summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c.txt10
-rw-r--r--Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml3
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,i2c.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,iic.txt1
-rw-r--r--Documentation/i2c/busses/i2c-i801.rst1
-rw-r--r--Documentation/i2c/dev-interface.rst2
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c4
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c8
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c6
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c2
-rw-r--r--drivers/i2c/busses/i2c-aspeed.c4
-rw-r--r--drivers/i2c/busses/i2c-at91-master.c69
-rw-r--r--drivers/i2c/busses/i2c-at91.h3
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c13
-rw-r--r--drivers/i2c/busses/i2c-bcm2835.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c2
-rw-r--r--drivers/i2c/busses/i2c-digicolor.c2
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c39
-rw-r--r--drivers/i2c/busses/i2c-emev2.c3
-rw-r--r--drivers/i2c/busses/i2c-fsi.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c19
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c86
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c9
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c3
-rw-r--r--drivers/i2c/busses/i2c-piix4.c4
-rw-r--r--drivers/i2c/busses/i2c-pnx.c3
-rw-r--r--drivers/i2c/busses/i2c-rcar.c15
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c39
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c3
-rw-r--r--drivers/i2c/busses/i2c-sibyte.c3
-rw-r--r--drivers/i2c/busses/i2c-sirf.c4
-rw-r--r--drivers/i2c/busses/i2c-synquacer.c3
-rw-r--r--drivers/i2c/busses/i2c-tegra.c101
-rw-r--r--drivers/i2c/busses/i2c-viapro.c8
-rw-r--r--drivers/i2c/busses/scx200_acb.c2
-rw-r--r--drivers/i2c/i2c-core-base.c158
-rw-r--r--drivers/i2c/i2c-dev.c4
-rw-r--r--drivers/i2c/i2c-slave-eeprom.c2
-rw-r--r--include/linux/i2c.h14
41 files changed, 409 insertions, 250 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
index 88b71c1b32c9..7f0194fdd0cc 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
@@ -14,6 +14,7 @@ Required properties:
"mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
"mediatek,mt8173-i2c": for MediaTek MT8173
"mediatek,mt8183-i2c": for MediaTek MT8183
+ "mediatek,mt8192-i2c": for MediaTek MT8192
"mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
- reg: physical base address of the controller and dma base, length of memory
mapped region.
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 438ae123107e..a21c359b9f02 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -72,6 +72,16 @@ wants to support one of the below features, it should adapt these bindings.
this information to adapt power management to keep the arbitration awake
all the time, for example. Can not be combined with 'single-master'.
+- pinctrl
+ add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
+ recovery, call it "gpio" or "recovery" (deprecated) state
+
+- scl-gpios
+ specify the gpio related to SCL pin. Used for GPIO bus recovery.
+
+- sda-gpios
+ specify the gpio related to SDA pin. Optional for GPIO bus recovery.
+
- single-master
states that there is no other master active on this bus. The OS can use
this information to detect a stalled bus more reliably, for example.
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index 2ceb05ba2df5..5b5ae402f97a 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -27,6 +27,9 @@ properties:
- const: allwinner,sun50i-a64-i2c
- const: allwinner,sun6i-a31-i2c
- items:
+ - const: allwinner,sun50i-a100-i2c
+ - const: allwinner,sun6i-a31-i2c
+ - items:
- const: allwinner,sun50i-h6-i2c
- const: allwinner,sun6i-a31-i2c
diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
index a03f9f5cb378..96d869ac3839 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
@@ -10,6 +10,7 @@ Required properties:
"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
"renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC.
"renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC.
+ "renesas,i2c-r8a774e1" if the device is a part of a R8A774E1 SoC.
"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
index 89facb09337a..93d412832e66 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
@@ -11,6 +11,7 @@ Required properties:
- "renesas,iic-r8a774a1" (RZ/G2M)
- "renesas,iic-r8a774b1" (RZ/G2N)
- "renesas,iic-r8a774c0" (RZ/G2E)
+ - "renesas,iic-r8a774e1" (RZ/G2H)
- "renesas,iic-r8a7790" (R-Car H2)
- "renesas,iic-r8a7791" (R-Car M2-W)
- "renesas,iic-r8a7792" (R-Car V2H)
diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst
index b83da0e94184..faf32330c335 100644
--- a/Documentation/i2c/busses/i2c-i801.rst
+++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -43,6 +43,7 @@ Supported adapters:
* Intel Elkhart Lake (PCH)
* Intel Tiger Lake (PCH)
* Intel Jasper Lake (SOC)
+ * Intel Emmitsburg (PCH)
Datasheets: Publicly available at the Intel website
diff --git a/Documentation/i2c/dev-interface.rst b/Documentation/i2c/dev-interface.rst
index bdb247f2f11a..73ad34849f99 100644
--- a/Documentation/i2c/dev-interface.rst
+++ b/Documentation/i2c/dev-interface.rst
@@ -159,6 +159,8 @@ for details) through the following functions::
__s32 i2c_smbus_read_word_data(int file, __u8 command);
__s32 i2c_smbus_write_word_data(int file, __u8 command, __u16 value);
__s32 i2c_smbus_process_call(int file, __u8 command, __u16 value);
+ __s32 i2c_smbus_block_process_call(int file, __u8 command, __u8 length,
+ __u8 *values);
__s32 i2c_smbus_read_block_data(int file, __u8 command, __u8 *values);
__s32 i2c_smbus_write_block_data(int file, __u8 command, __u8 length,
__u8 *values);
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 388978775be0..710fbef9a9c2 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -542,8 +542,8 @@ int i2c_pca_add_numbered_bus(struct i2c_adapter *adap)
}
EXPORT_SYMBOL(i2c_pca_add_numbered_bus);
-MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>, "
- "Wolfram Sang <kernel@pengutronix.de>");
+MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
MODULE_DESCRIPTION("I2C-Bus PCA9564/PCA9665 algorithm");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 88639e52c73a..293e7a0760e7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -146,6 +146,7 @@ config I2C_I801
Elkhart Lake (PCH)
Tiger Lake (PCH)
Jasper Lake (SOC)
+ Emmitsburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index a43deea390f5..fb93152845f4 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -519,9 +519,9 @@ static struct pci_driver ali1535_driver = {
module_pci_driver(ali1535_driver);
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "Mark D. Studebaker <mdsxyz123@yahoo.com> "
- "and Dan Eaton <dan.eaton@rocketlogix.com>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Dan Eaton <dan.eaton@rocketlogix.com>");
MODULE_DESCRIPTION("ALI1535 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 02185a1cfa77..cc58feacd082 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -502,8 +502,8 @@ static struct pci_driver ali15x3_driver = {
module_pci_driver(ali15x3_driver);
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("ALI15X3 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 2b14fef5bf26..34862ad3423e 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -381,7 +381,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
if (status)
return status;
len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
- /* fall through */
+ fallthrough;
case I2C_SMBUS_I2C_BLOCK_DATA:
for (i = 0; i < len; i++) {
status = amd_ec_read(smbus, AMD_SMB_DATA + i,
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index f51702d86a90..31268074c422 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -504,7 +504,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
goto error_and_stop;
}
irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
- /* fall through */
+ fallthrough;
case ASPEED_I2C_MASTER_TX_FIRST:
if (bus->buf_index < msg->len) {
bus->master_state = ASPEED_I2C_MASTER_TX;
@@ -520,7 +520,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
/* RX may not have completed yet (only address cycle) */
if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
goto out_no_complete;
- /* fall through */
+ fallthrough;
case ASPEED_I2C_MASTER_RX:
if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
dev_err(bus->dev, "master failed to RX\n");
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 363d540a8345..66864f9cf7ac 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -816,79 +816,16 @@ error:
return ret;
}
-static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
-{
- struct at91_twi_dev *dev = i2c_get_adapdata(adap);
-
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
-}
-
-static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
-{
- struct at91_twi_dev *dev = i2c_get_adapdata(adap);
-
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
-}
-
static int at91_init_twi_recovery_gpio(struct platform_device *pdev,
struct at91_twi_dev *dev)
{
struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
- dev->pinctrl = devm_pinctrl_get(&pdev->dev);
- if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
+ rinfo->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (!rinfo->pinctrl || IS_ERR(rinfo->pinctrl)) {
dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
- return PTR_ERR(dev->pinctrl);
+ return PTR_ERR(rinfo->pinctrl);
}
-
- dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
- PINCTRL_STATE_DEFAULT);
- dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
- "gpio");
- if (IS_ERR(dev->pinctrl_pins_default) ||
- IS_ERR(dev->pinctrl_pins_gpio)) {
- dev_info(&pdev->dev, "pinctrl states incomplete for recovery\n");
- return -EINVAL;
- }
-
- /*
- * pins will be taken as GPIO, so we might as well inform pinctrl about
- * this and move the state to GPIO
- */
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
-
- rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
- if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
- GPIOD_OUT_HIGH_OPEN_DRAIN);
- if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- if (IS_ERR(rinfo->sda_gpiod) ||
- IS_ERR(rinfo->scl_gpiod)) {
- dev_info(&pdev->dev, "recovery information incomplete\n");
- if (!IS_ERR(rinfo->sda_gpiod)) {
- gpiod_put(rinfo->sda_gpiod);
- rinfo->sda_gpiod = NULL;
- }
- if (!IS_ERR(rinfo->scl_gpiod)) {
- gpiod_put(rinfo->scl_gpiod);
- rinfo->scl_gpiod = NULL;
- }
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
- return -EINVAL;
- }
-
- /* change the state of the pins back to their default state */
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
-
- dev_info(&pdev->dev, "using scl, sda for recovery\n");
-
- rinfo->prepare_recovery = at91_prepare_twi_recovery;
- rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
- rinfo->recover_bus = i2c_generic_scl_recovery;
dev->adapter.bus_recovery_info = rinfo;
return 0;
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index 7e7b4955ca7f..eae673ae786c 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -157,9 +157,6 @@ struct at91_twi_dev {
struct at91_twi_dma dma;
bool slave_detected;
struct i2c_bus_recovery_info rinfo;
- struct pinctrl *pinctrl;
- struct pinctrl_state *pinctrl_pins_default;
- struct pinctrl_state *pinctrl_pins_gpio;
#ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
unsigned smr;
struct i2c_client *slave;
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 8a3c98866fb7..688e92818821 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -1078,7 +1078,7 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
if (!iproc_i2c->slave)
return -EINVAL;
- iproc_i2c->slave = NULL;
+ disable_irq(iproc_i2c->irq);
/* disable all slave interrupts */
tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
@@ -1091,6 +1091,17 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp);
+ /* flush TX/RX FIFOs */
+ tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
+ iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp);
+
+ /* clear all pending slave interrupts */
+ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
+
+ iproc_i2c->slave = NULL;
+
+ enable_irq(iproc_i2c->irq);
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index d9b86fcc3825..5dc519516292 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -392,7 +392,7 @@ static const struct i2c_algorithm bcm2835_i2c_algo = {
/*
* The BCM2835 was reported to have problems with clock stretching:
- * http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html
+ * https://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html
* https://www.raspberrypi.org/forums/viewtopic.php?p=146272
*/
static const struct i2c_adapter_quirks bcm2835_i2c_quirks = {
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 8522134f9ea9..55c83a7a24f3 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -90,7 +90,7 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
switch (pdev->device) {
case 0x0817:
dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
- /* fall through */
+ fallthrough;
case 0x0818:
case 0x0819:
c->bus_num = pdev->device - 0x817 + 3;
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
index 332f00437479..f67639dc74b7 100644
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -187,7 +187,7 @@ static irqreturn_t dc_i2c_irq(int irq, void *dev_id)
break;
}
i2c->state = STATE_WRITE;
- /* fall through */
+ fallthrough;
case STATE_WRITE:
if (i2c->msgbuf_ptr < i2c->msg->len)
dc_i2c_write_buf(i2c);
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 73f139690e4e..843b31a0f752 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -846,11 +846,10 @@ static void pch_i2c_remove(struct pci_dev *pdev)
kfree(adap_info);
}
-#ifdef CONFIG_PM
-static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused pch_i2c_suspend(struct device *dev)
{
- int ret;
int i;
+ struct pci_dev *pdev = to_pci_dev(dev);
struct adapter_info *adap_info = pci_get_drvdata(pdev);
void __iomem *p = adap_info->pch_data[0].pch_base_address;
@@ -872,34 +871,13 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA),
ioread32(p + PCH_I2CESRSTA));
- ret = pci_save_state(pdev);
-
- if (ret) {
- pch_pci_err(pdev, "pci_save_state\n");
- return ret;
- }
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
-static int pch_i2c_resume(struct pci_dev *pdev)
+static int __maybe_unused pch_i2c_resume(struct device *dev)
{
int i;
- struct adapter_info *adap_info = pci_get_drvdata(pdev);
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
- if (pci_enable_device(pdev) < 0) {
- pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n");
- return -EIO;
- }
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
+ struct adapter_info *adap_info = dev_get_drvdata(dev);
for (i = 0; i < adap_info->ch_num; i++)
pch_i2c_init(&adap_info->pch_data[i]);
@@ -908,18 +886,15 @@ static int pch_i2c_resume(struct pci_dev *pdev)
return 0;
}
-#else
-#define pch_i2c_suspend NULL
-#define pch_i2c_resume NULL
-#endif
+
+static SIMPLE_DEV_PM_OPS(pch_i2c_pm_ops, pch_i2c_suspend, pch_i2c_resume);
static struct pci_driver pch_pcidriver = {
.name = KBUILD_MODNAME,
.id_table = pch_pcidev_id,
.probe = pch_i2c_probe,
.remove = pch_i2c_remove,
- .suspend = pch_i2c_suspend,
- .resume = pch_i2c_resume
+ .driver.pm = &pch_i2c_pm_ops,
};
module_pci_driver(pch_pcidriver);
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index 1a319352e51b..a08554c1a570 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -442,6 +442,7 @@ static struct platform_driver em_i2c_driver = {
module_platform_driver(em_i2c_driver);
MODULE_DESCRIPTION("EMEV2 I2C bus driver");
-MODULE_AUTHOR("Ian Molton and Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_AUTHOR("Ian Molton");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, em_i2c_ids);
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 977d6f524649..10332693edf0 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev)
for (port_no = 0; port_no < ports; port_no++) {
np = fsi_i2c_find_port_of_node(dev->of_node, port_no);
- if (np && !of_device_is_available(np))
+ if (!of_device_is_available(np))
continue;
port = kzalloc(sizeof(*port), GFP_KERNEL);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index fea644921a76..e32ef3f01fe8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -54,6 +54,7 @@
* Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
* DNV (SOC) 0x19df 32 hard yes yes yes
+ * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
* Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
@@ -67,6 +68,7 @@
* Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes
* Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes
* Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes
+ * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes
* Jasper Lake (SOC) 0x4da3 32 hard yes yes yes
* Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes
*
@@ -207,6 +209,7 @@
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
#define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
+#define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -221,6 +224,7 @@
#define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4
#define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3
#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23
#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
@@ -1062,6 +1066,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
@@ -1074,6 +1079,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
{ 0, }
};
@@ -1748,7 +1754,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS:
case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS:
+ case PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS:
case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
+ case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
priv->features |= FEATURE_BLOCK_PROC;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
@@ -1765,19 +1773,19 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
priv->features |= FEATURE_IDF;
- /* fall through */
+ fallthrough;
default:
priv->features |= FEATURE_BLOCK_PROC;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
- /* fall through */
+ fallthrough;
case PCI_DEVICE_ID_INTEL_82801DB_3:
priv->features |= FEATURE_SMBUS_PEC;
priv->features |= FEATURE_BLOCK_BUFFER;
- /* fall through */
+ fallthrough;
case PCI_DEVICE_ID_INTEL_82801CA_3:
priv->features |= FEATURE_HOST_NOTIFY;
- /* fall through */
+ fallthrough;
case PCI_DEVICE_ID_INTEL_82801BA_2:
case PCI_DEVICE_ID_INTEL_82801AB_3:
case PCI_DEVICE_ID_INTEL_82801AA_3:
@@ -1986,7 +1994,8 @@ static void __exit i2c_i801_exit(void)
pci_unregister_driver(&i801_driver);
}
-MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index deef69e56906..efc14041d45b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -48,11 +48,13 @@
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
+#define I2C_DMA_ASYNC_MODE 0x0004
+#define I2C_DMA_SKIP_CONFIG 0x0010
+#define I2C_DMA_DIR_CHANGE 0x0200
#define I2C_DMA_START_EN 0x0001
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
#define I2C_DMA_HARD_RST 0x0002
-#define I2C_DMA_4G_MODE 0x0001
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
@@ -201,10 +203,11 @@ struct mtk_i2c_compatible {
unsigned char dcm: 1;
unsigned char auto_restart: 1;
unsigned char aux_len_reg: 1;
- unsigned char support_33bits: 1;
unsigned char timing_adjust: 1;
unsigned char dma_sync: 1;
unsigned char ltiming_adjust: 1;
+ unsigned char apdma_sync: 1;
+ unsigned char max_dma_support;
};
struct mtk_i2c_ac_timing {
@@ -250,14 +253,13 @@ struct mtk_i2c {
/**
* struct i2c_spec_values:
- * min_low_ns: min LOW period of the SCL clock
- * min_su_sta_ns: min set-up time for a repeated START condition
- * max_hd_dat_ns: max data hold time
- * min_su_dat_ns: min data set-up time
+ * @min_low_ns: min LOW period of the SCL clock
+ * @min_su_sta_ns: min set-up time for a repeated START condition
+ * @max_hd_dat_ns: max data hold time
+ * @min_su_dat_ns: min data set-up time
*/
struct i2c_spec_values {
unsigned int min_low_ns;
- unsigned int min_high_ns;
unsigned int min_su_sta_ns;
unsigned int max_hd_dat_ns;
unsigned int min_su_dat_ns;
@@ -307,10 +309,11 @@ static const struct mtk_i2c_compatible mt2712_compat = {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 1,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 33,
};
static const struct mtk_i2c_compatible mt6577_compat = {
@@ -320,10 +323,11 @@ static const struct mtk_i2c_compatible mt6577_compat = {
.dcm = 1,
.auto_restart = 0,
.aux_len_reg = 0,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -333,10 +337,11 @@ static const struct mtk_i2c_compatible mt6589_compat = {
.dcm = 0,
.auto_restart = 0,
.aux_len_reg = 0,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt7622_compat = {
@@ -346,10 +351,11 @@ static const struct mtk_i2c_compatible mt7622_compat = {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -358,10 +364,11 @@ static const struct mtk_i2c_compatible mt8173_compat = {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 33,
};
static const struct mtk_i2c_compatible mt8183_compat = {
@@ -371,10 +378,25 @@ static const struct mtk_i2c_compatible mt8183_compat = {
.dcm = 0,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 1,
.dma_sync = 1,
.ltiming_adjust = 1,
+ .apdma_sync = 0,
+ .max_dma_support = 33,
+};
+
+static const struct mtk_i2c_compatible mt8192_compat = {
+ .quirks = &mt8183_i2c_quirks,
+ .regs = mt_i2c_regs_v2,
+ .pmic_i2c = 0,
+ .dcm = 0,
+ .auto_restart = 1,
+ .aux_len_reg = 1,
+ .timing_adjust = 1,
+ .dma_sync = 1,
+ .ltiming_adjust = 1,
+ .apdma_sync = 1,
+ .max_dma_support = 36,
};
static const struct of_device_id mtk_i2c_of_match[] = {
@@ -384,6 +406,7 @@ static const struct of_device_id mtk_i2c_of_match[] = {
{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
+ { .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat },
{}
};
MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
@@ -786,11 +809,6 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
return 0;
}
-static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
-{
- return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
-}
-
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -798,6 +816,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
u16 start_reg;
u16 control_reg;
u16 restart_flag = 0;
+ u16 dma_sync = 0;
u32 reg_4g_mode;
u8 *dma_rd_buf = NULL;
u8 *dma_wr_buf = NULL;
@@ -851,10 +870,16 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
}
+ if (i2c->dev_comp->apdma_sync) {
+ dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE;
+ if (i2c->op == I2C_MASTER_WRRD)
+ dma_sync |= I2C_DMA_DIR_CHANGE;
+ }
+
/* Prepare buffer data to start transfer */
if (i2c->op == I2C_MASTER_RD) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CON_RX | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_rd_buf)
@@ -868,8 +893,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(rpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
}
@@ -877,7 +902,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
} else if (i2c->op == I2C_MASTER_WR) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CON_TX | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_wr_buf)
@@ -891,8 +916,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(wpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
}
@@ -900,7 +925,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
} else {
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CLR_FLAG | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_wr_buf)
@@ -937,11 +962,11 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(wpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
- reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ reg_4g_mode = upper_32_bits(rpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
}
@@ -1215,8 +1240,9 @@ static int mtk_i2c_probe(struct platform_device *pdev)
return -EINVAL;
}
- if (i2c->dev_comp->support_33bits) {
- ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
+ if (i2c->dev_comp->max_dma_support > 32) {
+ ret = dma_set_mask(&pdev->dev,
+ DMA_BIT_MASK(i2c->dev_comp->max_dma_support));
if (ret) {
dev_err(&pdev->dev, "dma_set_mask return error.\n");
return ret;
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 829b8c98ae51..8d9d4ffdcd24 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -251,7 +251,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
break;
}
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
if ((drv_data->bytes_left == 0)
@@ -282,14 +282,14 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
break;
}
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
if (drv_data->bytes_left == 0) {
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
drv_data->state = MV64XXX_I2C_STATE_IDLE;
break;
}
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
@@ -417,8 +417,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
"mv64xxx_i2c_do_action: Invalid action: %d\n",
drv_data->action);
drv_data->rc = -EIO;
-
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_ACTION_SEND_STOP:
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index e1e8d4ef9aa7..d4b1b0865f67 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1122,6 +1122,7 @@ static void __exit nmk_i2c_exit(void)
subsys_initcall(nmk_i2c_init);
module_exit(nmk_i2c_exit);
-MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
+MODULE_AUTHOR("Sachin Verma");
+MODULE_AUTHOR("Srinidhi KASAGAR");
MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 69740a4ff1db..8c1b31ed0c42 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -1032,7 +1032,7 @@ static struct pci_driver piix4_driver = {
module_pci_driver(piix4_driver);
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
- "Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("PIIX4 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d7207c10f1d..8c4ec7f13f5a 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -781,7 +781,8 @@ static void __exit i2c_adap_pnx_exit(void)
platform_driver_unregister(&i2c_pnx_driver);
}
-MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
+MODULE_AUTHOR("Vitaly Wool");
+MODULE_AUTHOR("Dennis Kovalev <source@mvista.com>");
MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pnx-i2c");
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 2e3e1bb75013..9e883474db8c 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -583,13 +583,14 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR);
}
- rcar_i2c_write(priv, ICSSR, ~SAR & 0xff);
+ /* Clear SSR, too, because of old STOPs to other clients than us */
+ rcar_i2c_write(priv, ICSSR, ~(SAR | SSR) & 0xff);
}
/* master sent stop */
if (ssr_filtered & SSR) {
i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
- rcar_i2c_write(priv, ICSIER, SAR | SSR);
+ rcar_i2c_write(priv, ICSIER, SAR);
rcar_i2c_write(priv, ICSSR, ~SSR & 0xff);
}
@@ -853,7 +854,7 @@ static int rcar_reg_slave(struct i2c_client *slave)
priv->slave = slave;
rcar_i2c_write(priv, ICSAR, slave->addr);
rcar_i2c_write(priv, ICSSR, 0);
- rcar_i2c_write(priv, ICSIER, SAR | SSR);
+ rcar_i2c_write(priv, ICSIER, SAR);
rcar_i2c_write(priv, ICSCR, SIE | SDBS);
return 0;
@@ -865,12 +866,14 @@ static int rcar_unreg_slave(struct i2c_client *slave)
WARN_ON(!priv->slave);
- /* disable irqs and ensure none is running before clearing ptr */
+ /* ensure no irq is running before clearing ptr */
+ disable_irq(priv->irq);
rcar_i2c_write(priv, ICSIER, 0);
- rcar_i2c_write(priv, ICSCR, 0);
+ rcar_i2c_write(priv, ICSSR, 0);
+ enable_irq(priv->irq);
+ rcar_i2c_write(priv, ICSCR, SDBS);
rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
- synchronize_irq(priv->irq);
priv->slave = NULL;
pm_runtime_put(rcar_i2c_priv_to_dev(priv));
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 15324bfbc6cb..8e3cc85d1921 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -1040,8 +1041,21 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num)
return ret;
}
-static int rk3x_i2c_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs, int num)
+static int rk3x_i2c_wait_xfer_poll(struct rk3x_i2c *i2c)
+{
+ ktime_t timeout = ktime_add_ms(ktime_get(), WAIT_TIMEOUT);
+
+ while (READ_ONCE(i2c->busy) &&
+ ktime_compare(ktime_get(), timeout) < 0) {
+ udelay(5);
+ rk3x_i2c_irq(0, i2c);
+ }
+
+ return !i2c->busy;
+}
+
+static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num, bool polling)
{
struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
unsigned long timeout, flags;
@@ -1075,8 +1089,12 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
rk3x_i2c_start(i2c);
- timeout = wait_event_timeout(i2c->wait, !i2c->busy,
- msecs_to_jiffies(WAIT_TIMEOUT));
+ if (!polling) {
+ timeout = wait_event_timeout(i2c->wait, !i2c->busy,
+ msecs_to_jiffies(WAIT_TIMEOUT));
+ } else {
+ timeout = rk3x_i2c_wait_xfer_poll(i2c);
+ }
spin_lock_irqsave(&i2c->lock, flags);
@@ -1110,6 +1128,18 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
return ret < 0 ? ret : num;
}
+static int rk3x_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ return rk3x_i2c_xfer_common(adap, msgs, num, false);
+}
+
+static int rk3x_i2c_xfer_polling(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ return rk3x_i2c_xfer_common(adap, msgs, num, true);
+}
+
static __maybe_unused int rk3x_i2c_resume(struct device *dev)
{
struct rk3x_i2c *i2c = dev_get_drvdata(dev);
@@ -1126,6 +1156,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap)
static const struct i2c_algorithm rk3x_i2c_algorithm = {
.master_xfer = rk3x_i2c_xfer,
+ .master_xfer_atomic = rk3x_i2c_xfer_polling,
.functionality = rk3x_i2c_func,
};
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 2cca1b21e26e..cab725559999 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -932,6 +932,7 @@ static void __exit sh_mobile_i2c_adap_exit(void)
module_exit(sh_mobile_i2c_adap_exit);
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
-MODULE_AUTHOR("Magnus Damm and Wolfram Sang");
+MODULE_AUTHOR("Magnus Damm");
+MODULE_AUTHOR("Wolfram Sang");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:i2c-sh_mobile");
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 9dcea2ba7168..8f71f01cb169 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -180,6 +180,7 @@ static void __exit i2c_sibyte_exit(void)
module_init(i2c_sibyte_init);
module_exit(i2c_sibyte_exit);
-MODULE_AUTHOR("Kip Walker (Broadcom Corp.), Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Kip Walker (Broadcom Corp.)");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
MODULE_DESCRIPTION("SMBus adapter routines for SiByte boards");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index d7f72ec331e8..30db8fafe078 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -470,6 +470,6 @@ static struct platform_driver i2c_sirfsoc_driver = {
module_platform_driver(i2c_sirfsoc_driver);
MODULE_DESCRIPTION("SiRF SoC I2C master controller driver");
-MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, "
- "Xiangzhen Ye <Xiangzhen.Ye@csr.com>");
+MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>");
+MODULE_AUTHOR("Xiangzhen Ye <Xiangzhen.Ye@csr.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index c9a3dba6a75d..31be1811d5e6 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -398,8 +398,7 @@ static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id)
if (i2c->state == STATE_READ)
goto prepare_read;
-
- /* fall through */
+ fallthrough;
case STATE_WRITE:
if (bsr & SYNQUACER_I2C_BSR_LRB) {
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 15772964a05f..00d3e4d7a01e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -293,6 +293,8 @@ struct tegra_i2c_dev {
bool is_curr_atomic_xfer;
};
+static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit);
+
static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned long reg)
{
@@ -419,7 +421,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
dma_addr_t dma_phys;
int err;
- if (!i2c_dev->hw->has_apb_dma)
+ if (!i2c_dev->hw->has_apb_dma || i2c_dev->is_vi)
return 0;
if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
@@ -655,32 +657,47 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
if (ret)
return ret;
- if (!i2c_dev->hw->has_single_clk_source) {
- ret = clk_enable(i2c_dev->fast_clk);
- if (ret < 0) {
- dev_err(i2c_dev->dev,
- "Enabling fast clk failed, err %d\n", ret);
- return ret;
- }
+ ret = clk_enable(i2c_dev->fast_clk);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev,
+ "Enabling fast clk failed, err %d\n", ret);
+ return ret;
}
- if (i2c_dev->slow_clk) {
- ret = clk_enable(i2c_dev->slow_clk);
- if (ret < 0) {
- dev_err(dev, "failed to enable slow clock: %d\n", ret);
- return ret;
- }
+ ret = clk_enable(i2c_dev->slow_clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable slow clock: %d\n", ret);
+ goto disable_fast_clk;
}
ret = clk_enable(i2c_dev->div_clk);
if (ret < 0) {
dev_err(i2c_dev->dev,
"Enabling div clk failed, err %d\n", ret);
- clk_disable(i2c_dev->fast_clk);
- return ret;
+ goto disable_slow_clk;
+ }
+
+ /*
+ * VI I2C device is attached to VE power domain which goes through
+ * power ON/OFF during PM runtime resume/suspend. So, controller
+ * should go through reset and need to re-initialize after power
+ * domain ON.
+ */
+ if (i2c_dev->is_vi) {
+ ret = tegra_i2c_init(i2c_dev, true);
+ if (ret)
+ goto disable_div_clk;
}
return 0;
+
+disable_div_clk:
+ clk_disable(i2c_dev->div_clk);
+disable_slow_clk:
+ clk_disable(i2c_dev->slow_clk);
+disable_fast_clk:
+ clk_disable(i2c_dev->fast_clk);
+ return ret;
}
static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
@@ -688,12 +705,8 @@ static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
clk_disable(i2c_dev->div_clk);
-
- if (i2c_dev->slow_clk)
- clk_disable(i2c_dev->slow_clk);
-
- if (!i2c_dev->hw->has_single_clk_source)
- clk_disable(i2c_dev->fast_clk);
+ clk_disable(i2c_dev->slow_clk);
+ clk_disable(i2c_dev->fast_clk);
return pinctrl_pm_select_idle_state(i2c_dev->dev);
}
@@ -1716,20 +1729,16 @@ static int tegra_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c_dev);
- if (!i2c_dev->hw->has_single_clk_source) {
- ret = clk_prepare(i2c_dev->fast_clk);
- if (ret < 0) {
- dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
- return ret;
- }
+ ret = clk_prepare(i2c_dev->fast_clk);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+ return ret;
}
- if (i2c_dev->slow_clk) {
- ret = clk_prepare(i2c_dev->slow_clk);
- if (ret < 0) {
- dev_err(dev, "failed to prepare slow clock: %d\n", ret);
- goto unprepare_fast_clk;
- }
+ ret = clk_prepare(i2c_dev->slow_clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to prepare slow clock: %d\n", ret);
+ goto unprepare_fast_clk;
}
if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
@@ -1750,7 +1759,15 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto unprepare_slow_clk;
}
- pm_runtime_irq_safe(&pdev->dev);
+ /*
+ * VI I2C is in VE power domain which is not always on and not
+ * an IRQ safe. So, IRQ safe device can't be attached to a non-IRQ
+ * safe domain as it prevents powering off the PM domain.
+ * Also, VI I2C device don't need to use runtime IRQ safe as it will
+ * not be used for atomic transfers.
+ */
+ if (!i2c_dev->is_vi)
+ pm_runtime_irq_safe(&pdev->dev);
pm_runtime_enable(&pdev->dev);
if (!pm_runtime_enabled(&pdev->dev)) {
ret = tegra_i2c_runtime_resume(&pdev->dev);
@@ -1835,12 +1852,10 @@ unprepare_div_clk:
clk_unprepare(i2c_dev->div_clk);
unprepare_slow_clk:
- if (i2c_dev->is_vi)
- clk_unprepare(i2c_dev->slow_clk);
+ clk_unprepare(i2c_dev->slow_clk);
unprepare_fast_clk:
- if (!i2c_dev->hw->has_single_clk_source)
- clk_unprepare(i2c_dev->fast_clk);
+ clk_unprepare(i2c_dev->fast_clk);
return ret;
}
@@ -1859,12 +1874,8 @@ static int tegra_i2c_remove(struct platform_device *pdev)
tegra_i2c_runtime_suspend(&pdev->dev);
clk_unprepare(i2c_dev->div_clk);
-
- if (i2c_dev->slow_clk)
- clk_unprepare(i2c_dev->slow_clk);
-
- if (!i2c_dev->hw->has_single_clk_source)
- clk_unprepare(i2c_dev->fast_clk);
+ clk_unprepare(i2c_dev->slow_clk);
+ clk_unprepare(i2c_dev->fast_clk);
tegra_i2c_release_dma(i2c_dev);
return 0;
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 4abc7771af06..970ccdcbb889 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -228,7 +228,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
goto exit_unsupported;
if (read_write == I2C_SMBUS_READ)
outb_p(data->block[0], SMBHSTDAT0);
- /* Fall through */
+ fallthrough;
case I2C_SMBUS_BLOCK_DATA:
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
@@ -489,9 +489,9 @@ static void __exit i2c_vt596_exit(void)
}
}
-MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
- "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
- "Jean Delvare <jdelvare@suse.de>");
+MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("vt82c596 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index bd9afa383d12..7b42a18bd05c 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -151,7 +151,7 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
case state_repeat_start:
outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
- /* fallthrough */
+ fallthrough;
case state_quick:
if (iface->address_byte & 1) {
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 26f03a14a478..34a9609f256d 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -32,6 +32,7 @@
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeirq.h>
@@ -181,6 +182,8 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
if (bri->prepare_recovery)
bri->prepare_recovery(adap);
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
/*
* If we can set SDA, we will always create a STOP to ensure additional
@@ -236,6 +239,8 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
if (bri->unprepare_recovery)
bri->unprepare_recovery(adap);
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_default);
return ret;
}
@@ -251,13 +256,135 @@ int i2c_recover_bus(struct i2c_adapter *adap)
}
EXPORT_SYMBOL_GPL(i2c_recover_bus);
-static void i2c_init_recovery(struct i2c_adapter *adap)
+static void i2c_gpio_init_pinctrl_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ struct device *dev = &adap->dev;
+ struct pinctrl *p = bri->pinctrl;
+
+ /*
+ * we can't change states without pinctrl, so remove the states if
+ * populated
+ */
+ if (!p) {
+ bri->pins_default = NULL;
+ bri->pins_gpio = NULL;
+ return;
+ }
+
+ if (!bri->pins_default) {
+ bri->pins_default = pinctrl_lookup_state(p,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(bri->pins_default)) {
+ dev_dbg(dev, PINCTRL_STATE_DEFAULT " state not found for GPIO recovery\n");
+ bri->pins_default = NULL;
+ }
+ }
+ if (!bri->pins_gpio) {
+ bri->pins_gpio = pinctrl_lookup_state(p, "gpio");
+ if (IS_ERR(bri->pins_gpio))
+ bri->pins_gpio = pinctrl_lookup_state(p, "recovery");
+
+ if (IS_ERR(bri->pins_gpio)) {
+ dev_dbg(dev, "no gpio or recovery state found for GPIO recovery\n");
+ bri->pins_gpio = NULL;
+ }
+ }
+
+ /* for pinctrl state changes, we need all the information */
+ if (bri->pins_default && bri->pins_gpio) {
+ dev_info(dev, "using pinctrl states for GPIO recovery");
+ } else {
+ bri->pinctrl = NULL;
+ bri->pins_default = NULL;
+ bri->pins_gpio = NULL;
+ }
+}
+
+static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ struct device *dev = &adap->dev;
+ struct gpio_desc *gpiod;
+ int ret = 0;
+
+ /*
+ * don't touch the recovery information if the driver is not using
+ * generic SCL recovery
+ */
+ if (bri->recover_bus && bri->recover_bus != i2c_generic_scl_recovery)
+ return 0;
+
+ /*
+ * pins might be taken as GPIO, so we should inform pinctrl about
+ * this and move the state to GPIO
+ */
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
+
+ /*
+ * if there is incomplete or no recovery information, see if generic
+ * GPIO recovery is available
+ */
+ if (!bri->scl_gpiod) {
+ gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto cleanup_pinctrl_state;
+ }
+ if (!IS_ERR(gpiod)) {
+ bri->scl_gpiod = gpiod;
+ bri->recover_bus = i2c_generic_scl_recovery;
+ dev_info(dev, "using generic GPIOs for recovery\n");
+ }
+ }
+
+ /* SDA GPIOD line is optional, so we care about DEFER only */
+ if (!bri->sda_gpiod) {
+ /*
+ * We have SCL. Pull SCL low and wait a bit so that SDA glitches
+ * have no effect.
+ */
+ gpiod_direction_output(bri->scl_gpiod, 0);
+ udelay(10);
+ gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN);
+
+ /* Wait a bit in case of a SDA glitch, and then release SCL. */
+ udelay(10);
+ gpiod_direction_output(bri->scl_gpiod, 1);
+
+ if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto cleanup_pinctrl_state;
+ }
+ if (!IS_ERR(gpiod))
+ bri->sda_gpiod = gpiod;
+ }
+
+cleanup_pinctrl_state:
+ /* change the state of the pins back to their default state */
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_default);
+
+ return ret;
+}
+
+static int i2c_gpio_init_recovery(struct i2c_adapter *adap)
+{
+ i2c_gpio_init_pinctrl_recovery(adap);
+ return i2c_gpio_init_generic_recovery(adap);
+}
+
+static int i2c_init_recovery(struct i2c_adapter *adap)
{
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
char *err_str;
if (!bri)
- return;
+ return 0;
+
+ if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
if (!bri->recover_bus) {
err_str = "no recover_bus() found";
@@ -273,10 +400,7 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
if (gpiod_get_direction(bri->sda_gpiod) == 0)
bri->set_sda = set_sda_gpio_value;
}
- return;
- }
-
- if (bri->recover_bus == i2c_generic_scl_recovery) {
+ } else if (bri->recover_bus == i2c_generic_scl_recovery) {
/* Generic SCL recovery */
if (!bri->set_scl || !bri->get_scl) {
err_str = "no {get|set}_scl() found";
@@ -288,10 +412,12 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
}
}
- return;
+ return 0;
err:
dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
adap->bus_recovery_info = NULL;
+
+ return -EINVAL;
}
static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
@@ -319,11 +445,9 @@ static int i2c_device_probe(struct device *dev)
if (!client)
return 0;
- driver = to_i2c_driver(dev->driver);
-
client->irq = client->init_irq;
- if (!client->irq && !driver->disable_i2c_core_irq_mapping) {
+ if (!client->irq) {
int irq = -ENOENT;
if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
@@ -349,6 +473,8 @@ static int i2c_device_probe(struct device *dev)
client->irq = irq;
}
+ driver = to_i2c_driver(dev->driver);
+
/*
* An I2C ID table is not mandatory, if and only if, a suitable OF
* or ACPI ID table is supplied for the probing device.
@@ -1227,7 +1353,7 @@ static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
return 0;
- domain = irq_domain_create_linear(adap->dev.fwnode,
+ domain = irq_domain_create_linear(adap->dev.parent->fwnode,
I2C_ADDR_7BITS_COUNT,
&i2c_host_notify_irq_ops, adap);
if (!domain)
@@ -1318,12 +1444,16 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
if (res)
goto out_reg;
- dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
-
pm_runtime_no_callbacks(&adap->dev);
pm_suspend_ignore_children(&adap->dev, true);
pm_runtime_enable(&adap->dev);
+ res = i2c_init_recovery(adap);
+ if (res == -EPROBE_DEFER)
+ goto out_reg;
+
+ dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
+
#ifdef CONFIG_I2C_COMPAT
res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
adap->dev.parent);
@@ -1332,8 +1462,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
"Failed to create compatibility class link\n");
#endif
- i2c_init_recovery(adap);
-
/* create pre-declared device nodes */
of_i2c_register_devices(adap);
i2c_acpi_register_devices(adap);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index da020acc9bbd..6ceb11cc4be1 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -761,8 +761,8 @@ static void __exit i2c_dev_exit(void)
unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
}
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
- "Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C /dev entries driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index 593f2fd39d17..5c7ae421cacf 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -66,7 +66,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
case I2C_SLAVE_READ_PROCESSED:
/* The previous byte made it to the bus, get next one */
eeprom->buffer_idx++;
- /* fallthrough */
+ fallthrough;
case I2C_SLAVE_READ_REQUESTED:
spin_lock(&eeprom->buffer_lock);
*val = eeprom->buffer[eeprom->buffer_idx & eeprom->address_mask];
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 4e7714c88f95..fc55ea41d323 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -231,7 +231,6 @@ enum i2c_alert_protocol {
* @detect: Callback for device detection
* @address_list: The I2C addresses to probe (for detect)
* @clients: List of detected clients we created (for i2c-core use only)
- * @disable_i2c_core_irq_mapping: Tell the i2c-core to not do irq-mapping
*
* The driver.owner field should be set to the module owner of this driver.
* The driver.name field should be set to the name of this driver.
@@ -290,8 +289,6 @@ struct i2c_driver {
int (*detect)(struct i2c_client *client, struct i2c_board_info *info);
const unsigned short *address_list;
struct list_head clients;
-
- bool disable_i2c_core_irq_mapping;
};
#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
@@ -609,6 +606,14 @@ struct i2c_timings {
* may configure padmux here for SDA/SCL line or something else they want.
* @scl_gpiod: gpiod of the SCL line. Only required for GPIO recovery.
* @sda_gpiod: gpiod of the SDA line. Only required for GPIO recovery.
+ * @pinctrl: pinctrl used by GPIO recovery to change the state of the I2C pins.
+ * Optional.
+ * @pins_default: default pinctrl state of SCL/SDA lines, when they are assigned
+ * to the I2C bus. Optional. Populated internally for GPIO recovery, if
+ * state with the name PINCTRL_STATE_DEFAULT is found and pinctrl is valid.
+ * @pins_gpio: recovery pinctrl state of SCL/SDA lines, when they are used as
+ * GPIOs. Optional. Populated internally for GPIO recovery, if this state
+ * is called "gpio" or "recovery" and pinctrl is valid.
*/
struct i2c_bus_recovery_info {
int (*recover_bus)(struct i2c_adapter *adap);
@@ -625,6 +630,9 @@ struct i2c_bus_recovery_info {
/* gpio recovery */
struct gpio_desc *scl_gpiod;
struct gpio_desc *sda_gpiod;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_gpio;
};
int i2c_recover_bus(struct i2c_adapter *adap);