summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/admin-guide/kdump/gdbmacros.txt159
-rw-r--r--Documentation/admin-guide/kdump/vmcoreinfo.rst131
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/base/core.c46
-rw-r--r--include/linux/crash_core.h3
-rw-r--r--include/linux/debug_locks.h2
-rw-r--r--include/linux/dev_printk.h8
-rw-r--r--include/linux/kernel.h1
-rw-r--r--include/linux/printk.h8
-rw-r--r--init/Kconfig3
-rw-r--r--kernel/printk/Makefile1
-rw-r--r--kernel/printk/internal.h4
-rw-r--r--kernel/printk/printk.c1153
-rw-r--r--kernel/printk/printk_ringbuffer.c2083
-rw-r--r--kernel/printk/printk_ringbuffer.h382
-rw-r--r--kernel/printk/printk_safe.c2
-rw-r--r--scripts/gdb/linux/dmesg.py147
-rw-r--r--scripts/gdb/linux/utils.py7
18 files changed, 3410 insertions, 731 deletions
diff --git a/Documentation/admin-guide/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt
index 220d0a80ca2c..82aecdcae8a6 100644
--- a/Documentation/admin-guide/kdump/gdbmacros.txt
+++ b/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -170,57 +170,103 @@ document trapinfo
address the kernel panicked.
end
-define dump_log_idx
- set $idx = $arg0
- if ($argc > 1)
- set $prev_flags = $arg1
+define dump_record
+ set var $desc = $arg0
+ set var $info = $arg1
+ if ($argc > 2)
+ set var $prev_flags = $arg2
else
- set $prev_flags = 0
+ set var $prev_flags = 0
end
- set $msg = ((struct printk_log *) (log_buf + $idx))
- set $prefix = 1
- set $newline = 1
- set $log = log_buf + $idx + sizeof(*$msg)
-
- # prev & LOG_CONT && !(msg->flags & LOG_PREIX)
- if (($prev_flags & 8) && !($msg->flags & 4))
- set $prefix = 0
+
+ set var $prefix = 1
+ set var $newline = 1
+
+ set var $begin = $desc->text_blk_lpos.begin % (1U << prb->text_data_ring.size_bits)
+ set var $next = $desc->text_blk_lpos.next % (1U << prb->text_data_ring.size_bits)
+
+ # handle data-less record
+ if ($begin & 1)
+ set var $text_len = 0
+ set var $log = ""
+ else
+ # handle wrapping data block
+ if ($begin > $next)
+ set var $begin = 0
+ end
+
+ # skip over descriptor id
+ set var $begin = $begin + sizeof(long)
+
+ # handle truncated message
+ if ($next - $begin < $info->text_len)
+ set var $text_len = $next - $begin
+ else
+ set var $text_len = $info->text_len
+ end
+
+ set var $log = &prb->text_data_ring.data[$begin]
+ end
+
+ # prev & LOG_CONT && !(info->flags & LOG_PREIX)
+ if (($prev_flags & 8) && !($info->flags & 4))
+ set var $prefix = 0
end
- # msg->flags & LOG_CONT
- if ($msg->flags & 8)
+ # info->flags & LOG_CONT
+ if ($info->flags & 8)
# (prev & LOG_CONT && !(prev & LOG_NEWLINE))
if (($prev_flags & 8) && !($prev_flags & 2))
- set $prefix = 0
+ set var $prefix = 0
end
- # (!(msg->flags & LOG_NEWLINE))
- if (!($msg->flags & 2))
- set $newline = 0
+ # (!(info->flags & LOG_NEWLINE))
+ if (!($info->flags & 2))
+ set var $newline = 0
end
end
if ($prefix)
- printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000
+ printf "[%5lu.%06lu] ", $info->ts_nsec / 1000000000, $info->ts_nsec % 1000000000
end
- if ($msg->text_len != 0)
- eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len
+ if ($text_len)
+ eval "printf \"%%%d.%ds\", $log", $text_len, $text_len
end
if ($newline)
printf "\n"
end
- if ($msg->dict_len > 0)
- set $dict = $log + $msg->text_len
- set $idx = 0
- set $line = 1
- while ($idx < $msg->dict_len)
- if ($line)
- printf " "
- set $line = 0
+
+ # handle dictionary data
+
+ set var $dict = &$info->dev_info.subsystem[0]
+ set var $dict_len = sizeof($info->dev_info.subsystem)
+ if ($dict[0] != '\0')
+ printf " SUBSYSTEM="
+ set var $idx = 0
+ while ($idx < $dict_len)
+ set var $c = $dict[$idx]
+ if ($c == '\0')
+ loop_break
+ else
+ if ($c < ' ' || $c >= 127 || $c == '\\')
+ printf "\\x%02x", $c
+ else
+ printf "%c", $c
+ end
end
- set $c = $dict[$idx]
+ set var $idx = $idx + 1
+ end
+ printf "\n"
+ end
+
+ set var $dict = &$info->dev_info.device[0]
+ set var $dict_len = sizeof($info->dev_info.device)
+ if ($dict[0] != '\0')
+ printf " DEVICE="
+ set var $idx = 0
+ while ($idx < $dict_len)
+ set var $c = $dict[$idx]
if ($c == '\0')
- printf "\n"
- set $line = 1
+ loop_break
else
if ($c < ' ' || $c >= 127 || $c == '\\')
printf "\\x%02x", $c
@@ -228,33 +274,46 @@ define dump_log_idx
printf "%c", $c
end
end
- set $idx = $idx + 1
+ set var $idx = $idx + 1
end
printf "\n"
end
end
-document dump_log_idx
- Dump a single log given its index in the log buffer. The first
- parameter is the index into log_buf, the second is optional and
- specified the previous log buffer's flags, used for properly
- formatting continued lines.
+document dump_record
+ Dump a single record. The first parameter is the descriptor,
+ the second parameter is the info, the third parameter is
+ optional and specifies the previous record's flags, used for
+ properly formatting continued lines.
end
define dmesg
- set $i = log_first_idx
- set $end_idx = log_first_idx
- set $prev_flags = 0
+ # definitions from kernel/printk/printk_ringbuffer.h
+ set var $desc_committed = 1
+ set var $desc_finalized = 2
+ set var $desc_sv_bits = sizeof(long) * 8
+ set var $desc_flags_shift = $desc_sv_bits - 2
+ set var $desc_flags_mask = 3 << $desc_flags_shift
+ set var $id_mask = ~$desc_flags_mask
+
+ set var $desc_count = 1U << prb->desc_ring.count_bits
+ set var $prev_flags = 0
+
+ set var $id = prb->desc_ring.tail_id.counter
+ set var $end_id = prb->desc_ring.head_id.counter
while (1)
- set $msg = ((struct printk_log *) (log_buf + $i))
- if ($msg->len == 0)
- set $i = 0
- else
- dump_log_idx $i $prev_flags
- set $i = $i + $msg->len
- set $prev_flags = $msg->flags
+ set var $desc = &prb->desc_ring.descs[$id % $desc_count]
+ set var $info = &prb->desc_ring.infos[$id % $desc_count]
+
+ # skip non-committed record
+ set var $state = 3 & ($desc->state_var.counter >> $desc_flags_shift)
+ if ($state == $desc_committed || $state == $desc_finalized)
+ dump_record $desc $info $prev_flags
+ set var $prev_flags = $info->flags
end
- if ($i == $end_idx)
+
+ set var $id = ($id + 1) & $id_mask
+ if ($id == $end_id)
loop_break
end
end
diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 2baad0bfb09d..e44a6c01f336 100644
--- a/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -189,50 +189,123 @@ from this.
Free areas descriptor. User-space tools use this value to iterate the
free_area ranges. MAX_ORDER is used by the zone buddy allocator.
-log_first_idx
+prb
+---
+
+A pointer to the printk ringbuffer (struct printk_ringbuffer). This
+may be pointing to the static boot ringbuffer or the dynamically
+allocated ringbuffer, depending on when the the core dump occurred.
+Used by user-space tools to read the active kernel log buffer.
+
+printk_rb_static
+----------------
+
+A pointer to the static boot printk ringbuffer. If @prb has a
+different value, this is useful for viewing the initial boot messages,
+which may have been overwritten in the dynamically allocated
+ringbuffer.
+
+clear_seq
+---------
+
+The sequence number of the printk() record after the last clear
+command. It indicates the first record after the last
+SYSLOG_ACTION_CLEAR, like issued by 'dmesg -c'. Used by user-space
+tools to dump a subset of the dmesg log.
+
+printk_ringbuffer
+-----------------
+
+The size of a printk_ringbuffer structure. This structure contains all
+information required for accessing the various components of the
+kernel log buffer.
+
+(printk_ringbuffer, desc_ring|text_data_ring|dict_data_ring|fail)
+-----------------------------------------------------------------
+
+Offsets for the various components of the printk ringbuffer. Used by
+user-space tools to view the kernel log buffer without requiring the
+declaration of the structure.
+
+prb_desc_ring
-------------
-Index of the first record stored in the buffer log_buf. Used by
-user-space tools to read the strings in the log_buf.
+The size of the prb_desc_ring structure. This structure contains
+information about the set of record descriptors.
-log_buf
--------
+(prb_desc_ring, count_bits|descs|head_id|tail_id)
+-------------------------------------------------
+
+Offsets for the fields describing the set of record descriptors. Used
+by user-space tools to be able to traverse the descriptors without
+requiring the declaration of the structure.
+
+prb_desc
+--------
+
+The size of the prb_desc structure. This structure contains
+information about a single record descriptor.
+
+(prb_desc, info|state_var|text_blk_lpos|dict_blk_lpos)
+------------------------------------------------------
+
+Offsets for the fields describing a record descriptors. Used by
+user-space tools to be able to read descriptors without requiring
+the declaration of the structure.
+
+prb_data_blk_lpos
+-----------------
+
+The size of the prb_data_blk_lpos structure. This structure contains
+information about where the text or dictionary data (data block) is
+located within the respective data ring.
+
+(prb_data_blk_lpos, begin|next)
+-------------------------------
-Console output is written to the ring buffer log_buf at index
-log_first_idx. Used to get the kernel log.
+Offsets for the fields describing the location of a data block. Used
+by user-space tools to be able to locate data blocks without
+requiring the declaration of the structure.
-log_buf_len
+printk_info
-----------
-log_buf's length.
+The size of the printk_info structure. This structure contains all
+the meta-data for a record.
-clear_idx
----------
+(printk_info, seq|ts_nsec|text_len|dict_len|caller_id)
+------------------------------------------------------
-The index that the next printk() record to read after the last clear
-command. It indicates the first record after the last SYSLOG_ACTION
-_CLEAR, like issued by 'dmesg -c'. Used by user-space tools to dump
-the dmesg log.
+Offsets for the fields providing the meta-data for a record. Used by
+user-space tools to be able to read the information without requiring
+the declaration of the structure.
-log_next_idx
-------------
+prb_data_ring
+-------------
-The index of the next record to store in the buffer log_buf. Used to
-compute the index of the current buffer position.
+The size of the prb_data_ring structure. This structure contains
+information about a set of data blocks.
-printk_log
-----------
+(prb_data_ring, size_bits|data|head_lpos|tail_lpos)
+---------------------------------------------------
-The size of a structure printk_log. Used to compute the size of
-messages, and extract dmesg log. It encapsulates header information for
-log_buf, such as timestamp, syslog level, etc.
+Offsets for the fields describing a set of data blocks. Used by
+user-space tools to be able to access the data blocks without
+requiring the declaration of the structure.
-(printk_log, ts_nsec|len|text_len|dict_len)
--------------------------------------------
+atomic_long_t
+-------------
+
+The size of the atomic_long_t structure. Used by user-space tools to
+be able to copy the full structure, regardless of its
+architecture-specific implementation.
+
+(atomic_long_t, counter)
+------------------------
-It represents field offsets in struct printk_log. User space tools
-parse it and check whether the values of printk_log's members have been
-changed.
+Offset for the long value of an atomic_long_t variable. Used by
+user-space tools to access the long value without requiring the
+architecture-specific declaration.
(free_area.free_list, MIGRATE_TYPES)
------------------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 71291bb26a07..6da16c3707c6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13970,6 +13970,7 @@ PRINTK
M: Petr Mladek <pmladek@suse.com>
M: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
R: Steven Rostedt <rostedt@goodmis.org>
+R: John Ogness <john.ogness@linutronix.de>
S: Maintained
F: include/linux/printk.h
F: kernel/printk/
diff --git a/drivers/base/core.c b/drivers/base/core.c
index bb5806a2bd4c..f90e9f77bf8c 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -4061,22 +4061,21 @@ void device_shutdown(void)
*/
#ifdef CONFIG_PRINTK
-static int
-create_syslog_header(const struct device *dev, char *hdr, size_t hdrlen)
+static void
+set_dev_info(const struct device *dev, struct dev_printk_info *dev_info)
{
const char *subsys;
- size_t pos = 0;
+
+ memset(dev_info, 0, sizeof(*dev_info));
if (dev->class)
subsys = dev->class->name;
else if (dev->bus)
subsys = dev->bus->name;
else
- return 0;
+ return;
- pos += snprintf(hdr + pos, hdrlen - pos, "SUBSYSTEM=%s", subsys);
- if (pos >= hdrlen)
- goto overflow;
+ strscpy(dev_info->subsystem, subsys, sizeof(dev_info->subsystem));
/*
* Add device identifier DEVICE=:
@@ -4092,41 +4091,28 @@ create_syslog_header(const struct device *dev, char *hdr, size_t hdrlen)
c = 'b';
else
c = 'c';
- pos++;
- pos += snprintf(hdr + pos, hdrlen - pos,
- "DEVICE=%c%u:%u",
- c, MAJOR(dev->devt), MINOR(dev->devt));
+
+ snprintf(dev_info->device, sizeof(dev_info->device),
+ "%c%u:%u", c, MAJOR(dev->devt), MINOR(dev->devt));
} else if (strcmp(subsys, "net") == 0) {
struct net_device *net = to_net_dev(dev);
- pos++;
- pos += snprintf(hdr + pos, hdrlen - pos,
- "DEVICE=n%u", net->ifindex);
+ snprintf(dev_info->device, sizeof(dev_info->device),
+ "n%u", net->ifindex);
} else {
- pos++;
- pos += snprintf(hdr + pos, hdrlen - pos,
- "DEVICE=+%s:%s", subsys, dev_name(dev));
+ snprintf(dev_info->device, sizeof(dev_info->device),
+ "+%s:%s", subsys, dev_name(dev));
}
-
- if (pos >= hdrlen)
- goto overflow;
-
- return pos;
-
-overflow:
- dev_WARN(dev, "device/subsystem name too long");
- return 0;
}
int dev_vprintk_emit(int level, const struct device *dev,
const char *fmt, va_list args)
{
- char hdr[128];
- size_t hdrlen;
+ struct dev_printk_info dev_info;
- hdrlen = create_syslog_header(dev, hdr, sizeof(hdr));
+ set_dev_info(dev, &dev_info);
- return vprintk_emit(0, level, hdrlen ? hdr : NULL, hdrlen, fmt, args);
+ return vprintk_emit(0, level, &dev_info, fmt, args);
}
EXPORT_SYMBOL(dev_vprintk_emit);
diff --git a/include/linux/crash_core.h b/include/linux/crash_core.h
index 6594dbc34a37..206bde8308b2 100644
--- a/include/linux/crash_core.h
+++ b/include/linux/crash_core.h
@@ -55,6 +55,9 @@ phys_addr_t paddr_vmcoreinfo_note(void);
#define VMCOREINFO_OFFSET(name, field) \
vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
(unsigned long)offsetof(struct name, field))
+#define VMCOREINFO_TYPE_OFFSET(name, field) \
+ vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
+ (unsigned long)offsetof(name, field))
#define VMCOREINFO_LENGTH(name, value) \
vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value)
#define VMCOREINFO_NUMBER(name) \
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index e7e45f0cc7da..2915f56ad421 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -2,9 +2,9 @@
#ifndef __LINUX_DEBUG_LOCKING_H
#define __LINUX_DEBUG_LOCKING_H
-#include <linux/kernel.h>
#include <linux/atomic.h>
#include <linux/bug.h>
+#include <linux/printk.h>
struct task_struct;
diff --git a/include/linux/dev_printk.h b/include/linux/dev_printk.h
index 3028b644b4fb..6f009559ee54 100644
--- a/include/linux/dev_printk.h
+++ b/include/linux/dev_printk.h
@@ -21,6 +21,14 @@
struct device;
+#define PRINTK_INFO_SUBSYSTEM_LEN 16
+#define PRINTK_INFO_DEVICE_LEN 48
+
+struct dev_printk_info {
+ char subsystem[PRINTK_INFO_SUBSYSTEM_LEN];
+ char device[PRINTK_INFO_DEVICE_LEN];
+};
+
#ifdef CONFIG_PRINTK
__printf(3, 0) __cold
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index c25b8e41c0ea..e4aa29b1ad62 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -526,7 +526,6 @@ extern unsigned int sysctl_oops_all_cpu_backtrace;
#endif /* CONFIG_SMP */
extern void bust_spinlocks(int yes);
-extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
extern int panic_timeout;
extern unsigned long panic_print;
extern int panic_on_oops;
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 34c1a7be3e01..78479633ccfc 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -12,6 +12,8 @@
extern const char linux_banner[];
extern const char linux_proc_banner[];
+extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */
+
#define PRINTK_MAX_SINGLE_HEADER_LEN 2
static inline int printk_get_level(const char *buffer)
@@ -159,10 +161,12 @@ static inline void printk_nmi_direct_enter(void) { }
static inline void printk_nmi_direct_exit(void) { }
#endif /* PRINTK_NMI */
+struct dev_printk_info;
+
#ifdef CONFIG_PRINTK
-asmlinkage __printf(5, 0)
+asmlinkage __printf(4, 0)
int vprintk_emit(int facility, int level,
- const char *dict, size_t dictlen,
+ const struct dev_printk_info *dev_info,
const char *fmt, va_list args);
asmlinkage __printf(1, 0)
diff --git a/init/Kconfig b/init/Kconfig
index c0f56e455dce..2a583ef2ff66 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -682,7 +682,8 @@ config IKHEADERS
config LOG_BUF_SHIFT
int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
- range 12 25
+ range 12 25 if !H8300
+ range 12 19 if H8300
default 17
depends on PRINTK
help
diff --git a/kernel/printk/Makefile b/kernel/printk/Makefile
index 4d052fc6bcde..eee3dc9b60a9 100644
--- a/kernel/printk/Makefile
+++ b/kernel/printk/Makefile
@@ -2,3 +2,4 @@
obj-y = printk.o
obj-$(CONFIG_PRINTK) += printk_safe.o
obj-$(CONFIG_A11Y_BRAILLE_CONSOLE) += braille.o
+obj-$(CONFIG_PRINTK) += printk_ringbuffer.o
diff --git a/kernel/printk/internal.h b/kernel/printk/internal.h
index 660f9a6bf73a..3a8fd491758c 100644
--- a/kernel/printk/internal.h
+++ b/kernel/printk/internal.h
@@ -14,9 +14,9 @@
extern raw_spinlock_t logbuf_lock;
-__printf(5, 0)
+__printf(4, 0)
int vprintk_store(int facility, int level,
- const char *dict, size_t dictlen,
+ const struct dev_printk_info *dev_info,
const char *fmt, va_list args);
__printf(1, 0) int vprintk_default(const char *fmt, va_list args);
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 9b75f6bfc333..fe64a49344bf 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -55,6 +55,7 @@
#define CREATE_TRACE_POINTS
#include <trace/events/printk.h>
+#include "printk_ringbuffer.h"
#include "console_cmdline.h"
#include "braille.h"
#include "internal.h"
@@ -294,30 +295,22 @@ enum con_msg_format_flags {
static int console_msg_format = MSG_FORMAT_DEFAULT;
/*
- * The printk log buffer consists of a chain of concatenated variable
- * length records. Every record starts with a record header, containing
- * the overall length of the record.
+ * The printk log buffer consists of a sequenced collection of records, each
+ * containing variable length message text. Every record also contains its
+ * own meta-data (@info).
*
- * The heads to the first and last entry in the buffer, as well as the
- * sequence numbers of these entries are maintained when messages are
- * stored.
+ * Every record meta-data carries the timestamp in microseconds, as well as
+ * the standard userspace syslog level and syslog facility. The usual kernel
+ * messages use LOG_KERN; userspace-injected messages always carry a matching
+ * syslog facility, by default LOG_USER. The origin of every message can be
+ * reliably determined that way.
*
- * If the heads indicate available messages, the length in the header
- * tells the start next message. A length == 0 for the next message
- * indicates a wrap-around to the beginning of the buffer.
+ * The human readable log message of a record is available in @text, the
+ * length of the message text in @text_len. The stored message is not
+ * terminated.
*
- * Every record carries the monotonic timestamp in microseconds, as well as
- * the standard userspace syslog level and syslog facility. The usual
- * kernel messages use LOG_KERN; userspace-injected messages always carry
- * a matching syslog facility, by default LOG_USER. The origin of every
- * message can be reliably determined that way.
- *
- * The human readable log message directly follows the message header. The
- * length of the message text is stored in the header, the stored message
- * is not terminated.
- *
- * Optionally, a message can carry a dictionary of properties (key/value pairs),
- * to provide userspace with a machine-readable message context.
+ * Optionally, a record can carry a dictionary of properties (key/value
+ * pairs), to provide userspace with a machine-readable message context.
*
* Examples for well-defined, commonly used property names are:
* DEVICE=b12:8 device identifier
@@ -327,25 +320,22 @@ static int console_msg_format = MSG_FORMAT_DEFAULT;
* +sound:card0 subsystem:devname
* SUBSYSTEM=pci driver-core subsystem name
*
- * Valid characters in property names are [a-zA-Z0-9.-_]. The plain text value
- * follows directly after a '=' character. Every property is terminated by
- * a '\0' character. The last property is not terminated.
- *
- * Example of a message structure:
- * 0000 ff 8f 00 00 00 00 00 00 monotonic time in nsec
- * 0008 34 00 record is 52 bytes long
- * 000a 0b 00 text is 11 bytes long
- * 000c 1f 00 dictionary is 23 bytes long
- * 000e 03 00 LOG_KERN (facility) LOG_ERR (level)
- * 0010 69 74 27 73 20 61 20 6c "it's a l"
- * 69 6e 65 "ine"
- * 001b 44 45 56 49 43 "DEVIC"
- * 45 3d 62 38 3a 32 00 44 "E=b8:2\0D"
- * 52 49 56 45 52 3d 62 75 "RIVER=bu"
- * 67 "g"
- * 0032 00 00 00 padding to next message header
- *
- * The 'struct printk_log' buffer header must never be directly exported to
+ * Valid characters in property names are [a-zA-Z0-9.-_]. Property names
+ * and values are terminated by a '\0' character.
+ *
+ * Example of record values:
+ * record.text_buf = "it's a line" (unterminated)
+ * record.info.seq = 56
+ * record.info.ts_nsec = 36863
+ * record.info.text_len = 11
+ * record.info.facility = 0 (LOG_KERN)
+ * record.info.flags = 0
+ * record.info.level = 3 (LOG_ERR)
+ * record.info.caller_id = 299 (task 299)
+ * record.info.dev_info.subsystem = "pci" (terminated)
+ * record.info.dev_info.device = "+pci:0000:00:01.0" (terminated)
+ *
+ * The 'struct printk_info' buffer must never be directly exported to
* userspace, it is a kernel-private implementation detail that might
* need to be changed in the future, when the requirements change.
*
@@ -365,23 +355,6 @@ enum log_flags {
LOG_CONT = 8, /* text is a fragment of a continuation line */
};
-struct printk_log {
- u64 ts_nsec; /* timestamp in nanoseconds */
- u16 len; /* length of entire record */
- u16 text_len; /* length of text buffer */
- u16 dict_len; /* length of dictionary buffer */
- u8 facility; /* syslog facility */
- u8 flags:5; /* internal record flags */
- u8 level:3; /* syslog level */
-#ifdef CONFIG_PRINTK_CALLER
- u32 caller_id; /* thread id or processor id */
-#endif
-}
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-__packed __aligned(4)
-#endif
-;
-
/*
* The logbuf_lock protects kmsg buffer, indices, counters. This can be taken
* within the scheduler's rq lock. It must be released before calling
@@ -421,26 +394,16 @@ DEFINE_RAW_SPINLOCK(logbuf_lock);
DECLARE_WAIT_QUEUE_HEAD(log_wait);
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
-static u32 syslog_idx;
static size_t syslog_partial;
static bool syslog_time;
-/* index and sequence number of the first record stored in the buffer */
-static u64 log_first_seq;
-static u32 log_first_idx;
-
-/* index and sequence number of the next record to store in the buffer */
-static u64 log_next_seq;
-static u32 log_next_idx;
-
/* the next printk record to write to the console */
static u64 console_seq;
-static u32 console_idx;
static u64 exclusive_console_stop_seq;
+static unsigned long console_dropped;
/* the next printk record to read after the last 'clear' command */
static u64 clear_seq;
-static u32 clear_idx;
#ifdef CONFIG_PRINTK_CALLER
#define PREFIX_MAX 48
@@ -453,7 +416,7 @@ static u32 clear_idx;
#define LOG_FACILITY(v) ((v) >> 3 & 0xff)
/* record buffer */
-#define LOG_ALIGN __alignof__(struct printk_log)
+#define LOG_ALIGN __alignof__(unsigned long)
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
#define LOG_BUF_LEN_MAX (u32)(1 << 31)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
@@ -461,6 +424,23 @@ static char *log_buf = __log_buf;
static u32 log_buf_len = __LOG_BUF_LEN;
/*
+ * Define the average message size. This only affects the number of
+ * descriptors that will be available. Underestimating is better than
+ * overestimating (too many available descriptors is better than not enough).
+ */
+#define PRB_AVGBITS 5 /* 32 character average length */
+
+#if CONFIG_LOG_BUF_SHIFT <= PRB_AVGBITS
+#error CONFIG_LOG_BUF_SHIFT value too small.
+#endif
+_DEFINE_PRINTKRB(printk_rb_static, CONFIG_LOG_BUF_SHIFT - PRB_AVGBITS,
+ PRB_AVGBITS, &__log_buf[0]);
+
+static struct printk_ringbuffer printk_rb_dynamic;
+
+static struct printk_ringbuffer *prb = &printk_rb_static;
+
+/*
* We cannot access per-CPU data (e.g. per-CPU flush irq_work) before
* per_cpu_areas are initialised. This variable is set to true when
* it's safe to access per-CPU data.
@@ -484,108 +464,6 @@ u32 log_buf_len_get(void)
return log_buf_len;
}
-/* human readable text of the record */
-static char *log_text(const struct printk_log *msg)
-{
- return (char *)msg + sizeof(struct printk_log);
-}
-
-/* optional key/value pair dictionary attached to the record */
-static char *log_dict(const struct printk_log *msg)
-{
- return (char *)msg + sizeof(struct printk_log) + msg->text_len;
-}
-
-/* get record by index; idx must point to valid msg */
-static struct printk_log *log_from_idx(u32 idx)
-{
- struct printk_log *msg = (struct printk_log *)(log_buf + idx);
-
- /*
- * A length == 0 record is the end of buffer marker. Wrap around and
- * read the message at the start of the buffer.
- */
- if (!msg->len)
- return (struct printk_log *)log_buf;
- return msg;
-}
-
-/* get next record; idx must point to valid msg */
-static u32 log_next(u32 idx)
-{
- struct printk_log *msg = (struct printk_log *)(log_buf + idx);
-
- /* length == 0 indicates the end of the buffer; wrap */
- /*
- * A length == 0 record is the end of buffer marker. Wrap around and
- * read the message at the start of the buffer as *this* one, and
- * return the one after that.
- */
- if (!msg->len) {
- msg = (struct printk_log *)log_buf;
- return msg->len;
- }
- return idx + msg->len;
-}
-
-/*
- * Check whether there is enough free space for the given message.
- *
- * The same values of first_idx and next_idx mean that the buffer
- * is either empty or full.
- *
- * If the buffer is empty, we must respect the position of the indexes.
- * They cannot be reset to the beginning of the buffer.
- */
-static int logbuf_has_space(u32 msg_size, bool empty)
-{
- u32 free;
-
- if (log_next_idx > log_first_idx || empty)
- free = max(log_buf_len - log_next_idx, log_first_idx);
- else
- free = log_first_idx - log_next_idx;
-
- /*
- * We need space also for an empty header that signalizes wrapping
- * of the buffer.
- */
- return free >= msg_size + sizeof(struct printk_log);
-}
-
-static int log_make_free_space(u32 msg_size)
-{
- while (log_first_seq < log_next_seq &&
- !logbuf_has_space(msg_size, false)) {
- /* drop old messages until we have enough contiguous space */
- log_first_idx = log_next(log_first_idx);
- log_first_seq++;
- }
-
- if (clear_seq < log_first_seq) {
- clear_seq = log_first_seq;
- clear_idx = log_first_idx;
- }
-
- /* sequence numbers are equal, so the log buffer is empty */
- if (logbuf_has_space(msg_size, log_first_seq == log_next_seq))
- return 0;
-
- return -ENOMEM;
-}
-
-/* compute the message size including the padding bytes */
-static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len)
-{
- u32 size;
-
- size = sizeof(struct printk_log) + text_len + dict_len;
- *pad_len = (-size) & (LOG_ALIGN - 1);
- size += *pad_len;
-
- return size;
-}
-
/*
* Define how much of the log buffer we could take at maximum. The value
* must be greater than two. Note that only half of the buffer is available
@@ -594,84 +472,69 @@ static u32 msg_used_size(u16 text_len, u16 dict_len, u32 *pad_len)
#define MAX_LOG_TAKE_PART 4
static const char trunc_msg[] = "<truncated>";
-static u32 truncate_msg(u16 *text_len, u16 *trunc_msg_len,
- u16 *dict_len, u32 *pad_len)
+static void truncate_msg(u16 *text_len, u16 *trunc_msg_len)
{
/*
* The message should not take the whole buffer. Otherwise, it might
* get removed too soon.
*/
u32 max_text_len = log_buf_len / MAX_LOG_TAKE_PART;
+
if (*text_len > max_text_len)
*text_len = max_text_len;
- /* enable the warning message */
+
+ /* enable the warning message (if there is room) */
*trunc_msg_len = strlen(trunc_msg);
- /* disable the "dict" completely */
- *dict_len = 0;
- /* compute the size again, count also the warning message */
- return msg_used_size(*text_len + *trunc_msg_len, 0, pad_len);
+ if (*text_len >= *trunc_msg_len)
+ *text_len -= *trunc_msg_len;
+ else
+ *trunc_msg_len = 0;
}
/* insert record into the buffer, discard old ones, update heads */
static int log_store(u32 caller_id, int facility, int level,
enum log_flags flags, u64 ts_nsec,
- const char *dict, u16 dict_len,
+ const struct dev_printk_info *dev_info,
const char *text, u16 text_len)
{
- struct printk_log *msg;
- u32 size, pad_len;
+ struct prb_reserved_entry e;
+ struct printk_record r;
u16 trunc_msg_len = 0;
- /* number of '\0' padding bytes to next message */
- size = msg_used_size(text_len, dict_len, &pad_len);
+ prb_rec_init_wr(&r, text_len);
- if (log_make_free_space(size)) {
+ if (!prb_reserve(&e, prb, &r)) {
/* truncate the message if it is too long for empty buffer */
- size = truncate_msg(&text_len, &trunc_msg_len,
- &dict_len, &pad_len);
+ truncate_msg(&text_len, &trunc_msg_len);
+ prb_rec_init_wr(&r, text_len + trunc_msg_len);
/* survive when the log buffer is too small for trunc_msg */
- if (log_make_free_space(size))
+ if (!prb_reserve(&e, prb, &r))
return 0;
}
- if (log_next_idx + size + sizeof(struct printk_log) > log_buf_len) {
- /*
- * This message + an additional empty header does not fit
- * at the end of the buffer. Add an empty header with len == 0
- * to signify a wrap around.
- */
- memset(log_buf + log_next_idx, 0, sizeof(struct printk_log));
- log_next_idx = 0;
- }
-
/* fill message */
- msg = (struct printk_log *)(log_buf + log_next_idx);
- memcpy(log_text(msg), text, text_len);
- msg->text_len = text_len;
- if (trunc_msg_len) {
- memcpy(log_text(msg) + text_len, trunc_msg, trunc_msg_len);
- msg->text_len += trunc_msg_len;
- }
- memcpy(log_dict(msg), dict, dict_len);
- msg->dict_len = dict_len;
- msg->facility = facility;
- msg->level = level & 7;
- msg->flags = flags & 0x1f;
+ memcpy(&r.text_buf[0], text, text_len);
+ if (trunc_msg_len)
+ memcpy(&r.text_buf[text_len], trunc_msg, trunc_msg_len);
+ r.info->text_len = text_len + trunc_msg_len;
+ r.info->facility = facility;
+ r.info->level = level & 7;
+ r.info->flags = flags & 0x1f;
if (ts_nsec > 0)
- msg->ts_nsec = ts_nsec;
+ r.info->ts_nsec = ts_nsec;
else
- msg->ts_nsec = local_clock();
-#ifdef CONFIG_PRINTK_CALLER
- msg->caller_id = caller_id;
-#endif
- memset(log_dict(msg) + dict_len, 0, pad_len);
- msg->len = size;
+ r.info->ts_nsec = local_clock();
+ r.info->caller_id = caller_id;
+ if (dev_info)
+ memcpy(&r.info->dev_info, dev_info, sizeof(r.info->dev_info));
/* insert message */
- log_next_idx += msg->len;
- log_next_seq++;
+ if ((flags & LOG_CONT) || !(flags & LOG_NEWLINE))
+ prb_commit(&e);
+ else
+ prb_final_commit(&e);
- return msg->text_len;
+ return (text_len + trunc_msg_len);
}
int dmesg_restrict = IS_ENABLED(CONFIG_SECURITY_DMESG_RESTRICT);
@@ -723,13 +586,13 @@ static void append_char(char **pp, char *e, char c)
*(*pp)++ = c;
}
-static ssize_t msg_print_ext_header(char *buf, size_t size,
- struct printk_log *msg, u64 seq)
+static ssize_t info_print_ext_header(char *buf, size_t size,
+ struct printk_info *info)
{
- u64 ts_usec = msg->ts_nsec;
+ u64 ts_usec = info->ts_nsec;
char caller[20];
#ifdef CONFIG_PRINTK_CALLER
- u32 id = msg->caller_id;
+ u32 id = info->caller_id;
snprintf(caller, sizeof(caller), ",caller=%c%u",
id & 0x80000000 ? 'C' : 'T', id & ~0x80000000);
@@ -740,13 +603,13 @@ static ssize_t msg_print_ext_header(char *buf, size_t size,
do_div(ts_usec, 1000);
return scnprintf(buf, size, "%u,%llu,%llu,%c%s;",
- (msg->facility << 3) | msg->level, seq, ts_usec,
- msg->flags & LOG_CONT ? 'c' : '-', caller);
+ (info->facility << 3) | info->level, info->seq,
+ ts_usec, info->flags & LOG_CONT ? 'c' : '-', caller);
}
-static ssize_t msg_print_ext_body(char *buf, size_t size,
- char *dict, size_t dict_len,
- char *text, size_t text_len)
+static ssize_t msg_add_ext_text(char *buf, size_t size,
+ const char *text, size_t text_len,
+ unsigned char endc)
{
char *p = buf, *e = buf + size;
size_t i;
@@ -760,45 +623,56 @@ static ssize_t msg_print_ext_body(char *buf, size_t size,
else
append_char(&p, e, c);
}
- append_char(&p, e, '\n');
+ append_char(&p, e, endc);
- if (dict_len) {
- bool line = true;
+ return p - buf;
+}
- for (i = 0; i < dict_len; i++) {
- unsigned char c = dict[i];
+static ssize_t msg_add_dict_text(char *buf, size_t size,
+ const char *key, const char *val)
+{
+ size_t val_len = strlen(val);
+ ssize_t len;
- if (line) {
- append_char(&p, e, ' ');
- line = false;
- }
+ if (!val_len)
+ return 0;
- if (c == '\0') {
- append_char(&p, e, '\n');
- line = true;
- continue;
- }
+ len = msg_add_ext_text(buf, size, "", 0, ' '); /* dict prefix */
+ len += msg_add_ext_text(buf + len, size - len, key, strlen(key), '=');
+ len += msg_add_ext_text(buf + len, size - len, val, val_len, '\n');
- if (c < ' ' || c >= 127 || c == '\\') {
- p += scnprintf(p, e - p, "\\x%02x", c);
- continue;
- }
+ return len;
+}
- append_char(&p, e, c);
- }
- append_char(&p, e, '\n');
- }
+static ssize_t msg_print_ext_body(char *buf, size_t size,
+ char *text, size_t text_len,
+ struct dev_printk_info *dev_info)
+{
+ ssize_t len;
- return p - buf;
+ len = msg_add_ext_text(buf, size, text, text_len, '\n');
+
+ if (!dev_info)
+ goto out;
+
+ len += msg_add_dict_text(buf + len, size - len, "SUBSYSTEM",
+ dev_info->subsystem);
+ len += msg_add_dict_text(buf + len, size - len, "DEVICE",
+ dev_info->device);
+out:
+ return len;
}
/* /dev/kmsg - userspace message inject/listen interface */
struct devkmsg_user {
u64 seq;
- u32 idx;
struct ratelimit_state rs;
struct mutex lock;
char buf[CONSOLE_EXT_LOG_MAX];
+
+ struct printk_info info;
+ char text_buf[CONSOLE_EXT_LOG_MAX];
+ struct printk_record record;
};
static __printf(3, 4) __cold
@@ -808,7 +682,7 @@ int devkmsg_emit(int facility, int level, const char *fmt, ...)
int r;
va_start(args, fmt);
- r = vprintk_emit(facility, level, NULL, 0, fmt, args);
+ r = vprintk_emit(facility, level, NULL, fmt, args);
va_end(args);
return r;
@@ -881,7 +755,7 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct devkmsg_user *user = file->private_data;
- struct printk_log *msg;
+ struct printk_record *r = &user->record;
size_t len;
ssize_t ret;
@@ -893,7 +767,7 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
return ret;
logbuf_lock_irq();
- while (user->seq == log_next_seq) {
+ if (!prb_read_valid(prb, user->seq, r)) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
logbuf_unlock_irq();
@@ -902,30 +776,26 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf,
logbuf_unlock_irq();
ret = wait_event_interruptible(log_wait,
- user->seq != log_next_seq);
+ prb_read_valid(prb, user->seq, r));
if (ret)
goto out;
logbuf_lock_irq();
}
- if (user->seq < log_first_seq) {
+ if (user->seq < prb_first_valid_seq(prb)) {
/* our last seen message is gone, return error and reset */
- user->idx = log_first_idx;
- user->seq = log_first_seq;
+ user->seq = prb_first_valid_seq(prb);
ret = -EPIPE;
logbuf_unlock_irq();
goto out;
}
- msg = log_from_idx(user->idx);
- len = msg_print_ext_header(user->buf, sizeof(user->buf),
- msg, user->seq);
+ len = info_print_ext_header(user->buf, sizeof(user->buf), r->info);
len += msg_print_ext_body(user->buf + len, sizeof(user->buf) - len,
- log_dict(msg), msg->dict_len,
- log_text(msg), msg->text_len);
+ &r->text_buf[0], r->info->text_len,
+ &r->info->dev_info);
- user->idx = log_next(user->idx);
- user->seq++;
+ user->seq = r->info->seq + 1;
logbuf_unlock_irq();
if (len > count) {
@@ -965,8 +835,7 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence)
switch (whence) {
case SEEK_SET:
/* the first record */
- user->idx = log_first_idx;
- user->seq = log_first_seq;
+ user->seq = prb_first_valid_seq(prb);
break;
case SEEK_DATA:
/*
@@ -974,13 +843,11 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence)
* like issued by 'dmesg -c'. Reading /dev/kmsg itself
* changes no global state, and does not clear anything.
*/
- user->idx = clear_idx;
user->seq = clear_seq;
break;
case SEEK_END:
/* after the last record */
- user->idx = log_next_idx;
- user->seq = log_next_seq;
+ user->seq = prb_next_seq(prb);
break;
default:
ret = -EINVAL;
@@ -1000,9 +867,9 @@ static __poll_t devkmsg_poll(struct file *file, poll_table *wait)
poll_wait(file, &log_wait, wait);
logbuf_lock_irq();
- if (user->seq < log_next_seq) {
+ if (prb_read_valid(prb, user->seq, NULL)) {
/* return error when data has vanished underneath us */
- if (user->seq < log_first_seq)
+ if (user->seq < prb_first_valid_seq(prb))
ret = EPOLLIN|EPOLLRDNORM|EPOLLERR|EPOLLPRI;
else
ret = EPOLLIN|EPOLLRDNORM;
@@ -1037,9 +904,11 @@ static int devkmsg_open(struct inode *inode, struct file *file)
mutex_init(&user->lock);
+ prb_rec_init_rd(&user->record, &user->info,
+ &user->text_buf[0], sizeof(user->text_buf));
+
logbuf_lock_irq();
- user->idx = log_first_idx;
- user->seq = log_first_seq;
+ user->seq = prb_first_valid_seq(prb);
logbuf_unlock_irq();
file->private_data = user;
@@ -1080,23 +949,58 @@ const struct file_operations kmsg_fops = {
*/
void log_buf_vmcoreinfo_setup(void)
{
- VMCOREINFO_SYMBOL(log_buf);
- VMCOREINFO_SYMBOL(log_buf_len);
- VMCOREINFO_SYMBOL(log_first_idx);
- VMCOREINFO_SYMBOL(clear_idx);
- VMCOREINFO_SYMBOL(log_next_idx);
+ struct dev_printk_info *dev_info = NULL;
+
+ VMCOREINFO_SYMBOL(prb);
+ VMCOREINFO_SYMBOL(printk_rb_static);
+ VMCOREINFO_SYMBOL(clear_seq);
+
/*
- * Export struct printk_log size and field offsets. User space tools can
+ * Export struct size and field offsets. User space tools can
* parse it and detect any changes to structure down the line.
*/
- VMCOREINFO_STRUCT_SIZE(printk_log);
- VMCOREINFO_OFFSET(printk_log, ts_nsec);
- VMCOREINFO_OFFSET(printk_log, len);
- VMCOREINFO_OFFSET(printk_log, text_len);
- VMCOREINFO_OFFSET(printk_log, dict_len);
-#ifdef CONFIG_PRINTK_CALLER
- VMCOREINFO_OFFSET(printk_log, caller_id);
-#endif
+
+ VMCOREINFO_STRUCT_SIZE(printk_ringbuffer);
+ VMCOREINFO_OFFSET(printk_ringbuffer, desc_ring);
+ VMCOREINFO_OFFSET(printk_ringbuffer, text_data_ring);
+ VMCOREINFO_OFFSET(printk_ringbuffer, fail);
+
+ VMCOREINFO_STRUCT_SIZE(prb_desc_ring);
+ VMCOREINFO_OFFSET(prb_desc_ring, count_bits);
+ VMCOREINFO_OFFSET(prb_desc_ring, descs);
+ VMCOREINFO_OFFSET(prb_desc_ring, infos);
+ VMCOREINFO_OFFSET(prb_desc_ring, head_id);
+ VMCOREINFO_OFFSET(prb_desc_ring, tail_id);
+
+ VMCOREINFO_STRUCT_SIZE(prb_desc);
+ VMCOREINFO_OFFSET(prb_desc, state_var);
+ VMCOREINFO_OFFSET(prb_desc, text_blk_lpos);
+
+ VMCOREINFO_STRUCT_SIZE(prb_data_blk_lpos);
+ VMCOREINFO_OFFSET(prb_data_blk_lpos, begin);
+ VMCOREINFO_OFFSET(prb_data_blk_lpos, next);
+
+ VMCOREINFO_STRUCT_SIZE(printk_info);
+ VMCOREINFO_OFFSET(printk_info, seq);
+ VMCOREINFO_OFFSET(printk_info, ts_nsec);
+ VMCOREINFO_OFFSET(printk_info, text_len);
+ VMCOREINFO_OFFSET(printk_info, caller_id);
+ VMCOREINFO_OFFSET(printk_info, dev_info);
+
+ VMCOREINFO_STRUCT_SIZE(dev_printk_info);
+ VMCOREINFO_OFFSET(dev_printk_info, subsystem);
+ VMCOREINFO_LENGTH(printk_info_subsystem, sizeof(dev_info->subsystem));
+ VMCOREINFO_OFFSET(dev_printk_info, device);
+ VMCOREINFO_LENGTH(printk_info_device, sizeof(dev_info->device));
+
+ VMCOREINFO_STRUCT_SIZE(prb_data_ring);
+ VMCOREINFO_OFFSET(prb_data_ring, size_bits);
+ VMCOREINFO_OFFSET(prb_data_ring, data);
+ VMCOREINFO_OFFSET(prb_data_ring, head_lpos);
+ VMCOREINFO_OFFSET(prb_data_ring, tail_lpos);
+
+ VMCOREINFO_SIZE(atomic_long_t);
+ VMCOREINFO_TYPE_OFFSET(atomic_long_t, counter);
}
#endif
@@ -1174,11 +1078,46 @@ static void __init set_percpu_data_ready(void)
__printk_percpu_data_ready = true;
}
+static unsigned int __init add_to_rb(struct printk_ringbuffer *rb,
+ struct printk_record *r)
+{
+ struct prb_reserved_entry e;
+ struct printk_record dest_r;
+
+ prb_rec_init_wr(&dest_r, r->info->text_len);
+
+ if (!prb_reserve(&e, rb, &dest_r))
+ return 0;
+
+ memcpy(&dest_r.text_buf[0], &r->text_buf[0], r->info->text_len);
+ dest_r.info->text_len = r->info->text_len;
+ dest_r.info->facility = r->info->facility;
+ dest_r.info->level = r->info->level;
+ dest_r.info->flags = r->info->flags;
+ dest_r.info->ts_nsec = r->info->ts_nsec;
+ dest_r.info->caller_id = r->info->caller_id;
+ memcpy(&dest_r.info->dev_info, &r->info->dev_info, sizeof(dest_r.info->dev_info));
+
+ prb_final_commit(&e);
+
+ return prb_record_text_space(&e);
+}
+
+static char setup_text_buf[LOG_LINE_MAX] __initdata;
+
void __init setup_log_buf(int early)
{
+ struct printk_info *new_infos;
+ unsigned int new_descs_count;
+ struct prb_desc *new_descs;
+ struct printk_info info;
+ struct printk_record r;
+ size_t new_descs_size;
+ size_t new_infos_size;
unsigned long flags;
char *new_log_buf;
unsigned int free;
+ u64 seq;
/*
* Some archs call setup_log_buf() multiple times - first is very
@@ -1197,24 +1136,75 @@ void __init setup_log_buf(int early)
if (!new_log_buf_len)
return;
+ new_descs_count = new_log_buf_len >> PRB_AVGBITS;
+ if (new_descs_count == 0) {
+ pr_err("new_log_buf_len: %lu too small\n", new_log_buf_len);
+ return;
+ }
+
new_log_buf = memblock_alloc(new_log_buf_len, LOG_ALIGN);
if (unlikely(!new_log_buf)) {
- pr_err("log_buf_len: %lu bytes not available\n",
- new_log_buf_len);
+ pr_err("log_buf_len: %lu text bytes not available\n",
+ new_log_buf_len);
return;
}
+ new_descs_size = new_descs_count * sizeof(struct prb_desc);
+ new_descs = memblock_alloc(new_descs_size, LOG_ALIGN);
+ if (unlikely(!new_descs)) {
+ pr_err("log_buf_len: %zu desc bytes not available\n",
+ new_descs_size);
+ goto err_free_log_buf;
+ }
+
+ new_infos_size = new_descs_count * sizeof(struct printk_info);
+ new_infos = memblock_alloc(new_infos_size, LOG_ALIGN);
+ if (unlikely(!new_infos)) {
+ pr_err("log_buf_len: %zu info bytes not available\n",
+ new_infos_size);
+ goto err_free_descs;
+ }
+
+ prb_rec_init_rd(&r, &info, &setup_text_buf[0], sizeof(setup_text_buf));
+
+ prb_init(&printk_rb_dynamic,
+ new_log_buf, ilog2(new_log_buf_len),
+ new_descs, ilog2(new_descs_count),
+ new_infos);
+
logbuf_lock_irqsave(flags);
+
log_buf_len = new_log_buf_len;
log_buf = new_log_buf;
new_log_buf_len = 0;
- free = __LOG_BUF_LEN - log_next_idx;
- memcpy(log_buf, __log_buf, __LOG_BUF_LEN);
+
+ free = __LOG_BUF_LEN;
+ prb_for_each_record(0, &printk_rb_static, seq, &r)
+ free -= add_to_rb(&printk_rb_dynamic, &r);
+
+ /*
+ * This is early enough that everything is still running on the
+ * boot CPU and interrupts are disabled. So no new messages will
+ * appear during the transition to the dynamic buffer.
+ */
+ prb = &printk_rb_dynamic;
+
logbuf_unlock_irqrestore(flags);
+ if (seq != prb_next_seq(&printk_rb_static)) {
+ pr_err("dropped %llu messages\n",
+ prb_next_seq(&printk_rb_static) - seq);
+ }
+
pr_info("log_buf_len: %u bytes\n", log_buf_len);
pr_info("early log buf free: %u(%u%%)\n",
free, (free * 100) / __LOG_BUF_LEN);
+ return;
+
+err_free_descs:
+ memblock_free(__pa(new_descs), new_descs_size);
+err_free_log_buf:
+ memblock_free(__pa(new_log_buf), new_log_buf_len);
}
static bool __read_mostly ignore_loglevel;
@@ -1321,18 +1311,18 @@ static size_t print_caller(u32 id, char *buf)
#define print_caller(id, buf) 0
#endif
-static size_t print_prefix(const struct printk_log *msg, bool syslog,
- bool time, char *buf)
+static size_t info_print_prefix(const struct printk_info *info, bool syslog,
+ bool time, char *buf)
{
size_t len = 0;
if (syslog)
- len = print_syslog((msg->facility << 3) | msg->level, buf);
+ len = print_syslog((info->facility << 3) | info->level, buf);
if (time)
- len += print_time(msg->ts_nsec, buf + len);
+ len += print_time(info->ts_nsec, buf + len);
- len += print_caller(msg->caller_id, buf + len);
+ len += print_caller(info->caller_id, buf + len);
if (IS_ENABLED(CONFIG_PRINTK_CALLER) || time) {
buf[len++] = ' ';
@@ -1342,72 +1332,150 @@ static size_t print_prefix(const struct printk_log *msg, bool syslog,
return len;
}
-static size_t msg_print_text(const struct printk_log *msg, bool syslog,
- bool time, char *buf, size_t size)
+/*
+ * Prepare the record for printing. The text is shifted within the given
+ * buffer to avoid a need for another one. The following operations are
+ * done:
+ *
+ * - Add prefix for each line.
+ * - Add the trailing newline that has been removed in vprintk_store().
+ * - Drop truncated lines that do not longer fit into the buffer.
+ *
+ * Return: The length of the updated/prepared text, including the added
+ * prefixes and the newline. The dropped line(s) are not counted.
+ */
+static size_t record_print_text(struct printk_record *r, bool syslog,
+ bool time)
{
- const char *text = log_text(msg);
- size_t text_size = msg->text_len;
- size_t len = 0;
+ size_t text_len = r->info->text_len;
+ size_t buf_size = r->text_buf_size;
+ char *text = r->text_buf;
char prefix[PREFIX_MAX];
- const size_t prefix_len = print_prefix(msg, syslog, time, prefix);
+ bool truncated = false;
+ size_t prefix_len;
+ size_t line_len;
+ size_t len = 0;
+ char *next;
+
+ /*
+ * If the message was truncated because the buffer was not large
+ * enough, treat the available text as if it were the full text.
+ */
+ if (text_len > buf_size)
+ text_len = buf_size;
- do {
- const char *next = memchr(text, '\n', text_size);
- size_t text_len;
+ prefix_len = info_print_prefix(r->info, syslog, time, prefix);
+ /*
+ * @text_len: bytes of unprocessed text
+ * @line_len: bytes of current line _without_ newline
+ * @text: pointer to beginning of current line
+ * @len: number of bytes prepared in r->text_buf
+ */
+ for (;;) {
+ next = memchr(text, '\n', text_len);
if (next) {
- text_len = next - text;
- next++;
- text_size -= next - text;
+ line_len = next - text;
} else {
- text_len = text_size;
+ /* Drop truncated line(s). */
+ if (truncated)
+ break;
+ line_len = text_len;
}
- if (buf) {
- if (prefix_len + text_len + 1 >= size - len)
+ /*
+ * Truncate the text if there is not enough space to add the
+ * prefix and a trailing newline.
+ */
+ if (len + prefix_len + text_len + 1 > buf_size) {
+ /* Drop even the current line if no space. */
+ if (len + prefix_len + line_len + 1 > buf_size)
break;
- memcpy(buf + len, prefix, prefix_len);
- len += prefix_len;
- memcpy(buf + len, text, text_len);
- len += text_len;
- buf[len++] = '\n';
- } else {
- /* SYSLOG_ACTION_* buffer size only calculation */
- len += prefix_len + text_len + 1;
+ text_len = buf_size - len - prefix_len - 1;
+ truncated = true;
}
- text = next;
- } while (text);
+ memmove(text + prefix_len, text, text_len);
+ memcpy(text, prefix, prefix_len);
+
+ len += prefix_len + line_len + 1;
+
+ if (text_len == line_len) {
+ /*
+ * Add the trailing newline removed in
+ * vprintk_store().
+ */
+ text[prefix_len + line_len] = '\n';
+ break;
+ }
+
+ /*
+ * Advance beyond the added prefix and the related line with
+ * its newline.
+ */
+ text += prefix_len + line_len + 1;
+
+ /*
+ * The remaining text has only decreased by the line with its
+ * newline.
+ *
+ * Note that @text_len can become zero. It happens when @text
+ * ended with a newline (either due to truncation or the
+ * original string ending with "\n\n"). The loop is correctly
+ * repeated and (if not truncated) an empty line with a prefix
+ * will be prepared.
+ */
+ text_len -= line_len + 1;
+ }
return len;
}
+static size_t get_record_print_text_size(struct printk_info *info,
+ unsigned int line_count,
+ bool syslog, bool time)
+{
+ char prefix[PREFIX_MAX];
+ size_t prefix_len;
+
+ prefix_len = info_print_prefix(info, syslog, time, prefix);
+
+ /*
+ * Each line will be preceded with a prefix. The intermediate
+ * newlines are already within the text, but a final trailing
+ * newline will be added.
+ */
+ return ((prefix_len * line_count) + info->text_len + 1);
+}
+
static int syslog_print(char __user *buf, int size)
{
+ struct printk_info info;
+ struct printk_record r;
char *text;
- struct printk_log *msg;
int len = 0;
text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
if (!text)
return -ENOMEM;
+ prb_rec_init_rd(&r, &info, text, LOG_LINE_MAX + PREFIX_MAX);
+
while (size > 0) {
size_t n;
size_t skip;
logbuf_lock_irq();
- if (syslog_seq < log_first_seq) {
- /* messages are gone, move to first one */
- syslog_seq = log_first_seq;
- syslog_idx = log_first_idx;
- syslog_partial = 0;
- }
- if (syslog_seq == log_next_seq) {
+ if (!prb_read_valid(prb, syslog_seq, &r)) {
logbuf_unlock_irq();
break;
}
+ if (r.info->seq != syslog_seq) {
+ /* message is gone, move to next valid one */
+ syslog_seq = r.info->seq;
+ syslog_partial = 0;
+ }
/*
* To keep reading/counting partial line consistent,
@@ -1417,13 +1485,10 @@ static int syslog_print(char __user *buf, int size)
syslog_time = printk_time;
skip = syslog_partial;
- msg = log_from_idx(syslog_idx);
- n = msg_print_text(msg, true, syslog_time, text,
- LOG_LINE_MAX + PREFIX_MAX);
+ n = record_print_text(&r, true, syslog_time);
if (n - syslog_partial <= size) {
/* message fits into buffer, move forward */
- syslog_idx = log_next(syslog_idx);
- syslog_seq++;
+ syslog_seq = r.info->seq + 1;
n -= syslog_partial;
syslog_partial = 0;
} else if (!len){
@@ -1454,11 +1519,12 @@ static int syslog_print(char __user *buf, int size)
static int syslog_print_all(char __user *buf, int size, bool clear)
{
+ struct printk_info info;
+ unsigned int line_count;
+ struct printk_record r;
char *text;
int len = 0;
- u64 next_seq;
u64 seq;
- u32 idx;
bool time;
text = kmalloc(LOG_LINE_MAX + PREFIX_MAX, GFP_KERNEL);
@@ -1471,38 +1537,28 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
* Find first record that fits, including all following records,
* into the user-provided buffer for this dump.
*/
- seq = clear_seq;
- idx = clear_idx;
- while (seq < log_next_seq) {
- struct printk_log *msg = log_from_idx(idx);
-
- len += msg_print_text(msg, true, time, NULL, 0);
- idx = log_next(idx);
- seq++;
- }
+ prb_for_each_info(clear_seq, prb, seq, &info, &line_count)
+ len += get_record_print_text_size(&info, line_count, true, time);
/* move first record forward until length fits into the buffer */
- seq = clear_seq;
- idx = clear_idx;
- while (len > size && seq < log_next_seq) {
- struct printk_log *msg = log_from_idx(idx);
-
- len -= msg_print_text(msg, true, time, NULL, 0);
- idx = log_next(idx);
- seq++;
+ prb_for_each_info(clear_seq, prb, seq, &info, &line_count) {
+ if (len <= size)
+ break;
+ len -= get_record_print_text_size(&info, line_count, true, time);
}
- /* last message fitting into this dump */
- next_seq = log_next_seq;
+ prb_rec_init_rd(&r, &info, text, LOG_LINE_MAX + PREFIX_MAX);
len = 0;
- while (len >= 0 && seq < next_seq) {
- struct printk_log *msg = log_from_idx(idx);
- int textlen = msg_print_text(msg, true, time, text,
- LOG_LINE_MAX + PREFIX_MAX);
+ prb_for_each_record(seq, prb, seq, &r) {
+ int textlen;
- idx = log_next(idx);
- seq++;
+ textlen = record_print_text(&r, true, time);
+
+ if (len + textlen > size) {
+ seq--;
+ break;
+ }
logbuf_unlock_irq();
if (copy_to_user(buf + len, text, textlen))
@@ -1511,17 +1567,12 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
len += textlen;
logbuf_lock_irq();
- if (seq < log_first_seq) {
- /* messages are gone, move to next one */
- seq = log_first_seq;
- idx = log_first_idx;
- }
+ if (len < 0)
+ break;
}
- if (clear) {
- clear_seq = log_next_seq;
- clear_idx = log_next_idx;
- }
+ if (clear)
+ clear_seq = seq;
logbuf_unlock_irq();
kfree(text);
@@ -1531,8 +1582,7 @@ static int syslog_print_all(char __user *buf, int size, bool clear)
static void syslog_clear(void)
{
logbuf_lock_irq();
- clear_seq = log_next_seq;
- clear_idx = log_next_idx;
+ clear_seq = prb_next_seq(prb);
logbuf_unlock_irq();
}
@@ -1559,7 +1609,7 @@ int do_syslog(int type, char __user *buf, int len, int source)
if (!access_ok(buf, len))
return -EFAULT;
error = wait_event_interruptible(log_wait,
- syslog_seq != log_next_seq);
+ prb_read_valid(prb, syslog_seq, NULL));
if (error)
return error;
error = syslog_print(buf, len);
@@ -1567,7 +1617,7 @@ int do_syslog(int type, char __user *buf, int len, int source)
/* Read/clear last kernel messages */
case SYSLOG_ACTION_READ_CLEAR:
clear = true;
- /* FALL THRU */
+ fallthrough;
/* Read last kernel messages */
case SYSLOG_ACTION_READ_ALL:
if (!buf || len < 0)
@@ -1608,10 +1658,9 @@ int do_syslog(int type, char __user *buf, int len, int source)
/* Number of chars in the log buffer */
case SYSLOG_ACTION_SIZE_UNREAD:
logbuf_lock_irq();
- if (syslog_seq < log_first_seq) {
+ if (syslog_seq < prb_first_valid_seq(prb)) {
/* messages are gone, move to first one */
- syslog_seq = log_first_seq;
- syslog_idx = log_first_idx;
+ syslog_seq = prb_first_valid_seq(prb);
syslog_partial = 0;
}
if (source == SYSLOG_FROM_PROC) {
@@ -1620,20 +1669,18 @@ int do_syslog(int type, char __user *buf, int len, int source)
* for pending data, not the size; return the count of
* records, not the length.
*/
- error = log_next_seq - syslog_seq;
+ error = prb_next_seq(prb) - syslog_seq;
} else {
- u64 seq = syslog_seq;
- u32 idx = syslog_idx;
bool time = syslog_partial ? syslog_time : printk_time;
-
- while (seq < log_next_seq) {
- struct printk_log *msg = log_from_idx(idx);
-
- error += msg_print_text(msg, true, time, NULL,
- 0);
+ struct printk_info info;
+ unsigned int line_count;
+ u64 seq;
+
+ prb_for_each_info(syslog_seq, prb, seq, &info,
+ &line_count) {
+ error += get_record_print_text_size(&info, line_count,
+ true, time);
time = printk_time;
- idx = log_next(idx);
- seq++;
}
error -= syslog_partial;
}
@@ -1804,10 +1851,22 @@ static int console_trylock_spinning(void)
static void call_console_drivers(const char *ext_text, size_t ext_len,
const char *text, size_t len)
{
+ static char dropped_text[64];
+ size_t dropped_len = 0;
struct console *con;
trace_console_rcuidle(text, len);
+ if (!console_drivers)
+ return;
+
+ if (console_dropped) {
+ dropped_len = snprintf(dropped_text, sizeof(dropped_text),
+ "** %lu printk messages dropped **\n",
+ console_dropped);
+ console_dropped = 0;
+ }
+
for_each_console(con) {
if (exclusive_console && con != exclusive_console)
continue;
@@ -1820,8 +1879,11 @@ static void call_console_drivers(const char *ext_text, size_t ext_len,
continue;
if (con->flags & CON_EXTENDED)
con->write(con, ext_text, ext_len);
- else
+ else {
+ if (dropped_len)
+ con->write(con, dropped_text, dropped_len);
con->write(con, text, len);
+ }
}
}
@@ -1845,97 +1907,38 @@ static inline u32 printk_caller_id(void)
0x80000000 + raw_smp_processor_id();
}
-/*
- * Continuation lines are buffered, and not committed to the record buffer
- * until the line is complete, or a race forces it. The line fragments
- * though, are printed immediately to the consoles to ensure everything has
- * reached the console in case of a kernel crash.
- */
-static struct cont {
- char buf[LOG_LINE_MAX];
- size_t len; /* length == 0 means unused buffer */
- u32 caller_id; /* printk_caller_id() of first print */
- u64 ts_nsec; /* time of first print */
- u8 level; /* log level of first message */
- u8 facility; /* log facility of first message */
- enum log_flags flags; /* prefix, newline flags */
-} cont;
-
-static void cont_flush(void)
-{
- if (cont.len == 0)
- return;
-
- log_store(cont.caller_id, cont.facility, cont.level, cont.flags,
- cont.ts_nsec, NULL, 0, cont.buf, cont.len);
- cont.len = 0;
-}
-
-static bool cont_add(u32 caller_id, int facility, int level,
- enum log_flags flags, const char *text, size_t len)
-{
- /* If the line gets too long, split it up in separate records. */
- if (cont.len + len > sizeof(cont.buf)) {
- cont_flush();
- return false;
- }
-
- if (!cont.len) {
- cont.facility = facility;
- cont.level = level;
- cont.caller_id = caller_id;
- cont.ts_nsec = local_clock();
- cont.flags = flags;
- }
-
- memcpy(cont.buf + cont.len, text, len);
- cont.len += len;
-
- // The original flags come from the first line,
- // but later continuations can add a newline.
- if (flags & LOG_NEWLINE) {
- cont.flags |= LOG_NEWLINE;
- cont_flush();
- }
-
- return true;
-}
-
-static size_t log_output(int facility, int level, enum log_flags lflags, const char *dict, size_t dictlen, char *text, size_t text_len)
+static size_t log_output(int facility, int level, enum log_flags lflags,
+ const struct dev_printk_info *dev_info,
+ char *text, size_t text_len)
{
const u32 caller_id = printk_caller_id();
- /*
- * If an earlier line was buffered, and we're a continuation
- * write from the same context, try to add it to the buffer.
- */
- if (cont.len) {
- if (cont.caller_id == caller_id && (lflags & LOG_CONT)) {
- if (cont_add(caller_id, facility, level, lflags, text, text_len))
- return text_len;
- }
- /* Otherwise, make sure it's flushed */
- cont_flush();
- }
-
- /* Skip empty continuation lines that couldn't be added - they just flush */
- if (!text_len && (lflags & LOG_CONT))
- return 0;
-
- /* If it doesn't end in a newline, try to buffer the current line */
- if (!(lflags & LOG_NEWLINE)) {
- if (cont_add(caller_id, facility, level, lflags, text, text_len))
+ if (lflags & LOG_CONT) {
+ struct prb_reserved_entry e;
+ struct printk_record r;
+
+ prb_rec_init_wr(&r, text_len);
+ if (prb_reserve_in_last(&e, prb, &r, caller_id, LOG_LINE_MAX)) {
+ memcpy(&r.text_buf[r.info->text_len], text, text_len);
+ r.info->text_len += text_len;
+ if (lflags & LOG_NEWLINE) {
+ r.info->flags |= LOG_NEWLINE;
+ prb_final_commit(&e);
+ } else {
+ prb_commit(&e);
+ }
return text_len;
+ }
}
/* Store it in the record log */
return log_store(caller_id, facility, level, lflags, 0,
- dict, dictlen, text, text_len);
+ dev_info, text, text_len);
}
/* Must be called under logbuf_lock. */
int vprintk_store(int facility, int level,
- const char *dict, size_t dictlen,
+ const struct dev_printk_info *dev_info,
const char *fmt, va_list args)
{
static char textbuf[LOG_LINE_MAX];
@@ -1977,21 +1980,19 @@ int vprintk_store(int facility, int level,
if (level == LOGLEVEL_DEFAULT)
level = default_message_loglevel;
- if (dict)
+ if (dev_info)
lflags |= LOG_NEWLINE;
- return log_output(facility, level, lflags,
- dict, dictlen, text, text_len);
+ return log_output(facility, level, lflags, dev_info, text, text_len);
}
asmlinkage int vprintk_emit(int facility, int level,
- const char *dict, size_t dictlen,
+ const struct dev_printk_info *dev_info,
const char *fmt, va_list args)
{
int printed_len;
- bool in_sched = false, pending_output;
+ bool in_sched = false;
unsigned long flags;
- u64 curr_log_seq;
/* Suppress unimportant messages after panic happens */
if (unlikely(suppress_printk))
@@ -2007,13 +2008,11 @@ asmlinkage int vprintk_emit(int facility, int level,
/* This stops the holder of console_sem just where we want him */
logbuf_lock_irqsave(flags);
- curr_log_seq = log_next_seq;
- printed_len = vprintk_store(facility, level, dict, dictlen, fmt, args);
- pending_output = (curr_log_seq != log_next_seq);
+ printed_len = vprintk_store(facility, level, dev_info, fmt, args);
logbuf_unlock_irqrestore(flags);
/* If called from the scheduler, we can not call up(). */
- if (!in_sched && pending_output) {
+ if (!in_sched) {
/*
* Disable preemption to avoid being preempted while holding
* console_sem which would prevent anyone from printing to
@@ -2030,8 +2029,7 @@ asmlinkage int vprintk_emit(int facility, int level,
preempt_enable();
}
- if (pending_output)
- wake_up_klogd();
+ wake_up_klogd();
return printed_len;
}
EXPORT_SYMBOL(vprintk_emit);
@@ -2044,7 +2042,7 @@ EXPORT_SYMBOL(vprintk);
int vprintk_default(const char *fmt, va_list args)
{
- return vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, 0, fmt, args);
+ return vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, fmt, args);
}
EXPORT_SYMBOL_GPL(vprintk_default);
@@ -2088,30 +2086,31 @@ EXPORT_SYMBOL(printk);
#define PREFIX_MAX 0
#define printk_time false
+#define prb_read_valid(rb, seq, r) false
+#define prb_first_valid_seq(rb) 0
+
static u64 syslog_seq;
-static u32 syslog_idx;
static u64 console_seq;
-static u32 console_idx;
static u64 exclusive_console_stop_seq;
-static u64 log_first_seq;
-static u32 log_first_idx;
-static u64 log_next_seq;
-static char *log_text(const struct printk_log *msg) { return NULL; }
-static char *log_dict(const struct printk_log *msg) { return NULL; }
-static struct printk_log *log_from_idx(u32 idx) { return NULL; }
-static u32 log_next(u32 idx) { return 0; }
-static ssize_t msg_print_ext_header(char *buf, size_t size,
- struct printk_log *msg,
- u64 seq) { return 0; }
+static unsigned long console_dropped;
+
+static size_t record_print_text(const struct printk_record *r,
+ bool syslog, bool time)
+{
+ return 0;
+}
+static ssize_t info_print_ext_header(char *buf, size_t size,
+ struct printk_info *info)
+{
+ return 0;
+}
static ssize_t msg_print_ext_body(char *buf, size_t size,
- char *dict, size_t dict_len,
- char *text, size_t text_len) { return 0; }
+ char *text, size_t text_len,
+ struct dev_printk_info *dev_info) { return 0; }
static void console_lock_spinning_enable(void) { }
static int console_lock_spinning_disable_and_check(void) { return 0; }
static void call_console_drivers(const char *ext_text, size_t ext_len,
const char *text, size_t len) {}
-static size_t msg_print_text(const struct printk_log *msg, bool syslog,
- bool time, char *buf, size_t size) { return 0; }
static bool suppress_message_printing(int level) { return false; }
#endif /* CONFIG_PRINTK */
@@ -2398,12 +2397,16 @@ void console_unlock(void)
static char text[LOG_LINE_MAX + PREFIX_MAX];
unsigned long flags;
bool do_cond_resched, retry;
+ struct printk_info info;
+ struct printk_record r;
if (console_suspended) {
up_console_sem();
return;
}
+ prb_rec_init_rd(&r, &info, text, sizeof(text));
+
/*
* Console drivers are called with interrupts disabled, so
* @console_may_schedule should be cleared before; however, we may
@@ -2416,7 +2419,7 @@ void console_unlock(void)
*
* console_trylock() is not able to detect the preemptive
* context reliably. Therefore the value must be stored before
- * and cleared after the the "again" goto label.
+ * and cleared after the "again" goto label.
*/
do_cond_resched = console_may_schedule;
again:
@@ -2434,35 +2437,26 @@ again:
}
for (;;) {
- struct printk_log *msg;
size_t ext_len = 0;
size_t len;
printk_safe_enter_irqsave(flags);
raw_spin_lock(&logbuf_lock);
- if (console_seq < log_first_seq) {
- len = snprintf(text, sizeof(text),
- "** %llu printk messages dropped **\n",
- log_first_seq - console_seq);
-
- /* messages are gone, move to first one */
- console_seq = log_first_seq;
- console_idx = log_first_idx;
- } else {
- len = 0;
- }
skip:
- if (console_seq == log_next_seq)
+ if (!prb_read_valid(prb, console_seq, &r))
break;
- msg = log_from_idx(console_idx);
- if (suppress_message_printing(msg->level)) {
+ if (console_seq != r.info->seq) {
+ console_dropped += r.info->seq - console_seq;
+ console_seq = r.info->seq;
+ }
+
+ if (suppress_message_printing(r.info->level)) {
/*
* Skip record we have buffered and already printed
* directly to the console when we received it, and
* record that has level above the console loglevel.
*/
- console_idx = log_next(console_idx);
console_seq++;
goto skip;
}
@@ -2473,19 +2467,23 @@ skip:
exclusive_console = NULL;
}
- len += msg_print_text(msg,
- console_msg_format & MSG_FORMAT_SYSLOG,
- printk_time, text + len, sizeof(text) - len);
+ /*
+ * Handle extended console text first because later
+ * record_print_text() will modify the record buffer in-place.
+ */
if (nr_ext_console_drivers) {
- ext_len = msg_print_ext_header(ext_text,
+ ext_len = info_print_ext_header(ext_text,
sizeof(ext_text),
- msg, console_seq);
+ r.info);
ext_len += msg_print_ext_body(ext_text + ext_len,
sizeof(ext_text) - ext_len,
- log_dict(msg), msg->dict_len,
- log_text(msg), msg->text_len);
+ &r.text_buf[0],
+ r.info->text_len,
+ &r.info->dev_info);
}
- console_idx = log_next(console_idx);
+ len = record_print_text(&r,
+ console_msg_format & MSG_FORMAT_SYSLOG,
+ printk_time);
console_seq++;
raw_spin_unlock(&logbuf_lock);
@@ -2525,7 +2523,7 @@ skip:
* flush, no worries.
*/
raw_spin_lock(&logbuf_lock);
- retry = console_seq != log_next_seq;
+ retry = prb_read_valid(prb, console_seq, NULL);
raw_spin_unlock(&logbuf_lock);
printk_safe_exit_irqrestore(flags);
@@ -2594,8 +2592,7 @@ void console_flush_on_panic(enum con_flush_mode mode)
unsigned long flags;
logbuf_lock_irqsave(flags);
- console_seq = log_first_seq;
- console_idx = log_first_idx;
+ console_seq = prb_first_valid_seq(prb);
logbuf_unlock_irqrestore(flags);
}
console_unlock();
@@ -2838,7 +2835,6 @@ void register_console(struct console *newcon)
exclusive_console = newcon;
exclusive_console_stop_seq = console_seq;
console_seq = syslog_seq;
- console_idx = syslog_idx;
logbuf_unlock_irqrestore(flags);
}
console_unlock();
@@ -3062,7 +3058,7 @@ int vprintk_deferred(const char *fmt, va_list args)
{
int r;
- r = vprintk_emit(0, LOGLEVEL_SCHED, NULL, 0, fmt, args);
+ r = vprintk_emit(0, LOGLEVEL_SCHED, NULL, fmt, args);
defer_console_output();
return r;
@@ -3227,9 +3223,7 @@ void kmsg_dump(enum kmsg_dump_reason reason)
logbuf_lock_irqsave(flags);
dumper->cur_seq = clear_seq;
- dumper->cur_idx = clear_idx;
- dumper->next_seq = log_next_seq;
- dumper->next_idx = log_next_idx;
+ dumper->next_seq = prb_next_seq(prb);
logbuf_unlock_irqrestore(flags);
/* invoke dumper which will iterate over records */
@@ -3263,28 +3257,33 @@ void kmsg_dump(enum kmsg_dump_reason reason)
bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
char *line, size_t size, size_t *len)
{
- struct printk_log *msg;
+ struct printk_info info;
+ unsigned int line_count;
+ struct printk_record r;
size_t l = 0;
bool ret = false;
+ prb_rec_init_rd(&r, &info, line, size);
+
if (!dumper->active)
goto out;
- if (dumper->cur_seq < log_first_seq) {
- /* messages are gone, move to first available one */
- dumper->cur_seq = log_first_seq;
- dumper->cur_idx = log_first_idx;
- }
-
- /* last entry */
- if (dumper->cur_seq >= log_next_seq)
- goto out;
+ /* Read text or count text lines? */
+ if (line) {
+ if (!prb_read_valid(prb, dumper->cur_seq, &r))
+ goto out;
+ l = record_print_text(&r, syslog, printk_time);
+ } else {
+ if (!prb_read_valid_info(prb, dumper->cur_seq,
+ &info, &line_count)) {
+ goto out;
+ }
+ l = get_record_print_text_size(&info, line_count, syslog,
+ printk_time);
- msg = log_from_idx(dumper->cur_idx);
- l = msg_print_text(msg, syslog, printk_time, line, size);
+ }
- dumper->cur_idx = log_next(dumper->cur_idx);
- dumper->cur_seq++;
+ dumper->cur_seq = r.info->seq + 1;
ret = true;
out:
if (len)
@@ -3332,7 +3331,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
* @len: length of line placed into buffer
*
* Start at the end of the kmsg buffer and fill the provided buffer
- * with as many of the the *youngest* kmsg records that fit into it.
+ * with as many of the *youngest* kmsg records that fit into it.
* If the buffer is large enough, all available kmsg records will be
* copied with a single call.
*
@@ -3345,23 +3344,25 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
char *buf, size_t size, size_t *len)
{
+ struct printk_info info;
+ unsigned int line_count;
+ struct printk_record r;
unsigned long flags;
u64 seq;
- u32 idx;
u64 next_seq;
- u32 next_idx;
size_t l = 0;
bool ret = false;
bool time = printk_time;
- if (!dumper->active)
+ prb_rec_init_rd(&r, &info, buf, size);
+
+ if (!dumper->active || !buf || !size)
goto out;
logbuf_lock_irqsave(flags);
- if (dumper->cur_seq < log_first_seq) {
+ if (dumper->cur_seq < prb_first_valid_seq(prb)) {
/* messages are gone, move to first available one */
- dumper->cur_seq = log_first_seq;
- dumper->cur_idx = log_first_idx;
+ dumper->cur_seq = prb_first_valid_seq(prb);
}
/* last entry */
@@ -3372,41 +3373,41 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
/* calculate length of entire buffer */
seq = dumper->cur_seq;
- idx = dumper->cur_idx;
- while (seq < dumper->next_seq) {
- struct printk_log *msg = log_from_idx(idx);
-
- l += msg_print_text(msg, true, time, NULL, 0);
- idx = log_next(idx);
- seq++;
+ while (prb_read_valid_info(prb, seq, &info, &line_count)) {
+ if (r.info->seq >= dumper->next_seq)
+ break;
+ l += get_record_print_text_size(&info, line_count, true, time);
+ seq = r.info->seq + 1;
}
/* move first record forward until length fits into the buffer */
seq = dumper->cur_seq;
- idx = dumper->cur_idx;
- while (l >= size && seq < dumper->next_seq) {
- struct printk_log *msg = log_from_idx(idx);
-
- l -= msg_print_text(msg, true, time, NULL, 0);
- idx = log_next(idx);
- seq++;
+ while (l >= size && prb_read_valid_info(prb, seq,
+ &info, &line_count)) {
+ if (r.info->seq >= dumper->next_seq)
+ break;
+ l -= get_record_print_text_size(&info, line_count, true, time);
+ seq = r.info->seq + 1;
}
/* last message in next interation */
next_seq = seq;
- next_idx = idx;
+ /* actually read text into the buffer now */
l = 0;
- while (seq < dumper->next_seq) {
- struct printk_log *msg = log_from_idx(idx);
+ while (prb_read_valid(prb, seq, &r)) {
+ if (r.info->seq >= dumper->next_seq)
+ break;
+
+ l += record_print_text(&r, syslog, time);
+
+ /* adjust record to store to remaining buffer space */
+ prb_rec_init_rd(&r, &info, buf + l, size - l);
- l += msg_print_text(msg, syslog, time, buf + l, size - l);
- idx = log_next(idx);
- seq++;
+ seq = r.info->seq + 1;
}
dumper->next_seq = next_seq;
- dumper->next_idx = next_idx;
ret = true;
logbuf_unlock_irqrestore(flags);
out:
@@ -3429,9 +3430,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
{
dumper->cur_seq = clear_seq;
- dumper->cur_idx = clear_idx;
- dumper->next_seq = log_next_seq;
- dumper->next_idx = log_next_idx;
+ dumper->next_seq = prb_next_seq(prb);
}
/**
diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
new file mode 100644
index 000000000000..2493348a1631
--- /dev/null
+++ b/kernel/printk/printk_ringbuffer.c
@@ -0,0 +1,2083 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/bug.h>
+#include "printk_ringbuffer.h"
+
+/**
+ * DOC: printk_ringbuffer overview
+ *
+ * Data Structure
+ * --------------
+ * The printk_ringbuffer is made up of 3 internal ringbuffers:
+ *
+ * desc_ring
+ * A ring of descriptors and their meta data (such as sequence number,
+ * timestamp, loglevel, etc.) as well as internal state information about
+ * the record and logical positions specifying where in the other
+ * ringbuffer the text strings are located.
+ *
+ * text_data_ring
+ * A ring of data blocks. A data block consists of an unsigned long
+ * integer (ID) that maps to a desc_ring index followed by the text
+ * string of the record.
+ *
+ * The internal state information of a descriptor is the key element to allow
+ * readers and writers to locklessly synchronize access to the data.
+ *
+ * Implementation
+ * --------------
+ *
+ * Descriptor Ring
+ * ~~~~~~~~~~~~~~~
+ * The descriptor ring is an array of descriptors. A descriptor contains
+ * essential meta data to track the data of a printk record using
+ * blk_lpos structs pointing to associated text data blocks (see
+ * "Data Rings" below). Each descriptor is assigned an ID that maps
+ * directly to index values of the descriptor array and has a state. The ID
+ * and the state are bitwise combined into a single descriptor field named
+ * @state_var, allowing ID and state to be synchronously and atomically
+ * updated.
+ *
+ * Descriptors have four states:
+ *
+ * reserved
+ * A writer is modifying the record.
+ *
+ * committed
+ * The record and all its data are written. A writer can reopen the
+ * descriptor (transitioning it back to reserved), but in the committed
+ * state the data is consistent.
+ *
+ * finalized
+ * The record and all its data are complete and available for reading. A
+ * writer cannot reopen the descriptor.
+ *
+ * reusable
+ * The record exists, but its text and/or meta data may no longer be
+ * available.
+ *
+ * Querying the @state_var of a record requires providing the ID of the
+ * descriptor to query. This can yield a possible fifth (pseudo) state:
+ *
+ * miss
+ * The descriptor being queried has an unexpected ID.
+ *
+ * The descriptor ring has a @tail_id that contains the ID of the oldest
+ * descriptor and @head_id that contains the ID of the newest descriptor.
+ *
+ * When a new descriptor should be created (and the ring is full), the tail
+ * descriptor is invalidated by first transitioning to the reusable state and
+ * then invalidating all tail data blocks up to and including the data blocks
+ * associated with the tail descriptor (for the text ring). Then
+ * @tail_id is advanced, followed by advancing @head_id. And finally the
+ * @state_var of the new descriptor is initialized to the new ID and reserved
+ * state.
+ *
+ * The @tail_id can only be advanced if the new @tail_id would be in the
+ * committed or reusable queried state. This makes it possible that a valid
+ * sequence number of the tail is always available.
+ *
+ * Descriptor Finalization
+ * ~~~~~~~~~~~~~~~~~~~~~~~
+ * When a writer calls the commit function prb_commit(), record data is
+ * fully stored and is consistent within the ringbuffer. However, a writer can
+ * reopen that record, claiming exclusive access (as with prb_reserve()), and
+ * modify that record. When finished, the writer must again commit the record.
+ *
+ * In order for a record to be made available to readers (and also become
+ * recyclable for writers), it must be finalized. A finalized record cannot be
+ * reopened and can never become "unfinalized". Record finalization can occur
+ * in three different scenarios:
+ *
+ * 1) A writer can simultaneously commit and finalize its record by calling
+ * prb_final_commit() instead of prb_commit().
+ *
+ * 2) When a new record is reserved and the previous record has been
+ * committed via prb_commit(), that previous record is automatically
+ * finalized.
+ *
+ * 3) When a record is committed via prb_commit() and a newer record
+ * already exists, the record being committed is automatically finalized.
+ *
+ * Data Ring
+ * ~~~~~~~~~
+ * The text data ring is a byte array composed of data blocks. Data blocks are
+ * referenced by blk_lpos structs that point to the logical position of the
+ * beginning of a data block and the beginning of the next adjacent data
+ * block. Logical positions are mapped directly to index values of the byte
+ * array ringbuffer.
+ *
+ * Each data block consists of an ID followed by the writer data. The ID is
+ * the identifier of a descriptor that is associated with the data block. A
+ * given data block is considered valid if all of the following conditions
+ * are met:
+ *
+ * 1) The descriptor associated with the data block is in the committed
+ * or finalized queried state.
+ *
+ * 2) The blk_lpos struct within the descriptor associated with the data
+ * block references back to the same data block.
+ *
+ * 3) The data block is within the head/tail logical position range.
+ *
+ * If the writer data of a data block would extend beyond the end of the
+ * byte array, only the ID of the data block is stored at the logical
+ * position and the full data block (ID and writer data) is stored at the
+ * beginning of the byte array. The referencing blk_lpos will point to the
+ * ID before the wrap and the next data block will be at the logical
+ * position adjacent the full data block after the wrap.
+ *
+ * Data rings have a @tail_lpos that points to the beginning of the oldest
+ * data block and a @head_lpos that points to the logical position of the
+ * next (not yet existing) data block.
+ *
+ * When a new data block should be created (and the ring is full), tail data
+ * blocks will first be invalidated by putting their associated descriptors
+ * into the reusable state and then pushing the @tail_lpos forward beyond
+ * them. Then the @head_lpos is pushed forward and is associated with a new
+ * descriptor. If a data block is not valid, the @tail_lpos cannot be
+ * advanced beyond it.
+ *
+ * Info Array
+ * ~~~~~~~~~~
+ * The general meta data of printk records are stored in printk_info structs,
+ * stored in an array with the same number of elements as the descriptor ring.
+ * Each info corresponds to the descriptor of the same index in the
+ * descriptor ring. Info validity is confirmed by evaluating the corresponding
+ * descriptor before and after loading the info.
+ *
+ * Usage
+ * -----
+ * Here are some simple examples demonstrating writers and readers. For the
+ * examples a global ringbuffer (test_rb) is available (which is not the
+ * actual ringbuffer used by printk)::
+ *
+ * DEFINE_PRINTKRB(test_rb, 15, 5);
+ *
+ * This ringbuffer allows up to 32768 records (2 ^ 15) and has a size of
+ * 1 MiB (2 ^ (15 + 5)) for text data.
+ *
+ * Sample writer code::
+ *
+ * const char *textstr = "message text";
+ * struct prb_reserved_entry e;
+ * struct printk_record r;
+ *
+ * // specify how much to allocate
+ * prb_rec_init_wr(&r, strlen(textstr) + 1);
+ *
+ * if (prb_reserve(&e, &test_rb, &r)) {
+ * snprintf(r.text_buf, r.text_buf_size, "%s", textstr);
+ *
+ * r.info->text_len = strlen(textstr);
+ * r.info->ts_nsec = local_clock();
+ * r.info->caller_id = printk_caller_id();
+ *
+ * // commit and finalize the record
+ * prb_final_commit(&e);
+ * }
+ *
+ * Note that additional writer functions are available to extend a record
+ * after it has been committed but not yet finalized. This can be done as
+ * long as no new records have been reserved and the caller is the same.
+ *
+ * Sample writer code (record extending)::
+ *
+ * // alternate rest of previous example
+ *
+ * r.info->text_len = strlen(textstr);
+ * r.info->ts_nsec = local_clock();
+ * r.info->caller_id = printk_caller_id();
+ *
+ * // commit the record (but do not finalize yet)
+ * prb_commit(&e);
+ * }
+ *
+ * ...
+ *
+ * // specify additional 5 bytes text space to extend
+ * prb_rec_init_wr(&r, 5);
+ *
+ * // try to extend, but only if it does not exceed 32 bytes
+ * if (prb_reserve_in_last(&e, &test_rb, &r, printk_caller_id()), 32) {
+ * snprintf(&r.text_buf[r.info->text_len],
+ * r.text_buf_size - r.info->text_len, "hello");
+ *
+ * r.info->text_len += 5;
+ *
+ * // commit and finalize the record
+ * prb_final_commit(&e);
+ * }
+ *
+ * Sample reader code::
+ *
+ * struct printk_info info;
+ * struct printk_record r;
+ * char text_buf[32];
+ * u64 seq;
+ *
+ * prb_rec_init_rd(&r, &info, &text_buf[0], sizeof(text_buf));
+ *
+ * prb_for_each_record(0, &test_rb, &seq, &r) {
+ * if (info.seq != seq)
+ * pr_warn("lost %llu records\n", info.seq - seq);
+ *
+ * if (info.text_len > r.text_buf_size) {
+ * pr_warn("record %llu text truncated\n", info.seq);
+ * text_buf[r.text_buf_size - 1] = 0;
+ * }
+ *
+ * pr_info("%llu: %llu: %s\n", info.seq, info.ts_nsec,
+ * &text_buf[0]);
+ * }
+ *
+ * Note that additional less convenient reader functions are available to
+ * allow complex record access.
+ *
+ * ABA Issues
+ * ~~~~~~~~~~
+ * To help avoid ABA issues, descriptors are referenced by IDs (array index
+ * values combined with tagged bits counting array wraps) and data blocks are
+ * referenced by logical positions (array index values combined with tagged
+ * bits counting array wraps). However, on 32-bit systems the number of
+ * tagged bits is relatively small such that an ABA incident is (at least
+ * theoretically) possible. For example, if 4 million maximally sized (1KiB)
+ * printk messages were to occur in NMI context on a 32-bit system, the
+ * interrupted context would not be able to recognize that the 32-bit integer
+ * completely wrapped and thus represents a different data block than the one
+ * the interrupted context expects.
+ *
+ * To help combat this possibility, additional state checking is performed
+ * (such as using cmpxchg() even though set() would suffice). These extra
+ * checks are commented as such and will hopefully catch any ABA issue that
+ * a 32-bit system might experience.
+ *
+ * Memory Barriers
+ * ~~~~~~~~~~~~~~~
+ * Multiple memory barriers are used. To simplify proving correctness and
+ * generating litmus tests, lines of code related to memory barriers
+ * (loads, stores, and the associated memory barriers) are labeled::
+ *
+ * LMM(function:letter)
+ *
+ * Comments reference the labels using only the "function:letter" part.
+ *
+ * The memory barrier pairs and their ordering are:
+ *
+ * desc_reserve:D / desc_reserve:B
+ * push descriptor tail (id), then push descriptor head (id)
+ *
+ * desc_reserve:D / data_push_tail:B
+ * push data tail (lpos), then set new descriptor reserved (state)
+ *
+ * desc_reserve:D / desc_push_tail:C
+ * push descriptor tail (id), then set new descriptor reserved (state)
+ *
+ * desc_reserve:D / prb_first_seq:C
+ * push descriptor tail (id), then set new descriptor reserved (state)
+ *
+ * desc_reserve:F / desc_read:D
+ * set new descriptor id and reserved (state), then allow writer changes
+ *
+ * data_alloc:A (or data_realloc:A) / desc_read:D
+ * set old descriptor reusable (state), then modify new data block area
+ *
+ * data_alloc:A (or data_realloc:A) / data_push_tail:B
+ * push data tail (lpos), then modify new data block area
+ *
+ * _prb_commit:B / desc_read:B
+ * store writer changes, then set new descriptor committed (state)
+ *
+ * desc_reopen_last:A / _prb_commit:B
+ * set descriptor reserved (state), then read descriptor data
+ *
+ * _prb_commit:B / desc_reserve:D
+ * set new descriptor committed (state), then check descriptor head (id)
+ *
+ * data_push_tail:D / data_push_tail:A
+ * set descriptor reusable (state), then push data tail (lpos)
+ *
+ * desc_push_tail:B / desc_reserve:D
+ * set descriptor reusable (state), then push descriptor tail (id)
+ */
+
+#define DATA_SIZE(data_ring) _DATA_SIZE((data_ring)->size_bits)
+#define DATA_SIZE_MASK(data_ring) (DATA_SIZE(data_ring) - 1)
+
+#define DESCS_COUNT(desc_ring) _DESCS_COUNT((desc_ring)->count_bits)
+#define DESCS_COUNT_MASK(desc_ring) (DESCS_COUNT(desc_ring) - 1)
+
+/* Determine the data array index from a logical position. */
+#define DATA_INDEX(data_ring, lpos) ((lpos) & DATA_SIZE_MASK(data_ring))
+
+/* Determine the desc array index from an ID or sequence number. */
+#define DESC_INDEX(desc_ring, n) ((n) & DESCS_COUNT_MASK(desc_ring))
+
+/* Determine how many times the data array has wrapped. */
+#define DATA_WRAPS(data_ring, lpos) ((lpos) >> (data_ring)->size_bits)
+
+/* Determine if a logical position refers to a data-less block. */
+#define LPOS_DATALESS(lpos) ((lpos) & 1UL)
+#define BLK_DATALESS(blk) (LPOS_DATALESS((blk)->begin) && \
+ LPOS_DATALESS((blk)->next))
+
+/* Get the logical position at index 0 of the current wrap. */
+#define DATA_THIS_WRAP_START_LPOS(data_ring, lpos) \
+((lpos) & ~DATA_SIZE_MASK(data_ring))
+
+/* Get the ID for the same index of the previous wrap as the given ID. */
+#define DESC_ID_PREV_WRAP(desc_ring, id) \
+DESC_ID((id) - DESCS_COUNT(desc_ring))
+
+/*
+ * A data block: mapped directly to the beginning of the data block area
+ * specified as a logical position within the data ring.
+ *
+ * @id: the ID of the associated descriptor
+ * @data: the writer data
+ *
+ * Note that the size of a data block is only known by its associated
+ * descriptor.
+ */
+struct prb_data_block {
+ unsigned long id;
+ char data[0];
+};
+
+/*
+ * Return the descriptor associated with @n. @n can be either a
+ * descriptor ID or a sequence number.
+ */
+static struct prb_desc *to_desc(struct prb_desc_ring *desc_ring, u64 n)
+{
+ return &desc_ring->descs[DESC_INDEX(desc_ring, n)];
+}
+
+/*
+ * Return the printk_info associated with @n. @n can be either a
+ * descriptor ID or a sequence number.
+ */
+static struct printk_info *to_info(struct prb_desc_ring *desc_ring, u64 n)
+{
+ return &desc_ring->infos[DESC_INDEX(desc_ring, n)];
+}
+
+static struct prb_data_block *to_block(struct prb_data_ring *data_ring,
+ unsigned long begin_lpos)
+{
+ return (void *)&data_ring->data[DATA_INDEX(data_ring, begin_lpos)];
+}
+
+/*
+ * Increase the data size to account for data block meta data plus any
+ * padding so that the adjacent data block is aligned on the ID size.
+ */
+static unsigned int to_blk_size(unsigned int size)
+{
+ struct prb_data_block *db = NULL;
+
+ size += sizeof(*db);
+ size = ALIGN(size, sizeof(db->id));
+ return size;
+}
+
+/*
+ * Sanity checker for reserve size. The ringbuffer code assumes that a data
+ * block does not exceed the maximum possible size that could fit within the
+ * ringbuffer. This function provides that basic size check so that the
+ * assumption is safe.
+ */
+static bool data_check_size(struct prb_data_ring *data_ring, unsigned int size)
+{
+ struct prb_data_block *db = NULL;
+
+ if (size == 0)
+ return true;
+
+ /*
+ * Ensure the alignment padded size could possibly fit in the data
+ * array. The largest possible data block must still leave room for
+ * at least the ID of the next block.
+ */
+ size = to_blk_size(size);
+ if (size > DATA_SIZE(data_ring) - sizeof(db->id))
+ return false;
+
+ return true;
+}
+
+/* Query the state of a descriptor. */
+static enum desc_state get_desc_state(unsigned long id,
+ unsigned long state_val)
+{
+ if (id != DESC_ID(state_val))
+ return desc_miss;
+
+ return DESC_STATE(state_val);
+}
+
+/*
+ * Get a copy of a specified descriptor and return its queried state. If the
+ * descriptor is in an inconsistent state (miss or reserved), the caller can
+ * only expect the descriptor's @state_var field to be valid.
+ *
+ * The sequence number and caller_id can be optionally retrieved. Like all
+ * non-state_var data, they are only valid if the descriptor is in a
+ * consistent state.
+ */
+static enum desc_state desc_read(struct prb_desc_ring *desc_ring,
+ unsigned long id, struct prb_desc *desc_out,
+ u64 *seq_out, u32 *caller_id_out)
+{
+ struct printk_info *info = to_info(desc_ring, id);
+ struct prb_desc *desc = to_desc(desc_ring, id);
+ atomic_long_t *state_var = &desc->state_var;
+ enum desc_state d_state;
+ unsigned long state_val;
+
+ /* Check the descriptor state. */
+ state_val = atomic_long_read(state_var); /* LMM(desc_read:A) */
+ d_state = get_desc_state(id, state_val);
+ if (d_state == desc_miss || d_state == desc_reserved) {
+ /*
+ * The descriptor is in an inconsistent state. Set at least
+ * @state_var so that the caller can see the details of
+ * the inconsistent state.
+ */
+ goto out;
+ }
+
+ /*
+ * Guarantee the state is loaded before copying the descriptor
+ * content. This avoids copying obsolete descriptor content that might
+ * not apply to the descriptor state. This pairs with _prb_commit:B.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_read:A reads from _prb_commit:B, then desc_read:C reads
+ * from _prb_commit:A.
+ *
+ * Relies on:
+ *
+ * WMB from _prb_commit:A to _prb_commit:B
+ * matching
+ * RMB from desc_read:A to desc_read:C
+ */
+ smp_rmb(); /* LMM(desc_read:B) */
+
+ /*
+ * Copy the descriptor data. The data is not valid until the
+ * state has been re-checked. A memcpy() for all of @desc
+ * cannot be used because of the atomic_t @state_var field.
+ */
+ memcpy(&desc_out->text_blk_lpos, &desc->text_blk_lpos,
+ sizeof(desc_out->text_blk_lpos)); /* LMM(desc_read:C) */
+ if (seq_out)
+ *seq_out = info->seq; /* also part of desc_read:C */
+ if (caller_id_out)
+ *caller_id_out = info->caller_id; /* also part of desc_read:C */
+
+ /*
+ * 1. Guarantee the descriptor content is loaded before re-checking
+ * the state. This avoids reading an obsolete descriptor state
+ * that may not apply to the copied content. This pairs with
+ * desc_reserve:F.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_read:C reads from desc_reserve:G, then desc_read:E
+ * reads from desc_reserve:F.
+ *
+ * Relies on:
+ *
+ * WMB from desc_reserve:F to desc_reserve:G
+ * matching
+ * RMB from desc_read:C to desc_read:E
+ *
+ * 2. Guarantee the record data is loaded before re-checking the
+ * state. This avoids reading an obsolete descriptor state that may
+ * not apply to the copied data. This pairs with data_alloc:A and
+ * data_realloc:A.
+ *
+ * Memory barrier involvement:
+ *
+ * If copy_data:A reads from data_alloc:B, then desc_read:E
+ * reads from desc_make_reusable:A.
+ *
+ * Relies on:
+ *
+ * MB from desc_make_reusable:A to data_alloc:B
+ * matching
+ * RMB from desc_read:C to desc_read:E
+ *
+ * Note: desc_make_reusable:A and data_alloc:B can be different
+ * CPUs. However, the data_alloc:B CPU (which performs the
+ * full memory barrier) must have previously seen
+ * desc_make_reusable:A.
+ */
+ smp_rmb(); /* LMM(desc_read:D) */
+
+ /*
+ * The data has been copied. Return the current descriptor state,
+ * which may have changed since the load above.
+ */
+ state_val = atomic_long_read(state_var); /* LMM(desc_read:E) */
+ d_state = get_desc_state(id, state_val);
+out:
+ atomic_long_set(&desc_out->state_var, state_val);
+ return d_state;
+}
+
+/*
+ * Take a specified descriptor out of the finalized state by attempting
+ * the transition from finalized to reusable. Either this context or some
+ * other context will have been successful.
+ */
+static void desc_make_reusable(struct prb_desc_ring *desc_ring,
+ unsigned long id)
+{
+ unsigned long val_finalized = DESC_SV(id, desc_finalized);
+ unsigned long val_reusable = DESC_SV(id, desc_reusable);
+ struct prb_desc *desc = to_desc(desc_ring, id);
+ atomic_long_t *state_var = &desc->state_var;
+
+ atomic_long_cmpxchg_relaxed(state_var, val_finalized,
+ val_reusable); /* LMM(desc_make_reusable:A) */
+}
+
+/*
+ * Given the text data ring, put the associated descriptor of each
+ * data block from @lpos_begin until @lpos_end into the reusable state.
+ *
+ * If there is any problem making the associated descriptor reusable, either
+ * the descriptor has not yet been finalized or another writer context has
+ * already pushed the tail lpos past the problematic data block. Regardless,
+ * on error the caller can re-load the tail lpos to determine the situation.
+ */
+static bool data_make_reusable(struct printk_ringbuffer *rb,
+ struct prb_data_ring *data_ring,
+ unsigned long lpos_begin,
+ unsigned long lpos_end,
+ unsigned long *lpos_out)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ struct prb_data_block *blk;
+ enum desc_state d_state;
+ struct prb_desc desc;
+ struct prb_data_blk_lpos *blk_lpos = &desc.text_blk_lpos;
+ unsigned long id;
+
+ /* Loop until @lpos_begin has advanced to or beyond @lpos_end. */
+ while ((lpos_end - lpos_begin) - 1 < DATA_SIZE(data_ring)) {
+ blk = to_block(data_ring, lpos_begin);
+
+ /*
+ * Load the block ID from the data block. This is a data race
+ * against a writer that may have newly reserved this data
+ * area. If the loaded value matches a valid descriptor ID,
+ * the blk_lpos of that descriptor will be checked to make
+ * sure it points back to this data block. If the check fails,
+ * the data area has been recycled by another writer.
+ */
+ id = blk->id; /* LMM(data_make_reusable:A) */
+
+ d_state = desc_read(desc_ring, id, &desc,
+ NULL, NULL); /* LMM(data_make_reusable:B) */
+
+ switch (d_state) {
+ case desc_miss:
+ case desc_reserved:
+ case desc_committed:
+ return false;
+ case desc_finalized:
+ /*
+ * This data block is invalid if the descriptor
+ * does not point back to it.
+ */
+ if (blk_lpos->begin != lpos_begin)
+ return false;
+ desc_make_reusable(desc_ring, id);
+ break;
+ case desc_reusable:
+ /*
+ * This data block is invalid if the descriptor
+ * does not point back to it.
+ */
+ if (blk_lpos->begin != lpos_begin)
+ return false;
+ break;
+ }
+
+ /* Advance @lpos_begin to the next data block. */
+ lpos_begin = blk_lpos->next;
+ }
+
+ *lpos_out = lpos_begin;
+ return true;
+}
+
+/*
+ * Advance the data ring tail to at least @lpos. This function puts
+ * descriptors into the reusable state if the tail is pushed beyond
+ * their associated data block.
+ */
+static bool data_push_tail(struct printk_ringbuffer *rb,
+ struct prb_data_ring *data_ring,
+ unsigned long lpos)
+{
+ unsigned long tail_lpos_new;
+ unsigned long tail_lpos;
+ unsigned long next_lpos;
+
+ /* If @lpos is from a data-less block, there is nothing to do. */
+ if (LPOS_DATALESS(lpos))
+ return true;
+
+ /*
+ * Any descriptor states that have transitioned to reusable due to the
+ * data tail being pushed to this loaded value will be visible to this
+ * CPU. This pairs with data_push_tail:D.
+ *
+ * Memory barrier involvement:
+ *
+ * If data_push_tail:A reads from data_push_tail:D, then this CPU can
+ * see desc_make_reusable:A.
+ *
+ * Relies on:
+ *
+ * MB from desc_make_reusable:A to data_push_tail:D
+ * matches
+ * READFROM from data_push_tail:D to data_push_tail:A
+ * thus
+ * READFROM from desc_make_reusable:A to this CPU
+ */
+ tail_lpos = atomic_long_read(&data_ring->tail_lpos); /* LMM(data_push_tail:A) */
+
+ /*
+ * Loop until the tail lpos is at or beyond @lpos. This condition
+ * may already be satisfied, resulting in no full memory barrier
+ * from data_push_tail:D being performed. However, since this CPU
+ * sees the new tail lpos, any descriptor states that transitioned to
+ * the reusable state must already be visible.
+ */
+ while ((lpos - tail_lpos) - 1 < DATA_SIZE(data_ring)) {
+ /*
+ * Make all descriptors reusable that are associated with
+ * data blocks before @lpos.
+ */
+ if (!data_make_reusable(rb, data_ring, tail_lpos, lpos,
+ &next_lpos)) {
+ /*
+ * 1. Guarantee the block ID loaded in
+ * data_make_reusable() is performed before
+ * reloading the tail lpos. The failed
+ * data_make_reusable() may be due to a newly
+ * recycled data area causing the tail lpos to
+ * have been previously pushed. This pairs with
+ * data_alloc:A and data_realloc:A.
+ *
+ * Memory barrier involvement:
+ *
+ * If data_make_reusable:A reads from data_alloc:B,
+ * then data_push_tail:C reads from
+ * data_push_tail:D.
+ *
+ * Relies on:
+ *
+ * MB from data_push_tail:D to data_alloc:B
+ * matching
+ * RMB from data_make_reusable:A to
+ * data_push_tail:C
+ *
+ * Note: data_push_tail:D and data_alloc:B can be
+ * different CPUs. However, the data_alloc:B
+ * CPU (which performs the full memory
+ * barrier) must have previously seen
+ * data_push_tail:D.
+ *
+ * 2. Guarantee the descriptor state loaded in
+ * data_make_reusable() is performed before
+ * reloading the tail lpos. The failed
+ * data_make_reusable() may be due to a newly
+ * recycled descriptor causing the tail lpos to
+ * have been previously pushed. This pairs with
+ * desc_reserve:D.
+ *
+ * Memory barrier involvement:
+ *
+ * If data_make_reusable:B reads from
+ * desc_reserve:F, then data_push_tail:C reads
+ * from data_push_tail:D.
+ *
+ * Relies on:
+ *
+ * MB from data_push_tail:D to desc_reserve:F
+ * matching
+ * RMB from data_make_reusable:B to
+ * data_push_tail:C
+ *
+ * Note: data_push_tail:D and desc_reserve:F can
+ * be different CPUs. However, the
+ * desc_reserve:F CPU (which performs the
+ * full memory barrier) must have previously
+ * seen data_push_tail:D.
+ */
+ smp_rmb(); /* LMM(data_push_tail:B) */
+
+ tail_lpos_new = atomic_long_read(&data_ring->tail_lpos
+ ); /* LMM(data_push_tail:C) */
+ if (tail_lpos_new == tail_lpos)
+ return false;
+
+ /* Another CPU pushed the tail. Try again. */
+ tail_lpos = tail_lpos_new;
+ continue;
+ }
+
+ /*
+ * Guarantee any descriptor states that have transitioned to
+ * reusable are stored before pushing the tail lpos. A full
+ * memory barrier is needed since other CPUs may have made
+ * the descriptor states reusable. This pairs with
+ * data_push_tail:A.
+ */
+ if (atomic_long_try_cmpxchg(&data_ring->tail_lpos, &tail_lpos,
+ next_lpos)) { /* LMM(data_push_tail:D) */
+ break;
+ }
+ }
+
+ return true;
+}
+
+/*
+ * Advance the desc ring tail. This function advances the tail by one
+ * descriptor, thus invalidating the oldest descriptor. Before advancing
+ * the tail, the tail descriptor is made reusable and all data blocks up to
+ * and including the descriptor's data block are invalidated (i.e. the data
+ * ring tail is pushed past the data block of the descriptor being made
+ * reusable).
+ */
+static bool desc_push_tail(struct printk_ringbuffer *rb,
+ unsigned long tail_id)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ enum desc_state d_state;
+ struct prb_desc desc;
+
+ d_state = desc_read(desc_ring, tail_id, &desc, NULL, NULL);
+
+ switch (d_state) {
+ case desc_miss:
+ /*
+ * If the ID is exactly 1 wrap behind the expected, it is
+ * in the process of being reserved by another writer and
+ * must be considered reserved.
+ */
+ if (DESC_ID(atomic_long_read(&desc.state_var)) ==
+ DESC_ID_PREV_WRAP(desc_ring, tail_id)) {
+ return false;
+ }
+
+ /*
+ * The ID has changed. Another writer must have pushed the
+ * tail and recycled the descriptor already. Success is
+ * returned because the caller is only interested in the
+ * specified tail being pushed, which it was.
+ */
+ return true;
+ case desc_reserved:
+ case desc_committed:
+ return false;
+ case desc_finalized:
+ desc_make_reusable(desc_ring, tail_id);
+ break;
+ case desc_reusable:
+ break;
+ }
+
+ /*
+ * Data blocks must be invalidated before their associated
+ * descriptor can be made available for recycling. Invalidating
+ * them later is not possible because there is no way to trust
+ * data blocks once their associated descriptor is gone.
+ */
+
+ if (!data_push_tail(rb, &rb->text_data_ring, desc.text_blk_lpos.next))
+ return false;
+
+ /*
+ * Check the next descriptor after @tail_id before pushing the tail
+ * to it because the tail must always be in a finalized or reusable
+ * state. The implementation of prb_first_seq() relies on this.
+ *
+ * A successful read implies that the next descriptor is less than or
+ * equal to @head_id so there is no risk of pushing the tail past the
+ * head.
+ */
+ d_state = desc_read(desc_ring, DESC_ID(tail_id + 1), &desc,
+ NULL, NULL); /* LMM(desc_push_tail:A) */
+
+ if (d_state == desc_finalized || d_state == desc_reusable) {
+ /*
+ * Guarantee any descriptor states that have transitioned to
+ * reusable are stored before pushing the tail ID. This allows
+ * verifying the recycled descriptor state. A full memory
+ * barrier is needed since other CPUs may have made the
+ * descriptor states reusable. This pairs with desc_reserve:D.
+ */
+ atomic_long_cmpxchg(&desc_ring->tail_id, tail_id,
+ DESC_ID(tail_id + 1)); /* LMM(desc_push_tail:B) */
+ } else {
+ /*
+ * Guarantee the last state load from desc_read() is before
+ * reloading @tail_id in order to see a new tail ID in the
+ * case that the descriptor has been recycled. This pairs
+ * with desc_reserve:D.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_push_tail:A reads from desc_reserve:F, then
+ * desc_push_tail:D reads from desc_push_tail:B.
+ *
+ * Relies on:
+ *
+ * MB from desc_push_tail:B to desc_reserve:F
+ * matching
+ * RMB from desc_push_tail:A to desc_push_tail:D
+ *
+ * Note: desc_push_tail:B and desc_reserve:F can be different
+ * CPUs. However, the desc_reserve:F CPU (which performs
+ * the full memory barrier) must have previously seen
+ * desc_push_tail:B.
+ */
+ smp_rmb(); /* LMM(desc_push_tail:C) */
+
+ /*
+ * Re-check the tail ID. The descriptor following @tail_id is
+ * not in an allowed tail state. But if the tail has since
+ * been moved by another CPU, then it does not matter.
+ */
+ if (atomic_long_read(&desc_ring->tail_id) == tail_id) /* LMM(desc_push_tail:D) */
+ return false;
+ }
+
+ return true;
+}
+
+/* Reserve a new descriptor, invalidating the oldest if necessary. */
+static bool desc_reserve(struct printk_ringbuffer *rb, unsigned long *id_out)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ unsigned long prev_state_val;
+ unsigned long id_prev_wrap;
+ struct prb_desc *desc;
+ unsigned long head_id;
+ unsigned long id;
+
+ head_id = atomic_long_read(&desc_ring->head_id); /* LMM(desc_reserve:A) */
+
+ do {
+ desc = to_desc(desc_ring, head_id);
+
+ id = DESC_ID(head_id + 1);
+ id_prev_wrap = DESC_ID_PREV_WRAP(desc_ring, id);
+
+ /*
+ * Guarantee the head ID is read before reading the tail ID.
+ * Since the tail ID is updated before the head ID, this
+ * guarantees that @id_prev_wrap is never ahead of the tail
+ * ID. This pairs with desc_reserve:D.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_reserve:A reads from desc_reserve:D, then
+ * desc_reserve:C reads from desc_push_tail:B.
+ *
+ * Relies on:
+ *
+ * MB from desc_push_tail:B to desc_reserve:D
+ * matching
+ * RMB from desc_reserve:A to desc_reserve:C
+ *
+ * Note: desc_push_tail:B and desc_reserve:D can be different
+ * CPUs. However, the desc_reserve:D CPU (which performs
+ * the full memory barrier) must have previously seen
+ * desc_push_tail:B.
+ */
+ smp_rmb(); /* LMM(desc_reserve:B) */
+
+ if (id_prev_wrap == atomic_long_read(&desc_ring->tail_id
+ )) { /* LMM(desc_reserve:C) */
+ /*
+ * Make space for the new descriptor by
+ * advancing the tail.
+ */
+ if (!desc_push_tail(rb, id_prev_wrap))
+ return false;
+ }
+
+ /*
+ * 1. Guarantee the tail ID is read before validating the
+ * recycled descriptor state. A read memory barrier is
+ * sufficient for this. This pairs with desc_push_tail:B.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_reserve:C reads from desc_push_tail:B, then
+ * desc_reserve:E reads from desc_make_reusable:A.
+ *
+ * Relies on:
+ *
+ * MB from desc_make_reusable:A to desc_push_tail:B
+ * matching
+ * RMB from desc_reserve:C to desc_reserve:E
+ *
+ * Note: desc_make_reusable:A and desc_push_tail:B can be
+ * different CPUs. However, the desc_push_tail:B CPU
+ * (which performs the full memory barrier) must have
+ * previously seen desc_make_reusable:A.
+ *
+ * 2. Guarantee the tail ID is stored before storing the head
+ * ID. This pairs with desc_reserve:B.
+ *
+ * 3. Guarantee any data ring tail changes are stored before
+ * recycling the descriptor. Data ring tail changes can
+ * happen via desc_push_tail()->data_push_tail(). A full
+ * memory barrier is needed since another CPU may have
+ * pushed the data ring tails. This pairs with
+ * data_push_tail:B.
+ *
+ * 4. Guarantee a new tail ID is stored before recycling the
+ * descriptor. A full memory barrier is needed since
+ * another CPU may have pushed the tail ID. This pairs
+ * with desc_push_tail:C and this also pairs with
+ * prb_first_seq:C.
+ *
+ * 5. Guarantee the head ID is stored before trying to
+ * finalize the previous descriptor. This pairs with
+ * _prb_commit:B.
+ */
+ } while (!atomic_long_try_cmpxchg(&desc_ring->head_id, &head_id,
+ id)); /* LMM(desc_reserve:D) */
+
+ desc = to_desc(desc_ring, id);
+
+ /*
+ * If the descriptor has been recycled, verify the old state val.
+ * See "ABA Issues" about why this verification is performed.
+ */
+ prev_state_val = atomic_long_read(&desc->state_var); /* LMM(desc_reserve:E) */
+ if (prev_state_val &&
+ get_desc_state(id_prev_wrap, prev_state_val) != desc_reusable) {
+ WARN_ON_ONCE(1);
+ return false;
+ }
+
+ /*
+ * Assign the descriptor a new ID and set its state to reserved.
+ * See "ABA Issues" about why cmpxchg() instead of set() is used.
+ *
+ * Guarantee the new descriptor ID and state is stored before making
+ * any other changes. A write memory barrier is sufficient for this.
+ * This pairs with desc_read:D.
+ */
+ if (!atomic_long_try_cmpxchg(&desc->state_var, &prev_state_val,
+ DESC_SV(id, desc_reserved))) { /* LMM(desc_reserve:F) */
+ WARN_ON_ONCE(1);
+ return false;
+ }
+
+ /* Now data in @desc can be modified: LMM(desc_reserve:G) */
+
+ *id_out = id;
+ return true;
+}
+
+/* Determine the end of a data block. */
+static unsigned long get_next_lpos(struct prb_data_ring *data_ring,
+ unsigned long lpos, unsigned int size)
+{
+ unsigned long begin_lpos;
+ unsigned long next_lpos;
+
+ begin_lpos = lpos;
+ next_lpos = lpos + size;
+
+ /* First check if the data block does not wrap. */
+ if (DATA_WRAPS(data_ring, begin_lpos) == DATA_WRAPS(data_ring, next_lpos))
+ return next_lpos;
+
+ /* Wrapping data blocks store their data at the beginning. */
+ return (DATA_THIS_WRAP_START_LPOS(data_ring, next_lpos) + size);
+}
+
+/*
+ * Allocate a new data block, invalidating the oldest data block(s)
+ * if necessary. This function also associates the data block with
+ * a specified descriptor.
+ */
+static char *data_alloc(struct printk_ringbuffer *rb,
+ struct prb_data_ring *data_ring, unsigned int size,
+ struct prb_data_blk_lpos *blk_lpos, unsigned long id)
+{
+ struct prb_data_block *blk;
+ unsigned long begin_lpos;
+ unsigned long next_lpos;
+
+ if (size == 0) {
+ /* Specify a data-less block. */
+ blk_lpos->begin = NO_LPOS;
+ blk_lpos->next = NO_LPOS;
+ return NULL;
+ }
+
+ size = to_blk_size(size);
+
+ begin_lpos = atomic_long_read(&data_ring->head_lpos);
+
+ do {
+ next_lpos = get_next_lpos(data_ring, begin_lpos, size);
+
+ if (!data_push_tail(rb, data_ring, next_lpos - DATA_SIZE(data_ring))) {
+ /* Failed to allocate, specify a data-less block. */
+ blk_lpos->begin = FAILED_LPOS;
+ blk_lpos->next = FAILED_LPOS;
+ return NULL;
+ }
+
+ /*
+ * 1. Guarantee any descriptor states that have transitioned
+ * to reusable are stored before modifying the newly
+ * allocated data area. A full memory barrier is needed
+ * since other CPUs may have made the descriptor states
+ * reusable. See data_push_tail:A about why the reusable
+ * states are visible. This pairs with desc_read:D.
+ *
+ * 2. Guarantee any updated tail lpos is stored before
+ * modifying the newly allocated data area. Another CPU may
+ * be in data_make_reusable() and is reading a block ID
+ * from this area. data_make_reusable() can handle reading
+ * a garbage block ID value, but then it must be able to
+ * load a new tail lpos. A full memory barrier is needed
+ * since other CPUs may have updated the tail lpos. This
+ * pairs with data_push_tail:B.
+ */
+ } while (!atomic_long_try_cmpxchg(&data_ring->head_lpos, &begin_lpos,
+ next_lpos)); /* LMM(data_alloc:A) */
+
+ blk = to_block(data_ring, begin_lpos);
+ blk->id = id; /* LMM(data_alloc:B) */
+
+ if (DATA_WRAPS(data_ring, begin_lpos) != DATA_WRAPS(data_ring, next_lpos)) {
+ /* Wrapping data blocks store their data at the beginning. */
+ blk = to_block(data_ring, 0);
+
+ /*
+ * Store the ID on the wrapped block for consistency.
+ * The printk_ringbuffer does not actually use it.
+ */
+ blk->id = id;
+ }
+
+ blk_lpos->begin = begin_lpos;
+ blk_lpos->next = next_lpos;
+
+ return &blk->data[0];
+}
+
+/*
+ * Try to resize an existing data block associated with the descriptor
+ * specified by @id. If the resized data block should become wrapped, it
+ * copies the old data to the new data block. If @size yields a data block
+ * with the same or less size, the data block is left as is.
+ *
+ * Fail if this is not the last allocated data block or if there is not
+ * enough space or it is not possible make enough space.
+ *
+ * Return a pointer to the beginning of the entire data buffer or NULL on
+ * failure.
+ */
+static char *data_realloc(struct printk_ringbuffer *rb,
+ struct prb_data_ring *data_ring, unsigned int size,
+ struct prb_data_blk_lpos *blk_lpos, unsigned long id)
+{
+ struct prb_data_block *blk;
+ unsigned long head_lpos;
+ unsigned long next_lpos;
+ bool wrapped;
+
+ /* Reallocation only works if @blk_lpos is the newest data block. */
+ head_lpos = atomic_long_read(&data_ring->head_lpos);
+ if (head_lpos != blk_lpos->next)
+ return NULL;
+
+ /* Keep track if @blk_lpos was a wrapping data block. */
+ wrapped = (DATA_WRAPS(data_ring, blk_lpos->begin) != DATA_WRAPS(data_ring, blk_lpos->next));
+
+ size = to_blk_size(size);
+
+ next_lpos = get_next_lpos(data_ring, blk_lpos->begin, size);
+
+ /* If the data block does not increase, there is nothing to do. */
+ if (head_lpos - next_lpos < DATA_SIZE(data_ring)) {
+ blk = to_block(data_ring, blk_lpos->begin);
+ return &blk->data[0];
+ }
+
+ if (!data_push_tail(rb, data_ring, next_lpos - DATA_SIZE(data_ring)))
+ return NULL;
+
+ /* The memory barrier involvement is the same as data_alloc:A. */
+ if (!atomic_long_try_cmpxchg(&data_ring->head_lpos, &head_lpos,
+ next_lpos)) { /* LMM(data_realloc:A) */
+ return NULL;
+ }
+
+ blk = to_block(data_ring, blk_lpos->begin);
+
+ if (DATA_WRAPS(data_ring, blk_lpos->begin) != DATA_WRAPS(data_ring, next_lpos)) {
+ struct prb_data_block *old_blk = blk;
+
+ /* Wrapping data blocks store their data at the beginning. */
+ blk = to_block(data_ring, 0);
+
+ /*
+ * Store the ID on the wrapped block for consistency.
+ * The printk_ringbuffer does not actually use it.
+ */
+ blk->id = id;
+
+ if (!wrapped) {
+ /*
+ * Since the allocated space is now in the newly
+ * created wrapping data block, copy the content
+ * from the old data block.
+ */
+ memcpy(&blk->data[0], &old_blk->data[0],
+ (blk_lpos->next - blk_lpos->begin) - sizeof(blk->id));
+ }
+ }
+
+ blk_lpos->next = next_lpos;
+
+ return &blk->data[0];
+}
+
+/* Return the number of bytes used by a data block. */
+static unsigned int space_used(struct prb_data_ring *data_ring,
+ struct prb_data_blk_lpos *blk_lpos)
+{
+ /* Data-less blocks take no space. */
+ if (BLK_DATALESS(blk_lpos))
+ return 0;
+
+ if (DATA_WRAPS(data_ring, blk_lpos->begin) == DATA_WRAPS(data_ring, blk_lpos->next)) {
+ /* Data block does not wrap. */
+ return (DATA_INDEX(data_ring, blk_lpos->next) -
+ DATA_INDEX(data_ring, blk_lpos->begin));
+ }
+
+ /*
+ * For wrapping data blocks, the trailing (wasted) space is
+ * also counted.
+ */
+ return (DATA_INDEX(data_ring, blk_lpos->next) +
+ DATA_SIZE(data_ring) - DATA_INDEX(data_ring, blk_lpos->begin));
+}
+
+/*
+ * Given @blk_lpos, return a pointer to the writer data from the data block
+ * and calculate the size of the data part. A NULL pointer is returned if
+ * @blk_lpos specifies values that could never be legal.
+ *
+ * This function (used by readers) performs strict validation on the lpos
+ * values to possibly detect bugs in the writer code. A WARN_ON_ONCE() is
+ * triggered if an internal error is detected.
+ */
+static const char *get_data(struct prb_data_ring *data_ring,
+ struct prb_data_blk_lpos *blk_lpos,
+ unsigned int *data_size)
+{
+ struct prb_data_block *db;
+
+ /* Data-less data block description. */
+ if (BLK_DATALESS(blk_lpos)) {
+ if (blk_lpos->begin == NO_LPOS && blk_lpos->next == NO_LPOS) {
+ *data_size = 0;
+ return "";
+ }
+ return NULL;
+ }
+
+ /* Regular data block: @begin less than @next and in same wrap. */
+ if (DATA_WRAPS(data_ring, blk_lpos->begin) == DATA_WRAPS(data_ring, blk_lpos->next) &&
+ blk_lpos->begin < blk_lpos->next) {
+ db = to_block(data_ring, blk_lpos->begin);
+ *data_size = blk_lpos->next - blk_lpos->begin;
+
+ /* Wrapping data block: @begin is one wrap behind @next. */
+ } else if (DATA_WRAPS(data_ring, blk_lpos->begin + DATA_SIZE(data_ring)) ==
+ DATA_WRAPS(data_ring, blk_lpos->next)) {
+ db = to_block(data_ring, 0);
+ *data_size = DATA_INDEX(data_ring, blk_lpos->next);
+
+ /* Illegal block description. */
+ } else {
+ WARN_ON_ONCE(1);
+ return NULL;
+ }
+
+ /* A valid data block will always be aligned to the ID size. */
+ if (WARN_ON_ONCE(blk_lpos->begin != ALIGN(blk_lpos->begin, sizeof(db->id))) ||
+ WARN_ON_ONCE(blk_lpos->next != ALIGN(blk_lpos->next, sizeof(db->id)))) {
+ return NULL;
+ }
+
+ /* A valid data block will always have at least an ID. */
+ if (WARN_ON_ONCE(*data_size < sizeof(db->id)))
+ return NULL;
+
+ /* Subtract block ID space from size to reflect data size. */
+ *data_size -= sizeof(db->id);
+
+ return &db->data[0];
+}
+
+/*
+ * Attempt to transition the newest descriptor from committed back to reserved
+ * so that the record can be modified by a writer again. This is only possible
+ * if the descriptor is not yet finalized and the provided @caller_id matches.
+ */
+static struct prb_desc *desc_reopen_last(struct prb_desc_ring *desc_ring,
+ u32 caller_id, unsigned long *id_out)
+{
+ unsigned long prev_state_val;
+ enum desc_state d_state;
+ struct prb_desc desc;
+ struct prb_desc *d;
+ unsigned long id;
+ u32 cid;
+
+ id = atomic_long_read(&desc_ring->head_id);
+
+ /*
+ * To reduce unnecessarily reopening, first check if the descriptor
+ * state and caller ID are correct.
+ */
+ d_state = desc_read(desc_ring, id, &desc, NULL, &cid);
+ if (d_state != desc_committed || cid != caller_id)
+ return NULL;
+
+ d = to_desc(desc_ring, id);
+
+ prev_state_val = DESC_SV(id, desc_committed);
+
+ /*
+ * Guarantee the reserved state is stored before reading any
+ * record data. A full memory barrier is needed because @state_var
+ * modification is followed by reading. This pairs with _prb_commit:B.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_reopen_last:A reads from _prb_commit:B, then
+ * prb_reserve_in_last:A reads from _prb_commit:A.
+ *
+ * Relies on:
+ *
+ * WMB from _prb_commit:A to _prb_commit:B
+ * matching
+ * MB If desc_reopen_last:A to prb_reserve_in_last:A
+ */
+ if (!atomic_long_try_cmpxchg(&d->state_var, &prev_state_val,
+ DESC_SV(id, desc_reserved))) { /* LMM(desc_reopen_last:A) */
+ return NULL;
+ }
+
+ *id_out = id;
+ return d;
+}
+
+/**
+ * prb_reserve_in_last() - Re-reserve and extend the space in the ringbuffer
+ * used by the newest record.
+ *
+ * @e: The entry structure to setup.
+ * @rb: The ringbuffer to re-reserve and extend data in.
+ * @r: The record structure to allocate buffers for.
+ * @caller_id: The caller ID of the caller (reserving writer).
+ * @max_size: Fail if the extended size would be greater than this.
+ *
+ * This is the public function available to writers to re-reserve and extend
+ * data.
+ *
+ * The writer specifies the text size to extend (not the new total size) by
+ * setting the @text_buf_size field of @r. To ensure proper initialization
+ * of @r, prb_rec_init_wr() should be used.
+ *
+ * This function will fail if @caller_id does not match the caller ID of the
+ * newest record. In that case the caller must reserve new data using
+ * prb_reserve().
+ *
+ * Context: Any context. Disables local interrupts on success.
+ * Return: true if text data could be extended, otherwise false.
+ *
+ * On success:
+ *
+ * - @r->text_buf points to the beginning of the entire text buffer.
+ *
+ * - @r->text_buf_size is set to the new total size of the buffer.
+ *
+ * - @r->info is not touched so that @r->info->text_len could be used
+ * to append the text.
+ *
+ * - prb_record_text_space() can be used on @e to query the new
+ * actually used space.
+ *
+ * Important: All @r->info fields will already be set with the current values
+ * for the record. I.e. @r->info->text_len will be less than
+ * @text_buf_size. Writers can use @r->info->text_len to know
+ * where concatenation begins and writers should update
+ * @r->info->text_len after concatenating.
+ */
+bool prb_reserve_in_last(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
+ struct printk_record *r, u32 caller_id, unsigned int max_size)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ struct printk_info *info;
+ unsigned int data_size;
+ struct prb_desc *d;
+ unsigned long id;
+
+ local_irq_save(e->irqflags);
+
+ /* Transition the newest descriptor back to the reserved state. */
+ d = desc_reopen_last(desc_ring, caller_id, &id);
+ if (!d) {
+ local_irq_restore(e->irqflags);
+ goto fail_reopen;
+ }
+
+ /* Now the writer has exclusive access: LMM(prb_reserve_in_last:A) */
+
+ info = to_info(desc_ring, id);
+
+ /*
+ * Set the @e fields here so that prb_commit() can be used if
+ * anything fails from now on.
+ */
+ e->rb = rb;
+ e->id = id;
+
+ /*
+ * desc_reopen_last() checked the caller_id, but there was no
+ * exclusive access at that point. The descriptor may have
+ * changed since then.
+ */
+ if (caller_id != info->caller_id)
+ goto fail;
+
+ if (BLK_DATALESS(&d->text_blk_lpos)) {
+ if (WARN_ON_ONCE(info->text_len != 0)) {
+ pr_warn_once("wrong text_len value (%hu, expecting 0)\n",
+ info->text_len);
+ info->text_len = 0;
+ }
+
+ if (!data_check_size(&rb->text_data_ring, r->text_buf_size))
+ goto fail;
+
+ if (r->text_buf_size > max_size)
+ goto fail;
+
+ r->text_buf = data_alloc(rb, &rb->text_data_ring, r->text_buf_size,
+ &d->text_blk_lpos, id);
+ } else {
+ if (!get_data(&rb->text_data_ring, &d->text_blk_lpos, &data_size))
+ goto fail;
+
+ /*
+ * Increase the buffer size to include the original size. If
+ * the meta data (@text_len) is not sane, use the full data
+ * block size.
+ */
+ if (WARN_ON_ONCE(info->text_len > data_size)) {
+ pr_warn_once("wrong text_len value (%hu, expecting <=%u)\n",
+ info->text_len, data_size);
+ info->text_len = data_size;
+ }
+ r->text_buf_size += info->text_len;
+
+ if (!data_check_size(&rb->text_data_ring, r->text_buf_size))
+ goto fail;
+
+ if (r->text_buf_size > max_size)
+ goto fail;
+
+ r->text_buf = data_realloc(rb, &rb->text_data_ring, r->text_buf_size,
+ &d->text_blk_lpos, id);
+ }
+ if (r->text_buf_size && !r->text_buf)
+ goto fail;
+
+ r->info = info;
+
+ e->text_space = space_used(&rb->text_data_ring, &d->text_blk_lpos);
+
+ return true;
+fail:
+ prb_commit(e);
+ /* prb_commit() re-enabled interrupts. */
+fail_reopen:
+ /* Make it clear to the caller that the re-reserve failed. */
+ memset(r, 0, sizeof(*r));
+ return false;
+}
+
+/*
+ * Attempt to finalize a specified descriptor. If this fails, the descriptor
+ * is either already final or it will finalize itself when the writer commits.
+ */
+static void desc_make_final(struct prb_desc_ring *desc_ring, unsigned long id)
+{
+ unsigned long prev_state_val = DESC_SV(id, desc_committed);
+ struct prb_desc *d = to_desc(desc_ring, id);
+
+ atomic_long_cmpxchg_relaxed(&d->state_var, prev_state_val,
+ DESC_SV(id, desc_finalized)); /* LMM(desc_make_final:A) */
+}
+
+/**
+ * prb_reserve() - Reserve space in the ringbuffer.
+ *
+ * @e: The entry structure to setup.
+ * @rb: The ringbuffer to reserve data in.
+ * @r: The record structure to allocate buffers for.
+ *
+ * This is the public function available to writers to reserve data.
+ *
+ * The writer specifies the text size to reserve by setting the
+ * @text_buf_size field of @r. To ensure proper initialization of @r,
+ * prb_rec_init_wr() should be used.
+ *
+ * Context: Any context. Disables local interrupts on success.
+ * Return: true if at least text data could be allocated, otherwise false.
+ *
+ * On success, the fields @info and @text_buf of @r will be set by this
+ * function and should be filled in by the writer before committing. Also
+ * on success, prb_record_text_space() can be used on @e to query the actual
+ * space used for the text data block.
+ *
+ * Important: @info->text_len needs to be set correctly by the writer in
+ * order for data to be readable and/or extended. Its value
+ * is initialized to 0.
+ */
+bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
+ struct printk_record *r)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ struct printk_info *info;
+ struct prb_desc *d;
+ unsigned long id;
+ u64 seq;
+
+ if (!data_check_size(&rb->text_data_ring, r->text_buf_size))
+ goto fail;
+
+ /*
+ * Descriptors in the reserved state act as blockers to all further
+ * reservations once the desc_ring has fully wrapped. Disable
+ * interrupts during the reserve/commit window in order to minimize
+ * the likelihood of this happening.
+ */
+ local_irq_save(e->irqflags);
+
+ if (!desc_reserve(rb, &id)) {
+ /* Descriptor reservation failures are tracked. */
+ atomic_long_inc(&rb->fail);
+ local_irq_restore(e->irqflags);
+ goto fail;
+ }
+
+ d = to_desc(desc_ring, id);
+ info = to_info(desc_ring, id);
+
+ /*
+ * All @info fields (except @seq) are cleared and must be filled in
+ * by the writer. Save @seq before clearing because it is used to
+ * determine the new sequence number.
+ */
+ seq = info->seq;
+ memset(info, 0, sizeof(*info));
+
+ /*
+ * Set the @e fields here so that prb_commit() can be used if
+ * text data allocation fails.
+ */
+ e->rb = rb;
+ e->id = id;
+
+ /*
+ * Initialize the sequence number if it has "never been set".
+ * Otherwise just increment it by a full wrap.
+ *
+ * @seq is considered "never been set" if it has a value of 0,
+ * _except_ for @infos[0], which was specially setup by the ringbuffer
+ * initializer and therefore is always considered as set.
+ *
+ * See the "Bootstrap" comment block in printk_ringbuffer.h for
+ * details about how the initializer bootstraps the descriptors.
+ */
+ if (seq == 0 && DESC_INDEX(desc_ring, id) != 0)
+ info->seq = DESC_INDEX(desc_ring, id);
+ else
+ info->seq = seq + DESCS_COUNT(desc_ring);
+
+ /*
+ * New data is about to be reserved. Once that happens, previous
+ * descriptors are no longer able to be extended. Finalize the
+ * previous descriptor now so that it can be made available to
+ * readers. (For seq==0 there is no previous descriptor.)
+ */
+ if (info->seq > 0)
+ desc_make_final(desc_ring, DESC_ID(id - 1));
+
+ r->text_buf = data_alloc(rb, &rb->text_data_ring, r->text_buf_size,
+ &d->text_blk_lpos, id);
+ /* If text data allocation fails, a data-less record is committed. */
+ if (r->text_buf_size && !r->text_buf) {
+ prb_commit(e);
+ /* prb_commit() re-enabled interrupts. */
+ goto fail;
+ }
+
+ r->info = info;
+
+ /* Record full text space used by record. */
+ e->text_space = space_used(&rb->text_data_ring, &d->text_blk_lpos);
+
+ return true;
+fail:
+ /* Make it clear to the caller that the reserve failed. */
+ memset(r, 0, sizeof(*r));
+ return false;
+}
+
+/* Commit the data (possibly finalizing it) and restore interrupts. */
+static void _prb_commit(struct prb_reserved_entry *e, unsigned long state_val)
+{
+ struct prb_desc_ring *desc_ring = &e->rb->desc_ring;
+ struct prb_desc *d = to_desc(desc_ring, e->id);
+ unsigned long prev_state_val = DESC_SV(e->id, desc_reserved);
+
+ /* Now the writer has finished all writing: LMM(_prb_commit:A) */
+
+ /*
+ * Set the descriptor as committed. See "ABA Issues" about why
+ * cmpxchg() instead of set() is used.
+ *
+ * 1 Guarantee all record data is stored before the descriptor state
+ * is stored as committed. A write memory barrier is sufficient
+ * for this. This pairs with desc_read:B and desc_reopen_last:A.
+ *
+ * 2. Guarantee the descriptor state is stored as committed before
+ * re-checking the head ID in order to possibly finalize this
+ * descriptor. This pairs with desc_reserve:D.
+ *
+ * Memory barrier involvement:
+ *
+ * If prb_commit:A reads from desc_reserve:D, then
+ * desc_make_final:A reads from _prb_commit:B.
+ *
+ * Relies on:
+ *
+ * MB _prb_commit:B to prb_commit:A
+ * matching
+ * MB desc_reserve:D to desc_make_final:A
+ */
+ if (!atomic_long_try_cmpxchg(&d->state_var, &prev_state_val,
+ DESC_SV(e->id, state_val))) { /* LMM(_prb_commit:B) */
+ WARN_ON_ONCE(1);
+ }
+
+ /* Restore interrupts, the reserve/commit window is finished. */
+ local_irq_restore(e->irqflags);
+}
+
+/**
+ * prb_commit() - Commit (previously reserved) data to the ringbuffer.
+ *
+ * @e: The entry containing the reserved data information.
+ *
+ * This is the public function available to writers to commit data.
+ *
+ * Note that the data is not yet available to readers until it is finalized.
+ * Finalizing happens automatically when space for the next record is
+ * reserved.
+ *
+ * See prb_final_commit() for a version of this function that finalizes
+ * immediately.
+ *
+ * Context: Any context. Enables local interrupts.
+ */
+void prb_commit(struct prb_reserved_entry *e)
+{
+ struct prb_desc_ring *desc_ring = &e->rb->desc_ring;
+ unsigned long head_id;
+
+ _prb_commit(e, desc_committed);
+
+ /*
+ * If this descriptor is no longer the head (i.e. a new record has
+ * been allocated), extending the data for this record is no longer
+ * allowed and therefore it must be finalized.
+ */
+ head_id = atomic_long_read(&desc_ring->head_id); /* LMM(prb_commit:A) */
+ if (head_id != e->id)
+ desc_make_final(desc_ring, e->id);
+}
+
+/**
+ * prb_final_commit() - Commit and finalize (previously reserved) data to
+ * the ringbuffer.
+ *
+ * @e: The entry containing the reserved data information.
+ *
+ * This is the public function available to writers to commit+finalize data.
+ *
+ * By finalizing, the data is made immediately available to readers.
+ *
+ * This function should only be used if there are no intentions of extending
+ * this data using prb_reserve_in_last().
+ *
+ * Context: Any context. Enables local interrupts.
+ */
+void prb_final_commit(struct prb_reserved_entry *e)
+{
+ _prb_commit(e, desc_finalized);
+}
+
+/*
+ * Count the number of lines in provided text. All text has at least 1 line
+ * (even if @text_size is 0). Each '\n' processed is counted as an additional
+ * line.
+ */
+static unsigned int count_lines(const char *text, unsigned int text_size)
+{
+ unsigned int next_size = text_size;
+ unsigned int line_count = 1;
+ const char *next = text;
+
+ while (next_size) {
+ next = memchr(next, '\n', next_size);
+ if (!next)
+ break;
+ line_count++;
+ next++;
+ next_size = text_size - (next - text);
+ }
+
+ return line_count;
+}
+
+/*
+ * Given @blk_lpos, copy an expected @len of data into the provided buffer.
+ * If @line_count is provided, count the number of lines in the data.
+ *
+ * This function (used by readers) performs strict validation on the data
+ * size to possibly detect bugs in the writer code. A WARN_ON_ONCE() is
+ * triggered if an internal error is detected.
+ */
+static bool copy_data(struct prb_data_ring *data_ring,
+ struct prb_data_blk_lpos *blk_lpos, u16 len, char *buf,
+ unsigned int buf_size, unsigned int *line_count)
+{
+ unsigned int data_size;
+ const char *data;
+
+ /* Caller might not want any data. */
+ if ((!buf || !buf_size) && !line_count)
+ return true;
+
+ data = get_data(data_ring, blk_lpos, &data_size);
+ if (!data)
+ return false;
+
+ /*
+ * Actual cannot be less than expected. It can be more than expected
+ * because of the trailing alignment padding.
+ *
+ * Note that invalid @len values can occur because the caller loads
+ * the value during an allowed data race.
+ */
+ if (data_size < (unsigned int)len)
+ return false;
+
+ /* Caller interested in the line count? */
+ if (line_count)
+ *line_count = count_lines(data, data_size);
+
+ /* Caller interested in the data content? */
+ if (!buf || !buf_size)
+ return true;
+
+ data_size = min_t(u16, buf_size, len);
+
+ memcpy(&buf[0], data, data_size); /* LMM(copy_data:A) */
+ return true;
+}
+
+/*
+ * This is an extended version of desc_read(). It gets a copy of a specified
+ * descriptor. However, it also verifies that the record is finalized and has
+ * the sequence number @seq. On success, 0 is returned.
+ *
+ * Error return values:
+ * -EINVAL: A finalized record with sequence number @seq does not exist.
+ * -ENOENT: A finalized record with sequence number @seq exists, but its data
+ * is not available. This is a valid record, so readers should
+ * continue with the next record.
+ */
+static int desc_read_finalized_seq(struct prb_desc_ring *desc_ring,
+ unsigned long id, u64 seq,
+ struct prb_desc *desc_out)
+{
+ struct prb_data_blk_lpos *blk_lpos = &desc_out->text_blk_lpos;
+ enum desc_state d_state;
+ u64 s;
+
+ d_state = desc_read(desc_ring, id, desc_out, &s, NULL);
+
+ /*
+ * An unexpected @id (desc_miss) or @seq mismatch means the record
+ * does not exist. A descriptor in the reserved or committed state
+ * means the record does not yet exist for the reader.
+ */
+ if (d_state == desc_miss ||
+ d_state == desc_reserved ||
+ d_state == desc_committed ||
+ s != seq) {
+ return -EINVAL;
+ }
+
+ /*
+ * A descriptor in the reusable state may no longer have its data
+ * available; report it as existing but with lost data. Or the record
+ * may actually be a record with lost data.
+ */
+ if (d_state == desc_reusable ||
+ (blk_lpos->begin == FAILED_LPOS && blk_lpos->next == FAILED_LPOS)) {
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+/*
+ * Copy the ringbuffer data from the record with @seq to the provided
+ * @r buffer. On success, 0 is returned.
+ *
+ * See desc_read_finalized_seq() for error return values.
+ */
+static int prb_read(struct printk_ringbuffer *rb, u64 seq,
+ struct printk_record *r, unsigned int *line_count)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ struct printk_info *info = to_info(desc_ring, seq);
+ struct prb_desc *rdesc = to_desc(desc_ring, seq);
+ atomic_long_t *state_var = &rdesc->state_var;
+ struct prb_desc desc;
+ unsigned long id;
+ int err;
+
+ /* Extract the ID, used to specify the descriptor to read. */
+ id = DESC_ID(atomic_long_read(state_var));
+
+ /* Get a local copy of the correct descriptor (if available). */
+ err = desc_read_finalized_seq(desc_ring, id, seq, &desc);
+
+ /*
+ * If @r is NULL, the caller is only interested in the availability
+ * of the record.
+ */
+ if (err || !r)
+ return err;
+
+ /* If requested, copy meta data. */
+ if (r->info)
+ memcpy(r->info, info, sizeof(*(r->info)));
+
+ /* Copy text data. If it fails, this is a data-less record. */
+ if (!copy_data(&rb->text_data_ring, &desc.text_blk_lpos, info->text_len,
+ r->text_buf, r->text_buf_size, line_count)) {
+ return -ENOENT;
+ }
+
+ /* Ensure the record is still finalized and has the same @seq. */
+ return desc_read_finalized_seq(desc_ring, id, seq, &desc);
+}
+
+/* Get the sequence number of the tail descriptor. */
+static u64 prb_first_seq(struct printk_ringbuffer *rb)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ enum desc_state d_state;
+ struct prb_desc desc;
+ unsigned long id;
+ u64 seq;
+
+ for (;;) {
+ id = atomic_long_read(&rb->desc_ring.tail_id); /* LMM(prb_first_seq:A) */
+
+ d_state = desc_read(desc_ring, id, &desc, &seq, NULL); /* LMM(prb_first_seq:B) */
+
+ /*
+ * This loop will not be infinite because the tail is
+ * _always_ in the finalized or reusable state.
+ */
+ if (d_state == desc_finalized || d_state == desc_reusable)
+ break;
+
+ /*
+ * Guarantee the last state load from desc_read() is before
+ * reloading @tail_id in order to see a new tail in the case
+ * that the descriptor has been recycled. This pairs with
+ * desc_reserve:D.
+ *
+ * Memory barrier involvement:
+ *
+ * If prb_first_seq:B reads from desc_reserve:F, then
+ * prb_first_seq:A reads from desc_push_tail:B.
+ *
+ * Relies on:
+ *
+ * MB from desc_push_tail:B to desc_reserve:F
+ * matching
+ * RMB prb_first_seq:B to prb_first_seq:A
+ */
+ smp_rmb(); /* LMM(prb_first_seq:C) */
+ }
+
+ return seq;
+}
+
+/*
+ * Non-blocking read of a record. Updates @seq to the last finalized record
+ * (which may have no data available).
+ *
+ * See the description of prb_read_valid() and prb_read_valid_info()
+ * for details.
+ */
+static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
+ struct printk_record *r, unsigned int *line_count)
+{
+ u64 tail_seq;
+ int err;
+
+ while ((err = prb_read(rb, *seq, r, line_count))) {
+ tail_seq = prb_first_seq(rb);
+
+ if (*seq < tail_seq) {
+ /*
+ * Behind the tail. Catch up and try again. This
+ * can happen for -ENOENT and -EINVAL cases.
+ */
+ *seq = tail_seq;
+
+ } else if (err == -ENOENT) {
+ /* Record exists, but no data available. Skip. */
+ (*seq)++;
+
+ } else {
+ /* Non-existent/non-finalized record. Must stop. */
+ return false;
+ }
+ }
+
+ return true;
+}
+
+/**
+ * prb_read_valid() - Non-blocking read of a requested record or (if gone)
+ * the next available record.
+ *
+ * @rb: The ringbuffer to read from.
+ * @seq: The sequence number of the record to read.
+ * @r: A record data buffer to store the read record to.
+ *
+ * This is the public function available to readers to read a record.
+ *
+ * The reader provides the @info and @text_buf buffers of @r to be
+ * filled in. Any of the buffer pointers can be set to NULL if the reader
+ * is not interested in that data. To ensure proper initialization of @r,
+ * prb_rec_init_rd() should be used.
+ *
+ * Context: Any context.
+ * Return: true if a record was read, otherwise false.
+ *
+ * On success, the reader must check r->info.seq to see which record was
+ * actually read. This allows the reader to detect dropped records.
+ *
+ * Failure means @seq refers to a not yet written record.
+ */
+bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
+ struct printk_record *r)
+{
+ return _prb_read_valid(rb, &seq, r, NULL);
+}
+
+/**
+ * prb_read_valid_info() - Non-blocking read of meta data for a requested
+ * record or (if gone) the next available record.
+ *
+ * @rb: The ringbuffer to read from.
+ * @seq: The sequence number of the record to read.
+ * @info: A buffer to store the read record meta data to.
+ * @line_count: A buffer to store the number of lines in the record text.
+ *
+ * This is the public function available to readers to read only the
+ * meta data of a record.
+ *
+ * The reader provides the @info, @line_count buffers to be filled in.
+ * Either of the buffer pointers can be set to NULL if the reader is not
+ * interested in that data.
+ *
+ * Context: Any context.
+ * Return: true if a record's meta data was read, otherwise false.
+ *
+ * On success, the reader must check info->seq to see which record meta data
+ * was actually read. This allows the reader to detect dropped records.
+ *
+ * Failure means @seq refers to a not yet written record.
+ */
+bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
+ struct printk_info *info, unsigned int *line_count)
+{
+ struct printk_record r;
+
+ prb_rec_init_rd(&r, info, NULL, 0);
+
+ return _prb_read_valid(rb, &seq, &r, line_count);
+}
+
+/**
+ * prb_first_valid_seq() - Get the sequence number of the oldest available
+ * record.
+ *
+ * @rb: The ringbuffer to get the sequence number from.
+ *
+ * This is the public function available to readers to see what the
+ * first/oldest valid sequence number is.
+ *
+ * This provides readers a starting point to begin iterating the ringbuffer.
+ *
+ * Context: Any context.
+ * Return: The sequence number of the first/oldest record or, if the
+ * ringbuffer is empty, 0 is returned.
+ */
+u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
+{
+ u64 seq = 0;
+
+ if (!_prb_read_valid(rb, &seq, NULL, NULL))
+ return 0;
+
+ return seq;
+}
+
+/**
+ * prb_next_seq() - Get the sequence number after the last available record.
+ *
+ * @rb: The ringbuffer to get the sequence number from.
+ *
+ * This is the public function available to readers to see what the next
+ * newest sequence number available to readers will be.
+ *
+ * This provides readers a sequence number to jump to if all currently
+ * available records should be skipped.
+ *
+ * Context: Any context.
+ * Return: The sequence number of the next newest (not yet available) record
+ * for readers.
+ */
+u64 prb_next_seq(struct printk_ringbuffer *rb)
+{
+ u64 seq = 0;
+
+ /* Search forward from the oldest descriptor. */
+ while (_prb_read_valid(rb, &seq, NULL, NULL))
+ seq++;
+
+ return seq;
+}
+
+/**
+ * prb_init() - Initialize a ringbuffer to use provided external buffers.
+ *
+ * @rb: The ringbuffer to initialize.
+ * @text_buf: The data buffer for text data.
+ * @textbits: The size of @text_buf as a power-of-2 value.
+ * @descs: The descriptor buffer for ringbuffer records.
+ * @descbits: The count of @descs items as a power-of-2 value.
+ * @infos: The printk_info buffer for ringbuffer records.
+ *
+ * This is the public function available to writers to setup a ringbuffer
+ * during runtime using provided buffers.
+ *
+ * This must match the initialization of DEFINE_PRINTKRB().
+ *
+ * Context: Any context.
+ */
+void prb_init(struct printk_ringbuffer *rb,
+ char *text_buf, unsigned int textbits,
+ struct prb_desc *descs, unsigned int descbits,
+ struct printk_info *infos)
+{
+ memset(descs, 0, _DESCS_COUNT(descbits) * sizeof(descs[0]));
+ memset(infos, 0, _DESCS_COUNT(descbits) * sizeof(infos[0]));
+
+ rb->desc_ring.count_bits = descbits;
+ rb->desc_ring.descs = descs;
+ rb->desc_ring.infos = infos;
+ atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits));
+ atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits));
+
+ rb->text_data_ring.size_bits = textbits;
+ rb->text_data_ring.data = text_buf;
+ atomic_long_set(&rb->text_data_ring.head_lpos, BLK0_LPOS(textbits));
+ atomic_long_set(&rb->text_data_ring.tail_lpos, BLK0_LPOS(textbits));
+
+ atomic_long_set(&rb->fail, 0);
+
+ atomic_long_set(&(descs[_DESCS_COUNT(descbits) - 1].state_var), DESC0_SV(descbits));
+ descs[_DESCS_COUNT(descbits) - 1].text_blk_lpos.begin = FAILED_LPOS;
+ descs[_DESCS_COUNT(descbits) - 1].text_blk_lpos.next = FAILED_LPOS;
+
+ infos[0].seq = -(u64)_DESCS_COUNT(descbits);
+ infos[_DESCS_COUNT(descbits) - 1].seq = 0;
+}
+
+/**
+ * prb_record_text_space() - Query the full actual used ringbuffer space for
+ * the text data of a reserved entry.
+ *
+ * @e: The successfully reserved entry to query.
+ *
+ * This is the public function available to writers to see how much actual
+ * space is used in the ringbuffer to store the text data of the specified
+ * entry.
+ *
+ * This function is only valid if @e has been successfully reserved using
+ * prb_reserve().
+ *
+ * Context: Any context.
+ * Return: The size in bytes used by the text data of the associated record.
+ */
+unsigned int prb_record_text_space(struct prb_reserved_entry *e)
+{
+ return e->text_space;
+}
diff --git a/kernel/printk/printk_ringbuffer.h b/kernel/printk/printk_ringbuffer.h
new file mode 100644
index 000000000000..5dc9d022db07
--- /dev/null
+++ b/kernel/printk/printk_ringbuffer.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _KERNEL_PRINTK_RINGBUFFER_H
+#define _KERNEL_PRINTK_RINGBUFFER_H
+
+#include <linux/atomic.h>
+#include <linux/dev_printk.h>
+
+/*
+ * Meta information about each stored message.
+ *
+ * All fields are set by the printk code except for @seq, which is
+ * set by the ringbuffer code.
+ */
+struct printk_info {
+ u64 seq; /* sequence number */
+ u64 ts_nsec; /* timestamp in nanoseconds */
+ u16 text_len; /* length of text message */
+ u8 facility; /* syslog facility */
+ u8 flags:5; /* internal record flags */
+ u8 level:3; /* syslog level */
+ u32 caller_id; /* thread id or processor id */
+
+ struct dev_printk_info dev_info;
+};
+
+/*
+ * A structure providing the buffers, used by writers and readers.
+ *
+ * Writers:
+ * Using prb_rec_init_wr(), a writer sets @text_buf_size before calling
+ * prb_reserve(). On success, prb_reserve() sets @info and @text_buf to
+ * buffers reserved for that writer.
+ *
+ * Readers:
+ * Using prb_rec_init_rd(), a reader sets all fields before calling
+ * prb_read_valid(). Note that the reader provides the @info and @text_buf,
+ * buffers. On success, the struct pointed to by @info will be filled and
+ * the char array pointed to by @text_buf will be filled with text data.
+ */
+struct printk_record {
+ struct printk_info *info;
+ char *text_buf;
+ unsigned int text_buf_size;
+};
+
+/* Specifies the logical position and span of a data block. */
+struct prb_data_blk_lpos {
+ unsigned long begin;
+ unsigned long next;
+};
+
+/*
+ * A descriptor: the complete meta-data for a record.
+ *
+ * @state_var: A bitwise combination of descriptor ID and descriptor state.
+ */
+struct prb_desc {
+ atomic_long_t state_var;
+ struct prb_data_blk_lpos text_blk_lpos;
+};
+
+/* A ringbuffer of "ID + data" elements. */
+struct prb_data_ring {
+ unsigned int size_bits;
+ char *data;
+ atomic_long_t head_lpos;
+ atomic_long_t tail_lpos;
+};
+
+/* A ringbuffer of "struct prb_desc" elements. */
+struct prb_desc_ring {
+ unsigned int count_bits;
+ struct prb_desc *descs;
+ struct printk_info *infos;
+ atomic_long_t head_id;
+ atomic_long_t tail_id;
+};
+
+/*
+ * The high level structure representing the printk ringbuffer.
+ *
+ * @fail: Count of failed prb_reserve() calls where not even a data-less
+ * record was created.
+ */
+struct printk_ringbuffer {
+ struct prb_desc_ring desc_ring;
+ struct prb_data_ring text_data_ring;
+ atomic_long_t fail;
+};
+
+/*
+ * Used by writers as a reserve/commit handle.
+ *
+ * @rb: Ringbuffer where the entry is reserved.
+ * @irqflags: Saved irq flags to restore on entry commit.
+ * @id: ID of the reserved descriptor.
+ * @text_space: Total occupied buffer space in the text data ring, including
+ * ID, alignment padding, and wrapping data blocks.
+ *
+ * This structure is an opaque handle for writers. Its contents are only
+ * to be used by the ringbuffer implementation.
+ */
+struct prb_reserved_entry {
+ struct printk_ringbuffer *rb;
+ unsigned long irqflags;
+ unsigned long id;
+ unsigned int text_space;
+};
+
+/* The possible responses of a descriptor state-query. */
+enum desc_state {
+ desc_miss = -1, /* ID mismatch (pseudo state) */
+ desc_reserved = 0x0, /* reserved, in use by writer */
+ desc_committed = 0x1, /* committed by writer, could get reopened */
+ desc_finalized = 0x2, /* committed, no further modification allowed */
+ desc_reusable = 0x3, /* free, not yet used by any writer */
+};
+
+#define _DATA_SIZE(sz_bits) (1UL << (sz_bits))
+#define _DESCS_COUNT(ct_bits) (1U << (ct_bits))
+#define DESC_SV_BITS (sizeof(unsigned long) * 8)
+#define DESC_FLAGS_SHIFT (DESC_SV_BITS - 2)
+#define DESC_FLAGS_MASK (3UL << DESC_FLAGS_SHIFT)
+#define DESC_STATE(sv) (3UL & (sv >> DESC_FLAGS_SHIFT))
+#define DESC_SV(id, state) (((unsigned long)state << DESC_FLAGS_SHIFT) | id)
+#define DESC_ID_MASK (~DESC_FLAGS_MASK)
+#define DESC_ID(sv) ((sv) & DESC_ID_MASK)
+#define FAILED_LPOS 0x1
+#define NO_LPOS 0x3
+
+#define FAILED_BLK_LPOS \
+{ \
+ .begin = FAILED_LPOS, \
+ .next = FAILED_LPOS, \
+}
+
+/*
+ * Descriptor Bootstrap
+ *
+ * The descriptor array is minimally initialized to allow immediate usage
+ * by readers and writers. The requirements that the descriptor array
+ * initialization must satisfy:
+ *
+ * Req1
+ * The tail must point to an existing (committed or reusable) descriptor.
+ * This is required by the implementation of prb_first_seq().
+ *
+ * Req2
+ * Readers must see that the ringbuffer is initially empty.
+ *
+ * Req3
+ * The first record reserved by a writer is assigned sequence number 0.
+ *
+ * To satisfy Req1, the tail initially points to a descriptor that is
+ * minimally initialized (having no data block, i.e. data-less with the
+ * data block's lpos @begin and @next values set to FAILED_LPOS).
+ *
+ * To satisfy Req2, the initial tail descriptor is initialized to the
+ * reusable state. Readers recognize reusable descriptors as existing
+ * records, but skip over them.
+ *
+ * To satisfy Req3, the last descriptor in the array is used as the initial
+ * head (and tail) descriptor. This allows the first record reserved by a
+ * writer (head + 1) to be the first descriptor in the array. (Only the first
+ * descriptor in the array could have a valid sequence number of 0.)
+ *
+ * The first time a descriptor is reserved, it is assigned a sequence number
+ * with the value of the array index. A "first time reserved" descriptor can
+ * be recognized because it has a sequence number of 0 but does not have an
+ * index of 0. (Only the first descriptor in the array could have a valid
+ * sequence number of 0.) After the first reservation, all future reservations
+ * (recycling) simply involve incrementing the sequence number by the array
+ * count.
+ *
+ * Hack #1
+ * Only the first descriptor in the array is allowed to have the sequence
+ * number 0. In this case it is not possible to recognize if it is being
+ * reserved the first time (set to index value) or has been reserved
+ * previously (increment by the array count). This is handled by _always_
+ * incrementing the sequence number by the array count when reserving the
+ * first descriptor in the array. In order to satisfy Req3, the sequence
+ * number of the first descriptor in the array is initialized to minus
+ * the array count. Then, upon the first reservation, it is incremented
+ * to 0, thus satisfying Req3.
+ *
+ * Hack #2
+ * prb_first_seq() can be called at any time by readers to retrieve the
+ * sequence number of the tail descriptor. However, due to Req2 and Req3,
+ * initially there are no records to report the sequence number of
+ * (sequence numbers are u64 and there is nothing less than 0). To handle
+ * this, the sequence number of the initial tail descriptor is initialized
+ * to 0. Technically this is incorrect, because there is no record with
+ * sequence number 0 (yet) and the tail descriptor is not the first
+ * descriptor in the array. But it allows prb_read_valid() to correctly
+ * report the existence of a record for _any_ given sequence number at all
+ * times. Bootstrapping is complete when the tail is pushed the first
+ * time, thus finally pointing to the first descriptor reserved by a
+ * writer, which has the assigned sequence number 0.
+ */
+
+/*
+ * Initiating Logical Value Overflows
+ *
+ * Both logical position (lpos) and ID values can be mapped to array indexes
+ * but may experience overflows during the lifetime of the system. To ensure
+ * that printk_ringbuffer can handle the overflows for these types, initial
+ * values are chosen that map to the correct initial array indexes, but will
+ * result in overflows soon.
+ *
+ * BLK0_LPOS
+ * The initial @head_lpos and @tail_lpos for data rings. It is at index
+ * 0 and the lpos value is such that it will overflow on the first wrap.
+ *
+ * DESC0_ID
+ * The initial @head_id and @tail_id for the desc ring. It is at the last
+ * index of the descriptor array (see Req3 above) and the ID value is such
+ * that it will overflow on the second wrap.
+ */
+#define BLK0_LPOS(sz_bits) (-(_DATA_SIZE(sz_bits)))
+#define DESC0_ID(ct_bits) DESC_ID(-(_DESCS_COUNT(ct_bits) + 1))
+#define DESC0_SV(ct_bits) DESC_SV(DESC0_ID(ct_bits), desc_reusable)
+
+/*
+ * Define a ringbuffer with an external text data buffer. The same as
+ * DEFINE_PRINTKRB() but requires specifying an external buffer for the
+ * text data.
+ *
+ * Note: The specified external buffer must be of the size:
+ * 2 ^ (descbits + avgtextbits)
+ */
+#define _DEFINE_PRINTKRB(name, descbits, avgtextbits, text_buf) \
+static struct prb_desc _##name##_descs[_DESCS_COUNT(descbits)] = { \
+ /* the initial head and tail */ \
+ [_DESCS_COUNT(descbits) - 1] = { \
+ /* reusable */ \
+ .state_var = ATOMIC_INIT(DESC0_SV(descbits)), \
+ /* no associated data block */ \
+ .text_blk_lpos = FAILED_BLK_LPOS, \
+ }, \
+}; \
+static struct printk_info _##name##_infos[_DESCS_COUNT(descbits)] = { \
+ /* this will be the first record reserved by a writer */ \
+ [0] = { \
+ /* will be incremented to 0 on the first reservation */ \
+ .seq = -(u64)_DESCS_COUNT(descbits), \
+ }, \
+ /* the initial head and tail */ \
+ [_DESCS_COUNT(descbits) - 1] = { \
+ /* reports the first seq value during the bootstrap phase */ \
+ .seq = 0, \
+ }, \
+}; \
+static struct printk_ringbuffer name = { \
+ .desc_ring = { \
+ .count_bits = descbits, \
+ .descs = &_##name##_descs[0], \
+ .infos = &_##name##_infos[0], \
+ .head_id = ATOMIC_INIT(DESC0_ID(descbits)), \
+ .tail_id = ATOMIC_INIT(DESC0_ID(descbits)), \
+ }, \
+ .text_data_ring = { \
+ .size_bits = (avgtextbits) + (descbits), \
+ .data = text_buf, \
+ .head_lpos = ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))), \
+ .tail_lpos = ATOMIC_LONG_INIT(BLK0_LPOS((avgtextbits) + (descbits))), \
+ }, \
+ .fail = ATOMIC_LONG_INIT(0), \
+}
+
+/**
+ * DEFINE_PRINTKRB() - Define a ringbuffer.
+ *
+ * @name: The name of the ringbuffer variable.
+ * @descbits: The number of descriptors as a power-of-2 value.
+ * @avgtextbits: The average text data size per record as a power-of-2 value.
+ *
+ * This is a macro for defining a ringbuffer and all internal structures
+ * such that it is ready for immediate use. See _DEFINE_PRINTKRB() for a
+ * variant where the text data buffer can be specified externally.
+ */
+#define DEFINE_PRINTKRB(name, descbits, avgtextbits) \
+static char _##name##_text[1U << ((avgtextbits) + (descbits))] \
+ __aligned(__alignof__(unsigned long)); \
+_DEFINE_PRINTKRB(name, descbits, avgtextbits, &_##name##_text[0])
+
+/* Writer Interface */
+
+/**
+ * prb_rec_init_wd() - Initialize a buffer for writing records.
+ *
+ * @r: The record to initialize.
+ * @text_buf_size: The needed text buffer size.
+ */
+static inline void prb_rec_init_wr(struct printk_record *r,
+ unsigned int text_buf_size)
+{
+ r->info = NULL;
+ r->text_buf = NULL;
+ r->text_buf_size = text_buf_size;
+}
+
+bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
+ struct printk_record *r);
+bool prb_reserve_in_last(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
+ struct printk_record *r, u32 caller_id, unsigned int max_size);
+void prb_commit(struct prb_reserved_entry *e);
+void prb_final_commit(struct prb_reserved_entry *e);
+
+void prb_init(struct printk_ringbuffer *rb,
+ char *text_buf, unsigned int text_buf_size,
+ struct prb_desc *descs, unsigned int descs_count_bits,
+ struct printk_info *infos);
+unsigned int prb_record_text_space(struct prb_reserved_entry *e);
+
+/* Reader Interface */
+
+/**
+ * prb_rec_init_rd() - Initialize a buffer for reading records.
+ *
+ * @r: The record to initialize.
+ * @info: A buffer to store record meta-data.
+ * @text_buf: A buffer to store text data.
+ * @text_buf_size: The size of @text_buf.
+ *
+ * Initialize all the fields that a reader is interested in. All arguments
+ * (except @r) are optional. Only record data for arguments that are
+ * non-NULL or non-zero will be read.
+ */
+static inline void prb_rec_init_rd(struct printk_record *r,
+ struct printk_info *info,
+ char *text_buf, unsigned int text_buf_size)
+{
+ r->info = info;
+ r->text_buf = text_buf;
+ r->text_buf_size = text_buf_size;
+}
+
+/**
+ * prb_for_each_record() - Iterate over the records of a ringbuffer.
+ *
+ * @from: The sequence number to begin with.
+ * @rb: The ringbuffer to iterate over.
+ * @s: A u64 to store the sequence number on each iteration.
+ * @r: A printk_record to store the record on each iteration.
+ *
+ * This is a macro for conveniently iterating over a ringbuffer.
+ * Note that @s may not be the sequence number of the record on each
+ * iteration. For the sequence number, @r->info->seq should be checked.
+ *
+ * Context: Any context.
+ */
+#define prb_for_each_record(from, rb, s, r) \
+for ((s) = from; prb_read_valid(rb, s, r); (s) = (r)->info->seq + 1)
+
+/**
+ * prb_for_each_info() - Iterate over the meta data of a ringbuffer.
+ *
+ * @from: The sequence number to begin with.
+ * @rb: The ringbuffer to iterate over.
+ * @s: A u64 to store the sequence number on each iteration.
+ * @i: A printk_info to store the record meta data on each iteration.
+ * @lc: An unsigned int to store the text line count of each record.
+ *
+ * This is a macro for conveniently iterating over a ringbuffer.
+ * Note that @s may not be the sequence number of the record on each
+ * iteration. For the sequence number, @r->info->seq should be checked.
+ *
+ * Context: Any context.
+ */
+#define prb_for_each_info(from, rb, s, i, lc) \
+for ((s) = from; prb_read_valid_info(rb, s, i, lc); (s) = (i)->seq + 1)
+
+bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
+ struct printk_record *r);
+bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
+ struct printk_info *info, unsigned int *line_count);
+
+u64 prb_first_valid_seq(struct printk_ringbuffer *rb);
+u64 prb_next_seq(struct printk_ringbuffer *rb);
+
+#endif /* _KERNEL_PRINTK_RINGBUFFER_H */
diff --git a/kernel/printk/printk_safe.c b/kernel/printk/printk_safe.c
index 50aeae770434..5dbc40160990 100644
--- a/kernel/printk/printk_safe.c
+++ b/kernel/printk/printk_safe.c
@@ -375,7 +375,7 @@ __printf(1, 0) int vprintk_func(const char *fmt, va_list args)
raw_spin_trylock(&logbuf_lock)) {
int len;
- len = vprintk_store(0, LOGLEVEL_DEFAULT, NULL, 0, fmt, args);
+ len = vprintk_store(0, LOGLEVEL_DEFAULT, NULL, fmt, args);
raw_spin_unlock(&logbuf_lock);
defer_console_output();
return len;
diff --git a/scripts/gdb/linux/dmesg.py b/scripts/gdb/linux/dmesg.py
index 2fa7bb83885f..a92c55bd8de5 100644
--- a/scripts/gdb/linux/dmesg.py
+++ b/scripts/gdb/linux/dmesg.py
@@ -16,8 +16,13 @@ import sys
from linux import utils
-printk_log_type = utils.CachedType("struct printk_log")
-
+printk_info_type = utils.CachedType("struct printk_info")
+prb_data_blk_lpos_type = utils.CachedType("struct prb_data_blk_lpos")
+prb_desc_type = utils.CachedType("struct prb_desc")
+prb_desc_ring_type = utils.CachedType("struct prb_desc_ring")
+prb_data_ring_type = utils.CachedType("struct prb_data_ring")
+printk_ringbuffer_type = utils.CachedType("struct printk_ringbuffer")
+atomic_long_type = utils.CachedType("atomic_long_t")
class LxDmesg(gdb.Command):
"""Print Linux kernel log buffer."""
@@ -26,44 +31,110 @@ class LxDmesg(gdb.Command):
super(LxDmesg, self).__init__("lx-dmesg", gdb.COMMAND_DATA)
def invoke(self, arg, from_tty):
- log_buf_addr = int(str(gdb.parse_and_eval(
- "(void *)'printk.c'::log_buf")).split()[0], 16)
- log_first_idx = int(gdb.parse_and_eval("'printk.c'::log_first_idx"))
- log_next_idx = int(gdb.parse_and_eval("'printk.c'::log_next_idx"))
- log_buf_len = int(gdb.parse_and_eval("'printk.c'::log_buf_len"))
-
inf = gdb.inferiors()[0]
- start = log_buf_addr + log_first_idx
- if log_first_idx < log_next_idx:
- log_buf_2nd_half = -1
- length = log_next_idx - log_first_idx
- log_buf = utils.read_memoryview(inf, start, length).tobytes()
- else:
- log_buf_2nd_half = log_buf_len - log_first_idx
- a = utils.read_memoryview(inf, start, log_buf_2nd_half)
- b = utils.read_memoryview(inf, log_buf_addr, log_next_idx)
- log_buf = a.tobytes() + b.tobytes()
-
- length_offset = printk_log_type.get_type()['len'].bitpos // 8
- text_len_offset = printk_log_type.get_type()['text_len'].bitpos // 8
- time_stamp_offset = printk_log_type.get_type()['ts_nsec'].bitpos // 8
- text_offset = printk_log_type.get_type().sizeof
-
- pos = 0
- while pos < log_buf.__len__():
- length = utils.read_u16(log_buf, pos + length_offset)
- if length == 0:
- if log_buf_2nd_half == -1:
- gdb.write("Corrupted log buffer!\n")
+
+ # read in prb structure
+ prb_addr = int(str(gdb.parse_and_eval("(void *)'printk.c'::prb")).split()[0], 16)
+ sz = printk_ringbuffer_type.get_type().sizeof
+ prb = utils.read_memoryview(inf, prb_addr, sz).tobytes()
+
+ # read in descriptor ring structure
+ off = printk_ringbuffer_type.get_type()['desc_ring'].bitpos // 8
+ addr = prb_addr + off
+ sz = prb_desc_ring_type.get_type().sizeof
+ desc_ring = utils.read_memoryview(inf, addr, sz).tobytes()
+
+ # read in descriptor array
+ off = prb_desc_ring_type.get_type()['count_bits'].bitpos // 8
+ desc_ring_count = 1 << utils.read_u32(desc_ring, off)
+ desc_sz = prb_desc_type.get_type().sizeof
+ off = prb_desc_ring_type.get_type()['descs'].bitpos // 8
+ addr = utils.read_ulong(desc_ring, off)
+ descs = utils.read_memoryview(inf, addr, desc_sz * desc_ring_count).tobytes()
+
+ # read in info array
+ info_sz = printk_info_type.get_type().sizeof
+ off = prb_desc_ring_type.get_type()['infos'].bitpos // 8
+ addr = utils.read_ulong(desc_ring, off)
+ infos = utils.read_memoryview(inf, addr, info_sz * desc_ring_count).tobytes()
+
+ # read in text data ring structure
+ off = printk_ringbuffer_type.get_type()['text_data_ring'].bitpos // 8
+ addr = prb_addr + off
+ sz = prb_data_ring_type.get_type().sizeof
+ text_data_ring = utils.read_memoryview(inf, addr, sz).tobytes()
+
+ # read in text data
+ off = prb_data_ring_type.get_type()['size_bits'].bitpos // 8
+ text_data_sz = 1 << utils.read_u32(text_data_ring, off)
+ off = prb_data_ring_type.get_type()['data'].bitpos // 8
+ addr = utils.read_ulong(text_data_ring, off)
+ text_data = utils.read_memoryview(inf, addr, text_data_sz).tobytes()
+
+ counter_off = atomic_long_type.get_type()['counter'].bitpos // 8
+
+ sv_off = prb_desc_type.get_type()['state_var'].bitpos // 8
+
+ off = prb_desc_type.get_type()['text_blk_lpos'].bitpos // 8
+ begin_off = off + (prb_data_blk_lpos_type.get_type()['begin'].bitpos // 8)
+ next_off = off + (prb_data_blk_lpos_type.get_type()['next'].bitpos // 8)
+
+ ts_off = printk_info_type.get_type()['ts_nsec'].bitpos // 8
+ len_off = printk_info_type.get_type()['text_len'].bitpos // 8
+
+ # definitions from kernel/printk/printk_ringbuffer.h
+ desc_committed = 1
+ desc_finalized = 2
+ desc_sv_bits = utils.get_long_type().sizeof * 8
+ desc_flags_shift = desc_sv_bits - 2
+ desc_flags_mask = 3 << desc_flags_shift
+ desc_id_mask = ~desc_flags_mask
+
+ # read in tail and head descriptor ids
+ off = prb_desc_ring_type.get_type()['tail_id'].bitpos // 8
+ tail_id = utils.read_u64(desc_ring, off + counter_off)
+ off = prb_desc_ring_type.get_type()['head_id'].bitpos // 8
+ head_id = utils.read_u64(desc_ring, off + counter_off)
+
+ did = tail_id
+ while True:
+ ind = did % desc_ring_count
+ desc_off = desc_sz * ind
+ info_off = info_sz * ind
+
+ # skip non-committed record
+ state = 3 & (utils.read_u64(descs, desc_off + sv_off +
+ counter_off) >> desc_flags_shift)
+ if state != desc_committed and state != desc_finalized:
+ if did == head_id:
break
- pos = log_buf_2nd_half
+ did = (did + 1) & desc_id_mask
continue
- text_len = utils.read_u16(log_buf, pos + text_len_offset)
- text_start = pos + text_offset
- text = log_buf[text_start:text_start + text_len].decode(
- encoding='utf8', errors='replace')
- time_stamp = utils.read_u64(log_buf, pos + time_stamp_offset)
+ begin = utils.read_ulong(descs, desc_off + begin_off) % text_data_sz
+ end = utils.read_ulong(descs, desc_off + next_off) % text_data_sz
+
+ # handle data-less record
+ if begin & 1 == 1:
+ text = ""
+ else:
+ # handle wrapping data block
+ if begin > end:
+ begin = 0
+
+ # skip over descriptor id
+ text_start = begin + utils.get_long_type().sizeof
+
+ text_len = utils.read_u16(infos, info_off + len_off)
+
+ # handle truncated message
+ if end - text_start < text_len:
+ text_len = end - text_start
+
+ text = text_data[text_start:text_start + text_len].decode(
+ encoding='utf8', errors='replace')
+
+ time_stamp = utils.read_u64(infos, info_off + ts_off)
for line in text.splitlines():
msg = u"[{time:12.6f}] {line}\n".format(
@@ -75,7 +146,9 @@ class LxDmesg(gdb.Command):
msg = msg.encode(encoding='utf8', errors='replace')
gdb.write(msg)
- pos += length
+ if did == head_id:
+ break
+ did = (did + 1) & desc_id_mask
LxDmesg()
diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py
index ea94221dbd39..ff7c1799d588 100644
--- a/scripts/gdb/linux/utils.py
+++ b/scripts/gdb/linux/utils.py
@@ -123,6 +123,13 @@ def read_u64(buffer, offset):
return read_u32(buffer, offset + 4) + (read_u32(buffer, offset) << 32)
+def read_ulong(buffer, offset):
+ if get_long_type().sizeof == 8:
+ return read_u64(buffer, offset)
+ else:
+ return read_u32(buffer, offset)
+
+
target_arch = None