summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/remoteproc/Kconfig11
-rw-r--r--drivers/remoteproc/Makefile1
-rw-r--r--drivers/remoteproc/imx_dsp_rproc.c1206
3 files changed, 1218 insertions, 0 deletions
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index dcb87a366ec7..f2e961f998ca 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -34,6 +34,17 @@ config IMX_REMOTEPROC
It's safe to say N here.
+config IMX_DSP_REMOTEPROC
+ tristate "i.MX DSP remoteproc support"
+ depends on ARCH_MXC
+ depends on HAVE_ARM_SMCCC
+ select MAILBOX
+ help
+ Say y here to support iMX's DSP remote processors via the remote
+ processor framework.
+
+ It's safe to say N here.
+
config INGENIC_VPU_RPROC
tristate "Ingenic JZ47xx VPU remoteproc support"
depends on MIPS || COMPILE_TEST
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index ce1abeb30907..0ac256b6c977 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -12,6 +12,7 @@ remoteproc-y += remoteproc_virtio.o
remoteproc-y += remoteproc_elf_loader.o
obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
+obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o
obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
new file mode 100644
index 000000000000..63749cfcf22f
--- /dev/null
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -0,0 +1,1206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2021 NXP
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/arm-smccc.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/remoteproc.h>
+#include <linux/slab.h>
+
+#include "imx_rproc.h"
+#include "remoteproc_elf_helpers.h"
+#include "remoteproc_internal.h"
+
+#define DSP_RPROC_CLK_MAX 5
+
+#define REMOTE_IS_READY BIT(0)
+#define REMOTE_READY_WAIT_MAX_RETRIES 500
+
+/* att flags */
+/* DSP own area */
+#define ATT_OWN BIT(31)
+/* DSP instruction area */
+#define ATT_IRAM BIT(30)
+
+/* Definitions for i.MX8MP */
+/* DAP registers */
+#define IMX8M_DAP_DEBUG 0x28800000
+#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
+#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
+#define IMX8M_PWRCTL_CORERESET BIT(16)
+
+/* DSP audio mix registers */
+#define IMX8M_AudioDSP_REG0 0x100
+#define IMX8M_AudioDSP_REG1 0x104
+#define IMX8M_AudioDSP_REG2 0x108
+#define IMX8M_AudioDSP_REG3 0x10c
+
+#define IMX8M_AudioDSP_REG2_RUNSTALL BIT(5)
+#define IMX8M_AudioDSP_REG2_PWAITMODE BIT(1)
+
+/* Definitions for i.MX8ULP */
+#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0 0x8
+#define IMX8ULP_SYSCTRL0_DSP_DBG_RST BIT(25)
+#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN BIT(19)
+#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN BIT(18)
+#define IMX8ULP_SYSCTRL0_DSP_CLK_EN BIT(17)
+#define IMX8ULP_SYSCTRL0_DSP_RST BIT(16)
+#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT BIT(14)
+#define IMX8ULP_SYSCTRL0_DSP_STALL BIT(13)
+
+#define IMX8ULP_SIP_HIFI_XRDC 0xc200000e
+
+/*
+ * enum - Predefined Mailbox Messages
+ *
+ * @RP_MBOX_SUSPEND_SYSTEM: system suspend request for the remote processor
+ *
+ * @RP_MBOX_SUSPEND_ACK: successful response from remote processor for a
+ * suspend request
+ *
+ * @RP_MBOX_RESUME_SYSTEM: system resume request for the remote processor
+ *
+ * @RP_MBOX_RESUME_ACK: successful response from remote processor for a
+ * resume request
+ */
+enum imx_dsp_rp_mbox_messages {
+ RP_MBOX_SUSPEND_SYSTEM = 0xFF11,
+ RP_MBOX_SUSPEND_ACK = 0xFF12,
+ RP_MBOX_RESUME_SYSTEM = 0xFF13,
+ RP_MBOX_RESUME_ACK = 0xFF14,
+};
+
+/**
+ * struct imx_dsp_rproc - DSP remote processor state
+ * @regmap: regmap handler
+ * @rproc: rproc handler
+ * @dsp_dcfg: device configuration pointer
+ * @clks: clocks needed by this device
+ * @cl: mailbox client to request the mailbox channel
+ * @cl_rxdb: mailbox client to request the mailbox channel for doorbell
+ * @tx_ch: mailbox tx channel handle
+ * @rx_ch: mailbox rx channel handle
+ * @rxdb_ch: mailbox rx doorbell channel handle
+ * @pd_dev: power domain device
+ * @pd_dev_link: power domain device link
+ * @ipc_handle: System Control Unit ipc handle
+ * @rproc_work: work for processing virtio interrupts
+ * @pm_comp: completion primitive to sync for suspend response
+ * @num_domains: power domain number
+ * @flags: control flags
+ */
+struct imx_dsp_rproc {
+ struct regmap *regmap;
+ struct rproc *rproc;
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg;
+ struct clk_bulk_data clks[DSP_RPROC_CLK_MAX];
+ struct mbox_client cl;
+ struct mbox_client cl_rxdb;
+ struct mbox_chan *tx_ch;
+ struct mbox_chan *rx_ch;
+ struct mbox_chan *rxdb_ch;
+ struct device **pd_dev;
+ struct device_link **pd_dev_link;
+ struct imx_sc_ipc *ipc_handle;
+ struct work_struct rproc_work;
+ struct completion pm_comp;
+ int num_domains;
+ u32 flags;
+};
+
+/**
+ * struct imx_dsp_rproc_dcfg - DSP remote processor configuration
+ * @dcfg: imx_rproc_dcfg handler
+ * @reset: reset callback function
+ */
+struct imx_dsp_rproc_dcfg {
+ const struct imx_rproc_dcfg *dcfg;
+ int (*reset)(struct imx_dsp_rproc *priv);
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8qm[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
+ { 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
+ { 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+ { 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x80000000, 0x80000000, 0x60000000, 0},
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
+ { 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
+ { 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+ { 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x80000000, 0x80000000, 0x60000000, 0},
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8mp[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
+ { 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
+ { 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+ { 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x40000000, 0x40000000, 0x80000000, 0},
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
+ { 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x0c000000, 0x80000000, 0x10000000, 0},
+ { 0x30000000, 0x90000000, 0x10000000, 0},
+};
+
+/* Reset function for DSP on i.MX8MP */
+static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
+{
+ void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
+ int pwrctl;
+
+ /* Put DSP into reset and stall */
+ pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
+ pwrctl |= IMX8M_PWRCTL_CORERESET;
+ writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
+
+ /* Keep reset asserted for 10 cycles */
+ usleep_range(1, 2);
+
+ regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
+ IMX8M_AudioDSP_REG2_RUNSTALL,
+ IMX8M_AudioDSP_REG2_RUNSTALL);
+
+ /* Take the DSP out of reset and keep stalled for FW loading */
+ pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
+ pwrctl &= ~IMX8M_PWRCTL_CORERESET;
+ writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
+
+ iounmap(dap);
+ return 0;
+}
+
+/* Reset function for DSP on i.MX8ULP */
+static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
+{
+ struct arm_smccc_res res;
+
+ /* Put DSP into reset and stall */
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_STALL,
+ IMX8ULP_SYSCTRL0_DSP_STALL);
+
+ /* Configure resources of DSP through TFA */
+ arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
+
+ /* Take the DSP out of reset and keep stalled for FW loading */
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_RST, 0);
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
+
+ return 0;
+}
+
+/* Specific configuration for i.MX8MP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
+ .src_reg = IMX8M_AudioDSP_REG2,
+ .src_mask = IMX8M_AudioDSP_REG2_RUNSTALL,
+ .src_start = 0,
+ .src_stop = IMX8M_AudioDSP_REG2_RUNSTALL,
+ .att = imx_dsp_rproc_att_imx8mp,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
+ .method = IMX_RPROC_MMIO,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
+ .dcfg = &dsp_rproc_cfg_imx8mp,
+ .reset = imx8mp_dsp_reset,
+};
+
+/* Specific configuration for i.MX8ULP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8ulp = {
+ .src_reg = IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ .src_mask = IMX8ULP_SYSCTRL0_DSP_STALL,
+ .src_start = 0,
+ .src_stop = IMX8ULP_SYSCTRL0_DSP_STALL,
+ .att = imx_dsp_rproc_att_imx8ulp,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
+ .method = IMX_RPROC_MMIO,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
+ .dcfg = &dsp_rproc_cfg_imx8ulp,
+ .reset = imx8ulp_dsp_reset,
+};
+
+/* Specific configuration for i.MX8QXP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qxp = {
+ .att = imx_dsp_rproc_att_imx8qxp,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
+ .method = IMX_RPROC_SCU_API,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
+ .dcfg = &dsp_rproc_cfg_imx8qxp,
+};
+
+/* Specific configuration for i.MX8QM */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qm = {
+ .att = imx_dsp_rproc_att_imx8qm,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
+ .method = IMX_RPROC_SCU_API,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
+ .dcfg = &dsp_rproc_cfg_imx8qm,
+};
+
+static int imx_dsp_rproc_ready(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ int i;
+
+ if (!priv->rxdb_ch)
+ return 0;
+
+ for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
+ if (priv->flags & REMOTE_IS_READY)
+ return 0;
+ usleep_range(100, 200);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * Start function for rproc_ops
+ *
+ * There is a handshake for start procedure: when DSP starts, it
+ * will send a doorbell message to this driver, then the
+ * REMOTE_IS_READY flags is set, then driver will kick
+ * a message to DSP.
+ */
+static int imx_dsp_rproc_start(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+ const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+ struct device *dev = rproc->dev.parent;
+ int ret;
+
+ switch (dcfg->method) {
+ case IMX_RPROC_MMIO:
+ ret = regmap_update_bits(priv->regmap,
+ dcfg->src_reg,
+ dcfg->src_mask,
+ dcfg->src_start);
+ break;
+ case IMX_RPROC_SCU_API:
+ ret = imx_sc_pm_cpu_start(priv->ipc_handle,
+ IMX_SC_R_DSP,
+ true,
+ rproc->bootaddr);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (ret)
+ dev_err(dev, "Failed to enable remote core!\n");
+ else
+ ret = imx_dsp_rproc_ready(rproc);
+
+ return ret;
+}
+
+/*
+ * Stop function for rproc_ops
+ * It clears the REMOTE_IS_READY flags
+ */
+static int imx_dsp_rproc_stop(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+ const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+ struct device *dev = rproc->dev.parent;
+ int ret = 0;
+
+ /* Make sure work is finished */
+ flush_work(&priv->rproc_work);
+
+ if (rproc->state == RPROC_CRASHED) {
+ priv->flags &= ~REMOTE_IS_READY;
+ return 0;
+ }
+
+ switch (dcfg->method) {
+ case IMX_RPROC_MMIO:
+ ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
+ dcfg->src_stop);
+ break;
+ case IMX_RPROC_SCU_API:
+ ret = imx_sc_pm_cpu_start(priv->ipc_handle,
+ IMX_SC_R_DSP,
+ false,
+ rproc->bootaddr);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (ret)
+ dev_err(dev, "Failed to stop remote core\n");
+ else
+ priv->flags &= ~REMOTE_IS_READY;
+
+ return ret;
+}
+
+/**
+ * imx_dsp_rproc_sys_to_da() - internal memory translation helper
+ * @priv: private data pointer
+ * @sys: system address (DDR address)
+ * @len: length of the memory buffer
+ * @da: device address to translate
+ *
+ * Convert system address (DDR address) to device address (DSP)
+ * for there may be memory remap for device.
+ */
+static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
+ size_t len, u64 *da)
+{
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+ const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+ int i;
+
+ /* Parse address translation table */
+ for (i = 0; i < dcfg->att_size; i++) {
+ const struct imx_rproc_att *att = &dcfg->att[i];
+
+ if (sys >= att->sa && sys + len <= att->sa + att->size) {
+ unsigned int offset = sys - att->sa;
+
+ *da = att->da + offset;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+/* Main virtqueue message work function
+ *
+ * This function is executed upon scheduling of the i.MX DSP remoteproc
+ * driver's workqueue. The workqueue is scheduled by the mailbox rx
+ * handler.
+ *
+ * This work function processes both the Tx and Rx virtqueue indices on
+ * every invocation. The rproc_vq_interrupt function can detect if there
+ * are new unprocessed messages or not (returns IRQ_NONE vs IRQ_HANDLED),
+ * but there is no need to check for these return values. The index 0
+ * triggering will process all pending Rx buffers, and the index 1 triggering
+ * will process all newly available Tx buffers and will wakeup any potentially
+ * blocked senders.
+ *
+ * NOTE:
+ * The current logic is based on an inherent design assumption of supporting
+ * only 2 vrings, but this can be changed if needed.
+ */
+static void imx_dsp_rproc_vq_work(struct work_struct *work)
+{
+ struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
+ rproc_work);
+
+ rproc_vq_interrupt(priv->rproc, 0);
+ rproc_vq_interrupt(priv->rproc, 1);
+}
+
+/**
+ * imx_dsp_rproc_rx_tx_callback() - inbound mailbox message handler
+ * @cl: mailbox client pointer used for requesting the mailbox channel
+ * @data: mailbox payload
+ *
+ * This handler is invoked by mailbox driver whenever a mailbox
+ * message is received. Usually, the SUSPEND and RESUME related messages
+ * are handled in this function, other messages are handled by remoteproc core
+ */
+static void imx_dsp_rproc_rx_tx_callback(struct mbox_client *cl, void *data)
+{
+ struct rproc *rproc = dev_get_drvdata(cl->dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+ struct device *dev = rproc->dev.parent;
+ u32 message = (u32)(*(u32 *)data);
+
+ dev_dbg(dev, "mbox msg: 0x%x\n", message);
+
+ switch (message) {
+ case RP_MBOX_SUSPEND_ACK:
+ complete(&priv->pm_comp);
+ break;
+ case RP_MBOX_RESUME_ACK:
+ complete(&priv->pm_comp);
+ break;
+ default:
+ schedule_work(&priv->rproc_work);
+ break;
+ }
+}
+
+/**
+ * imx_dsp_rproc_rxdb_callback() - inbound mailbox message handler
+ * @cl: mailbox client pointer used for requesting the mailbox channel
+ * @data: mailbox payload
+ *
+ * For doorbell, there is no message specified, just set REMOTE_IS_READY
+ * flag.
+ */
+static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *data)
+{
+ struct rproc *rproc = dev_get_drvdata(cl->dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+
+ /* Remote is ready after firmware is loaded and running */
+ priv->flags |= REMOTE_IS_READY;
+}
+
+/**
+ * imx_dsp_rproc_mbox_init() - request mailbox channels
+ * @priv: private data pointer
+ *
+ * Request three mailbox channels (tx, rx, rxdb).
+ */
+static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
+{
+ struct device *dev = priv->rproc->dev.parent;
+ struct mbox_client *cl;
+ int ret;
+
+ if (!of_get_property(dev->of_node, "mbox-names", NULL))
+ return 0;
+
+ cl = &priv->cl;
+ cl->dev = dev;
+ cl->tx_block = true;
+ cl->tx_tout = 100;
+ cl->knows_txdone = false;
+ cl->rx_callback = imx_dsp_rproc_rx_tx_callback;
+
+ /* Channel for sending message */
+ priv->tx_ch = mbox_request_channel_byname(cl, "tx");
+ if (IS_ERR(priv->tx_ch)) {
+ ret = PTR_ERR(priv->tx_ch);
+ dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
+ ret);
+ goto err_out;
+ }
+
+ /* Channel for receiving message */
+ priv->rx_ch = mbox_request_channel_byname(cl, "rx");
+ if (IS_ERR(priv->rx_ch)) {
+ ret = PTR_ERR(priv->rx_ch);
+ dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
+ ret);
+ goto err_out;
+ }
+
+ cl = &priv->cl_rxdb;
+ cl->dev = dev;
+ cl->rx_callback = imx_dsp_rproc_rxdb_callback;
+
+ /*
+ * RX door bell is used to receive the ready signal from remote
+ * after firmware loaded.
+ */
+ priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
+ if (IS_ERR(priv->rxdb_ch)) {
+ ret = PTR_ERR(priv->rxdb_ch);
+ dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
+ ret);
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ if (!IS_ERR(priv->tx_ch))
+ mbox_free_channel(priv->tx_ch);
+ if (!IS_ERR(priv->rx_ch))
+ mbox_free_channel(priv->rx_ch);
+ if (!IS_ERR(priv->rxdb_ch))
+ mbox_free_channel(priv->rxdb_ch);
+
+ return ret;
+}
+
+static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
+{
+ mbox_free_channel(priv->tx_ch);
+ mbox_free_channel(priv->rx_ch);
+ mbox_free_channel(priv->rxdb_ch);
+}
+
+/**
+ * imx_dsp_rproc_add_carveout() - request mailbox channels
+ * @priv: private data pointer
+ *
+ * This function registers specified memory entry in @rproc carveouts list
+ * The carveouts can help to mapping the memory address for DSP.
+ */
+static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
+{
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+ const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+ struct rproc *rproc = priv->rproc;
+ struct device *dev = rproc->dev.parent;
+ struct device_node *np = dev->of_node;
+ struct of_phandle_iterator it;
+ struct rproc_mem_entry *mem;
+ struct reserved_mem *rmem;
+ void __iomem *cpu_addr;
+ int a;
+ u64 da;
+
+ /* Remap required addresses */
+ for (a = 0; a < dcfg->att_size; a++) {
+ const struct imx_rproc_att *att = &dcfg->att[a];
+
+ if (!(att->flags & ATT_OWN))
+ continue;
+
+ if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
+ return -EINVAL;
+
+ cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
+ if (!cpu_addr) {
+ dev_err(dev, "failed to map memory %p\n", &att->sa);
+ return -ENOMEM;
+ }
+
+ /* Register memory region */
+ mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)att->sa,
+ att->size, da, NULL, NULL, "dsp_mem");
+
+ if (mem)
+ rproc_coredump_add_segment(rproc, da, att->size);
+ else
+ return -ENOMEM;
+
+ rproc_add_carveout(rproc, mem);
+ }
+
+ of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
+ while (of_phandle_iterator_next(&it) == 0) {
+ /*
+ * Ignore the first memory region which will be used vdev buffer.
+ * No need to do extra handlings, rproc_add_virtio_dev will handle it.
+ */
+ if (!strcmp(it.node->name, "vdev0buffer"))
+ continue;
+
+ rmem = of_reserved_mem_lookup(it.node);
+ if (!rmem) {
+ dev_err(dev, "unable to acquire memory-region\n");
+ return -EINVAL;
+ }
+
+ if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da))
+ return -EINVAL;
+
+ cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
+ if (!cpu_addr) {
+ dev_err(dev, "failed to map memory %p\n", &rmem->base);
+ return -ENOMEM;
+ }
+
+ /* Register memory region */
+ mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)rmem->base,
+ rmem->size, da, NULL, NULL, it.node->name);
+
+ if (mem)
+ rproc_coredump_add_segment(rproc, da, rmem->size);
+ else
+ return -ENOMEM;
+
+ rproc_add_carveout(rproc, mem);
+ }
+
+ return 0;
+}
+
+/**
+ * imx_dsp_rproc_elf_load_segments() - load firmware segments to memory
+ * @rproc: remote processor which will be booted using these fw segments
+ * @fw: the ELF firmware image
+ *
+ * This function specially checks if memsz is zero or not, otherwise it
+ * is mostly same as rproc_elf_load_segments().
+ */
+static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
+ const struct firmware *fw)
+{
+ struct device *dev = &rproc->dev;
+ u8 class = fw_elf_get_class(fw);
+ u32 elf_phdr_get_size = elf_size_of_phdr(class);
+ const u8 *elf_data = fw->data;
+ const void *ehdr, *phdr;
+ int i, ret = 0;
+ u16 phnum;
+
+ ehdr = elf_data;
+ phnum = elf_hdr_get_e_phnum(class, ehdr);
+ phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
+
+ /* go through the available ELF segments */
+ for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
+ u64 da = elf_phdr_get_p_paddr(class, phdr);
+ u64 memsz = elf_phdr_get_p_memsz(class, phdr);
+ u64 filesz = elf_phdr_get_p_filesz(class, phdr);
+ u64 offset = elf_phdr_get_p_offset(class, phdr);
+ u32 type = elf_phdr_get_p_type(class, phdr);
+ void *ptr;
+
+ /*
+ * There is a case that with PT_LOAD type, the
+ * filesz = memsz = 0. If memsz = 0, rproc_da_to_va
+ * should return NULL ptr, then error is returned.
+ * So this case should be skipped from the loop.
+ * Add !memsz checking here.
+ */
+ if (type != PT_LOAD || !memsz)
+ continue;
+
+ dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
+ type, da, memsz, filesz);
+
+ if (filesz > memsz) {
+ dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
+ filesz, memsz);
+ ret = -EINVAL;
+ break;
+ }
+
+ if (offset + filesz > fw->size) {
+ dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
+ offset + filesz, fw->size);
+ ret = -EINVAL;
+ break;
+ }
+
+ if (!rproc_u64_fit_in_size_t(memsz)) {
+ dev_err(dev, "size (%llx) does not fit in size_t type\n",
+ memsz);
+ ret = -EOVERFLOW;
+ break;
+ }
+
+ /* grab the kernel address for this device address */
+ ptr = rproc_da_to_va(rproc, da, memsz, NULL);
+ if (!ptr) {
+ dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
+ memsz);
+ ret = -EINVAL;
+ break;
+ }
+
+ /* put the segment where the remote processor expects it */
+ if (filesz)
+ memcpy(ptr, elf_data + offset, filesz);
+
+ /*
+ * Zero out remaining memory for this segment.
+ *
+ * This isn't strictly required since dma_alloc_coherent already
+ * did this for us. albeit harmless, we may consider removing
+ * this.
+ */
+ if (memsz > filesz)
+ memset(ptr + filesz, 0, memsz - filesz);
+ }
+
+ return ret;
+}
+
+/* Prepare function for rproc_ops */
+static int imx_dsp_rproc_prepare(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ struct device *dev = rproc->dev.parent;
+ struct rproc_mem_entry *carveout;
+ int ret;
+
+ ret = imx_dsp_rproc_add_carveout(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
+ return ret;
+ }
+
+ pm_runtime_get_sync(dev);
+
+ /*
+ * Clear buffers after pm rumtime for internal ocram is not
+ * accessible if power and clock are not enabled.
+ */
+ list_for_each_entry(carveout, &rproc->carveouts, node) {
+ if (carveout->va)
+ memset(carveout->va, 0, carveout->len);
+ }
+
+ return 0;
+}
+
+/* Unprepare function for rproc_ops */
+static int imx_dsp_rproc_unprepare(struct rproc *rproc)
+{
+ pm_runtime_put_sync(rproc->dev.parent);
+
+ return 0;
+}
+
+/* Kick function for rproc_ops */
+static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ struct device *dev = rproc->dev.parent;
+ int err;
+ __u32 mmsg;
+
+ if (!priv->tx_ch) {
+ dev_err(dev, "No initialized mbox tx channel\n");
+ return;
+ }
+
+ /*
+ * Send the index of the triggered virtqueue as the mu payload.
+ * Let remote processor know which virtqueue is used.
+ */
+ mmsg = vqid;
+
+ err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+ if (err < 0)
+ dev_err(dev, "%s: failed (%d, err:%d)\n", __func__, vqid, err);
+}
+
+static const struct rproc_ops imx_dsp_rproc_ops = {
+ .prepare = imx_dsp_rproc_prepare,
+ .unprepare = imx_dsp_rproc_unprepare,
+ .start = imx_dsp_rproc_start,
+ .stop = imx_dsp_rproc_stop,
+ .kick = imx_dsp_rproc_kick,
+ .load = imx_dsp_rproc_elf_load_segments,
+ .parse_fw = rproc_elf_load_rsc_table,
+ .sanity_check = rproc_elf_sanity_check,
+ .get_boot_addr = rproc_elf_get_boot_addr,
+};
+
+/**
+ * imx_dsp_attach_pm_domains() - attach the power domains
+ * @priv: private data pointer
+ *
+ * On i.MX8QM and i.MX8QXP there is multiple power domains
+ * required, so need to link them.
+ */
+static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
+{
+ struct device *dev = priv->rproc->dev.parent;
+ int ret, i;
+
+ priv->num_domains = of_count_phandle_with_args(dev->of_node,
+ "power-domains",
+ "#power-domain-cells");
+
+ /* If only one domain, then no need to link the device */
+ if (priv->num_domains <= 1)
+ return 0;
+
+ priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
+ sizeof(*priv->pd_dev),
+ GFP_KERNEL);
+ if (!priv->pd_dev)
+ return -ENOMEM;
+
+ priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
+ sizeof(*priv->pd_dev_link),
+ GFP_KERNEL);
+ if (!priv->pd_dev_link)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->num_domains; i++) {
+ priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
+ if (IS_ERR(priv->pd_dev[i])) {
+ ret = PTR_ERR(priv->pd_dev[i]);
+ goto detach_pm;
+ }
+
+ /*
+ * device_link_add will check priv->pd_dev[i], if it is
+ * NULL, then will break.
+ */
+ priv->pd_dev_link[i] = device_link_add(dev,
+ priv->pd_dev[i],
+ DL_FLAG_STATELESS |
+ DL_FLAG_PM_RUNTIME);
+ if (!priv->pd_dev_link[i]) {
+ dev_pm_domain_detach(priv->pd_dev[i], false);
+ ret = -EINVAL;
+ goto detach_pm;
+ }
+ }
+
+ return 0;
+
+detach_pm:
+ while (--i >= 0) {
+ device_link_del(priv->pd_dev_link[i]);
+ dev_pm_domain_detach(priv->pd_dev[i], false);
+ }
+
+ return ret;
+}
+
+static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
+{
+ int i;
+
+ if (priv->num_domains <= 1)
+ return 0;
+
+ for (i = 0; i < priv->num_domains; i++) {
+ device_link_del(priv->pd_dev_link[i]);
+ dev_pm_domain_detach(priv->pd_dev[i], false);
+ }
+
+ return 0;
+}
+
+/**
+ * imx_dsp_rproc_detect_mode() - detect DSP control mode
+ * @priv: private data pointer
+ *
+ * Different platform has different control method for DSP, which depends
+ * on how the DSP is integrated in platform.
+ *
+ * For i.MX8QXP and i.MX8QM, DSP should be started and stopped by System
+ * Control Unit.
+ * For i.MX8MP and i.MX8ULP, DSP should be started and stopped by system
+ * integration module.
+ */
+static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
+{
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+ struct device *dev = priv->rproc->dev.parent;
+ struct regmap *regmap;
+ int ret = 0;
+
+ switch (dsp_dcfg->dcfg->method) {
+ case IMX_RPROC_SCU_API:
+ ret = imx_scu_get_handle(&priv->ipc_handle);
+ if (ret)
+ return ret;
+ break;
+ case IMX_RPROC_MMIO:
+ regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to find syscon\n");
+ return PTR_ERR(regmap);
+ }
+
+ priv->regmap = regmap;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
+ /* DSP clocks */
+ "core", "ocram", "debug", "ipg", "mu",
+};
+
+static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
+{
+ struct device *dev = priv->rproc->dev.parent;
+ struct clk_bulk_data *clks = priv->clks;
+ int i;
+
+ for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
+ clks[i].id = imx_dsp_clks_names[i];
+
+ return devm_clk_bulk_get_optional(dev, DSP_RPROC_CLK_MAX, clks);
+}
+
+static int imx_dsp_rproc_probe(struct platform_device *pdev)
+{
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg;
+ struct device *dev = &pdev->dev;
+ struct imx_dsp_rproc *priv;
+ struct rproc *rproc;
+ const char *fw_name;
+ int ret;
+
+ dsp_dcfg = of_device_get_match_data(dev);
+ if (!dsp_dcfg)
+ return -ENODEV;
+
+ ret = rproc_of_parse_firmware(dev, 0, &fw_name);
+ if (ret) {
+ dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
+ ret);
+ return ret;
+ }
+
+ rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
+ sizeof(*priv));
+ if (!rproc)
+ return -ENOMEM;
+
+ priv = rproc->priv;
+ priv->rproc = rproc;
+ priv->dsp_dcfg = dsp_dcfg;
+
+ dev_set_drvdata(dev, rproc);
+
+ INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
+
+ ret = imx_dsp_rproc_detect_mode(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
+ goto err_put_rproc;
+ }
+
+ /* There are multiple power domains required by DSP on some platform */
+ ret = imx_dsp_attach_pm_domains(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
+ goto err_put_rproc;
+ }
+ /* Get clocks */
+ ret = imx_dsp_rproc_clk_get(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
+ goto err_detach_domains;
+ }
+
+ init_completion(&priv->pm_comp);
+ rproc->auto_boot = false;
+ ret = rproc_add(rproc);
+ if (ret) {
+ dev_err(dev, "rproc_add failed\n");
+ goto err_detach_domains;
+ }
+
+ pm_runtime_enable(dev);
+
+ return 0;
+
+err_detach_domains:
+ imx_dsp_detach_pm_domains(priv);
+err_put_rproc:
+ rproc_free(rproc);
+
+ return ret;
+}
+
+static int imx_dsp_rproc_remove(struct platform_device *pdev)
+{
+ struct rproc *rproc = platform_get_drvdata(pdev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+
+ pm_runtime_disable(&pdev->dev);
+ rproc_del(rproc);
+ imx_dsp_detach_pm_domains(priv);
+ rproc_free(rproc);
+
+ return 0;
+}
+
+/* pm runtime functions */
+static int imx_dsp_runtime_resume(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+ const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+ int ret;
+
+ /*
+ * There is power domain attached with mailbox, if setup mailbox
+ * in probe(), then the power of mailbox is always enabled,
+ * the power can't be saved.
+ * So move setup of mailbox to runtime resume.
+ */
+ ret = imx_dsp_rproc_mbox_init(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
+ return ret;
+ }
+
+ ret = clk_bulk_prepare_enable(DSP_RPROC_CLK_MAX, priv->clks);
+ if (ret) {
+ dev_err(dev, "failed on clk_bulk_prepare_enable\n");
+ return ret;
+ }
+
+ /* Reset DSP if needed */
+ if (dsp_dcfg->reset)
+ dsp_dcfg->reset(priv);
+
+ return 0;
+}
+
+static int imx_dsp_runtime_suspend(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+
+ clk_bulk_disable_unprepare(DSP_RPROC_CLK_MAX, priv->clks);
+
+ imx_dsp_rproc_free_mbox(priv);
+
+ return 0;
+}
+
+static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
+{
+ struct rproc *rproc = context;
+ int ret;
+
+ /*
+ * Same flow as start procedure.
+ * Load the ELF segments to memory firstly.
+ */
+ ret = rproc_load_segments(rproc, fw);
+ if (ret)
+ goto out;
+
+ /* Start the remote processor */
+ ret = rproc->ops->start(rproc);
+ if (ret)
+ goto out;
+
+ rproc->ops->kick(rproc, 0);
+
+out:
+ release_firmware(fw);
+}
+
+static int imx_dsp_suspend(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+ __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
+ int ret;
+
+ if (rproc->state != RPROC_RUNNING)
+ goto out;
+
+ reinit_completion(&priv->pm_comp);
+
+ /* Tell DSP that suspend is happening */
+ ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+ if (ret < 0) {
+ dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * DSP need to save the context at suspend.
+ * Here waiting the response for DSP, then power can be disabled.
+ */
+ if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
+ return -EBUSY;
+
+out:
+ /*
+ * The power of DSP is disabled in suspend, so force pm runtime
+ * to be suspend, then we can reenable the power and clocks at
+ * resume stage.
+ */
+ return pm_runtime_force_suspend(dev);
+}
+
+static int imx_dsp_resume(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ if (rproc->state != RPROC_RUNNING)
+ return 0;
+
+ /*
+ * The power of DSP is disabled at suspend, the memory of dsp
+ * is reset, the image segments are lost. So need to reload
+ * firmware and restart the DSP if it is in running state.
+ */
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
+ rproc->firmware, dev, GFP_KERNEL,
+ rproc, imx_dsp_load_firmware);
+ if (ret < 0) {
+ dev_err(dev, "load firmware failed: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ pm_runtime_force_suspend(dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
+ SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
+ imx_dsp_runtime_resume, NULL)
+};
+
+static const struct of_device_id imx_dsp_rproc_of_match[] = {
+ { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
+ { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
+ { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
+ { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
+ {},
+};
+MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
+
+static struct platform_driver imx_dsp_rproc_driver = {
+ .probe = imx_dsp_rproc_probe,
+ .remove = imx_dsp_rproc_remove,
+ .driver = {
+ .name = "imx-dsp-rproc",
+ .of_match_table = imx_dsp_rproc_of_match,
+ .pm = &imx_dsp_rproc_pm_ops,
+ },
+};
+module_platform_driver(imx_dsp_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
+MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");
generated by cgit (git 2.34.1) at 2024-05-25 10:29:15 +0000