diff options
| -rw-r--r-- | drivers/pinctrl/qcom/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/pinctrl/qcom/pinctrl-sc8180x.c | 123 |
2 files changed, 122 insertions, 3 deletions
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 6853a896c476..9f0218c4f9b3 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -222,7 +222,7 @@ config PINCTRL_SC7280 config PINCTRL_SC8180X tristate "Qualcomm Technologies Inc SC8180x pin controller driver" - depends on GPIOLIB && OF + depends on GPIOLIB && (OF || ACPI) select PINCTRL_MSM help This is the pinctrl, pinmux, pinconf and gpiolib driver for the diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c index b765bf667574..0d9654b4ab60 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c +++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c @@ -23,6 +23,21 @@ enum { WEST }; +/* + * ACPI DSDT has one single memory resource for TLMM. The offsets below are + * used to locate different tiles for ACPI probe. + */ +struct tile_info { + u32 offset; + u32 size; +}; + +static const struct tile_info sc8180x_tile_info[] = { + { 0x00d00000, 0x00300000, }, + { 0x00500000, 0x00700000, }, + { 0x00100000, 0x00300000, }, +}; + #define FUNCTION(fname) \ [msm_mux_##fname] = { \ .name = #fname, \ @@ -1557,6 +1572,13 @@ static const struct msm_pingroup sc8180x_groups[] = { [193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0), }; +static const int sc8180x_acpi_reserved_gpios[] = { + 0, 1, 2, 3, + 47, 48, 49, 50, + 126, 127, 128, 129, + -1 /* terminator */ +}; + static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = { { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 }, { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 }, @@ -1588,13 +1610,109 @@ static struct msm_pinctrl_soc_data sc8180x_pinctrl = { .nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map), }; +static const struct msm_pinctrl_soc_data sc8180x_acpi_pinctrl = { + .tiles = sc8180x_tiles, + .ntiles = ARRAY_SIZE(sc8180x_tiles), + .pins = sc8180x_pins, + .npins = ARRAY_SIZE(sc8180x_pins), + .groups = sc8180x_groups, + .ngroups = ARRAY_SIZE(sc8180x_groups), + .reserved_gpios = sc8180x_acpi_reserved_gpios, + .ngpios = 190, +}; + +/* + * ACPI DSDT has one single memory resource for TLMM, which voilates the + * hardware layout of 3 sepearte tiles. Let's split the memory resource into + * 3 named ones, so that msm_pinctrl_probe() can map memory for ACPI in the + * same way as for DT probe. + */ +static int sc8180x_pinctrl_add_tile_resources(struct platform_device *pdev) +{ + int nres_num = pdev->num_resources + ARRAY_SIZE(sc8180x_tiles) - 1; + struct resource *mres, *nres, *res; + int i, ret; + + /* + * DT already has tiles defined properly, so nothing needs to be done + * for DT probe. + */ + if (pdev->dev.of_node) + return 0; + + /* Allocate for new resources */ + nres = devm_kzalloc(&pdev->dev, sizeof(*nres) * nres_num, GFP_KERNEL); + if (!nres) + return -ENOMEM; + + res = nres; + + for (i = 0; i < pdev->num_resources; i++) { + struct resource *r = &pdev->resource[i]; + + /* Save memory resource and copy others */ + if (resource_type(r) == IORESOURCE_MEM) + mres = r; + else + *res++ = *r; + } + + /* Append tile memory resources */ + for (i = 0; i < ARRAY_SIZE(sc8180x_tiles); i++, res++) { + const struct tile_info *info = &sc8180x_tile_info[i]; + + res->start = mres->start + info->offset; + res->end = mres->start + info->offset + info->size - 1; + res->flags = mres->flags; + res->name = sc8180x_tiles[i]; + + /* Add new MEM to resource tree */ + insert_resource(mres->parent, res); + } + + /* Remove old MEM from resource tree */ + remove_resource(mres); + + /* Free old resources and install new ones */ + ret = platform_device_add_resources(pdev, nres, nres_num); + if (ret) { + dev_err(&pdev->dev, "failed to add new resources: %d\n", ret); + return ret; + } + + return 0; +} + static int sc8180x_pinctrl_probe(struct platform_device *pdev) { - return msm_pinctrl_probe(pdev, &sc8180x_pinctrl); + const struct msm_pinctrl_soc_data *soc_data; + int ret; + + soc_data = device_get_match_data(&pdev->dev); + if (!soc_data) + return -EINVAL; + + ret = sc8180x_pinctrl_add_tile_resources(pdev); + if (ret) + return ret; + + return msm_pinctrl_probe(pdev, soc_data); } +static const struct acpi_device_id sc8180x_pinctrl_acpi_match[] = { + { + .id = "QCOM040D", + .driver_data = (kernel_ulong_t) &sc8180x_acpi_pinctrl, + }, + { } +}; +MODULE_DEVICE_TABLE(acpi, sc8180x_pinctrl_acpi_match); + static const struct of_device_id sc8180x_pinctrl_of_match[] = { - { .compatible = "qcom,sc8180x-tlmm", }, + { + .compatible = "qcom,sc8180x-tlmm", + .data = &sc8180x_pinctrl, + }, { }, }; MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match); @@ -1603,6 +1721,7 @@ static struct platform_driver sc8180x_pinctrl_driver = { .driver = { .name = "sc8180x-pinctrl", .of_match_table = sc8180x_pinctrl_of_match, + .acpi_match_table = sc8180x_pinctrl_acpi_match, }, .probe = sc8180x_pinctrl_probe, .remove = msm_pinctrl_remove, |