm(r_X, k, ctx);
+ break;
+ case BPF_LDX | BPF_MEM:
+ /* X <- M[k] */
+ ctx->flags |= SEEN_X | SEEN_MEM;
+ emit_load(r_X, r_M, SCRATCH_OFF(k), ctx);
+ break;
+ case BPF_LDX | BPF_W | BPF_LEN:
+ /* X <- len */
+ ctx->flags |= SEEN_X | SEEN_SKB;
+ off = offsetof(struct sk_buff, len);
+ emit_load(r_X, r_skb, off, ctx);
+ break;
+ case BPF_LDX | BPF_B | BPF_MSH:
+ /* X <- 4 * (P[k:1] & 0xf) */
+ ctx->flags |= SEEN_X | SEEN_CALL | SEEN_SKB;
+ /* Load offset to a1 */
+ emit_load_func(r_s0, (ptr)sk_load_byte, ctx);
+ /*
+ * This may emit two instructions so it may not fit
+ * in the delay slot. So use a0 in the delay slot.
+ */
+ emit_load_imm(MIPS_R_A1, k, ctx);
+ emit_jalr(MIPS_R_RA, r_s0, ctx);
+ emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */
+ /* Check the error value */
+ emit_bcond(MIPS_COND_NE, r_ret, 0,
+ b_imm(prog->len, ctx), ctx);
+ emit_reg_move(r_ret, r_zero, ctx);
+ /* We are good */
+ /* X <- P[1:K] & 0xf */
+ emit_andi(r_X, r_A, 0xf, ctx);
+ /* X << 2 */
+ emit_b(b_imm(i + 1, ctx), ctx);
+ emit_sll(r_X, r_X, 2, ctx); /* delay slot */
+ break;
+ case BPF_ST:
+ /* M[k] <- A */
+ ctx->flags |= SEEN_MEM | SEEN_A;
+ emit_store(r_A, r_M, SCRATCH_OFF(k), ctx);
+ break;
+ case BPF_STX:
+ /* M[k] <- X */
+ ctx->flags |= SEEN_MEM | SEEN_X;
+ emit_store(r_X, r_M, SCRATCH_OFF(k), ctx);
+ break;
+ case BPF_ALU | BPF_ADD | BPF_K:
+ /* A += K */
+ ctx->flags |= SEEN_A;
+ emit_addiu(r_A, r_A, k, ctx);
+ break;
+ case BPF_ALU | BPF_ADD | BPF_X:
+ /* A += X */
+ ctx->flags |= SEEN_A | SEEN_X;
+ emit_addu(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_SUB | BPF_K:
+ /* A -= K */
+ ctx->flags |= SEEN_A;
+ emit_addiu(r_A, r_A, -k, ctx);
+ break;
+ case BPF_ALU | BPF_SUB | BPF_X:
+ /* A -= X */
+ ctx->flags |= SEEN_A | SEEN_X;
+ emit_subu(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_MUL | BPF_K:
+ /* A *= K */
+ /* Load K to scratch register before MUL */
+ ctx->flags |= SEEN_A;
+ emit_load_imm(r_s0, k, ctx);
+ emit_mul(r_A, r_A, r_s0, ctx);
+ break;
+ case BPF_ALU | BPF_MUL | BPF_X:
+ /* A *= X */
+ ctx->flags |= SEEN_A | SEEN_X;
+ emit_mul(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_DIV | BPF_K:
+ /* A /= k */
+ if (k == 1)
+ break;
+ if (optimize_div(&k)) {
+ ctx->flags |= SEEN_A;
+ emit_srl(r_A, r_A, k, ctx);
+ break;
+ }
+ ctx->flags |= SEEN_A;
+ emit_load_imm(r_s0, k, ctx);
+ emit_div(r_A, r_s0, ctx);
+ break;
+ case BPF_ALU | BPF_MOD | BPF_K:
+ /* A %= k */
+ if (k == 1) {
+ ctx->flags |= SEEN_A;
+ emit_jit_reg_move(r_A, r_zero, ctx);
+ } else {
+ ctx->flags |= SEEN_A;
+ emit_load_imm(r_s0, k, ctx);
+ emit_mod(r_A, r_s0, ctx);
+ }
+ break;
+ case BPF_ALU | BPF_DIV | BPF_X:
+ /* A /= X */
+ ctx->flags |= SEEN_X | SEEN_A;
+ /* Check if r_X is zero */
+ emit_bcond(MIPS_COND_EQ, r_X, r_zero,
+ b_imm(prog->len, ctx), ctx);
+ emit_load_imm(r_ret, 0, ctx); /* delay slot */
+ emit_div(r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_MOD | BPF_X:
+ /* A %= X */
+ ctx->flags |= SEEN_X | SEEN_A;
+ /* Check if r_X is zero */
+ emit_bcond(MIPS_COND_EQ, r_X, r_zero,
+ b_imm(prog->len, ctx), ctx);
+ emit_load_imm(r_ret, 0, ctx); /* delay slot */
+ emit_mod(r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_OR | BPF_K:
+ /* A |= K */
+ ctx->flags |= SEEN_A;
+ emit_ori(r_A, r_A, k, ctx);
+ break;
+ case BPF_ALU | BPF_OR | BPF_X:
+ /* A |= X */
+ ctx->flags |= SEEN_A;
+ emit_ori(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_XOR | BPF_K:
+ /* A ^= k */
+ ctx->flags |= SEEN_A;
+ emit_xori(r_A, r_A, k, ctx);
+ break;
+ case BPF_ANC | SKF_AD_ALU_XOR_X:
+ case BPF_ALU | BPF_XOR | BPF_X:
+ /* A ^= X */
+ ctx->flags |= SEEN_A;
+ emit_xor(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_AND | BPF_K:
+ /* A &= K */
+ ctx->flags |= SEEN_A;
+ emit_andi(r_A, r_A, k, ctx);
+ break;
+ case BPF_ALU | BPF_AND | BPF_X:
+ /* A &= X */
+ ctx->flags |= SEEN_A | SEEN_X;
+ emit_and(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_LSH | BPF_K:
+ /* A <<= K */
+ ctx->flags |= SEEN_A;
+ emit_sll(r_A, r_A, k, ctx);
+ break;
+ case BPF_ALU | BPF_LSH | BPF_X:
+ /* A <<= X */
+ ctx->flags |= SEEN_A | SEEN_X;
+ emit_sllv(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_RSH | BPF_K:
+ /* A >>= K */
+ ctx->flags |= SEEN_A;
+ emit_srl(r_A, r_A, k, ctx);
+ break;
+ case BPF_ALU | BPF_RSH | BPF_X:
+ ctx->flags |= SEEN_A | SEEN_X;
+ emit_srlv(r_A, r_A, r_X, ctx);
+ break;
+ case BPF_ALU | BPF_NEG:
+ /* A = -A */
+ ctx->flags |= SEEN_A;
+ emit_neg(r_A, ctx);
+ break;
+ case BPF_JMP | BPF_JA:
+ /* pc += K */
+ emit_b(b_imm(i + k + 1, ctx), ctx);
+ emit_nop(ctx);
+ break;
+ case BPF_JMP | BPF_JEQ | BPF_K:
+ /* pc += ( A == K ) ? pc->jt : pc->jf */
+ condt = MIPS_COND_EQ | MIPS_COND_K;
+ goto jmp_cmp;
+ case BPF_JMP | BPF_JEQ | BPF_X:
+ ctx->flags |= SEEN_X;
+ /* pc += ( A == X ) ? pc->jt : pc->jf */
+ condt = MIPS_COND_EQ | MIPS_COND_X;
+ goto jmp_cmp;
+ case BPF_JMP | BPF_JGE | BPF_K:
+ /* pc += ( A >= K ) ? pc->jt : pc->jf */
+ condt = MIPS_COND_GE | MIPS_COND_K;
+ goto jmp_cmp;
+ case BPF_JMP | BPF_JGE | BPF_X:
+ ctx->flags |= SEEN_X;
+ /* pc += ( A >= X ) ? pc->jt : pc->jf */
+ condt = MIPS_COND_GE | MIPS_COND_X;
+ goto jmp_cmp;
+ case BPF_JMP | BPF_JGT | BPF_K:
+ /* pc += ( A > K ) ? pc->jt : pc->jf */
+ condt = MIPS_COND_GT | MIPS_COND_K;
+ goto jmp_cmp;
+ case BPF_JMP | BPF_JGT | BPF_X:
+ ctx->flags |= SEEN_X;
+ /* pc += ( A > X ) ? pc->jt : pc->jf */
+ condt = MIPS_COND_GT | MIPS_COND_X;
+jmp_cmp:
+ /* Greater or Equal */
+ if ((condt & MIPS_COND_GE) ||
+ (condt & MIPS_COND_GT)) {
+ if (condt & MIPS_COND_K) { /* K */
+ ctx->flags |= SEEN_A;
+ emit_sltiu(r_s0, r_A, k, ctx);
+ } else { /* X */
+ ctx->flags |= SEEN_A |
+ SEEN_X;
+ emit_sltu(r_s0, r_A, r_X, ctx);
+ }
+ /* A < (K|X) ? r_scrach = 1 */
+ b_off = b_imm(i + inst->jf + 1, ctx);
+ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off,
+ ctx);
+ emit_nop(ctx);
+ /* A > (K|X) ? scratch = 0 */
+ if (condt & MIPS_COND_GT) {
+ /* Checking for equality */
+ ctx->flags |= SEEN_A | SEEN_X;
+ if (condt & MIPS_COND_K)
+ emit_load_imm(r_s0, k, ctx);
+ else
+ emit_jit_reg_move(r_s0, r_X,
+ ctx);
+ b_off = b_imm(i + inst->jf + 1, ctx);
+ emit_bcond(MIPS_COND_EQ, r_A, r_s0,
+ b_off, ctx);
+ emit_nop(ctx);
+ /* Finally, A > K|X */
+ b_off = b_imm(i + inst->jt + 1, ctx);
+ emit_b(b_off, ctx);
+ emit_nop(ctx);
+ } else {
+ /* A >= (K|X) so jump */
+ b_off = b_imm(i + inst->jt + 1, ctx);
+ emit_b(b_off, ctx);
+ emit_nop(ctx);
+ }
+ } else {
+ /* A == K|X */
+ if (condt & MIPS_COND_K) { /* K */
+ ctx->flags |= SEEN_A;
+ emit_load_imm(r_s0, k, ctx);
+ /* jump true */
+ b_off = b_imm(i + inst->jt + 1, ctx);
+ emit_bcond(MIPS_COND_EQ, r_A, r_s0,
+ b_off, ctx);
+ emit_nop(ctx);
+ /* jump false */
+ b_off = b_imm(i + inst->jf + 1,
+ ctx);
+ emit_bcond(MIPS_COND_NE, r_A, r_s0,
+ b_off, ctx);
+ emit_nop(ctx);
+ } else { /* X */
+ /* jump true */
+ ctx->flags |= SEEN_A | SEEN_X;
+ b_off = b_imm(i + inst->jt + 1,
+ ctx);
+ emit_bcond(MIPS_COND_EQ, r_A, r_X,
+ b_off, ctx);
+ emit_nop(ctx);
+ /* jump false */
+ b_off = b_imm(i + inst->jf + 1, ctx);
+ emit_bcond(MIPS_COND_NE, r_A, r_X,
+ b_off, ctx);
+ emit_nop(ctx);
+ }
+ }
+ break;
+ case BPF_JMP | BPF_JSET | BPF_K:
+ ctx->flags |= SEEN_A;
+ /* pc += (A & K) ? pc -> jt : pc -> jf */
+ emit_load_imm(r_s1, k, ctx);
+ emit_and(r_s0, r_A, r_s1, ctx);
+ /* jump true */
+ b_off = b_imm(i + inst->jt + 1, ctx);
+ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
+ emit_nop(ctx);
+ /* jump false */
+ b_off = b_imm(i + inst->jf + 1, ctx);
+ emit_b(b_off, ctx);
+ emit_nop(ctx);
+ break;
+ case BPF_JMP | BPF_JSET | BPF_X:
+ ctx->flags |= SEEN_X | SEEN_A;
+ /* pc += (A & X) ? pc -> jt : pc -> jf */
+ emit_and(r_s0, r_A, r_X, ctx);
+ /* jump true */
+ b_off = b_imm(i + inst->jt + 1, ctx);
+ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
+ emit_nop(ctx);
+ /* jump false */
+ b_off = b_imm(i + inst->jf + 1, ctx);
+ emit_b(b_off, ctx);
+ emit_nop(ctx);
+ break;
+ case BPF_RET | BPF_A:
+ ctx->flags |= SEEN_A;
+ if (i != prog->len - 1)
+ /*
+ * If this is not the last instruction
+ * then jump to the epilogue
+ */
+ emit_b(b_imm(prog->len, ctx), ctx);
+ emit_reg_move(r_ret, r_A, ctx); /* delay slot */
+ break;
+ case BPF_RET | BPF_K:
+ /*
+ * It can emit two instructions so it does not fit on
+ * the delay slot.
+ */
+ emit_load_imm(r_ret, k, ctx);
+ if (i != prog->len - 1) {
+ /*
+ * If this is not the last instruction
+ * then jump to the epilogue
+ */
+ emit_b(b_imm(prog->len, ctx), ctx);
+ emit_nop(ctx);
+ }
+ break;
+ case BPF_MISC | BPF_TAX:
+ /* X = A */
+ ctx->flags |= SEEN_X | SEEN_A;
+ emit_jit_reg_move(r_X, r_A, ctx);
+ break;
+ case BPF_MISC | BPF_TXA:
+ /* A = X */
+ ctx->flags |= SEEN_A | SEEN_X;
+ emit_jit_reg_move(r_A, r_X, ctx);
+ break;
+ /* AUX */
+ case BPF_ANC | SKF_AD_PROTOCOL:
+ /* A = ntohs(skb->protocol */
+ ctx->flags |= SEEN_SKB | SEEN_OFF | SEEN_A;
+ BUILD_BUG_ON(sizeof_field(struct sk_buff,
+ protocol) != 2);
+ off = offsetof(struct sk_buff, protocol);
+ emit_half_load(r_A, r_skb, off, ctx);
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ /* This needs little endian fixup */
+ if (cpu_has_wsbh) {
+ /* R2 and later have the wsbh instruction */
+ emit_wsbh(r_A, r_A, ctx);
+ } else {
+ /* Get first byte */
+ emit_andi(r_tmp_imm, r_A, 0xff, ctx);
+ /* Shift it */
+ emit_sll(r_tmp, r_tmp_imm, 8, ctx);
+ /* Get second byte */
+ emit_srl(r_tmp_imm, r_A, 8, ctx);
+ emit_andi(r_tmp_imm, r_tmp_imm, 0xff, ctx);
+ /* Put everyting together in r_A */
+ emit_or(r_A, r_tmp, r_tmp_imm, ctx);
+ }
+#endif
+ break;
+ case BPF_ANC | SKF_AD_CPU:
+ ctx->flags |= SEEN_A | SEEN_OFF;
+ /* A = current_thread_info()->cpu */
+ BUILD_BUG_ON(sizeof_field(struct thread_info,
+ cpu) != 4);
+ off = offsetof(struct thread_info, cpu);
+ /* $28/gp points to the thread_info struct */
+ emit_load(r_A, 28, off, ctx);
+ break;
+ case BPF_ANC | SKF_AD_IFINDEX:
+ /* A = skb->dev->ifindex */
+ case BPF_ANC | SKF_AD_HATYPE:
+ /* A = skb->dev->type */
+ ctx->flags |= SEEN_SKB | SEEN_A;
+ off = offsetof(struct sk_buff, dev);
+ /* Load *dev pointer */
+ emit_load_ptr(r_s0, r_skb, off, ctx);
+ /* error (0) in the delay slot */
+ emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
+ b_imm(prog->len, ctx), ctx);
+ emit_reg_move(r_ret, r_zero, ctx);
+ if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
+ BUILD_BUG_ON(sizeof_field(struct net_device, ifindex) != 4);
+ off = offsetof(struct net_device, ifindex);
+ emit_load(r_A, r_s0, off, ctx);
+ } else { /* (code == (BPF_ANC | SKF_AD_HATYPE) */
+ BUILD_BUG_ON(sizeof_field(struct net_device, type) != 2);
+ off = offsetof(struct net_device, type);
+ emit_half_load_unsigned(r_A, r_s0, off, ctx);
+ }
+ break;
+ case BPF_ANC | SKF_AD_MARK:
+ ctx->flags |= SEEN_SKB | SEEN_A;
+ BUILD_BUG_ON(sizeof_field(struct sk_buff, mark) != 4);
+ off = offsetof(struct sk_buff, mark);
+ emit_load(r_A, r_skb, off, ctx);
+ break;
+ case BPF_ANC | SKF_AD_RXHASH:
+ ctx->flags |= SEEN_SKB | SEEN_A;
+ BUILD_BUG_ON(sizeof_field(struct sk_buff, hash) != 4);
+ off = offsetof(struct sk_buff, hash);
+ emit_load(r_A, r_skb, off, ctx);
+ break;
+ case BPF_ANC | SKF_AD_VLAN_TAG:
+ ctx->flags |= SEEN_SKB | SEEN_A;
+ BUILD_BUG_ON(sizeof_field(struct sk_buff,
+ vlan_tci) != 2);
+ off = offsetof(struct sk_buff, vlan_tci);
+ emit_half_load_unsigned(r_A, r_skb, off, ctx);
+ break;
+ case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
+ ctx->flags |= SEEN_SKB | SEEN_A;
+ emit_load_byte(r_A, r_skb, PKT_VLAN_PRESENT_OFFSET(), ctx);
+ if (PKT_VLAN_PRESENT_BIT)
+ emit_srl(r_A, r_A, PKT_VLAN_PRESENT_BIT, ctx);
+ if (PKT_VLAN_PRESENT_BIT < 7)
+ emit_andi(r_A, r_A, 1, ctx);
+ break;
+ case BPF_ANC | SKF_AD_PKTTYPE:
+ ctx->flags |= SEEN_SKB;
+
+ emit_load_byte(r_tmp, r_skb, PKT_TYPE_OFFSET(), ctx);
+ /* Keep only the last 3 bits */
+ emit_andi(r_A, r_tmp, PKT_TYPE_MAX, ctx);
+#ifdef __BIG_ENDIAN_BITFIELD
+ /* Get the actual packet type to the lower 3 bits */
+ emit_srl(r_A, r_A, 5, ctx);
+#endif
+ break;
+ case BPF_ANC | SKF_AD_QUEUE:
+ ctx->flags |= SEEN_SKB | SEEN_A;
+ BUILD_BUG_ON(sizeof_field(struct sk_buff,
+ queue_mapping) != 2);
+ BUILD_BUG_ON(offsetof(struct sk_buff,
+ queue_mapping) > 0xff);
+ off = offsetof(struct sk_buff, queue_mapping);
+ emit_half_load_unsigned(r_A, r_skb, off, ctx);
+ break;
+ default:
+ pr_debug("%s: Unhandled opcode: 0x%02x\n", __FILE__,
+ inst->code);
+ return -1;
+ }
+ }
+
+ /* compute offsets only during the first pass */
+ if (ctx->target == NULL)
+ ctx->offsets[i] = ctx->idx * 4;
+
+ return 0;
+}
+
+void bpf_jit_compile(struct bpf_prog *fp)
+{
+ struct jit_ctx ctx;
+ unsigned int alloc_size, tmp_idx;
+
+ if (!bpf_jit_enable)
+ return;
+
+ memset(&ctx, 0, sizeof(ctx));
+
+ ctx.offsets = kcalloc(fp->len + 1, sizeof(*ctx.offsets), GFP_KERNEL);
+ if (ctx.offsets == NULL)
+ return;
+
+ ctx.skf = fp;
+
+ if (build_body(&ctx))
+ goto out;
+
+ tmp_idx = ctx.idx;
+ build_prologue(&ctx);
+ ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
+ /* just to complete the ctx.idx count */
+ build_epilogue(&ctx);
+
+ alloc_size = 4 * ctx.idx;
+ ctx.target = module_alloc(alloc_size);
+ if (ctx.target == NULL)
+ goto out;
+
+ /* Clean it */
+ memset(ctx.target, 0, alloc_size);
+
+ ctx.idx = 0;
+
+ /* Generate the actual JIT code */
+ build_prologue(&ctx);
+ build_body(&ctx);
+ build_epilogue(&ctx);
+
+ /* Update the icache */
+ flush_icache_range((ptr)ctx.target, (ptr)(ctx.target + ctx.idx));
+
+ if (bpf_jit_enable > 1)
+ /* Dump JIT code */
+ bpf_jit_dump(fp->len, alloc_size, 2, ctx.target);
+
+ fp->bpf_func = (void *)ctx.target;
+ fp->jited = 1;
+
+out:
+ kfree(ctx.offsets);
+}
+
+void bpf_jit_free(struct bpf_prog *fp)
+{
+ if (fp->jited)
+ module_memfree(fp->bpf_func);
+
+ bpf_prog_unlock_free(fp);
+}
diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S
new file mode 100644
index 000000000000..57154c5883b6
--- /dev/null
+++ b/arch/mips/net/bpf_jit_asm.S
@@ -0,0 +1,285 @@
+/*
+ * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF
+ * compiler.
+ *
+ * Copyright (C) 2015 Imagination Technologies Ltd.
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#include <asm/asm.h>
+#include <asm/isa-rev.h>
+#include <asm/regdef.h>
+#include "bpf_jit.h"
+
+/* ABI
+ *
+ * r_skb_hl skb header length
+ * r_skb_data skb data
+ * r_off(a1) offset register
+ * r_A BPF register A
+ * r_X PF register X
+ * r_skb(a0) *skb
+ * r_M *scratch memory
+ * r_skb_le skb length
+ * r_s0 Scratch register 0
+ * r_s1 Scratch register 1
+ *
+ * On entry:
+ * a0: *skb
+ * a1: offset (imm or imm + X)
+ *
+ * All non-BPF-ABI registers are free for use. On return, we only
+ * care about r_ret. The BPF-ABI registers are assumed to remain
+ * unmodified during the entire filter operation.
+ */
+
+#define skb a0
+#define offset a1
+#define SKF_LL_OFF (-0x200000) /* Can't include linux/filter.h in assembly */
+
+ /* We know better :) so prevent assembler reordering etc */
+ .set noreorder
+
+#define is_offset_negative(TYPE) \
+ /* If offset is negative we have more work to do */ \
+ slti t0, offset, 0; \
+ bgtz t0, bpf_slow_path_##TYPE##_neg; \
+ /* Be careful what follows in DS. */
+
+#define is_offset_in_header(SIZE, TYPE) \
+ /* Reading from header? */ \
+ addiu $r_s0, $r_skb_hl, -SIZE; \
+ slt t0, $r_s0, offset; \
+ bgtz t0, bpf_slow_path_##TYPE; \
+
+LEAF(sk_load_word)
+ is_offset_negative(word)
+FEXPORT(sk_load_word_positive)
+ is_offset_in_header(4, word)
+ /* Offset within header boundaries */
+ PTR_ADDU t1, $r_skb_data, offset
+ .set reorder
+ lw $r_A, 0(t1)
+ .set noreorder
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+ wsbh t0, $r_A
+ rotr $r_A, t0, 16
+# else
+ sll t0, $r_A, 24
+ srl t1, $r_A, 24
+ srl t2, $r_A, 8
+ or t0, t0, t1
+ andi t2, t2, 0xff00
+ andi t1, $r_A, 0xff00
+ or t0, t0, t2
+ sll t1, t1, 8
+ or $r_A, t0, t1
+# endif
+#endif
+ jr $r_ra
+ move $r_ret, zero
+ END(sk_load_word)
+
+LEAF(sk_load_half)
+ is_offset_negative(half)
+FEXPORT(sk_load_half_positive)
+ is_offset_in_header(2, half)
+ /* Offset within header boundaries */
+ PTR_ADDU t1, $r_skb_data, offset
+ lhu $r_A, 0(t1)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+ wsbh $r_A, $r_A
+# else
+ sll t0, $r_A, 8
+ srl t1, $r_A, 8
+ andi t0, t0, 0xff00
+ or $r_A, t0, t1
+# endif
+#endif
+ jr $r_ra
+ move $r_ret, zero
+ END(sk_load_half)
+
+LEAF(sk_load_byte)
+ is_offset_negative(byte)
+FEXPORT(sk_load_byte_positive)
+ is_offset_in_header(1, byte)
+ /* Offset within header boundaries */
+ PTR_ADDU t1, $r_skb_data, offset
+ lbu $r_A, 0(t1)
+ jr $r_ra
+ move $r_ret, zero
+ END(sk_load_byte)
+
+/*
+ * call skb_copy_bits:
+ * (prototype in linux/skbuff.h)
+ *
+ * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len)
+ *
+ * o32 mandates we leave 4 spaces for argument registers in case
+ * the callee needs to use them. Even though we don't care about
+ * the argument registers ourselves, we need to allocate that space
+ * to remain ABI compliant since the callee may want to use that space.
+ * We also allocate 2 more spaces for $r_ra and our return register (*to).
+ *
+ * n64 is a bit different. The *caller* will allocate the space to preserve
+ * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no
+ * good reason but it does not matter that much really.
+ *
+ * (void *to) is returned in r_s0
+ *
+ */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define DS_OFFSET(SIZE) (4 * SZREG)
+#else
+#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
+#endif
+#define bpf_slow_path_common(SIZE) \
+ /* Quick check. Are we within reasonable boundaries? */ \
+ LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \
+ sltu $r_s0, offset, $r_s1; \
+ beqz $r_s0, fault; \
+ /* Load 4th argument in DS */ \
+ LONG_ADDIU a3, zero, SIZE; \
+ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
+ PTR_LA t0, skb_copy_bits; \
+ PTR_S $r_ra, (5 * SZREG)($r_sp); \
+ /* Assign low slot to a2 */ \
+ PTR_ADDIU a2, $r_sp, DS_OFFSET(SIZE); \
+ jalr t0; \
+ /* Reset our destination slot (DS but it's ok) */ \
+ INT_S zero, (4 * SZREG)($r_sp); \
+ /* \
+ * skb_copy_bits returns 0 on success and -EFAULT \
+ * on error. Our data live in a2. Do not bother with \
+ * our data if an error has been returned. \
+ */ \
+ /* Restore our frame */ \
+ PTR_L $r_ra, (5 * SZREG)($r_sp); \
+ INT_L $r_s0, (4 * SZREG)($r_sp); \
+ bltz v0, fault; \
+ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
+ move $r_ret, zero; \
+
+NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
+ bpf_slow_path_common(4)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+ wsbh t0, $r_s0
+ jr $r_ra
+ rotr $r_A, t0, 16
+# else
+ sll t0, $r_s0, 24
+ srl t1, $r_s0, 24
+ srl t2, $r_s0, 8
+ or t0, t0, t1
+ andi t2, t2, 0xff00
+ andi t1, $r_s0, 0xff00
+ or t0, t0, t2
+ sll t1, t1, 8
+ jr $r_ra
+ or $r_A, t0, t1
+# endif
+#else
+ jr $r_ra
+ move $r_A, $r_s0
+#endif
+
+ END(bpf_slow_path_word)
+
+NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
+ bpf_slow_path_common(2)
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if MIPS_ISA_REV >= 2
+ jr $r_ra
+ wsbh $r_A, $r_s0
+# else
+ sll t0, $r_s0, 8
+ andi t1, $r_s0, 0xff00
+ andi t0, t0, 0xff00
+ srl t1, t1, 8
+ jr $r_ra
+ or $r_A, t0, t1
+# endif
+#else
+ jr $r_ra
+ move $r_A, $r_s0
+#endif
+
+ END(bpf_slow_path_half)
+
+NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp)
+ bpf_slow_path_common(1)
+ jr $r_ra
+ move $r_A, $r_s0
+
+ END(bpf_slow_path_byte)
+
+/*
+ * Negative entry points
+ */
+ .macro bpf_is_end_of_data
+ li t0, SKF_LL_OFF
+ /* Reading link layer data? */
+ slt t1, offset, t0
+ bgtz t1, fault
+ /* Be careful what follows in DS. */
+ .endm
+/*
+ * call skb_copy_bits:
+ * (prototype in linux/filter.h)
+ *
+ * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
+ * int k, unsigned int size)
+ *
+ * see above (bpf_slow_path_common) for ABI restrictions
+ */
+#define bpf_negative_common(SIZE) \
+ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
+ PTR_LA t0, bpf_internal_load_pointer_neg_helper; \
+ PTR_S $r_ra, (5 * SZREG)($r_sp); \
+ jalr t0; \
+ li a2, SIZE; \
+ PTR_L $r_ra, (5 * SZREG)($r_sp); \
+ /* Check return pointer */ \
+ beqz v0, fault; \
+ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
+ /* Preserve our pointer */ \
+ move $r_s0, v0; \
+ /* Set return value */ \
+ move $r_ret, zero; \
+
+bpf_slow_path_word_neg:
+ bpf_is_end_of_data
+NESTED(sk_load_word_negative, (6 * SZREG), $r_sp)
+ bpf_negative_common(4)
+ jr $r_ra
+ lw $r_A, 0($r_s0)
+ END(sk_load_word_negative)
+
+bpf_slow_path_half_neg:
+ bpf_is_end_of_data
+NESTED(sk_load_half_negative, (6 * SZREG), $r_sp)
+ bpf_negative_common(2)
+ jr $r_ra
+ lhu $r_A, 0($r_s0)
+ END(sk_load_half_negative)
+
+bpf_slow_path_byte_neg:
+ bpf_is_end_of_data
+NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp)
+ bpf_negative_common(1)
+ jr $r_ra
+ lbu $r_A, 0($r_s0)
+ END(sk_load_byte_negative)
+
+fault:
+ jr $r_ra
+ addiu $r_ret, zero, 1
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 8e26b120f994..d85cbf84e41c 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -10,7 +10,7 @@
#include <asm/sn/addrs.h>
#include <asm/sn/types.h>
#include <asm/sn/klconfig.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
#include <asm/sn/ioc3.h>
#include <asm/pci/bridge.h>
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index 5c1a196be0c5..3b2552fb7735 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -437,17 +437,28 @@ static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
struct irq_alloc_info info;
int irq;
- irq = bc->pci_int[slot];
+ switch (pin) {
+ case PCI_INTERRUPT_UNKNOWN:
+ case PCI_INTERRUPT_INTA:
+ case PCI_INTERRUPT_INTC:
+ pin = 0;
+ break;
+ case PCI_INTERRUPT_INTB:
+ case PCI_INTERRUPT_INTD:
+ pin = 1;
+ }
+
+ irq = bc->pci_int[slot][pin];
if (irq == -1) {
info.ctrl = bc;
info.nasid = bc->nasid;
- info.pin = slot;
+ info.pin = bc->int_mapping[slot][pin];
irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info);
if (irq < 0)
return irq;
- bc->pci_int[slot] = irq;
+ bc->pci_int[slot][pin] = irq;
}
return irq;
}
@@ -458,21 +469,26 @@ static void bridge_setup_ip27_baseio6g(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO6G);
bc->ioc3_sid[6] = IOC3_SID(IOC3_SUBSYS_IP27_MIO);
+ bc->int_mapping[2][1] = 4;
+ bc->int_mapping[6][1] = 6;
}
static void bridge_setup_ip27_baseio(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO);
+ bc->int_mapping[2][1] = 4;
}
static void bridge_setup_ip29_baseio(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP29_SYSBOARD);
+ bc->int_mapping[2][1] = 3;
}
static void bridge_setup_ip30_sysboard(struct bridge_controller *bc)
{
bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP30_SYSBOARD);
+ bc->int_mapping[2][1] = 4;
}
static void bridge_setup_menet(struct bridge_controller *bc)
@@ -483,6 +499,26 @@ static void bridge_setup_menet(struct bridge_controller *bc)
bc->ioc3_sid[3] = IOC3_SID(IOC3_SUBSYS_MENET4);
}
+static void bridge_setup_io7(struct bridge_controller *bc)
+{
+ bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO7);
+}
+
+static void bridge_setup_io8(struct bridge_controller *bc)
+{
+ bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO8);
+}
+
+static void bridge_setup_io9(struct bridge_controller *bc)
+{
+ bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_IO9);
+}
+
+static void bridge_setup_ip34_fuel_sysboard(struct bridge_controller *bc)
+{
+ bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IP34_SYSBOARD);
+}
+
#define BRIDGE_BOARD_SETUP(_partno, _setup) \
{ .match = _partno, .setup = _setup }
@@ -500,6 +536,10 @@ static const struct {
BRIDGE_BOARD_SETUP("030-0887-", bridge_setup_ip30_sysboard),
BRIDGE_BOARD_SETUP("030-1467-", bridge_setup_ip30_sysboard),
BRIDGE_BOARD_SETUP("030-0873-", bridge_setup_menet),
+ BRIDGE_BOARD_SETUP("030-1557-", bridge_setup_io7),
+ BRIDGE_BOARD_SETUP("030-1673-", bridge_setup_io8),
+ BRIDGE_BOARD_SETUP("030-1771-", bridge_setup_io9),
+ BRIDGE_BOARD_SETUP("030-1707-", bridge_setup_ip34_fuel_sysboard),
};
static void bridge_setup_board(struct bridge_controller *bc, char *partnum)
@@ -655,7 +695,11 @@ static int bridge_probe(struct platform_device *pdev)
for (slot = 0; slot < 8; slot++) {
bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
- bc->pci_int[slot] = -1;
+ bc->pci_int[slot][0] = -1;
+ bc->pci_int[slot][1] = -1;
+ /* default interrupt pin mapping */
+ bc->int_mapping[slot][0] = slot;
+ bc->int_mapping[slot][1] = slot ^ 4;
}
bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */
diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
index 0ddeb31afa93..bdf53807d7c2 100644
--- a/arch/mips/ralink/ill_acc.c
+++ b/arch/mips/ralink/ill_acc.c
@@ -67,11 +67,13 @@ static int __init ill_acc_of_setup(void)
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
dev_err(&pdev->dev, "failed to get irq\n");
+ put_device(&pdev->dev);
return -EINVAL;
}
if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
dev_err(&pdev->dev, "failed to request irq\n");
+ put_device(&pdev->dev);
return -EINVAL;
}
diff --git a/arch/mips/sgi-ip22/ip22-gio.c b/arch/mips/sgi-ip22/ip22-gio.c
index 282b47c2dc27..de0768a49ee8 100644
--- a/arch/mips/sgi-ip22/ip22-gio.c
+++ b/arch/mips/sgi-ip22/ip22-gio.c
@@ -47,8 +47,9 @@ static struct device gio_bus = {
* Used by a driver to check whether an of_device present in the
* system is in its list of supported devices.
*/
-const struct gio_device_id *gio_match_device(const struct gio_device_id *match,
- const struct gio_device *dev)
+static const struct gio_device_id *
+gio_match_device(const struct gio_device_id *match,
+ const struct gio_device *dev)
{
const struct gio_device_id *ids;
@@ -58,7 +59,6 @@ const struct gio_device_id *gio_match_device(const struct gio_device_id *match,
return NULL;
}
-EXPORT_SYMBOL_GPL(gio_match_device);
struct gio_device *gio_dev_get(struct gio_device *dev)
{
diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c
index 73ad29b180fb..5a38ae6bdfa9 100644
--- a/arch/mips/sgi-ip27/ip27-berr.c
+++ b/arch/mips/sgi-ip27/ip27-berr.c
@@ -16,8 +16,8 @@
#include <asm/ptrace.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
-#include <asm/sn/sn0/hub.h>
#include <asm/tlbdebug.h>
#include <asm/traps.h>
#include <linux/uaccess.h>
@@ -30,29 +30,31 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1)
{ "WERR", "Uncached Partial Write", "PWERR", "Write Timeout",
NULL, NULL, NULL, NULL }
};
- int wrb = errst1 & PI_ERR_ST1_WRBRRB_MASK;
+ union pi_err_stat0 st0;
+ union pi_err_stat1 st1;
- if (!(errst0 & PI_ERR_ST0_VALID_MASK)) {
- printk("Hub does not contain valid error information\n");
+ st0.pi_stat0_word = errst0;
+ st1.pi_stat1_word = errst1;
+
+ if (!st0.pi_stat0_fmt.s0_valid) {
+ pr_info("Hub does not contain valid error information\n");
return;
}
-
- printk("Hub has valid error information:\n");
- if (errst0 & PI_ERR_ST0_OVERRUN_MASK)
- printk("Overrun is set. Error stack may contain additional "
+ pr_info("Hub has valid error information:\n");
+ if (st0.pi_stat0_fmt.s0_ovr_run)
+ pr_info("Overrun is set. Error stack may contain additional "
"information.\n");
- printk("Hub error address is %08lx\n",
- (errst0 & PI_ERR_ST0_ADDR_MASK) >> (PI_ERR_ST0_ADDR_SHFT - 3));
- printk("Incoming message command 0x%lx\n",
- (errst0 & PI_ERR_ST0_CMD_MASK) >> PI_ERR_ST0_CMD_SHFT);
- printk("Supplemental field of incoming message is 0x%lx\n",
- (errst0 & PI_ERR_ST0_SUPPL_MASK) >> PI_ERR_ST0_SUPPL_SHFT);
- printk("T5 Rn (for RRB only) is 0x%lx\n",
- (errst0 & PI_ERR_ST0_REQNUM_MASK) >> PI_ERR_ST0_REQNUM_SHFT);
- printk("Error type is %s\n", err_type[wrb]
- [(errst0 & PI_ERR_ST0_TYPE_MASK) >> PI_ERR_ST0_TYPE_SHFT]
- ? : "invalid");
+ pr_info("Hub error address is %08lx\n",
+ (unsigned long)st0.pi_stat0_fmt.s0_addr);
+ pr_info("Incoming message command 0x%lx\n",
+ (unsigned long)st0.pi_stat0_fmt.s0_cmd);
+ pr_info("Supplemental field of incoming message is 0x%lx\n",
+ (unsigned long)st0.pi_stat0_fmt.s0_supl);
+ pr_info("T5 Rn (for RRB only) is 0x%lx\n",
+ (unsigned long)st0.pi_stat0_fmt.s0_t5_req);
+ pr_info("Error type is %s\n", err_type[st1.pi_stat1_fmt.s1_rw_rb]
+ [st0.pi_stat0_fmt.s0_err_type] ? : "invalid");
}
int ip27_be_handler(struct pt_regs *regs, int is_fixup)
diff --git a/arch/mips/sgi-ip27/ip27-common.h b/arch/mips/sgi-ip27/ip27-common.h
index 3ffbcf9bfd41..ed008a08464c 100644
--- a/arch/mips/sgi-ip27/ip27-common.h
+++ b/arch/mips/sgi-ip27/ip27-common.h
@@ -3,8 +3,18 @@
#ifndef __IP27_COMMON_H
#define __IP27_COMMON_H
-extern void ip27_reboot_setup(void);
+extern nasid_t master_nasid;
+
+extern void cpu_node_probe(void);
extern void hub_rt_clock_event_init(void);
+extern void hub_rtc_init(nasid_t nasid);
+extern void install_cpu_nmi_handler(int slice);
+extern void install_ipi(void);
+extern void ip27_reboot_setup(void);
extern const struct plat_smp_ops ip27_smp_ops;
+extern unsigned long node_getfirstfree(nasid_t nasid);
+extern void per_cpu_init(void);
+extern void replicate_kernel_text(void);
+extern void setup_replication_mask(void);
#endif /* __IP27_COMMON_H */
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 5886bee89d06..7737a88c6569 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -9,14 +9,15 @@
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
+#include <asm/sn/agent.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
+#include "ip27-common.h"
+
#define IOC3_CLK (22000000 / 3)
#define IOC3_FLAGS (0)
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index a538d0ceb61d..8352eb6403b4 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -11,7 +11,9 @@
#include <linux/mmzone.h>
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/io.h>
+#include <asm/xtalk/xtalk.h>
static int force_fire_and_forget = 1;
@@ -82,7 +84,7 @@ unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
*/
static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
{
- iprb_t prb;
+ union iprb_u prb;
int prb_offset;
/*
@@ -135,7 +137,7 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
static void hub_set_piomode(nasid_t nasid)
{
u64 ii_iowa;
- hubii_wcr_t ii_wcr;
+ union hubii_wcr_u ii_wcr;
unsigned i;
ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index f597e1ee2df7..32bcb8d1dd88 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -19,23 +19,18 @@
#include <asm/pgtable.h>
#include <asm/sgialib.h>
#include <asm/time.h>
+#include <asm/sn/agent.h>
#include <asm/sn/types.h>
-#include <asm/sn/sn0/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/sn0/hubio.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/ioc3.h>
#include <asm/mipsregs.h>
#include <asm/sn/gda.h>
-#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
#include <asm/current.h>
#include <asm/processor.h>
#include <asm/mmu_context.h>
#include <asm/thread_info.h>
#include <asm/sn/launch.h>
-#include <asm/sn/sn_private.h>
-#include <asm/sn/sn0/ip27.h>
#include <asm/sn/mapped_kernel.h>
#include "ip27-common.h"
@@ -77,18 +72,14 @@ static void per_hub_init(nasid_t nasid)
void per_cpu_init(void)
{
int cpu = smp_processor_id();
- int slice = LOCAL_HUB_L(PI_CPU_NUM);
nasid_t nasid = get_nasid();
- struct hub_data *hub = hub_data(nasid);
-
- if (test_and_set_bit(slice, &hub->slice_map))
- return;
clear_c0_status(ST0_IM);
per_hub_init(nasid);
- cpu_time_init();
+ pr_info("CPU %d clock is %dMHz.\n", cpu, sn_cpu_info[cpu].p_speed);
+
install_ipi();
/* Install our NMI handler if symmon hasn't installed one. */
@@ -98,16 +89,6 @@ void per_cpu_init(void)
enable_percpu_irq(IP27_HUB_PEND1_IRQ, IRQ_TYPE_NONE);
}
-/*
- * get_nasid() returns the physical node id number of the caller.
- */
-nasid_t
-get_nasid(void)
-{
- return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK)
- >> NSRI_NODEID_SHFT);
-}
-
void __init plat_mem_setup(void)
{
u64 p, e, n_mode;
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index c72ae330ea93..42df9fafa943 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -19,7 +19,6 @@
#include <asm/sn/addrs.h>
#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
#include <asm/sn/irq_alloc.h>
@@ -288,11 +287,9 @@ void __init arch_init_irq(void)
* Mark these as reserved right away so they won't be used accidentally
* later.
*/
- for (i = 0; i <= BASE_PCI_IRQ; i++)
+ for (i = 0; i <= CPU_CALL_B_IRQ; i++)
set_bit(i, hub_irq_map);
- set_bit(IP_PEND0_6_63, hub_irq_map);
-
for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
set_bit(i, hub_irq_map);
diff --git a/arch/mips/sgi-ip27/ip27-klconfig.c b/arch/mips/sgi-ip27/ip27-klconfig.c
index 6cb2160e7689..81a1646e609a 100644
--- a/arch/mips/sgi-ip27/ip27-klconfig.c
+++ b/arch/mips/sgi-ip27/ip27-klconfig.c
@@ -72,54 +72,3 @@ lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_type)
/* Didn't find it. */
return (lboard_t *)NULL;
}
-
-klcpu_t *nasid_slice_to_cpuinfo(nasid_t nasid, int slice)
-{
- lboard_t *brd;
- klcpu_t *acpu;
-
- if (!(brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_IP27)))
- return (klcpu_t *)NULL;
-
- if (!(acpu = (klcpu_t *)find_first_component(brd, KLSTRUCT_CPU)))
- return (klcpu_t *)NULL;
-
- do {
- if ((acpu->cpu_info.physid) == slice)
- return acpu;
- } while ((acpu = (klcpu_t *)find_component(brd, (klinfo_t *)acpu,
- KLSTRUCT_CPU)));
- return (klcpu_t *)NULL;
-}
-
-klcpu_t *sn_get_cpuinfo(cpuid_t cpu)
-{
- nasid_t nasid;
- int slice;
- klcpu_t *acpu;
-
- if (!(cpu < MAXCPUS)) {
- printk("sn_get_cpuinfo: illegal cpuid 0x%lx\n", cpu);
- return NULL;
- }
-
- nasid = cputonasid(cpu);
- if (nasid == INVALID_NASID)
- return NULL;
-
- for (slice = 0; slice < CPUS_PER_NODE; slice++) {
- acpu = nasid_slice_to_cpuinfo(nasid, slice);
- if (acpu && acpu->cpu_info.virtid == cpu)
- return acpu;
- }
- return NULL;
-}
-
-int get_cpu_slice(cpuid_t cpu)
-{
- klcpu_t *acpu;
-
- if ((acpu = sn_get_cpuinfo(cpu)) == NULL)
- return -1;
- return acpu->cpu_info.physid;
-}
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index ee1c6ff4aa00..abd7a84df7dd 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -16,11 +16,11 @@
#include <asm/sn/types.h>
#include <asm/sn/arch.h>
#include <asm/sn/gda.h>
-#include <asm/sn/hub.h>
#include <asm/sn/mapped_kernel.h>
-#include <asm/sn/sn_private.h>
-static cpumask_t ktext_repmask;
+#include "ip27-common.h"
+
+static nodemask_t ktext_repmask;
/*
* XXX - This needs to be much smarter about where it puts copies of the
@@ -30,8 +30,8 @@ static cpumask_t ktext_repmask;
void __init setup_replication_mask(void)
{
/* Set only the master cnode's bit. The master cnode is always 0. */
- cpumask_clear(&ktext_repmask);
- cpumask_set_cpu(0, &ktext_repmask);
+ nodes_clear(ktext_repmask);
+ node_set(0, ktext_repmask);
#ifdef CONFIG_REPLICATE_KTEXT
#ifndef CONFIG_MAPPED_KERNEL
@@ -44,7 +44,7 @@ void __init setup_replication_mask(void)
if (nasid == 0)
continue;
/* Advertise that we have a copy of the kernel */
- cpumask_set_cpu(nasid, &ktext_repmask);
+ node_set(nasid, ktext_repmask);
}
}
#endif
@@ -98,7 +98,7 @@ void __init replicate_kernel_text(void)
continue;
/* Check if this node should get a copy of the kernel */
- if (cpumask_test_cpu(client_nasid, &ktext_repmask)) {
+ if (node_isset(client_nasid, ktext_repmask)) {
server_nasid = client_nasid;
copy_kernel(server_nasid);
}
@@ -122,7 +122,7 @@ unsigned long node_getfirstfree(nasid_t nasid)
loadbase += 16777216;
#endif
offset = PAGE_ALIGN((unsigned long)(&_end)) - loadbase;
- if ((nasid == 0) || (cpumask_test_cpu(nasid, &ktext_repmask)))
+ if ((nasid == 0) || (node_isset(nasid, ktext_repmask)))
return TO_NODE(nasid, offset) >> PAGE_SHIFT;
else
return KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >> PAGE_SHIFT;
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 563aad5e6398..a45691e6ab90 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -25,10 +25,10 @@
#include <asm/sections.h>
#include <asm/sn/arch.h>
-#include <asm/sn/hub.h>
+#include <asm/sn/agent.h>
#include <asm/sn/klconfig.h>
-#include <asm/sn/sn_private.h>
+#include "ip27-common.h"
#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT)
#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT)
@@ -37,31 +37,18 @@ struct node_data *__node_data[MAX_NUMNODES];
EXPORT_SYMBOL(__node_data);
-static int fine_mode;
-
-static int is_fine_dirmode(void)
-{
- return ((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE;
-}
-
-static u64 get_region(nasid_t nasid)
-{
- if (fine_mode)
- return nasid >> NASID_TO_FINEREG_SHFT;
- else
- return nasid >> NASID_TO_COARSEREG_SHFT;
-}
-
-static u64 region_mask;
-
-static void gen_region_mask(u64 *region_mask)
+static u64 gen_region_mask(void)
{
+ int region_shift;
+ u64 region_mask;
nasid_t nasid;
- (*region_mask) = 0;
- for_each_online_node(nasid) {
- (*region_mask) |= 1ULL << get_region(nasid);
- }
+ region_shift = get_region_shift();
+ region_mask = 0;
+ for_each_online_node(nasid)
+ region_mask |= BIT_ULL(nasid >> region_shift);
+
+ return region_mask;
}
#define rou_rflag rou_flags
@@ -148,25 +135,25 @@ static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b)
} while ((brd = find_lboard_class(KLCF_NEXT(brd), KLTYPE_ROUTER)));
}
+ if (nasid_a == nasid_b)
+ return LOCAL_DISTANCE;
+
+ if (router_a == router_b)
+ return LOCAL_DISTANCE + 1;
+
if (router_a == NULL) {
pr_info("node_distance: router_a NULL\n");
- return -1;
+ return 255;
}
if (router_b == NULL) {
pr_info("node_distance: router_b NULL\n");
- return -1;
+ return 255;
}
- if (nasid_a == nasid_b)
- return 0;
-
- if (router_a == router_b)
- return 1;
-
router_distance = 100;
router_recurse(router_a, router_b, 2);
- return router_distance;
+ return LOCAL_DISTANCE + router_distance;
}
static void __init init_topology_matrix(void)
@@ -281,10 +268,10 @@ static unsigned long __init slot_psize_compute(nasid_t nasid, int slot)
static void __init mlreset(void)
{
+ u64 region_mask;
nasid_t nasid;
master_nasid = get_nasid();
- fine_mode = is_fine_dirmode();
/*
* Probe for all CPUs - this creates the cpumask and sets up the
@@ -297,7 +284,7 @@ static void __init mlreset(void)
init_topology_matrix();
dump_topology();
- gen_region_mask(&region_mask);
+ region_mask = gen_region_mask();
setup_replication_mask();
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index daf3670d94e7..84889b57d5ff 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -9,7 +9,7 @@
#include <asm/sn/addrs.h>
#include <asm/sn/nmi.h>
#include <asm/sn/arch.h>
-#include <asm/sn/sn0/hub.h>
+#include <asm/sn/agent.h>
#if 0
#define NODE_NUM_CPUS(n) CNODE_NUM_CPUS(n)
@@ -17,6 +17,9 @@
#define NODE_NUM_CPUS(n) CPUS_PER_NODE
#endif
+#define SEND_NMI(_nasid, _slice) \
+ REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
+
typedef unsigned long machreg_t;
static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c
index 74d078247e49..5ac5ad638734 100644
--- a/arch/mips/sgi-ip27/ip27-reset.c
+++ b/arch/mips/sgi-ip27/ip27-reset.c
@@ -22,9 +22,9 @@
#include <asm/reboot.h>
#include <asm/sgialib.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
#include <asm/sn/gda.h>
-#include <asm/sn/sn0/hub.h>
#include "ip27-common.h"
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index faa0244c8b0c..5d2652a1d35a 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -15,36 +15,22 @@
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
+#include <asm/sn/agent.h>
#include <asm/sn/arch.h>
#include <asm/sn/gda.h>
#include <asm/sn/intr.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/launch.h>
#include <asm/sn/mapped_kernel.h>
-#include <asm/sn/sn_private.h>
#include <asm/sn/types.h>
-#include <asm/sn/sn0/hubpi.h>
-#include <asm/sn/sn0/hubio.h>
-#include <asm/sn/sn0/ip27.h>
#include "ip27-common.h"
-/*
- * Takes as first input the PROM assigned cpu id, and the kernel
- * assigned cpu id as the second.
- */
-static void alloc_cpupda(nasid_t nasid, cpuid_t cpu, int cpunum)
-{
- cputonasid(cpunum) = nasid;
- cputoslice(cpunum) = get_cpu_slice(cpu);
-}
-
-static int do_cpumask(nasid_t nasid, int highest)
+static int node_scan_cpus(nasid_t nasid, int highest)
{
- static int tot_cpus_found = 0;
+ static int cpus_found;
lboard_t *brd;
klcpu_t *acpu;
- int cpus_found = 0;
cpuid_t cpuid;
brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_IP27);
@@ -55,13 +41,15 @@ static int do_cpumask(nasid_t nasid, int highest)
cpuid = acpu->cpu_info.virtid;
/* Only let it join in if it's marked enabled */
if ((acpu->cpu_info.flags & KLINFO_ENABLE) &&
- (tot_cpus_found != NR_CPUS)) {
+ (cpus_found != NR_CPUS)) {
if (cpuid > highest)
highest = cpuid;
set_cpu_possible(cpuid, true);
- alloc_cpupda(nasid, cpuid, tot_cpus_found);
+ cputonasid(cpus_found) = nasid;
+ cputoslice(cpus_found) = acpu->cpu_info.physid;
+ sn_cpu_info[cpus_found].p_speed =
+ acpu->cpu_speed;
cpus_found++;
- tot_cpus_found++;
}
acpu = (klcpu_t *)find_component(brd, (klinfo_t *)acpu,
KLSTRUCT_CPU);
@@ -87,7 +75,7 @@ void cpu_node_probe(void)
if (nasid == INVALID_NASID)
break;
node_set_online(nasid);
- highest = do_cpumask(nasid, highest);
+ highest = node_scan_cpus(nasid, highest);
}
printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes());
@@ -180,7 +168,8 @@ static void __init ip27_smp_setup(void)
/*
* PROM sets up system, that boot cpu is always first CPU on nasid 0
*/
- alloc_cpupda(0, 0, 0);
+ cputonasid(0) = 0;
+ cputoslice(0) = LOCAL_HUB_L(PI_CPU_NUM);
}
static void __init ip27_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 17302bbfa7a6..61f3565f3645 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -25,17 +25,14 @@
#include <asm/sn/klconfig.h>
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
-#include <asm/sn/sn_private.h>
-#include <asm/sn/sn0/ip27.h>
-#include <asm/sn/sn0/hub.h>
+#include <asm/sn/agent.h>
+
+#include "ip27-common.h"
#define TICK_SIZE (tick_nsec / 1000)
/* Includes for ioc3_init(). */
#include <asm/sn/types.h>
-#include <asm/sn/sn0/addrs.h>
-#include <asm/sn/sn0/hubni.h>
-#include <asm/sn/sn0/hubio.h>
#include <asm/pci/bridge.h>
#include "ip27-common.h"
@@ -153,25 +150,6 @@ void __init plat_time_init(void)
hub_rt_clock_event_init();
}
-void cpu_time_init(void)
-{
- lboard_t *board;
- klcpu_t *cpu;
- int cpuid;
-
- /* Don't use ARCS. ARCS is fragile. Klconfig is simple and sane. */
- board = find_lboard(KL_CONFIG_INFO(get_nasid()), KLTYPE_IP27);
- if (!board)
- panic("Can't find board info for myself.");
-
- cpuid = LOCAL_HUB_L(PI_CPU_NUM) ? IP27_CPU0_INDEX : IP27_CPU1_INDEX;
- cpu = (klcpu_t *) KLCF_COMP(board, cpuid);
- if (!cpu)
- panic("No information about myself?");
-
- printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
-}
-
void hub_rtc_init(nasid_t nasid)
{
@@ -190,23 +168,3 @@ void hub_rtc_init(nasid_t nasid)
LOCAL_HUB_S(PI_RT_PEND_B, 0);
}
}
-
-static int __init sgi_ip27_rtc_devinit(void)
-{
- struct resource res;
-
- memset(&res, 0, sizeof(res));
- res.start = XPHYSADDR(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base +
- IOC3_BYTEBUS_DEV0);
- res.end = res.start + 32767;
- res.flags = IORESOURCE_MEM;
-
- return IS_ERR(platform_device_register_simple("rtc-m48t35", -1,
- &res, 1));
-}
-
-/*
- * kludge make this a device_initcall after ioc3 resource conflicts
- * are resolved
- */
-late_initcall(sgi_ip27_rtc_devinit);
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index 5218b900f855..000ede156bdc 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -15,7 +15,6 @@
#include <asm/sn/addrs.h>
#include <asm/sn/types.h>
#include <asm/sn/klconfig.h>
-#include <asm/sn/hub.h>
#include <asm/pci/bridge.h>
#include <asm/xtalk/xtalk.h>
diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
index d46655b914f1..c2ffcb920250 100644
--- a/arch/mips/sgi-ip30/ip30-irq.c
+++ b/arch/mips/sgi-ip30/ip30-irq.c
@@ -232,9 +232,10 @@ static void heart_domain_free(struct irq_domain *domain,
return;
irqd = irq_domain_get_irq_data(domain, virq);
- clear_bit(irqd->hwirq, heart_irq_map);
- if (irqd && irqd->chip_data)
+ if (irqd) {
+ clear_bit(irqd->hwirq, heart_irq_map);
kfree(irqd->chip_data);
+ }
}
static const struct irq_domain_ops heart_domain_ops = {
diff --git a/arch/mips/vdso/genvdso.c b/arch/mips/vdso/genvdso.c
index b66b6b1c4aeb..be57b832bbe0 100644
--- a/arch/mips/vdso/genvdso.c
+++ b/arch/mips/vdso/genvdso.c
@@ -251,6 +251,18 @@ int main(int argc, char **argv)
fprintf(out_file, "#include <linux/linkage.h>\n");
fprintf(out_file, "#include <linux/mm.h>\n");
fprintf(out_file, "#include <asm/vdso.h>\n");
+ fprintf(out_file, "static int vdso_mremap(\n");
+ fprintf(out_file, " const struct vm_special_mapping *sm,\n");
+ fprintf(out_file, " struct vm_area_struct *new_vma)\n");
+ fprintf(out_file, "{\n");
+ fprintf(out_file, " unsigned long new_size =\n");
+ fprintf(out_file, " new_vma->vm_end - new_vma->vm_start;\n");
+ fprintf(out_file, " if (vdso_image.size != new_size)\n");
+ fprintf(out_file, " return -EINVAL;\n");
+ fprintf(out_file, " current->mm->context.vdso =\n");
+ fprintf(out_file, " (void __user *)(new_vma->vm_start);\n");
+ fprintf(out_file, " return 0;\n");
+ fprintf(out_file, "}\n");
/* Write out the stripped VDSO data. */
fprintf(out_file,
@@ -275,6 +287,7 @@ int main(int argc, char **argv)
fprintf(out_file, "\t.mapping = {\n");
fprintf(out_file, "\t\t.name = \"[vdso]\",\n");
fprintf(out_file, "\t\t.pages = vdso_pages,\n");
+ fprintf(out_file, "\t\t.mremap = vdso_mremap,\n");
fprintf(out_file, "\t},\n");
/* Calculate and write symbol offsets to <output file> */
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 420900852166..7a4a41dddc97 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2004,5 +2004,18 @@ config RAVE_SP_CORE
Select this to get support for the Supervisory Processor
device found on several devices in RAVE line of hardware.
+config SGI_MFD_IOC3
+ tristate "SGI IOC3 core driver"
+ depends on PCI && MIPS && 64BIT
+ select MFD_CORE
+ help
+ This option enables basic support for the SGI IOC3-based
+ controller cards. This option does not enable any specific
+ functions on such a card, but provides necessary infrastructure
+ for other drivers to utilize.
+
+ If you have an SGI Origin, Octane, or a PCI IOC3 card,
+ then say Y. Otherwise say N.
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index aed99f08739f..5fe930c76ade 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -255,3 +255,4 @@ obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
+obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
diff --git a/drivers/mfd/ioc3.c b/drivers/mfd/ioc3.c
new file mode 100644
index 000000000000..02998d4eb74b
--- /dev/null
+++ b/drivers/mfd/ioc3.c
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 multifunction device driver
+ *
+ * Copyright (C) 2018, 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * Based on work by:
+ * Stanislaw Skowronek <skylark@unaligned.org>
+ * Joshua Kinard <kumba@gentoo.org>
+ * Brent Casavant <bcasavan@sgi.com> - IOC4 master driver
+ * Pat Gefre <pfg@sgi.com> - IOC3 serial port IRQ demuxer
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sgi-w1.h>
+#include <linux/rtc/ds1685.h>
+
+#include <asm/pci/bridge.h>
+#include <asm/sn/ioc3.h>
+
+#define IOC3_IRQ_SERIAL_A 6
+#define IOC3_IRQ_SERIAL_B 15
+#define IOC3_IRQ_KBD 22
+
+/* Bitmask for selecting which IRQs are level triggered */
+#define IOC3_LVL_MASK (BIT(IOC3_IRQ_SERIAL_A) | BIT(IOC3_IRQ_SERIAL_B))
+
+#define M48T35_REG_SIZE 32768 /* size of m48t35 registers */
+
+/* 1.2 us latency timer (40 cycles at 33 MHz) */
+#define IOC3_LATENCY 40
+
+struct ioc3_priv_data {
+ struct irq_domain *domain;
+ struct ioc3 __iomem *regs;
+ struct pci_dev *pdev;
+ int domain_irq;
+};
+
+static void ioc3_irq_ack(struct irq_data *d)
+{
+ struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+
+ writel(BIT(hwirq), &ipd->regs->sio_ir);
+}
+
+static void ioc3_irq_mask(struct irq_data *d)
+{
+ struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+
+ writel(BIT(hwirq), &ipd->regs->sio_iec);
+}
+
+static void ioc3_irq_unmask(struct irq_data *d)
+{
+ struct ioc3_priv_data *ipd = irq_data_get_irq_chip_data(d);
+ unsigned int hwirq = irqd_to_hwirq(d);
+
+ writel(BIT(hwirq), &ipd->regs->sio_ies);
+}
+
+static struct irq_chip ioc3_irq_chip = {
+ .name = "IOC3",
+ .irq_ack = ioc3_irq_ack,
+ .irq_mask = ioc3_irq_mask,
+ .irq_unmask = ioc3_irq_unmask,
+};
+
+static int ioc3_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ /* Set level IRQs for every interrupt contained in IOC3_LVL_MASK */
+ if (BIT(hwirq) & IOC3_LVL_MASK)
+ irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_level_irq);
+ else
+ irq_set_chip_and_handler(irq, &ioc3_irq_chip, handle_edge_irq);
+
+ irq_set_chip_data(irq, d->host_data);
+ return 0;
+}
+
+static void ioc3_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops ioc3_irq_domain_ops = {
+ .map = ioc3_irq_domain_map,
+ .unmap = ioc3_irq_domain_unmap,
+};
+
+static void ioc3_irq_handler(struct irq_desc *desc)
+{
+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
+ struct ioc3_priv_data *ipd = domain->host_data;
+ struct ioc3 __iomem *regs = ipd->regs;
+ u32 pending, mask;
+ unsigned int irq;
+
+ pending = readl(&regs->sio_ir);
+ mask = readl(&regs->sio_ies);
+ pending &= mask; /* Mask off not enabled interrupts */
+
+ if (pending) {
+ irq = irq_find_mapping(domain, __ffs(pending));
+ if (irq)
+ generic_handle_irq(irq);
+ } else {
+ spurious_interrupt();
+ }
+}
+
+/*
+ * System boards/BaseIOs use more interrupt pins of the bridge ASIC
+ * to which the IOC3 is connected. Since the IOC3 MFD driver
+ * knows wiring of these extra pins, we use the map_irq function
+ * to get interrupts activated
+ */
+static int ioc3_map_irq(struct pci_dev *pdev, int slot, int pin)
+{
+ struct pci_host_bridge *hbrg = pci_find_host_bridge(pdev->bus);
+
+ return hbrg->map_irq(pdev, slot, pin);
+}
+
+static int ioc3_irq_domain_setup(struct ioc3_priv_data *ipd, int irq)
+{
+ struct irq_domain *domain;
+ struct fwnode_handle *fn;
+
+ fn = irq_domain_alloc_named_fwnode("IOC3");
+ if (!fn)
+ goto err;
+
+ domain = irq_domain_create_linear(fn, 24, &ioc3_irq_domain_ops, ipd);
+ if (!domain)
+ goto err;
+
+ irq_domain_free_fwnode(fn);
+ ipd->domain = domain;
+
+ irq_set_chained_handler_and_data(irq, ioc3_irq_handler, domain);
+ ipd->domain_irq = irq;
+ return 0;
+
+err:
+ dev_err(&ipd->pdev->dev, "irq domain setup failed\n");
+ return -ENOMEM;
+}
+
+static struct resource ioc3_uarta_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta),
+ sizeof_field(struct ioc3, sregs.uarta)),
+ DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A)
+};
+
+static struct resource ioc3_uartb_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb),
+ sizeof_field(struct ioc3, sregs.uartb)),
+ DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B)
+};
+
+static struct mfd_cell ioc3_serial_cells[] = {
+ {
+ .name = "ioc3-serial8250",
+ .resources = ioc3_uarta_resources,
+ .num_resources = ARRAY_SIZE(ioc3_uarta_resources),
+ },
+ {
+ .name = "ioc3-serial8250",
+ .resources = ioc3_uartb_resources,
+ .num_resources = ARRAY_SIZE(ioc3_uartb_resources),
+ }
+};
+
+static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ /* Set gpio pins for RS232/RS422 mode selection */
+ writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL,
+ &ipd->regs->gpcr_s);
+ /* Select RS232 mode for uart a */
+ writel(0, &ipd->regs->gppr[6]);
+ /* Select RS232 mode for uart b */
+ writel(0, &ipd->regs->gppr[7]);
+
+ /* Switch both ports to 16650 mode */
+ writel(readl(&ipd->regs->port_a.sscr) & ~SSCR_DMA_EN,
+ &ipd->regs->port_a.sscr);
+ writel(readl(&ipd->regs->port_b.sscr) & ~SSCR_DMA_EN,
+ &ipd->regs->port_b.sscr);
+ udelay(1000); /* Wait until mode switch is done */
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells),
+ &ipd->pdev->resource[0], 0, ipd->domain);
+ if (ret) {
+ dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct resource ioc3_kbd_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, serio),
+ sizeof_field(struct ioc3, serio)),
+ DEFINE_RES_IRQ(IOC3_IRQ_KBD)
+};
+
+static struct mfd_cell ioc3_kbd_cells[] = {
+ {
+ .name = "ioc3-kbd",
+ .resources = ioc3_kbd_resources,
+ .num_resources = ARRAY_SIZE(ioc3_kbd_resources),
+ }
+};
+
+static int ioc3_kbd_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_kbd_cells, ARRAY_SIZE(ioc3_kbd_cells),
+ &ipd->pdev->resource[0], 0, ipd->domain);
+ if (ret) {
+ dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct resource ioc3_eth_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, eth),
+ sizeof_field(struct ioc3, eth)),
+ DEFINE_RES_MEM(offsetof(struct ioc3, ssram),
+ sizeof_field(struct ioc3, ssram)),
+ DEFINE_RES_IRQ(0)
+};
+
+static struct resource ioc3_w1_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, mcr),
+ sizeof_field(struct ioc3, mcr)),
+};
+static struct sgi_w1_platform_data ioc3_w1_platform_data;
+
+static struct mfd_cell ioc3_eth_cells[] = {
+ {
+ .name = "ioc3-eth",
+ .resources = ioc3_eth_resources,
+ .num_resources = ARRAY_SIZE(ioc3_eth_resources),
+ },
+ {
+ .name = "sgi_w1",
+ .resources = ioc3_w1_resources,
+ .num_resources = ARRAY_SIZE(ioc3_w1_resources),
+ .platform_data = &ioc3_w1_platform_data,
+ .pdata_size = sizeof(ioc3_w1_platform_data),
+ }
+};
+
+static int ioc3_eth_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ /* Enable One-Wire bus */
+ writel(GPCR_MLAN_EN, &ipd->regs->gpcr_s);
+
+ /* Generate unique identifier */
+ snprintf(ioc3_w1_platform_data.dev_id,
+ sizeof(ioc3_w1_platform_data.dev_id), "ioc3-%012llx",
+ ipd->pdev->resource->start);
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_eth_cells, ARRAY_SIZE(ioc3_eth_cells),
+ &ipd->pdev->resource[0], ipd->pdev->irq, NULL);
+ if (ret) {
+ dev_err(&ipd->pdev->dev, "Failed to add ETH/W1 subdev\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct resource ioc3_m48t35_resources[] = {
+ DEFINE_RES_MEM(IOC3_BYTEBUS_DEV0, M48T35_REG_SIZE)
+};
+
+static struct mfd_cell ioc3_m48t35_cells[] = {
+ {
+ .name = "rtc-m48t35",
+ .resources = ioc3_m48t35_resources,
+ .num_resources = ARRAY_SIZE(ioc3_m48t35_resources),
+ }
+};
+
+static int ioc3_m48t35_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
+ ioc3_m48t35_cells, ARRAY_SIZE(ioc3_m48t35_cells),
+ &ipd->pdev->resource[0], 0, ipd->domain);
+ if (ret)
+ dev_err(&ipd->pdev->dev, "Failed to add M48T35 subdev\n");
+
+ return ret;
+}
+
+static struct ds1685_rtc_platform_data ip30_rtc_platform_data = {
+ .bcd_mode = false,
+ .no_irq = false,
+ .uie_unsupported = true,
+ .access_type = ds1685_reg_indirect,
+};
+
+static struct resource ioc3_rtc_ds1685_resources[] = {
+ DEFINE_RES_MEM(IOC3_BYTEBUS_DEV1, 1),
+ DEFINE_RES_MEM(IOC3_BYTEBUS_DEV2, 1),
+ DEFINE_RES_IRQ(0)
+};
+
+static struct mfd_cell ioc3_ds1685_cells[] = {
+ {
+ .name = "rtc-ds1685",
+ .resources = ioc3_rtc_ds1685_resources,
+ .num_resources = ARRAY_SIZE(ioc3_rtc_ds1685_resources),
+ .platform_data = &ip30_rtc_platform_data,
+ .pdata_size = sizeof(ip30_rtc_platform_data),
+ .id = PLATFORM_DEVID_NONE,
+ }
+};
+
+static int ioc3_ds1685_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, irq;
+
+ irq = ioc3_map_irq(ipd->pdev, 6, 0);
+
+ ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_ds1685_cells,
+ ARRAY_SIZE(ioc3_ds1685_cells),
+ &ipd->pdev->resource[0], irq, NULL);
+ if (ret)
+ dev_err(&ipd->pdev->dev, "Failed to add DS1685 subdev\n");
+
+ return ret;
+};
+
+
+static struct resource ioc3_leds_resources[] = {
+ DEFINE_RES_MEM(offsetof(struct ioc3, gppr[0]),
+ sizeof_field(struct ioc3, gppr[0])),
+ DEFINE_RES_MEM(offsetof(struct ioc3, gppr[1]),
+ sizeof_field(struct ioc3, gppr[1])),
+};
+
+static struct mfd_cell ioc3_led_cells[] = {
+ {
+ .name = "ip30-leds",
+ .resources = ioc3_leds_resources,
+ .num_resources = ARRAY_SIZE(ioc3_leds_resources),
+ .id = PLATFORM_DEVID_NONE,
+ }
+};
+
+static int ioc3_led_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = mfd_add_devices(&ipd->pdev->dev, 0, ioc3_led_cells,
+ ARRAY_SIZE(ioc3_led_cells),
+ &ipd->pdev->resource[0], 0, ipd->domain);
+ if (ret)
+ dev_err(&ipd->pdev->dev, "Failed to add LED subdev\n");
+
+ return ret;
+}
+
+static int ip27_baseio_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
+ PCI_INTERRUPT_INTB);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_m48t35_setup(ipd);
+}
+
+static int ip27_baseio6g_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
+ PCI_INTERRUPT_INTB);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_m48t35_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_kbd_setup(ipd);
+}
+
+static int ip27_mio_setup(struct ioc3_priv_data *ipd)
+{
+ int ret;
+
+ ret = ioc3_irq_domain_setup(ipd, ipd->pdev->irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_kbd_setup(ipd);
+}
+
+static int ip30_sysboard_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
+ PCI_INTERRUPT_INTB);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_serial_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_kbd_setup(ipd);
+ if (ret)
+ return ret;
+
+ ret = ioc3_ds1685_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_led_setup(ipd);
+}
+
+static int ioc3_menet_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
+ PCI_INTERRUPT_INTB);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_serial_setup(ipd);
+}
+
+static int ioc3_menet4_setup(struct ioc3_priv_data *ipd)
+{
+ return ioc3_eth_setup(ipd);
+}
+
+static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd)
+{
+ int ret, io_irq;
+
+ io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
+ PCI_INTERRUPT_INTB);
+ ret = ioc3_irq_domain_setup(ipd, io_irq);
+ if (ret)
+ return ret;
+
+ ret = ioc3_eth_setup(ipd);
+ if (ret)
+ return ret;
+
+ return ioc3_kbd_setup(ipd);
+}
+
+/* Helper macro for filling ioc3_info array */
+#define IOC3_SID(_name, _sid, _setup) \
+ { \
+ .name = _name, \
+ .sid = PCI_VENDOR_ID_SGI | (IOC3_SUBSYS_ ## _sid << 16), \
+ .setup = _setup, \
+ }
+
+static struct {
+ const char *name;
+ u32 sid;
+ int (*setup)(struct ioc3_priv_data *ipd);
+} ioc3_infos[] = {
+ IOC3_SID("IP27 BaseIO6G", IP27_BASEIO6G, &ip27_baseio6g_setup),
+ IOC3_SID("IP27 MIO", IP27_MIO, &ip27_mio_setup),
+ IOC3_SID("IP27 BaseIO", IP27_BASEIO, &ip27_baseio_setup),
+ IOC3_SID("IP29 System Board", IP29_SYSBOARD, &ip27_baseio6g_setup),
+ IOC3_SID("IP30 System Board", IP30_SYSBOARD, &ip30_sysboard_setup),
+ IOC3_SID("MENET", MENET, &ioc3_menet_setup),
+ IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup)
+};
+#undef IOC3_SID
+
+static int ioc3_setup(struct ioc3_priv_data *ipd)
+{
+ u32 sid;
+ int i;
+
+ /* Clear IRQs */
+ writel(~0, &ipd->regs->sio_iec);
+ writel(~0, &ipd->regs->sio_ir);
+ writel(0, &ipd->regs->eth.eier);
+ writel(~0, &ipd->regs->eth.eisr);
+
+ /* Read subsystem vendor id and subsystem id */
+ pci_read_config_dword(ipd->pdev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
+
+ for (i = 0; i < ARRAY_SIZE(ioc3_infos); i++)
+ if (sid == ioc3_infos[i].sid) {
+ pr_info("ioc3: %s\n", ioc3_infos[i].name);
+ return ioc3_infos[i].setup(ipd);
+ }
+
+ /* Treat everything not identified by PCI subid as CAD DUO */
+ pr_info("ioc3: CAD DUO\n");
+ return ioc3_cad_duo_setup(ipd);
+}
+
+static int ioc3_mfd_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pci_id)
+{
+ struct ioc3_priv_data *ipd;
+ struct ioc3 __iomem *regs;
+ int ret;
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, IOC3_LATENCY);
+ pci_set_master(pdev);
+
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (ret) {
+ pr_err("%s: No usable DMA configuration, aborting.\n",
+ pci_name(pdev));
+ goto out_disable_device;
+ }
+
+ /* Set up per-IOC3 data */
+ ipd = devm_kzalloc(&pdev->dev, sizeof(struct ioc3_priv_data),
+ GFP_KERNEL);
+ if (!ipd) {
+ ret = -ENOMEM;
+ goto out_disable_device;
+ }
+ ipd->pdev = pdev;
+
+ /*
+ * Map all IOC3 registers. These are shared between subdevices
+ * so the main IOC3 module manages them.
+ */
+ regs = pci_ioremap_bar(pdev, 0);
+ if (!regs) {
+ dev_warn(&pdev->dev, "ioc3: Unable to remap PCI BAR for %s.\n",
+ pci_name(pdev));
+ ret = -ENOMEM;
+ goto out_disable_device;
+ }
+ ipd->regs = regs;
+
+ /* Track PCI-device specific data */
+ pci_set_drvdata(pdev, ipd);
+
+ ret = ioc3_setup(ipd);
+ if (ret) {
+ /* Remove all already added MFD devices */
+ mfd_remove_devices(&ipd->pdev->dev);
+ if (ipd->domain) {
+ irq_domain_remove(ipd->domain);
+ free_irq(ipd->domain_irq, (void *)ipd);
+ }
+ pci_iounmap(pdev, regs);
+ goto out_disable_device;
+ }
+
+ return 0;
+
+out_disable_device:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void ioc3_mfd_remove(struct pci_dev *pdev)
+{
+ struct ioc3_priv_data *ipd;
+
+ ipd = pci_get_drvdata(pdev);
+
+ /* Clear and disable all IRQs */
+ writel(~0, &ipd->regs->sio_iec);
+ writel(~0, &ipd->regs->sio_ir);
+
+ /* Release resources */
+ mfd_remove_devices(&ipd->pdev->dev);
+ if (ipd->domain) {
+ irq_domain_remove(ipd->domain);
+ free_irq(ipd->domain_irq, (void *)ipd);
+ }
+ pci_iounmap(pdev, ipd->regs);
+ pci_disable_device(pdev);
+}
+
+static struct pci_device_id ioc3_mfd_id_table[] = {
+ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, ioc3_mfd_id_table);
+
+static struct pci_driver ioc3_mfd_driver = {
+ .name = "IOC3",
+ .id_table = ioc3_mfd_id_table,
+ .probe = ioc3_mfd_probe,
+ .remove = ioc3_mfd_remove,
+};
+
+module_pci_driver(ioc3_mfd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 MFD driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig
index 37f048e1230c..bc26fa0d196f 100644
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
@@ -6,7 +6,7 @@
config NET_VENDOR_SGI
bool "SGI devices"
default y
- depends on (PCI && SGI_IP27) || SGI_IP32
+ depends on (PCI && SGI_MFD_IOC3) || SGI_IP32
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
@@ -19,7 +19,8 @@ if NET_VENDOR_SGI
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
- depends on PCI && SGI_IP27
+ depends on PCI && SGI_MFD_IOC3
+ select CRC16
select CRC32
select MII
---help---
diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c
index 06637b03deed..e61eb891c0f7 100644
--- a/drivers/net/ethernet/sgi/ioc3-eth.c
+++ b/drivers/net/ethernet/sgi/ioc3-eth.c
@@ -14,7 +14,6 @@
* o Use prefetching for large packets. What is a good lower limit for
* prefetching?
* o Use hardware checksums.
- * o Convert to using a IOC3 meta driver.
* o Which PHYs might possibly be attached to the IOC3 in real live,
* which workarounds are required for them? Do we ever have Lucent's?
* o For the 2.5 branch kill the mii-tool ioctls.
@@ -28,7 +27,8 @@
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/module.h>
-#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/crc16.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/in.h>
@@ -37,28 +37,22 @@
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/gfp.h>
-
-#ifdef CONFIG_SERIAL_8250
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#endif
-
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/nvmem-consumer.h>
#include <net/ip.h>
-#include <asm/byteorder.h>
-#include <asm/pgtable.h>
-#include <linux/uaccess.h>
-#include <asm/sn/types.h>
#include <asm/sn/ioc3.h>
#include <asm/pci/bridge.h>
+#define CRC16_INIT 0
+#define CRC16_VALID 0xb001
+
/* Number of RX buffers. This is tunable in the range of 16 <= x < 512.
* The value must be a power of two.
*/
@@ -85,7 +79,6 @@
/* Private per NIC data of the driver. */
struct ioc3_private {
struct ioc3_ethregs *regs;
- struct ioc3 *all_regs;
struct device *dma_dev;
u32 *ssram;
unsigned long *rxr; /* pointer to receiver ring */
@@ -104,9 +97,6 @@ struct ioc3_private {
spinlock_t ioc3_lock;
struct mii_if_info mii;
- struct net_device *dev;
- struct pci_dev *pdev;
-
/* Members used by autonegotiation */
struct timer_list ioc3_timer;
};
@@ -123,10 +113,8 @@ static int ioc3_alloc_rx_bufs(struct net_device *dev);
static void ioc3_free_rx_bufs(struct ioc3_private *ip);
static inline void ioc3_clean_tx_ring(struct ioc3_private *ip);
-static const char ioc3_str[] = "IOC3 Ethernet";
static const struct ethtool_ops ioc3_ethtool_ops;
-
static inline unsigned long aligned_rx_skb_addr(unsigned long addr)
{
return (~addr + 1) & (IOC3_DMA_XFER_LEN - 1UL);
@@ -179,225 +167,61 @@ static inline unsigned long ioc3_map(dma_addr_t addr, unsigned long attr)
#define ERBAR_VAL 0
#endif
-#define IOC3_SIZE 0x100000
-
-static inline u32 mcr_pack(u32 pulse, u32 sample)
-{
- return (pulse << 10) | (sample << 2);
-}
-
-static int nic_wait(u32 __iomem *mcr)
-{
- u32 m;
-
- do {
- m = readl(mcr);
- } while (!(m & 2));
-
- return m & 1;
-}
-
-static int nic_reset(u32 __iomem *mcr)
-{
- int presence;
-
- writel(mcr_pack(500, 65), mcr);
- presence = nic_wait(mcr);
-
- writel(mcr_pack(0, 500), mcr);
- nic_wait(mcr);
-
- return presence;
-}
-
-static inline int nic_read_bit(u32 __iomem *mcr)
-{
- int result;
-
- writel(mcr_pack(6, 13), mcr);
- result = nic_wait(mcr);
- writel(mcr_pack(0, 100), mcr);
- nic_wait(mcr);
-
- return result;
-}
-
-static inline void nic_write_bit(u32 __iomem *mcr, int bit)
+static int ioc3eth_nvmem_match(struct device *dev, const void *data)
{
- if (bit)
- writel(mcr_pack(6, 110), mcr);
- else
- writel(mcr_pack(80, 30), mcr);
+ const char *name = dev_name(dev);
+ const char *prefix = data;
+ int prefix_len;
- nic_wait(mcr);
-}
-
-/* Read a byte from an iButton device
- */
-static u32 nic_read_byte(u32 __iomem *mcr)
-{
- u32 result = 0;
- int i;
+ prefix_len = strlen(prefix);
+ if (strlen(name) < (prefix_len + 3))
+ return 0;
- for (i = 0; i < 8; i++)
- result = (result >> 1) | (nic_read_bit(mcr) << 7);
+ if (memcmp(prefix, name, prefix_len) != 0)
+ return 0;
- return result;
-}
-
-/* Write a byte to an iButton device
- */
-static void nic_write_byte(u32 __iomem *mcr, int byte)
-{
- int i, bit;
-
- for (i = 8; i; i--) {
- bit = byte & 1;
- byte >>= 1;
-
- nic_write_bit(mcr, bit);
- }
-}
-
-static u64 nic_find(u32 __iomem *mcr, int *last)
-{
- int a, b, index, disc;
- u64 address = 0;
-
- nic_reset(mcr);
- /* Search ROM. */
- nic_write_byte(mcr, 0xf0);
-
- /* Algorithm from ``Book of iButton Standards''. */
- for (index = 0, disc = 0; index < 64; index++) {
- a = nic_read_bit(mcr);
- b = nic_read_bit(mcr);
-
- if (a && b) {
- pr_warn("NIC search failed (not fatal).\n");
- *last = 0;
- return 0;
- }
-
- if (!a && !b) {
- if (index == *last) {
- address |= 1UL << index;
- } else if (index > *last) {
- address &= ~(1UL << index);
- disc = index;
- } else if ((address & (1UL << index)) == 0) {
- disc = index;
- }
- nic_write_bit(mcr, address & (1UL << index));
- continue;
- } else {
- if (a)
- address |= 1UL << index;
- else
- address &= ~(1UL << index);
- nic_write_bit(mcr, a);
- continue;
- }
- }
-
- *last = disc;
-
- return address;
-}
-
-static int nic_init(u32 __iomem *mcr)
-{
- const char *unknown = "unknown";
- const char *type = unknown;
- u8 crc;
- u8 serial[6];
- int save = 0, i;
-
- while (1) {
- u64 reg;
-
- reg = nic_find(mcr, &save);
-
- switch (reg & 0xff) {
- case 0x91:
- type = "DS1981U";
- break;
- default:
- if (save == 0) {
- /* Let the caller try again. */
- return -1;
- }
- continue;
- }
-
- nic_reset(mcr);
-
- /* Match ROM. */
- nic_write_byte(mcr, 0x55);
- for (i = 0; i < 8; i++)
- nic_write_byte(mcr, (reg >> (i << 3)) & 0xff);
-
- reg >>= 8; /* Shift out type. */
- for (i = 0; i < 6; i++) {
- serial[i] = reg & 0xff;
- reg >>= 8;
- }
- crc = reg & 0xff;
- break;
- }
-
- pr_info("Found %s NIC", type);
- if (type != unknown)
- pr_cont(" registration number %pM, CRC %02x", serial, crc);
- pr_cont(".\n");
+ /* found nvmem device which is attached to our ioc3
+ * now check for one wire family code 09, 89 and 91
+ */
+ if (memcmp(name + prefix_len, "09-", 3) == 0)
+ return 1;
+ if (memcmp(name + prefix_len, "89-", 3) == 0)
+ return 1;
+ if (memcmp(name + prefix_len, "91-", 3) == 0)
+ return 1;
return 0;
}
-/* Read the NIC (Number-In-a-Can) device used to store the MAC address on
- * SN0 / SN00 nodeboards and PCI cards.
- */
-static void ioc3_get_eaddr_nic(struct ioc3_private *ip)
+static int ioc3eth_get_mac_addr(struct resource *res, u8 mac_addr[6])
{
- u32 __iomem *mcr = &ip->all_regs->mcr;
- int tries = 2; /* There may be some problem with the battery? */
- u8 nic[14];
+ struct nvmem_device *nvmem;
+ char prefix[24];
+ u8 prom[16];
+ int ret;
int i;
- writel(1 << 21, &ip->all_regs->gpcr_s);
+ snprintf(prefix, sizeof(prefix), "ioc3-%012llx-",
+ res->start & ~0xffff);
- while (tries--) {
- if (!nic_init(mcr))
- break;
- udelay(500);
- }
-
- if (tries < 0) {
- pr_err("Failed to read MAC address\n");
- return;
- }
+ nvmem = nvmem_device_find(prefix, ioc3eth_nvmem_match);
+ if (IS_ERR(nvmem))
+ return PTR_ERR(nvmem);
- /* Read Memory. */
- nic_write_byte(mcr, 0xf0);
- nic_write_byte(mcr, 0x00);
- nic_write_byte(mcr, 0x00);
+ ret = nvmem_device_read(nvmem, 0, 16, prom);
+ nvmem_device_put(nvmem);
+ if (ret < 0)
+ return ret;
- for (i = 13; i >= 0; i--)
- nic[i] = nic_read_byte(mcr);
+ /* check, if content is valid */
+ if (prom[0] != 0x0a ||
+ crc16(CRC16_INIT, prom, 13) != CRC16_VALID)
+ return -EINVAL;
- for (i = 2; i < 8; i++)
- ip->dev->dev_addr[i - 2] = nic[i];
-}
-
-/* Ok, this is hosed by design. It's necessary to know what machine the
- * NIC is in in order to know how to read the NIC address. We also have
- * to know if it's a PCI card or a NIC in on the node board ...
- */
-static void ioc3_get_eaddr(struct ioc3_private *ip)
-{
- ioc3_get_eaddr_nic(ip);
+ for (i = 0; i < 6; i++)
+ mac_addr[i] = prom[10 - i];
- pr_info("Ethernet address is %pM.\n", ip->dev->dev_addr);
+ return 0;
}
static void __ioc3_set_mac_address(struct net_device *dev)
@@ -770,7 +594,7 @@ static int ioc3_mii_init(struct ioc3_private *ip)
u16 word;
for (i = 0; i < 32; i++) {
- word = ioc3_mdio_read(ip->dev, i, MII_PHYSID1);
+ word = ioc3_mdio_read(ip->mii.dev, i, MII_PHYSID1);
if (word != 0xffff && word != 0x0000) {
found = 1;
@@ -975,12 +799,6 @@ static int ioc3_open(struct net_device *dev)
{
struct ioc3_private *ip = netdev_priv(dev);
- if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) {
- netdev_err(dev, "Can't get irq %d\n", dev->irq);
-
- return -EAGAIN;
- }
-
ip->ehar_h = 0;
ip->ehar_l = 0;
@@ -1013,147 +831,6 @@ static int ioc3_close(struct net_device *dev)
return 0;
}
-/* MENET cards have four IOC3 chips, which are attached to two sets of
- * PCI slot resources each: the primary connections are on slots
- * 0..3 and the secondaries are on 4..7
- *
- * All four ethernets are brought out to connectors; six serial ports
- * (a pair from each of the first three IOC3s) are brought out to
- * MiniDINs; all other subdevices are left swinging in the wind, leave
- * them disabled.
- */
-
-static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
-{
- struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0));
- int ret = 0;
-
- if (dev) {
- if (dev->vendor == PCI_VENDOR_ID_SGI &&
- dev->device == PCI_DEVICE_ID_SGI_IOC3)
- ret = 1;
- pci_dev_put(dev);
- }
-
- return ret;
-}
-
-static int ioc3_is_menet(struct pci_dev *pdev)
-{
- return !pdev->bus->parent &&
- ioc3_adjacent_is_ioc3(pdev, 0) &&
- ioc3_adjacent_is_ioc3(pdev, 1) &&
- ioc3_adjacent_is_ioc3(pdev, 2);
-}
-
-#ifdef CONFIG_SERIAL_8250
-/* Note about serial ports and consoles:
- * For console output, everyone uses the IOC3 UARTA (offset 0x178)
- * connected to the master node (look in ip27_setup_console() and
- * ip27prom_console_write()).
- *
- * For serial (/dev/ttyS0 etc), we can not have hardcoded serial port
- * addresses on a partitioned machine. Since we currently use the ioc3
- * serial ports, we use dynamic serial port discovery that the serial.c
- * driver uses for pci/pnp ports (there is an entry for the SGI ioc3
- * boards in pci_boards[]). Unfortunately, UARTA's pio address is greater
- * than UARTB's, although UARTA on o200s has traditionally been known as
- * port 0. So, we just use one serial port from each ioc3 (since the
- * serial driver adds addresses to get to higher ports).
- *
- * The first one to do a register_console becomes the preferred console
- * (if there is no kernel command line console= directive). /dev/console
- * (ie 5, 1) is then "aliased" into the device number returned by the
- * "device" routine referred to in this console structure
- * (ip27prom_console_dev).
- *
- * Also look in ip27-pci.c:pci_fixup_ioc3() for some comments on working
- * around ioc3 oddities in this respect.
- *
- * The IOC3 serials use a 22MHz clock rate with an additional divider which
- * can be programmed in the SCR register if the DLAB bit is set.
- *
- * Register to interrupt zero because we share the interrupt with
- * the serial driver which we don't properly support yet.
- *
- * Can't use UPF_IOREMAP as the whole of IOC3 resources have already been
- * registered.
- */
-static void ioc3_8250_register(struct ioc3_uartregs __iomem *uart)
-{
-#define COSMISC_CONSTANT 6
-
- struct uart_8250_port port = {
- .port = {
- .irq = 0,
- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 0,
- .uartclk = (22000000 << 1) / COSMISC_CONSTANT,
-
- .membase = (unsigned char __iomem *)uart,
- .mapbase = (unsigned long)uart,
- }
- };
- unsigned char lcr;
-
- lcr = readb(&uart->iu_lcr);
- writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr);
- writeb(COSMISC_CONSTANT, &uart->iu_scr);
- writeb(lcr, &uart->iu_lcr);
- readb(&uart->iu_lcr);
- serial8250_register_8250_port(&port);
-}
-
-static void ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3)
-{
- u32 sio_iec;
-
- /* We need to recognice and treat the fourth MENET serial as it
- * does not have an SuperIO chip attached to it, therefore attempting
- * to access it will result in bus errors. We call something an
- * MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3
- * in it. This is paranoid but we want to avoid blowing up on a
- * showhorn PCI box that happens to have 4 IOC3 cards in it so it's
- * not paranoid enough ...
- */
- if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3)
- return;
-
- /* Switch IOC3 to PIO mode. It probably already was but let's be
- * paranoid
- */
- writel(GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL, &ioc3->gpcr_s);
- readl(&ioc3->gpcr_s);
- writel(0, &ioc3->gppr[6]);
- readl(&ioc3->gppr[6]);
- writel(0, &ioc3->gppr[7]);
- readl(&ioc3->gppr[7]);
- writel(readl(&ioc3->port_a.sscr) & ~SSCR_DMA_EN, &ioc3->port_a.sscr);
- readl(&ioc3->port_a.sscr);
- writel(readl(&ioc3->port_b.sscr) & ~SSCR_DMA_EN, &ioc3->port_b.sscr);
- readl(&ioc3->port_b.sscr);
- /* Disable all SA/B interrupts except for SA/B_INT in SIO_IEC. */
- sio_iec = readl(&ioc3->sio_iec);
- sio_iec &= ~(SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL |
- SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER |
- SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS |
- SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR);
- sio_iec |= SIO_IR_SA_INT;
- sio_iec &= ~(SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL |
- SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER |
- SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS |
- SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR);
- sio_iec |= SIO_IR_SB_INT;
- writel(sio_iec, &ioc3->sio_iec);
- writel(0, &ioc3->port_a.sscr);
- writel(0, &ioc3->port_b.sscr);
-
- ioc3_8250_register(&ioc3->sregs.uarta);
- ioc3_8250_register(&ioc3->sregs.uartb);
-}
-#endif
-
static const struct net_device_ops ioc3_netdev_ops = {
.ndo_open = ioc3_open,
.ndo_stop = ioc3_close,
@@ -1166,61 +843,52 @@ static const struct net_device_ops ioc3_netdev_ops = {
.ndo_set_mac_address = ioc3_set_mac_address,
};
-static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int ioc3eth_probe(struct platform_device *pdev)
{
- unsigned int sw_physid1, sw_physid2;
- struct net_device *dev = NULL;
+ u32 sw_physid1, sw_physid2, vendor, model, rev;
struct ioc3_private *ip;
- struct ioc3 *ioc3;
- unsigned long ioc3_base, ioc3_size;
- u32 vendor, model, rev;
+ struct net_device *dev;
+ struct resource *regs;
+ u8 mac_addr[6];
int err;
- /* Configure DMA attributes. */
- err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (err) {
- pr_err("%s: No usable DMA configuration, aborting.\n",
- pci_name(pdev));
- goto out;
- }
-
- if (pci_enable_device(pdev))
- return -ENODEV;
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ /* get mac addr from one wire prom */
+ if (ioc3eth_get_mac_addr(regs, mac_addr))
+ return -EPROBE_DEFER; /* not available yet */
dev = alloc_etherdev(sizeof(struct ioc3_private));
- if (!dev) {
- err = -ENOMEM;
- goto out_disable;
- }
-
- err = pci_request_regions(pdev, "ioc3");
- if (err)
- goto out_free;
+ if (!dev)
+ return -ENOMEM;
SET_NETDEV_DEV(dev, &pdev->dev);
ip = netdev_priv(dev);
- ip->dev = dev;
- ip->dma_dev = &pdev->dev;
-
- dev->irq = pdev->irq;
+ ip->dma_dev = pdev->dev.parent;
+ ip->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (!ip->regs) {
+ err = -ENOMEM;
+ goto out_free;
+ }
- ioc3_base = pci_resource_start(pdev, 0);
- ioc3_size = pci_resource_len(pdev, 0);
- ioc3 = (struct ioc3 *)ioremap(ioc3_base, ioc3_size);
- if (!ioc3) {
- pr_err("ioc3eth(%s): ioremap failed, goodbye.\n",
- pci_name(pdev));
+ ip->ssram = devm_platform_ioremap_resource(pdev, 1);
+ if (!ip->ssram) {
err = -ENOMEM;
- goto out_res;
+ goto out_free;
}
- ip->regs = &ioc3->eth;
- ip->ssram = ioc3->ssram;
- ip->all_regs = ioc3;
-#ifdef CONFIG_SERIAL_8250
- ioc3_serial_probe(pdev, ioc3);
-#endif
+ dev->irq = platform_get_irq(pdev, 0);
+ if (dev->irq < 0) {
+ err = dev->irq;
+ goto out_free;
+ }
+
+ if (devm_request_irq(&pdev->dev, dev->irq, ioc3_interrupt,
+ IRQF_SHARED, "ioc3-eth", dev)) {
+ dev_err(&pdev->dev, "Can't get irq %d\n", dev->irq);
+ err = -ENODEV;
+ goto out_free;
+ }
spin_lock_init(&ip->ioc3_lock);
timer_setup(&ip->ioc3_timer, ioc3_timer, 0);
@@ -1250,8 +918,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ioc3_init(dev);
- ip->pdev = pdev;
-
ip->mii.phy_id_mask = 0x1f;
ip->mii.reg_num_mask = 0x1f;
ip->mii.dev = dev;
@@ -1261,15 +927,14 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ioc3_mii_init(ip);
if (ip->mii.phy_id == -1) {
- pr_err("ioc3-eth(%s): Didn't find a PHY, goodbye.\n",
- pci_name(pdev));
+ netdev_err(dev, "Didn't find a PHY, goodbye.\n");
err = -ENODEV;
goto out_stop;
}
ioc3_mii_start(ip);
ioc3_ssram_disc(ip);
- ioc3_get_eaddr(ip);
+ memcpy(dev->dev_addr, mac_addr, ETH_ALEN);
/* The IOC3-specific entries in the device structure. */
dev->watchdog_timeo = 5 * HZ;
@@ -1306,21 +971,14 @@ out_stop:
if (ip->tx_ring)
dma_free_coherent(ip->dma_dev, TX_RING_SIZE, ip->tx_ring,
ip->txr_dma);
-out_res:
- pci_release_regions(pdev);
out_free:
free_netdev(dev);
-out_disable:
- /* We should call pci_disable_device(pdev); here if the IOC3 wasn't
- * such a weird device ...
- */
-out:
return err;
}
-static void ioc3_remove_one(struct pci_dev *pdev)
+static int ioc3eth_remove(struct platform_device *pdev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
+ struct net_device *dev = platform_get_drvdata(pdev);
struct ioc3_private *ip = netdev_priv(dev);
dma_free_coherent(ip->dma_dev, RX_RING_SIZE, ip->rxr, ip->rxr_dma);
@@ -1328,27 +986,11 @@ static void ioc3_remove_one(struct pci_dev *pdev)
unregister_netdev(dev);
del_timer_sync(&ip->ioc3_timer);
-
- iounmap(ip->all_regs);
- pci_release_regions(pdev);
free_netdev(dev);
- /* We should call pci_disable_device(pdev); here if the IOC3 wasn't
- * such a weird device ...
- */
-}
-static const struct pci_device_id ioc3_pci_tbl[] = {
- { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, ioc3_pci_tbl);
+ return 0;
+}
-static struct pci_driver ioc3_driver = {
- .name = "ioc3-eth",
- .id_table = ioc3_pci_tbl,
- .probe = ioc3_probe,
- .remove = ioc3_remove_one,
-};
static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
@@ -1530,11 +1172,10 @@ static inline unsigned int ioc3_hash(const unsigned char *addr)
static void ioc3_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- struct ioc3_private *ip = netdev_priv(dev);
-
strlcpy(info->driver, IOC3_NAME, sizeof(info->driver));
strlcpy(info->version, IOC3_VERSION, sizeof(info->version));
- strlcpy(info->bus_info, pci_name(ip->pdev), sizeof(info->bus_info));
+ strlcpy(info->bus_info, pci_name(to_pci_dev(dev->dev.parent)),
+ sizeof(info->bus_info));
}
static int ioc3_get_link_ksettings(struct net_device *dev,
@@ -1646,7 +1287,16 @@ static void ioc3_set_multicast_list(struct net_device *dev)
spin_unlock_irq(&ip->ioc3_lock);
}
-module_pci_driver(ioc3_driver);
+static struct platform_driver ioc3eth_driver = {
+ .probe = ioc3eth_probe,
+ .remove = ioc3eth_remove,
+ .driver = {
+ .name = "ioc3-eth",
+ }
+};
+
+module_platform_driver(ioc3eth_driver);
+
MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
MODULE_DESCRIPTION("SGI IOC3 Ethernet driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-m48t35.c b/drivers/rtc/rtc-m48t35.c
index d3a75d447fce..e8194f1f01a8 100644
--- a/drivers/rtc/rtc-m48t35.c
+++ b/drivers/rtc/rtc-m48t35.c
@@ -20,6 +20,16 @@
struct m48t35_rtc {
u8 pad[0x7ff8]; /* starts at 0x7ff8 */
+#ifdef CONFIG_SGI_IP27
+ u8 hour;
+ u8 min;
+ u8 sec;
+ u8 control;
+ u8 year;
+ u8 month;
+ u8 date;
+ u8 day;
+#else
u8 control;
u8 sec;
u8 min;
@@ -28,6 +38,7 @@ struct m48t35_rtc {
u8 date;
u8 month;
u8 year;
+#endif
};
#define M48T35_RTC_SET 0x80
diff --git a/drivers/soc/lantiq/fpi-bus.c b/drivers/soc/lantiq/fpi-bus.c
index cb0303a0fe60..dff1375851cf 100644
--- a/drivers/soc/lantiq/fpi-bus.c
+++ b/drivers/soc/lantiq/fpi-bus.c
@@ -28,14 +28,12 @@ static int ltq_fpi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
- struct resource *res_xbar;
struct regmap *rcu_regmap;
void __iomem *xbar_membase;
u32 rcu_ahb_endianness_reg_offset;
int ret;
- res_xbar = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- xbar_membase = devm_ioremap_resource(dev, res_xbar);
+ xbar_membase = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(xbar_membase))
return PTR_ERR(xbar_membase);
diff --git a/drivers/tc/tc-driver.c b/drivers/tc/tc-driver.c
index 16b5bae63c74..d45f2c1ff341 100644
--- a/drivers/tc/tc-driver.c
+++ b/drivers/tc/tc-driver.c
@@ -56,8 +56,8 @@ EXPORT_SYMBOL(tc_unregister_driver);
* system is in its list of supported devices. Returns the matching
* tc_device_id structure or %NULL if there is no match.
*/
-const struct tc_device_id *tc_match_device(struct tc_driver *tdrv,
- struct tc_dev *tdev)
+static const struct tc_device_id *tc_match_device(struct tc_driver *tdrv,
+ struct tc_dev *tdev)
{
const struct tc_device_id *id = tdrv->id_table;
@@ -71,7 +71,6 @@ const struct tc_device_id *tc_match_device(struct tc_driver *tdrv,
}
return NULL;
}
-EXPORT_SYMBOL(tc_match_device);
/**
* tc_bus_match - Tell if a device structure has a matching
diff --git a/drivers/tty/serial/8250/8250_ioc3.c b/drivers/tty/serial/8250/8250_ioc3.c
new file mode 100644
index 000000000000..4c405f1b9c67
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_ioc3.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 8250 UART driver
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
+ *
+ * based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
+ * Copyright (C) 2014 Joshua Kinard <kumba@gentoo.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+#define IOC3_UARTCLK (22000000 / 3)
+
+struct ioc3_8250_data {
+ int line;
+};
+
+static unsigned int ioc3_serial_in(struct uart_port *p, int offset)
+{
+ return readb(p->membase + (offset ^ 3));
+}
+
+static void ioc3_serial_out(struct uart_port *p, int offset, int value)
+{
+ writeb(value, p->membase + (offset ^ 3));
+}
+
+static int serial8250_ioc3_probe(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data;
+ struct uart_8250_port up;
+ struct resource *r;
+ void __iomem *membase;
+ int irq, line;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ membase = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
+ if (!membase)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ irq = 0; /* no interrupt -> use polling */
+
+ /* Register serial ports with 8250.c */
+ memset(&up, 0, sizeof(struct uart_8250_port));
+ up.port.iotype = UPIO_MEM;
+ up.port.uartclk = IOC3_UARTCLK;
+ up.port.type = PORT_16550A;
+ up.port.irq = irq;
+ up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ);
+ up.port.dev = &pdev->dev;
+ up.port.membase = membase;
+ up.port.mapbase = r->start;
+ up.port.serial_in = ioc3_serial_in;
+ up.port.serial_out = ioc3_serial_out;
+ line = serial8250_register_8250_port(&up);
+ if (line < 0)
+ return line;
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+}
+
+static int serial8250_ioc3_remove(struct platform_device *pdev)
+{
+ struct ioc3_8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ return 0;
+}
+
+static struct platform_driver serial8250_ioc3_driver = {
+ .probe = serial8250_ioc3_probe,
+ .remove = serial8250_ioc3_remove,
+ .driver = {
+ .name = "ioc3-serial8250",
+ }
+};
+
+module_platform_driver(serial8250_ioc3_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
+MODULE_DESCRIPTION("SGI IOC3 8250 UART driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index ffd167e886ae..f16824bbb573 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -381,6 +381,17 @@ config SERIAL_8250_EM
port hardware found on the Emma Mobile line of processors.
If unsure, say N.
+config SERIAL_8250_IOC3
+ tristate "SGI IOC3 8250 UART support"
+ depends on SGI_MFD_IOC3 && SERIAL_8250
+ select SERIAL_8250_EXTENDED
+ select SERIAL_8250_SHARE_IRQ
+ help
+ Enable this if you have a SGI Origin or Octane machine. This module
+ provides basic serial support by directly driving the UART chip
+ behind the IOC3 device on those systems. Maximum baud speed is
+ 38400bps using this driver.
+
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 08c1d8117506..51a6079d3f1f 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
+obj-$(CONFIG_SERIAL_8250_IOC3) += 8250_ioc3.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o