summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml20
-rw-r--r--MAINTAINERS7
-rw-r--r--arch/arm/Kconfig45
-rw-r--r--arch/arm/configs/pxa_defconfig3
-rw-r--r--arch/arm/mach-at91/Kconfig1
-rw-r--r--arch/arm/mach-at91/pm.c27
-rw-r--r--arch/arm/mach-at91/pm_suspend.S4
-rw-r--r--arch/arm/mach-bcm/Kconfig1
-rw-r--r--arch/arm/mach-dove/irq.c6
-rw-r--r--arch/arm/mach-exynos/firmware.c4
-rw-r--r--arch/arm/mach-footbridge/include/mach/hardware.h20
-rw-r--r--arch/arm/mach-footbridge/include/mach/io.h20
-rw-r--r--arch/arm/mach-imx/Kconfig7
-rw-r--r--arch/arm/mach-imx/Makefile2
-rw-r--r--arch/arm/mach-imx/mach-imxrt.c19
-rw-r--r--arch/arm/mach-integrator/Kconfig37
-rw-r--r--arch/arm/mach-integrator/hardware.h5
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig57
-rw-r--r--arch/arm/mach-ixp4xx/Makefile19
-rw-r--r--arch/arm/mach-ixp4xx/common-pci.c451
-rw-r--r--arch/arm/mach-ixp4xx/common.c448
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-pci.c61
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-setup.c113
-rw-r--r--arch/arm/mach-ixp4xx/goramo_mlr.c532
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/hardware.h32
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/io.h545
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h303
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/platform.h102
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/udc.h8
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/uncompress.h4
-rw-r--r--arch/arm/mach-ixp4xx/irqs.h64
-rw-r--r--arch/arm/mach-mmp/sram.c22
-rw-r--r--arch/arm/mach-mstar/Kconfig1
-rw-r--r--arch/arm/mach-mv78xx0/irq.c3
-rw-r--r--arch/arm/mach-nspire/Kconfig1
-rw-r--r--arch/arm/mach-orion5x/Kconfig2
-rw-r--r--arch/arm/mach-orion5x/irq.c2
-rw-r--r--arch/arm/mach-pxa/Kconfig10
-rw-r--r--arch/arm/mach-pxa/Makefile2
-rw-r--r--arch/arm/mach-pxa/include/mach/uncompress.h5
-rw-r--r--arch/arm/mach-pxa/stargate2.c1046
-rw-r--r--arch/arm/mach-shmobile/Kconfig2
-rw-r--r--arch/arm/mach-ux500/Kconfig2
-rw-r--r--arch/arm/plat-orion/gpio.c8
-rw-r--r--arch/arm/plat-orion/include/plat/orion-gpio.h3
-rw-r--r--drivers/crypto/ixp4xx_crypto.c1
-rw-r--r--drivers/net/ethernet/xscale/Kconfig4
-rw-r--r--drivers/net/ethernet/xscale/ixp4xx_eth.c85
-rw-r--r--drivers/net/ethernet/xscale/ptp_ixp46x.c1
-rw-r--r--drivers/net/wan/Kconfig3
-rw-r--r--drivers/net/wan/ixp4xx_hss.c39
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/pcmcia/Makefile1
-rw-r--r--drivers/pcmcia/pxa2xx_stargate2.c137
-rw-r--r--drivers/soc/Kconfig1
-rw-r--r--drivers/soc/Makefile1
-rw-r--r--drivers/soc/ixp4xx/Kconfig1
-rw-r--r--drivers/soc/ixp4xx/ixp4xx-npe.c33
-rw-r--r--drivers/soc/microchip/Kconfig10
-rw-r--r--drivers/soc/microchip/Makefile1
-rw-r--r--drivers/soc/microchip/mpfs-sys-controller.c193
-rw-r--r--include/linux/clk/at91_pmc.h4
-rw-r--r--include/linux/platform_data/eth_ixp4xx.h21
-rw-r--r--include/linux/platform_data/wan_ixp4xx_hss.h17
-rw-r--r--include/linux/soc/ixp4xx/cpu.h26
-rw-r--r--include/linux/soc/ixp4xx/npe.h2
-rw-r--r--include/soc/at91/sama7-ddr.h15
-rw-r--r--include/soc/microchip/mpfs.h4
-rw-r--r--kernel/dma/mapping.c2
-rw-r--r--sound/soc/pxa/Kconfig9
-rw-r--r--sound/soc/pxa/Makefile2
-rw-r--r--sound/soc/pxa/imote2.c99
72 files changed, 435 insertions, 4355 deletions
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index e72b6a3fae99..ea9c233052f3 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -17,13 +17,6 @@ description: |
child nodes, each representing a serial sub-node device. The mode setting
selects which particular function will be used.
- Refer to next bindings documentation for information on protocol subnodes that
- can exist under USI node:
-
- [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
- [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
- [3] Documentation/devicetree/bindings/spi/samsung,spi.yaml
-
properties:
$nodename:
pattern: "^usi@[0-9a-f]+$"
@@ -71,10 +64,17 @@ properties:
This property is optional.
patternProperties:
- # All other properties should be child nodes
- "^(serial|spi|i2c)@[0-9a-f]+$":
+ "^i2c@[0-9a-f]+$":
+ $ref: /schemas/i2c/i2c-exynos5.yaml
+ description: Child node describing underlying I2C
+
+ "^serial@[0-9a-f]+$":
+ $ref: /schemas/serial/samsung_uart.yaml
+ description: Child node describing underlying UART/serial
+
+ "^spi@[0-9a-f]+$":
type: object
- description: Child node describing underlying USI serial protocol
+ description: Child node describing underlying SPI
required:
- compatible
diff --git a/MAINTAINERS b/MAINTAINERS
index 24b0b99382a8..db425a745b9b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2117,13 +2117,6 @@ F: Documentation/devicetree/bindings/arm/intel,keembay.yaml
F: arch/arm64/boot/dts/intel/keembay-evm.dts
F: arch/arm64/boot/dts/intel/keembay-soc.dtsi
-ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
-M: Jonathan Cameron <jic23@cam.ac.uk>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-pxa/stargate2.c
-F: drivers/pcmcia/pxa2xx_stargate2.c
-
ARM/INTEL XSC3 (MANZANO) ARM CORE
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c0d14b192b27..2366a7ffbd9f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -233,9 +233,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ARCH_SUPPORTS_UPROBES
def_bool y
-config ARCH_HAS_DMA_SET_COHERENT_MASK
- bool
-
config GENERIC_ISA_DMA
bool
@@ -279,7 +276,7 @@ config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
- default 0x00000000 if ARCH_FOOTBRIDGE || ARCH_IXP4XX
+ default 0x00000000 if ARCH_FOOTBRIDGE
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x30000000 if ARCH_S3C24XX
default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
@@ -307,6 +304,17 @@ config MMU
Select if you want MMU-based virtualised addressing space
support by paged memory management. If unsure, say 'Y'.
+config ARM_SINGLE_ARMV7M
+ def_bool !MMU
+ select ARM_NVIC
+ select AUTO_ZRELADDR
+ select TIMER_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select NO_IOPORT_MAP
+ select SPARSE_IRQ
+ select USE_OF
+
config ARCH_MMAP_RND_BITS_MIN
default 8
@@ -321,12 +329,11 @@ config ARCH_MMAP_RND_BITS_MAX
#
choice
prompt "ARM system type"
- default ARM_SINGLE_ARMV7M if !MMU
- default ARCH_MULTIPLATFORM if MMU
+ depends on MMU
+ default ARCH_MULTIPLATFORM
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
- depends on MMU
select ARCH_FLATMEM_ENABLE
select ARCH_SPARSEMEM_ENABLE
select ARCH_SELECT_MEMORY_MODEL
@@ -340,18 +347,6 @@ config ARCH_MULTIPLATFORM
select SPARSE_IRQ
select USE_OF
-config ARM_SINGLE_ARMV7M
- bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
- depends on !MMU
- select ARM_NVIC
- select AUTO_ZRELADDR
- select TIMER_OF
- select COMMON_CLK
- select CPU_V7M
- select NO_IOPORT_MAP
- select SPARSE_IRQ
- select USE_OF
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_SPARSEMEM_ENABLE
@@ -370,7 +365,6 @@ config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
@@ -378,7 +372,6 @@ config ARCH_FOOTBRIDGE
config ARCH_IOP32X
bool "IOP32x-based"
- depends on MMU
select CPU_XSCALE
select GPIO_IOP
select GPIOLIB
@@ -390,18 +383,15 @@ config ARCH_IOP32X
config ARCH_IXP4XX
bool "IXP4xx-based"
- depends on MMU
- select ARCH_HAS_DMA_SET_COHERENT_MASK
select ARCH_SUPPORTS_BIG_ENDIAN
+ select ARM_PATCH_PHYS_VIRT
select CPU_XSCALE
- select DMABOUNCE if PCI
select GPIO_IXP4XX
select GPIOLIB
select HAVE_PCI
select IXP4XX_IRQ
select IXP4XX_TIMER
- # With the new PCI driver this is not needed
- select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
+ select SPARSE_IRQ
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
help
@@ -423,7 +413,6 @@ config ARCH_DOVE
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
- depends on MMU
select ARCH_MTD_XIP
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
@@ -442,7 +431,6 @@ config ARCH_PXA
config ARCH_RPC
bool "RiscPC"
- depends on MMU
depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
@@ -497,7 +485,6 @@ config ARCH_S3C24XX
config ARCH_OMAP1
bool "TI OMAP1"
- depends on MMU
select ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index dedaaae3d0d8..29b1f192afbb 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -41,8 +41,6 @@ CONFIG_MACH_EXEDA=y
CONFIG_MACH_CM_X300=y
CONFIG_MACH_CAPC7117=y
CONFIG_ARCH_GUMSTIX=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_MACH_STARGATE2=y
CONFIG_MACH_XCEP=y
CONFIG_TRIZEPS_PXA=y
CONFIG_MACH_TRIZEPS4WL=y
@@ -487,7 +485,6 @@ CONFIG_SND_SOC_ZYLONITE=m
CONFIG_SND_PXA2XX_SOC_HX4700=m
CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
CONFIG_SND_PXA2XX_SOC_MIOA701=m
-CONFIG_SND_PXA2XX_SOC_IMOTE2=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SIMPLE_CARD=m
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 02f6b108fd5d..279810381256 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -63,6 +63,7 @@ config SOC_SAMA7G5
select HAVE_AT91_GENERATED_CLK
select HAVE_AT91_SAM9X60_PLL
select HAVE_AT91_UTMI
+ select PM_OPP
select SOC_SAMA7
help
Select this if you are using one of Microchip's SAMA7G5 family SoC.
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index dd6f4ce3f766..0fd609e26615 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -605,6 +605,30 @@ static void at91sam9_sdram_standby(void)
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
+static void sama7g5_standby(void)
+{
+ int pwrtmg, ratio;
+
+ pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+ ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO);
+
+ /*
+ * Place RAM into self-refresh after a maximum idle clocks. The maximum
+ * idle clocks is configured by bootloader in
+ * UDDRC_PWRMGT.SELFREF_TO_X32.
+ */
+ writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN,
+ soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+ /* Divide CPU clock by 16. */
+ writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO);
+
+ cpu_do_idle();
+
+ /* Restore previous configuration. */
+ writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO);
+ writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+}
+
struct ramc_info {
void (*idle)(void);
unsigned int memctrl;
@@ -615,6 +639,7 @@ static const struct ramc_info ramc_infos[] __initconst = {
{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+ { .idle = sama7g5_standby, },
};
static const struct of_device_id ramc_ids[] __initconst = {
@@ -622,7 +647,7 @@ static const struct of_device_id ramc_ids[] __initconst = {
{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
- { .compatible = "microchip,sama7g5-uddrc", },
+ { .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], },
{ /*sentinel*/ }
};
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index fdb4f63ecde4..abe4ced33eda 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -159,7 +159,7 @@ sr_ena_1:
/* Switch to self-refresh. */
ldr tmp1, [r2, #UDDRC_PWRCTL]
- orr tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+ orr tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
str tmp1, [r2, #UDDRC_PWRCTL]
sr_ena_2:
@@ -276,7 +276,7 @@ sr_dis_5:
/* Trigger self-refresh exit. */
ldr tmp1, [r2, #UDDRC_PWRCTL]
- bic tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+ bic tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
str tmp1, [r2, #UDDRC_PWRCTL]
sr_dis_6:
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index bd3f82788ebc..8db655c3e321 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -185,7 +185,6 @@ config ARCH_BCM_53573
config ARCH_BCM_63XX
bool "Broadcom BCM63xx DSL SoC"
depends on ARCH_MULTI_V7
- depends on MMU
select ARCH_HAS_RESET_CONTROLLER
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 31ccbcee2627..d36f6b8269c2 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -73,12 +73,12 @@ void __init dove_init_irq(void)
/*
* Initialize gpiolib for GPIOs 0-71.
*/
- orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
+ orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
+ orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
- orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
+ orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
}
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2eaf2dbb8e81..2da5b60b59e2 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -60,8 +60,10 @@ static int exynos_cpu_boot(int cpu)
/*
* Exynos3250 doesn't need to send smc command for secondary CPU boot
* because Exynos3250 removes WFE in secure mode.
+ *
+ * On Exynos5 devices the call is ignored by trustzone firmware.
*/
- if (soc_is_exynos3250())
+ if (!soc_is_exynos4210() && !soc_is_exynos4412())
return 0;
/*
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index ecaf6e7388d9..985ad3a95671 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -21,32 +21,26 @@
* 0xf0000000 0x80000000 16MB ISA memory
*/
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b) (a)
-#else
-#define MMU_IO(a, b) (b)
-#endif
-
#define XBUS_SIZE 0x00100000
-#define XBUS_BASE MMU_IO(0xff800000, 0x40000000)
+#define XBUS_BASE 0xff800000
#define ARMCSR_SIZE 0x00100000
-#define ARMCSR_BASE MMU_IO(0xfe000000, 0x42000000)
+#define ARMCSR_BASE 0xfe000000
#define WFLUSH_SIZE 0x00100000
-#define WFLUSH_BASE MMU_IO(0xfd000000, 0x78000000)
+#define WFLUSH_BASE 0xfd000000
#define PCIIACK_SIZE 0x00100000
-#define PCIIACK_BASE MMU_IO(0xfc000000, 0x79000000)
+#define PCIIACK_BASE 0xfc000000
#define PCICFG1_SIZE 0x01000000
-#define PCICFG1_BASE MMU_IO(0xfb000000, 0x7a000000)
+#define PCICFG1_BASE 0xfb000000
#define PCICFG0_SIZE 0x01000000
-#define PCICFG0_BASE MMU_IO(0xfa000000, 0x7b000000)
+#define PCICFG0_BASE 0xfa000000
#define PCIMEM_SIZE 0x01000000
-#define PCIMEM_BASE MMU_IO(0xf0000000, 0x80000000)
+#define PCIMEM_BASE 0xf0000000
#define XBUS_CS2 0x40012000
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
deleted file mode 100644
index 4e18b921373f..000000000000
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-footbridge/include/mach/io.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * Modifications:
- * 06-12-1997 RMK Created.
- * 07-04-1999 RMK Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * Translation of various i/o addresses to host addresses for !CONFIG_MMU
- */
-#define PCIO_BASE 0x7c000000
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
-
-#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f296bac467c8..c5a59158722b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -227,6 +227,13 @@ config SOC_IMX7ULP
help
This enables support for Freescale i.MX7 Ultra Low Power processor.
+config SOC_IMXRT
+ bool "i.MXRT support"
+ depends on ARM_SINGLE_ARMV7M
+ select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+ help
+ This enables support for Freescale i.MXRT Crossover processor.
+
config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d5291ed9186a..6fb3965b9ae6 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -63,6 +63,8 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
+obj-$(CONFIG_SOC_IMXRT) += mach-imxrt.o
+
obj-$(CONFIG_SOC_VF610) += mach-vf610.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
diff --git a/arch/arm/mach-imx/mach-imxrt.c b/arch/arm/mach-imx/mach-imxrt.c
new file mode 100644
index 000000000000..2063a3059c84
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imxrt.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+#include <asm/v7m.h>
+
+static const char *const imxrt_compat[] __initconst = {
+ "fsl,imxrt1050",
+ NULL
+};
+
+DT_MACHINE_START(IMXRTDT, "IMXRT (Device Tree Support)")
+ .dt_compat = imxrt_compat,
+ .restart = armv7m_restart,
+MACHINE_END
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 63a0ca82659a..d61ea616cf8e 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -42,24 +42,12 @@ config INTEGRATOR_IMPD1
allows ARM(R) Ltd PrimeCells to be developed and evaluated.
The IM-PD1 can be found on the Integrator/PP2 platform.
-config INTEGRATOR_CM7TDMI
- bool "Integrator/CM7TDMI core module"
- depends on ARCH_INTEGRATOR_AP
- depends on ARCH_MULTI_V4 && !MMU
- select CPU_ARM7TDMI
-
config INTEGRATOR_CM720T
bool "Integrator/CM720T core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V4T
select CPU_ARM720T
-config INTEGRATOR_CM740T
- bool "Integrator/CM740T core module"
- depends on ARCH_INTEGRATOR_AP
- depends on ARCH_MULTI_V4T && !MMU
- select CPU_ARM740T
-
config INTEGRATOR_CM920T
bool "Integrator/CM920T core module"
depends on ARCH_INTEGRATOR_AP
@@ -78,23 +66,6 @@ config INTEGRATOR_CM926EJS
depends on ARCH_MULTI_V5
select CPU_ARM926T
-config INTEGRATOR_CM940T
- bool "Integrator/CM940T core module"
- depends on ARCH_INTEGRATOR_AP
- depends on ARCH_MULTI_V4T && !MMU
- select CPU_ARM940T
-
-config INTEGRATOR_CM946ES
- bool "Integrator/CM946E-S core module"
- depends on ARCH_INTEGRATOR_AP
- depends on ARCH_MULTI_V5 && !MMU
- select CPU_ARM946E
-
-config INTEGRATOR_CM966ES
- bool "Integrator/CM966E-S core module"
- depends on ARCH_INTEGRATOR_AP
- depends on BROKEN # no kernel support
-
config INTEGRATOR_CM10200E_REV0
bool "Integrator/CM10200E rev.0 core module"
depends on ARCH_INTEGRATOR_AP && n
@@ -127,7 +98,7 @@ config INTEGRATOR_CM1136JFS
config ARCH_INTEGRATOR_CP
bool "Support Integrator/CP platform"
- depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+ depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
select ARM_TIMER_SP804
select SERIAL_AMBA_PL011 if TTY
select SERIAL_AMBA_PL011_CONSOLE if TTY
@@ -135,12 +106,6 @@ config ARCH_INTEGRATOR_CP
help
Include support for the ARM(R) Integrator CP platform.
-config INTEGRATOR_CT7T
- bool "Integrator/CT7TD (ARM7TDMI) core tile"
- depends on ARCH_INTEGRATOR_CP
- depends on ARCH_MULTI_V4T && !MMU
- select CPU_ARM7TDMI
-
config INTEGRATOR_CT926
bool "Integrator/CT926 (ARM926EJ-S) core tile"
depends on ARCH_INTEGRATOR_CP
diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-integrator/hardware.h
index 4d6ade3dd4ee..81ce09e3ad45 100644
--- a/arch/arm/mach-integrator/hardware.h
+++ b/arch/arm/mach-integrator/hardware.h
@@ -16,12 +16,7 @@
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
-#else
-#define IO_ADDRESS(x) (x)
-#endif
-
#define __io_address(n) ((void __iomem *)IO_ADDRESS(n))
/*
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 4c787b4be62b..f41ba3f42fc8 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,63 +17,6 @@ config MACH_IXP4XX_OF
help
Say 'Y' here to support Device Tree-based IXP4xx platforms.
-config MACH_GATEWAY7001
- bool "Gateway 7001"
- depends on IXP4XX_PCI_LEGACY
- help
- Say 'Y' here if you want your kernel to support Gateway's
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-config MACH_GORAMO_MLR
- bool "GORAMO Multi Link Router"
- depends on IXP4XX_PCI_LEGACY
- help
- Say 'Y' here if you want your kernel to support GORAMO
- MultiLink router.
-
-config ARCH_PRPMC1100
- bool "PrPMC1100"
- help
- Say 'Y' here if you want your kernel to support the Motorola
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-comment "IXP4xx Options"
-
-config IXP4XX_PCI_LEGACY
- bool "IXP4xx legacy PCI driver support"
- depends on PCI
- help
- Selects legacy PCI driver.
- Not recommended for new development.
-
-config IXP4XX_INDIRECT_PCI
- bool "Use indirect PCI memory access"
- depends on IXP4XX_PCI_LEGACY
- help
- IXP4xx provides two methods of accessing PCI memory space:
-
- 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- To access PCI via this space, we simply ioremap() the BAR
- into the kernel and we can use the standard read[bwl]/write[bwl]
- macros. This is the preferred method due to speed but it
- limits the system to just 64MB of PCI memory. This can be
- problematic if using video cards and other memory-heavy devices.
-
- 2) If > 64MB of memory space is required, the IXP4xx can be
- configured to use indirect registers to access the whole PCI
- memory space. This currently allows for up to 1 GB (0x10000000
- to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
- is that every PCI access requires three local register accesses
- plus a spinlock, but in some cases the performance hit is
- acceptable. In addition, you cannot mmap() PCI devices in this
- case due to the indirect nature of the PCI window.
-
- By default, the direct method is used. Choose this option if you
- need to use the indirect method instead. If you don't know
- what you need, leave this option unselected.
-
endmenu
endif
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index b241094c9649..3d1c9d854c7f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -1,19 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-pci-y :=
-obj-pci-n :=
-
-# Device tree platform
-obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o
-
-obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-
-obj-y += common.o
-
-obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
-
-obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+obj-y += ixp4xx-of.o
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
deleted file mode 100644
index 893c19c254e3..000000000000
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/common-pci.c
- *
- * IXP4XX PCI routines for all platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/dma-mapping.h>
-
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-
-/*
- * IXP4xx PCI read function is dependent on whether we are
- * running A0 or B0 (AppleGate) silicon.
- */
-int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-
-/*
- * Base address for PCI register region
- */
-unsigned long ixp4xx_pci_reg_base = 0;
-
-/*
- * PCI cfg an I/O routines are done by programming a
- * command/byte enable register, and then read/writing
- * the data from a data register. We need to ensure
- * these transactions are atomic or we will end up
- * with corrupt data on the bus or in a driver.
- */
-static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock);
-
-/*
- * Read from PCI config space
- */
-static void crp_read(u32 ad_cbe, u32 *data)
-{
- unsigned long flags;
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
- *PCI_CRP_AD_CBE = ad_cbe;
- *data = *PCI_CRP_RDATA;
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-/*
- * Write to PCI config space
- */
-static void crp_write(u32 ad_cbe, u32 data)
-{
- unsigned long flags;
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
- *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe;
- *PCI_CRP_WDATA = data;
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-static inline int check_master_abort(void)
-{
- /* check Master Abort bit after access */
- unsigned long isr = *PCI_ISR;
-
- if (isr & PCI_ISR_PFE) {
- /* make sure the Master Abort bit is reset */
- *PCI_ISR = PCI_ISR_PFE;
- pr_debug("%s failed\n", __func__);
- return 1;
- }
-
- return 0;
-}
-
-int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data)
-{
- unsigned long flags;
- int retval = 0;
- int i;
-
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
- *PCI_NP_AD = addr;
-
- /*
- * PCI workaround - only works if NP PCI space reads have
- * no side effects!!! Read 8 times. last one will be good.
- */
- for (i = 0; i < 8; i++) {
- *PCI_NP_CBE = cmd;
- *data = *PCI_NP_RDATA;
- *data = *PCI_NP_RDATA;
- }
-
- if(check_master_abort())
- retval = 1;
-
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
- return retval;
-}
-
-int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data)
-{
- unsigned long flags;
- int retval = 0;
-
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
- *PCI_NP_AD = addr;
-
- /* set up and execute the read */
- *PCI_NP_CBE = cmd;
-
- /* the result of the read is now in NP_RDATA */
- *data = *PCI_NP_RDATA;
-
- if(check_master_abort())
- retval = 1;
-
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
- return retval;
-}
-
-int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data)
-{
- unsigned long flags;
- int retval = 0;
-
- raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
- *PCI_NP_AD = addr;
-
- /* set up the write */
- *PCI_NP_CBE = cmd;
-
- /* execute the write by writing to NP_WDATA */
- *PCI_NP_WDATA = data;
-
- if(check_master_abort())
- retval = 1;
-
- raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
- return retval;
-}
-
-static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
-{
- u32 addr;
- if (!bus_num) {
- /* type 0 */
- addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) |
- (where & ~3);
- } else {
- /* type 1 */
- addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) |
- ((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
- }
- return addr;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
- /*0*/ 0,
- /*1*/ 0xff,
- /*2*/ 0xffff,
- /*3*/ 0,
- /*4*/ 0xffffffff,
-};
-
-static u32 local_byte_lane_enable_bits(u32 n, int size)
-{
- if (size == 1)
- return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
- if (size == 2)
- return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
- if (size == 4)
- return 0;
- return 0xffffffff;
-}
-
-static int local_read_config(int where, int size, u32 *value)
-{
- u32 n, data;
- pr_debug("local_read_config from %d size %d\n", where, size);
- n = where % 4;
- crp_read(where & ~3, &data);
- *value = (data >> (8*n)) & bytemask[size];
- pr_debug("local_read_config read %#x\n", *value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int local_write_config(int where, int size, u32 value)
-{
- u32 n, byte_enables, data;
- pr_debug("local_write_config %#x to %d size %d\n", value, where, size);
- n = where % 4;
- byte_enables = local_byte_lane_enable_bits(n, size);
- if (byte_enables == 0xffffffff)
- return PCIBIOS_BAD_REGISTER_NUMBER;
- data = value << (8*n);
- crp_write((where & ~3) | byte_enables, data);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static u32 byte_lane_enable_bits(u32 n, int size)
-{
- if (size == 1)
- return (0xf & ~BIT(n)) << 4;
- if (size == 2)
- return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
- if (size == 4)
- return 0;
- return 0xffffffff;
-}
-
-static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
- u32 n, byte_enables, addr, data;
- u8 bus_num = bus->number;
-
- pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size,
- bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
- *value = 0xffffffff;
- n = where % 4;
- byte_enables = byte_lane_enable_bits(n, size);
- if (byte_enables == 0xffffffff)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- addr = ixp4xx_config_addr(bus_num, devfn, where);
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = (data >> (8*n)) & bytemask[size];
- pr_debug("read_config_byte read %#x\n", *value);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int ixp4xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
- u32 n, byte_enables, addr, data;
- u8 bus_num = bus->number;
-
- pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where,
- size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
- n = where % 4;
- byte_enables = byte_lane_enable_bits(n, size);
- if (byte_enables == 0xffffffff)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- addr = ixp4xx_config_addr(bus_num, devfn, where);
- data = value << (8*n);
- if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp4xx_ops = {
- .read = ixp4xx_pci_read_config,
- .write = ixp4xx_pci_write_config,
-};
-
-/*
- * PCI abort handler
- */
-static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- u32 isr, status;
-
- isr = *PCI_ISR;
- local_read_config(PCI_STATUS, 2, &status);
- pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, "
- "status = %#x\n", addr, isr, status);
-
- /* make sure the Master Abort bit is reset */
- *PCI_ISR = PCI_ISR_PFE;
- status |= PCI_STATUS_REC_MASTER_ABORT;
- local_write_config(PCI_STATUS, 2, status);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-void __init ixp4xx_pci_preinit(void)
-{
- unsigned long cpuid = read_cpuid_id();
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
- pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */
-#else
- pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */
-#endif
- /*
- * Determine which PCI read method to use.
- * Rev 0 IXP425 requires workaround.
- */
- if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
- printk("PCI: IXP42x A0 silicon detected - "
- "PCI Non-Prefetch Workaround Enabled\n");
- ixp4xx_pci_read = ixp4xx_pci_read_errata;
- } else
- ixp4xx_pci_read = ixp4xx_pci_read_no_errata;
-
-
- /* hook in our fault handler for PCI errors */
- hook_fault_code(16+6, abort_handler, SIGBUS, 0,
- "imprecise external abort");
-
- pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
-
- /*
- * We use identity AHB->PCI address translation
- * in the 0x48000000 to 0x4bffffff address space
- */
- *PCI_PCIMEMBASE = 0x48494A4B;
-
- /*
- * We also use identity PCI->AHB address translation
- * in 4 16MB BARs that begin at the physical memory start
- */
- *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
- ((PHYS_OFFSET & 0xFF000000) >> 8) +
- ((PHYS_OFFSET & 0xFF000000) >> 16) +
- ((PHYS_OFFSET & 0xFF000000) >> 24) +
- 0x00010203;
-
- if (*PCI_CSR & PCI_CSR_HOST) {
- printk("PCI: IXP4xx is host\n");
-
- pr_debug("setup BARs in controller\n");
-
- /*
- * We configure the PCI inbound memory windows to be
- * 1:1 mapped to SDRAM
- */
- local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
- local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
- local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
- local_write_config(PCI_BASE_ADDRESS_3, 4,
- PHYS_OFFSET + SZ_32M + SZ_16M);
-
- /*
- * Enable CSR window at 64 MiB to allow PCI masters
- * to continue prefetching past 64 MiB boundary.
- */
- local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
-
- /*
- * Enable the IO window to be way up high, at 0xfffffc00
- */
- local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
- local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
- } else {
- printk("PCI: IXP4xx is target - No bus scan performed\n");
- }
-
- printk("PCI: IXP4xx Using %s access for memory space\n",
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- "direct"
-#else
- "indirect"
-#endif
- );
-
- pr_debug("clear error bits in ISR\n");
- *PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE;
-
- /*
- * Set Initialize Complete in PCI Control Register: allow IXP4XX to
- * respond to PCI configuration cycles. Specify that the AHB bus is
- * operating in big endian mode. Set up byte lane swapping between
- * little-endian PCI and the big-endian AHB bus
- */
-#ifdef __ARMEB__
- *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
-#else
- *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
-#endif
-
- pr_debug("DONE\n");
-}
-
-int ixp4xx_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
-
- if (nr >= 1)
- return 0;
-
- res = kcalloc(2, sizeof(*res), GFP_KERNEL);
- if (res == NULL) {
- /*
- * If we're out of memory this early, something is wrong,
- * so we might as well catch it here.
- */
- panic("PCI: unable to allocate resources?\n");
- }
-
- local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
- res[0].name = "PCI I/O Space";
- res[0].start = 0x00000000;
- res[0].end = 0x0000ffff;
- res[0].flags = IORESOURCE_IO;
-
- res[1].name = "PCI Memory Space";
- res[1].start = PCIBIOS_MIN_MEM;
- res[1].end = PCIBIOS_MAX_MEM;
- res[1].flags = IORESOURCE_MEM;
-
- request_resource(&ioport_resource, &res[0]);
- request_resource(&iomem_resource, &res[1]);
-
- pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
- pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
- return 1;
-}
-
-EXPORT_SYMBOL(ixp4xx_pci_read);
-EXPORT_SYMBOL(ixp4xx_pci_write);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
deleted file mode 100644
index cdc720f54daa..000000000000
--- a/arch/arm/mach-ixp4xx/common.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/common.c
- *
- * Generic code shared across all IXP4XX platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 (c) Intel Corporation
- * Copyright 2003-2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/cpu.h>
-#include <linux/pci.h>
-#include <linux/sched_clock.h>
-#include <linux/soc/ixp4xx/cpu.h>
-#include <linux/irqchip/irq-ixp4xx.h>
-#include <linux/platform_data/timer-ixp4xx.h>
-#include <linux/dma-map-ops.h>
-#include <mach/udc.h>
-#include <mach/hardware.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/exception.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "irqs.h"
-
-u32 ixp4xx_read_feature_bits(void)
-{
- u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
-
- if (cpu_is_ixp42x_rev_a0())
- return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
- IXP4XX_FEATURE_AES);
- if (cpu_is_ixp42x())
- return val & IXP42X_FEATURE_MASK;
- if (cpu_is_ixp43x())
- return val & IXP43X_FEATURE_MASK;
- return val & IXP46X_FEATURE_MASK;
-}
-EXPORT_SYMBOL(ixp4xx_read_feature_bits);
-
-void ixp4xx_write_feature_bits(u32 value)
-{
- __raw_writel(~value, IXP4XX_EXP_CFG2);
-}
-EXPORT_SYMBOL(ixp4xx_write_feature_bits);
-
-#define IXP4XX_TIMER_FREQ 66666000
-
-/*************************************************************************
- * IXP4xx chipset I/O mapping
- *************************************************************************/
-static struct map_desc ixp4xx_io_desc[] __initdata = {
- { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
- .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
- .length = IXP4XX_PERIPHERAL_REGION_SIZE,
- .type = MT_DEVICE
- }, { /* Expansion Bus Config Registers */
- .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
- .length = IXP4XX_EXP_CFG_REGION_SIZE,
- .type = MT_DEVICE
- }, { /* PCI Registers */
- .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
- .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
- .length = IXP4XX_PCI_CFG_REGION_SIZE,
- .type = MT_DEVICE
- },
-};
-
-void __init ixp4xx_map_io(void)
-{
- iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
-}
-
-void __init ixp4xx_init_irq(void)
-{
- /*
- * ixp4xx does not implement the XScale PWRMODE register
- * so it must not call cpu_do_idle().
- */
- cpu_idle_poll_ctrl(true);
-
- ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
- (cpu_is_ixp46x() || cpu_is_ixp43x()));
-}
-
-void __init ixp4xx_timer_init(void)
-{
- return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
- IRQ_IXP4XX_TIMER1,
- IXP4XX_TIMER_FREQ);
-}
-
-static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
-
-void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
- memcpy(&ixp4xx_udc_info, info, sizeof *info);
-}
-
-static struct resource ixp4xx_udc_resources[] = {
- [0] = {
- .start = 0xc800b000,
- .end = 0xc800bfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IXP4XX_USB,
- .end = IRQ_IXP4XX_USB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource ixp4xx_gpio_resource[] = {
- {
- .start = IXP4XX_GPIO_BASE_PHYS,
- .end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ixp4xx_gpio_device = {
- .name = "ixp4xx-gpio",
- .id = -1,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ixp4xx_gpio_resource,
- .num_resources = ARRAY_SIZE(ixp4xx_gpio_resource),
-};
-
-/*
- * USB device controller. The IXP4xx uses the same controller as PXA25X,
- * so we just use the same device.
- */
-static struct platform_device ixp4xx_udc_device = {
- .name = "pxa25x-udc",
- .id = -1,
- .num_resources = 2,
- .resource = ixp4xx_udc_resources,
- .dev = {
- .platform_data = &ixp4xx_udc_info,
- },
-};
-
-static struct resource ixp4xx_npe_resources[] = {
- {
- .start = IXP4XX_NPEA_BASE_PHYS,
- .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IXP4XX_NPEB_BASE_PHYS,
- .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IXP4XX_NPEC_BASE_PHYS,
- .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-
-};
-
-static struct platform_device ixp4xx_npe_device = {
- .name = "ixp4xx-npe",
- .id = -1,
- .num_resources = ARRAY_SIZE(ixp4xx_npe_resources),
- .resource = ixp4xx_npe_resources,
-};
-
-static struct resource ixp4xx_qmgr_resources[] = {
- {
- .start = IXP4XX_QMGR_BASE_PHYS,
- .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_IXP4XX_QM1,
- .end = IRQ_IXP4XX_QM1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_IXP4XX_QM2,
- .end = IRQ_IXP4XX_QM2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ixp4xx_qmgr_device = {
- .name = "ixp4xx-qmgr",
- .id = -1,
- .num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources),
- .resource = ixp4xx_qmgr_resources,
-};
-
-static struct platform_device *ixp4xx_devices[] __initdata = {
- &ixp4xx_npe_device,
- &ixp4xx_qmgr_device,
- &ixp4xx_gpio_device,
- &ixp4xx_udc_device,
-};
-
-static struct resource ixp46x_i2c_resources[] = {
- [0] = {
- .start = 0xc8011000,
- .end = 0xc801101c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IXP4XX_I2C,
- .end = IRQ_IXP4XX_I2C,
- .flags = IORESOURCE_IRQ
- }
-};
-
-/* A single 32-bit register on IXP46x */
-#define IXP4XX_HWRANDOM_BASE_PHYS 0x70002100
-
-static struct resource ixp46x_hwrandom_resource[] = {
- {
- .start = IXP4XX_HWRANDOM_BASE_PHYS,
- .end = IXP4XX_HWRANDOM_BASE_PHYS + 0x3,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ixp46x_hwrandom_device = {
- .name = "ixp4xx-hwrandom",
- .id = -1,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ixp46x_hwrandom_resource,
- .num_resources = ARRAY_SIZE(ixp46x_hwrandom_resource),
-};
-
-/*
- * I2C controller. The IXP46x uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-static struct platform_device ixp46x_i2c_controller = {
- .name = "IOP3xx-I2C",
- .id = 0,
- .num_resources = 2,
- .resource = ixp46x_i2c_resources
-};
-
-static struct resource ixp46x_ptp_resources[] = {
- DEFINE_RES_MEM(IXP4XX_TIMESYNC_BASE_PHYS, SZ_4K),
- DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO8, "master"),
- DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO7, "slave"),
-};
-
-static struct platform_device ixp46x_ptp = {
- .name = "ptp-ixp46x",
- .id = -1,
- .resource = ixp46x_ptp_resources,
- .num_resources = ARRAY_SIZE(ixp46x_ptp_resources),
-};
-
-static struct platform_device *ixp46x_devices[] __initdata = {
- &ixp46x_hwrandom_device,
- &ixp46x_i2c_controller,
- &ixp46x_ptp,
-};
-
-unsigned long ixp4xx_exp_bus_size;
-EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-static struct platform_device_info ixp_dev_info __initdata = {
- .name = "ixp4xx_crypto",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-static int __init ixp_crypto_register(void)
-{
- struct platform_device *pdev;
-
- if (!(~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
- IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
- printk(KERN_ERR "ixp_crypto: No HW crypto available\n");
- return -ENODEV;
- }
-
- pdev = platform_device_register_full(&ixp_dev_info);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- return 0;
-}
-
-void __init ixp4xx_sys_init(void)
-{
- ixp4xx_exp_bus_size = SZ_16M;
-
- platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
- if (IS_ENABLED(CONFIG_CRYPTO_DEV_IXP4XX))
- ixp_crypto_register();
-
- if (cpu_is_ixp46x()) {
- int region;
-
- platform_add_devices(ixp46x_devices,
- ARRAY_SIZE(ixp46x_devices));
-
- for (region = 0; region < 7; region++) {
- if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
- ixp4xx_exp_bus_size = SZ_32M;
- break;
- }
- }
- }
-
- printk("IXP4xx: Using %luMiB expansion bus window size\n",
- ixp4xx_exp_bus_size >> 20);
-}
-
-unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
-EXPORT_SYMBOL(ixp4xx_timer_freq);
-
-void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
-{
- if (mode == REBOOT_SOFT) {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- /* Use on-chip reset capability */
-
- /* set the "key" register to enable access to
- * "timer" and "enable" registers
- */
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
- /* write 0 to the timer register for an immediate reset */
- *IXP4XX_OSWT = 0;
-
- *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
- }
-}
-
-#ifdef CONFIG_PCI
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
- return (dma_addr + size) > SZ_64M;
-}
-
-static int ixp4xx_platform_notify_remove(struct device *dev)
-{
- if (dev_is_pci(dev))
- dmabounce_unregister_dev(dev);
-
- return 0;
-}
-#endif
-
-/*
- * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
- */
-static int ixp4xx_platform_notify(struct device *dev)
-{
- dev->dma_mask = &dev->coherent_dma_mask;
-
-#ifdef CONFIG_PCI
- if (dev_is_pci(dev)) {
- dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
- dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
- return 0;
- }
-#endif
-
- dev->coherent_dma_mask = DMA_BIT_MASK(32);
- return 0;
-}
-
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
- if (dev_is_pci(dev))
- mask &= DMA_BIT_MASK(28); /* 64 MB */
-
- if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
- dev->coherent_dma_mask = mask;
- return 0;
- }
-
- return -EIO; /* device wanted sub-64MB mask */
-}
-EXPORT_SYMBOL(dma_set_coherent_mask);
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
- unsigned int mtype, void *caller)
-{
- if (!is_pci_memory(addr))
- return __arm_ioremap_caller(addr, size, mtype, caller);
-
- return (void __iomem *)addr;
-}
-
-static void ixp4xx_iounmap(volatile void __iomem *addr)
-{
- if (!is_pci_memory((__force u32)addr))
- __iounmap(addr);
-}
-#endif
-
-void __init ixp4xx_init_early(void)
-{
- platform_notify = ixp4xx_platform_notify;
-#ifdef CONFIG_PCI
- platform_notify_remove = ixp4xx_platform_notify_remove;
-#endif
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
- arch_ioremap_caller = ixp4xx_ioremap_caller;
- arch_iounmap = ixp4xx_iounmap;
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
deleted file mode 100644
index 3c3ee9dad6d8..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/gateway7001-pci.c
- *
- * PCI setup routines for Gateway 7001
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- * Copyright (C) 2002 Jungo Software Technologies.
- * Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init gateway7001_pci_preinit(void)
-{
- irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-
- ixp4xx_pci_preinit();
-}
-
-static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- if (slot == 1)
- return IRQ_IXP4XX_GPIO11;
- else if (slot == 2)
- return IRQ_IXP4XX_GPIO10;
- else return -1;
-}
-
-struct hw_pci gateway7001_pci __initdata = {
- .nr_controllers = 1,
- .ops = &ixp4xx_ops,
- .preinit = gateway7001_pci_preinit,
- .setup = ixp4xx_setup,
- .map_irq = gateway7001_map_irq,
-};
-
-int __init gateway7001_pci_init(void)
-{
- if (machine_is_gateway7001())
- pci_common_init(&gateway7001_pci);
- return 0;
-}
-
-subsys_initcall(gateway7001_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
deleted file mode 100644
index 678e7dfff0e5..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/gateway7001-setup.c
- *
- * Board setup for the Gateway 7001 board
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <Kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data gateway7001_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-};
-
-static struct resource gateway7001_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device gateway7001_flash = {
- .name = "IXP4XX-Flash",
- .id = 0,
- .dev = {
- .platform_data = &gateway7001_flash_data,
- },
- .num_resources = 1,
- .resource = &gateway7001_flash_resource,
-};
-
-static struct resource gateway7001_uart_resource = {
- .start = IXP4XX_UART2_BASE_PHYS,
- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port gateway7001_uart_data[] = {
- {
- .mapbase = IXP4XX_UART2_BASE_PHYS,
- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- { },
-};
-
-static struct platform_device gateway7001_uart = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = gateway7001_uart_data,
- },
- .num_resources = 1,
- .resource = &gateway7001_uart_resource,
-};
-
-static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
- &gateway7001_uart
-};
-
-static void __init gateway7001_init(void)
-{
- ixp4xx_sys_init();
-
- gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
- *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-}
-
-#ifdef CONFIG_MACH_GATEWAY7001
-MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
- /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .map_io = ixp4xx_map_io,
- .init_early = ixp4xx_init_early,
- .init_irq = ixp4xx_init_irq,
- .init_time = ixp4xx_timer_init,
- .atag_offset = 0x100,
- .init_machine = gateway7001_init,
-#if defined(CONFIG_PCI)
- .dma_zone_size = SZ_64M,
-#endif
- .restart = ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
deleted file mode 100644
index 07b50dfcc489..000000000000
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Goramo MultiLink router platform code
- * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/hdlc.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_data/wan_ixp4xx_hss.h>
-#include <linux/serial_8250.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/pci.h>
-#include <asm/system_info.h>
-
-#include "irqs.h"
-
-#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
-#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
-#define SLOT_MPCI 0x0D /* IDSEL = AD19 */
-#define SLOT_NEC 0x0E /* IDSEL = AD18 */
-
-/* GPIO lines */
-#define GPIO_SCL 0
-#define GPIO_SDA 1
-#define GPIO_STR 2
-#define GPIO_IRQ_NEC 3
-#define GPIO_IRQ_ETHA 4
-#define GPIO_IRQ_ETHB 5
-#define GPIO_HSS0_DCD_N 6
-#define GPIO_HSS1_DCD_N 7
-#define GPIO_UART0_DCD 8
-#define GPIO_UART1_DCD 9
-#define GPIO_HSS0_CTS_N 10
-#define GPIO_HSS1_CTS_N 11
-#define GPIO_IRQ_MPCI 12
-#define GPIO_HSS1_RTS_N 13
-#define GPIO_HSS0_RTS_N 14
-/* GPIO15 is not connected */
-
-/* Control outputs from 74HC4094 */
-#define CONTROL_HSS0_CLK_INT 0
-#define CONTROL_HSS1_CLK_INT 1
-#define CONTROL_HSS0_DTR_N 2
-#define CONTROL_HSS1_DTR_N 3
-#define CONTROL_EXT 4
-#define CONTROL_AUTO_RESET 5
-#define CONTROL_PCI_RESET_N 6
-#define CONTROL_EEPROM_WC_N 7
-
-/* offsets from start of flash ROM = 0x50000000 */
-#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */
-#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */
-#define CFG_REV 0x4C /* u32 */
-#define CFG_SDRAM_SIZE 0x50 /* u32 */
-#define CFG_SDRAM_CONF 0x54 /* u32 */
-#define CFG_SDRAM_MODE 0x58 /* u32 */
-#define CFG_SDRAM_REFRESH 0x5C /* u32 */
-
-#define CFG_HW_BITS 0x60 /* u32 */
-#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
-#define CFG_HW_HAS_PCI_SLOT 0x00000008
-#define CFG_HW_HAS_ETH0 0x00000010
-#define CFG_HW_HAS_ETH1 0x00000020
-#define CFG_HW_HAS_HSS0 0x00000040
-#define CFG_HW_HAS_HSS1 0x00000080
-#define CFG_HW_HAS_UART0 0x00000100
-#define CFG_HW_HAS_UART1 0x00000200
-#define CFG_HW_HAS_EEPROM 0x00000400
-
-#define FLASH_CMD_READ_ARRAY 0xFF
-#define FLASH_CMD_READ_ID 0x90
-#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */
-
-static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */;
-static u8 control_value;
-
-/*
- * FIXME: this is reimplementing I2C bit-bangining. Move this
- * over to using driver/i2c/busses/i2c-gpio.c like all other boards
- * and register proper I2C device(s) on the bus for this. (See
- * other IXP4xx boards for examples.)
- */
-static void set_scl(u8 value)
-{
- gpio_set_value(GPIO_SCL, !!value);
- udelay(3);
-}
-
-static void set_sda(u8 value)
-{
- gpio_set_value(GPIO_SDA, !!value);
- udelay(3);
-}
-
-static void set_str(u8 value)
-{
- gpio_set_value(GPIO_STR, !!value);
- udelay(3);
-}
-
-static inline void set_control(int line, int value)
-{
- if (value)
- control_value |= (1 << line);
- else
- control_value &= ~(1 << line);
-}
-
-
-static void output_control(void)
-{
- int i;
-
- gpio_direction_output(GPIO_SCL, 1);
- gpio_direction_output(GPIO_SDA, 1);
-
- for (i = 0; i < 8; i++) {
- set_scl(0);
- set_sda(control_value & (0x80 >> i)); /* MSB first */
- set_scl(1); /* active edge */
- }
-
- set_str(1);
- set_str(0);
-
- set_scl(0);
- set_sda(1); /* Be ready for START */
- set_scl(1);
-}
-
-
-static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
-
-static int hss_set_clock(int port, unsigned int clock_type)
-{
- int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
-
- switch (clock_type) {
- case CLOCK_DEFAULT:
- case CLOCK_EXT:
- set_control(ctrl_int, 0);
- output_control();
- return CLOCK_EXT;
-
- case CLOCK_INT:
- set_control(ctrl_int, 1);
- output_control();
- return CLOCK_INT;
-
- default:
- return -EINVAL;
- }
-}
-
-static irqreturn_t hss_dcd_irq(int irq, void *pdev)
-{
- int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
- int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
- set_carrier_cb_tab[port](pdev, !i);
- return IRQ_HANDLED;
-}
-
-
-static int hss_open(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier))
-{
- int i, irq;
-
- if (!port)
- irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
- else
- irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
-
- i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
- set_carrier_cb(pdev, !i);
-
- set_carrier_cb_tab[!!port] = set_carrier_cb;
-
- if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
- printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
- irq, i);
- return i;
- }
-
- set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
- output_control();
- gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
- return 0;
-}
-
-static void hss_close(int port, void *pdev)
-{
- free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
- IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
- set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
-
- set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
- output_control();
- gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
-}
-
-
-/* Flash memory */
-static struct flash_platform_data flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device device_flash = {
- .name = "IXP4XX-Flash",
- .id = 0,
- .dev = { .platform_data = &flash_data },
- .num_resources = 1,
- .resource = &flash_resource,
-};
-
-/* IXP425 2 UART ports */
-static struct resource uart_resources[] = {
- {
- .start = IXP4XX_UART1_BASE_PHYS,
- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IXP4XX_UART2_BASE_PHYS,
- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct plat_serial8250_port uart_data[] = {
- {
- .mapbase = IXP4XX_UART1_BASE_PHYS,
- .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
- REG_OFFSET,
- .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
- .mapbase = IXP4XX_UART2_BASE_PHYS,
- .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
- REG_OFFSET,
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- { },
-};
-
-static struct platform_device device_uarts = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = uart_data,
- .num_resources = 2,
- .resource = uart_resources,
-};
-
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource eth_npeb_resources[] = {
- {
- .start = IXP4XX_EthB_BASE_PHYS,
- .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct resource eth_npec_resources[] = {
- {
- .start = IXP4XX_EthC_BASE_PHYS,
- .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct eth_plat_info eth_plat[] = {
- {
- .phy = 0,
- .rxq = 3,
- .txreadyq = 32,
- }, {
- .phy = 1,
- .rxq = 4,
- .txreadyq = 33,
- }
-};
-
-static struct platform_device device_eth_tab[] = {
- {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = eth_plat,
- .num_resources = ARRAY_SIZE(eth_npeb_resources),
- .resource = eth_npeb_resources,
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = eth_plat + 1,
- .num_resources = ARRAY_SIZE(eth_npec_resources),
- .resource = eth_npec_resources,
- }
-};
-
-
-/* IXP425 2 synchronous serial ports */
-static struct hss_plat_info hss_plat[] = {
- {
- .set_clock = hss_set_clock,
- .open = hss_open,
- .close = hss_close,
- .txreadyq = 34,
- }, {
- .set_clock = hss_set_clock,
- .open = hss_open,
- .close = hss_close,
- .txreadyq = 35,
- }
-};
-
-static struct platform_device device_hss_tab[] = {
- {
- .name = "ixp4xx_hss",
- .id = 0,
- .dev.platform_data = hss_plat,
- }, {
- .name = "ixp4xx_hss",
- .id = 1,
- .dev.platform_data = hss_plat + 1,
- }
-};
-
-
-static struct platform_device *device_tab[7] __initdata = {
- &device_flash, /* index 0 */
-};
-
-static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
- return __raw_readb(flash + addr);
-#else
- return __raw_readb(flash + (addr ^ 3));
-#endif
-}
-
-static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
- return __raw_readw(flash + addr);
-#else
- return __raw_readw(flash + (addr ^ 2));
-#endif
-}
-
-static void __init gmlr_init(void)
-{
- u8 __iomem *flash;
- int i, devices = 1; /* flash */
-
- ixp4xx_sys_init();
-
- if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
- printk(KERN_ERR "goramo-mlr: unable to access system"
- " configuration data\n");
- else {
- system_rev = __raw_readl(flash + CFG_REV);
- hw_bits = __raw_readl(flash + CFG_HW_BITS);
-
- for (i = 0; i < ETH_ALEN; i++) {
- eth_plat[0].hwaddr[i] =
- flash_readb(flash, CFG_ETH0_ADDRESS + i);
- eth_plat[1].hwaddr[i] =
- flash_readb(flash, CFG_ETH1_ADDRESS + i);
- }
-
- __raw_writew(FLASH_CMD_READ_ID, flash);
- system_serial_high = flash_readw(flash, FLASH_SER_OFF);
- system_serial_high <<= 16;
- system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
- system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
- system_serial_low <<= 16;
- system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
- __raw_writew(FLASH_CMD_READ_ARRAY, flash);
-
- iounmap(flash);
- }
-
- switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
- case CFG_HW_HAS_UART0:
- memset(&uart_data[1], 0, sizeof(uart_data[1]));
- device_uarts.num_resources = 1;
- break;
-
- case CFG_HW_HAS_UART1:
- device_uarts.dev.platform_data = &uart_data[1];
- device_uarts.resource = &uart_resources[1];
- device_uarts.num_resources = 1;
- break;
- }
- if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
- device_tab[devices++] = &device_uarts; /* max index 1 */
-
- if (hw_bits & CFG_HW_HAS_ETH0)
- device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
- if (hw_bits & CFG_HW_HAS_ETH1)
- device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
-
- if (hw_bits & CFG_HW_HAS_HSS0)
- device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
- if (hw_bits & CFG_HW_HAS_HSS1)
- device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
-
- hss_plat[0].timer_freq = ixp4xx_timer_freq;
- hss_plat[1].timer_freq = ixp4xx_timer_freq;
-
- gpio_request(GPIO_SCL, "SCL/clock");
- gpio_request(GPIO_SDA, "SDA/data");
- gpio_request(GPIO_STR, "strobe");
- gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
- gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
- gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
- gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
-
- gpio_direction_output(GPIO_SCL, 1);
- gpio_direction_output(GPIO_SDA, 1);
- gpio_direction_output(GPIO_STR, 0);
- gpio_direction_output(GPIO_HSS0_RTS_N, 1);
- gpio_direction_output(GPIO_HSS1_RTS_N, 1);
- gpio_direction_input(GPIO_HSS0_DCD_N);
- gpio_direction_input(GPIO_HSS1_DCD_N);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
-
- set_control(CONTROL_HSS0_DTR_N, 1);
- set_control(CONTROL_HSS1_DTR_N, 1);
- set_control(CONTROL_EEPROM_WC_N, 1);
- set_control(CONTROL_PCI_RESET_N, 1);
- output_control();
-
- msleep(1); /* Wait for PCI devices to initialize */
-
- flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
- flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
- platform_add_devices(device_tab, devices);
-}
-
-
-#ifdef CONFIG_PCI
-static void __init gmlr_pci_preinit(void)
-{
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
- ixp4xx_pci_preinit();
-}
-
-static void __init gmlr_pci_postinit(void)
-{
- if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
- (hw_bits & CFG_HW_USB_PORTS) < 5) {
- /* need to adjust number of USB ports on NEC chip */
- u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
- if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
- value &= ~7;
- value |= (hw_bits & CFG_HW_USB_PORTS);
- ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
- }
- }
-}
-
-static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- switch(slot) {
- case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
- case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
- case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
- default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
- }
-}
-
-static struct hw_pci gmlr_hw_pci __initdata = {
- .nr_controllers = 1,
- .ops = &ixp4xx_ops,
- .preinit = gmlr_pci_preinit,
- .postinit = gmlr_pci_postinit,
- .setup = ixp4xx_setup,
- .map_irq = gmlr_map_irq,
-};
-
-static int __init gmlr_pci_init(void)
-{
- if (machine_is_goramo_mlr() &&
- (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
- pci_common_init(&gmlr_hw_pci);
- return 0;
-}
-
-subsys_initcall(gmlr_pci_init);
-#endif /* CONFIG_PCI */
-
-
-MACHINE_START(GORAMO_MLR, "MultiLink")
- /* Maintainer: Krzysztof Halasa */
- .map_io = ixp4xx_map_io,
- .init_early = ixp4xx_init_early,
- .init_irq = ixp4xx_init_irq,
- .init_time = ixp4xx_timer_init,
- .atag_offset = 0x100,
- .init_machine = gmlr_init,
-#if defined(CONFIG_PCI)
- .dma_zone_size = SZ_64M,
-#endif
- .restart = ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
deleted file mode 100644
index b2b7301ce503..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/hardware.h
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-#define PCIBIOS_MAX_MEM 0x4FFFFFFF
-#else
-#define PCIBIOS_MAX_MEM 0x4BFFFFFF
-#endif
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <linux/soc/ixp4xx/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
deleted file mode 100644
index 014cf6dcaf8b..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ /dev/null
@@ -1,545 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <mach/hardware.h>
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- * To access PCI via this space, we simply ioremap() the BAR
- * into the kernel and we can use the standard read[bwl]/write[bwl]
- * macros. This is the preffered method due to speed but it
- * limits the system to just 64MB of PCI memory. This can be
- * problematic if using video cards and other memory-heavy targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can use indirect
- * registers to access the whole 4 GB of PCI memory space (as we do below
- * for I/O transactions). This allows currently for up to 1 GB (0x10000000
- * to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that
- * every PCI access requires three local register accesses plus a spinlock,
- * but in some cases the performance hit is acceptable. In addition, you
- * cannot mmap() PCI devices in this case.
- */
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-extern unsigned long pcibios_min_mem;
-static inline int is_pci_memory(u32 addr)
-{
- return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
-}
-
-#define writeb(v, p) __indirect_writeb(v, p)
-#define writew(v, p) __indirect_writew(v, p)
-#define writel(v, p) __indirect_writel(v, p)
-
-#define writeb_relaxed(v, p) __indirect_writeb(v, p)
-#define writew_relaxed(v, p) __indirect_writew(v, p)
-#define writel_relaxed(v, p) __indirect_writel(v, p)
-
-#define writesb(p, v, l) __indirect_writesb(p, v, l)
-#define writesw(p, v, l) __indirect_writesw(p, v, l)
-#define writesl(p, v, l) __indirect_writesl(p, v, l)
-
-#define readb(p) __indirect_readb(p)
-#define readw(p) __indirect_readw(p)
-#define readl(p) __indirect_readl(p)
-
-#define readb_relaxed(p) __indirect_readb(p)
-#define readw_relaxed(p) __indirect_readw(p)
-#define readl_relaxed(p) __indirect_readl(p)
-
-#define readsb(p, v, l) __indirect_readsb(p, v, l)
-#define readsw(p, v, l) __indirect_readsw(p, v, l)
-#define readsl(p, v, l) __indirect_readsl(p, v, l)
-
-static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr)) {
- __raw_writeb(value, p);
- return;
- }
-
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesb(volatile void __iomem *bus_addr,
- const void *p, int count)
-{
- const u8 *vaddr = p;
-
- while (count--)
- writeb(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writew(u16 value, volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr)) {
- __raw_writew(value, p);
- return;
- }
-
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesw(volatile void __iomem *bus_addr,
- const void *p, int count)
-{
- const u16 *vaddr = p;
-
- while (count--)
- writew(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writel(u32 value, volatile void __iomem *p)
-{
- u32 addr = (__force u32)p;
-
- if (!is_pci_memory(addr)) {
- __raw_writel(value, p);
- return;
- }
-
- ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void __indirect_writesl(volatile void __iomem *bus_addr,
- const void *p, int count)
-{
- const u32 *vaddr = p;
- while (count--)
- writel(*vaddr++, bus_addr);
-}
-
-static inline u8 __indirect_readb(const volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr))
- return __raw_readb(p);
-
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
- return 0xff;
-
- return data >> (8*n);
-}
-
-static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
- void *p, u32 count)
-{
- u8 *vaddr = p;
-
- while (count--)
- *vaddr++ = readb(bus_addr);
-}
-
-static inline u16 __indirect_readw(const volatile void __iomem *p)
-{
- u32 addr = (u32)p;
- u32 n, byte_enables, data;
-
- if (!is_pci_memory(addr))
- return __raw_readw(p);
-
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
- return 0xffff;
-
- return data>>(8*n);
-}
-
-static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
- void *p, u32 count)
-{
- u16 *vaddr = p;
-
- while (count--)
- *vaddr++ = readw(bus_addr);
-}
-
-static inline u32 __indirect_readl(const volatile void __iomem *p)
-{
- u32 addr = (__force u32)p;
- u32 data;
-
- if (!is_pci_memory(addr))
- return __raw_readl(p);
-
- if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
- return 0xffffffff;
-
- return data;
-}
-
-static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
- void *p, u32 count)
-{
- u32 *vaddr = p;
-
- while (count--)
- *vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l) _memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l))
-
-#endif /* CONFIG_IXP4XX_INDIRECT_PCI */
-
-#ifndef CONFIG_PCI
-
-#define __io(v) __typesafe_io(v)
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window. Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction. This means that we need to override the default
- * I/O functions.
- */
-
-#define outb outb
-static inline void outb(u8 value, u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsb outsb
-static inline void outsb(u32 io_addr, const void *p, u32 count)
-{
- const u8 *vaddr = p;
-
- while (count--)
- outb(*vaddr++, io_addr);
-}
-
-#define outw outw
-static inline void outw(u16 value, u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- data = value << (8*n);
- ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsw outsw
-static inline void outsw(u32 io_addr, const void *p, u32 count)
-{
- const u16 *vaddr = p;
- while (count--)
- outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-#define outl outl
-static inline void outl(u32 value, u32 addr)
-{
- ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-#define outsl outsl
-static inline void outsl(u32 io_addr, const void *p, u32 count)
-{
- const u32 *vaddr = p;
- while (count--)
- outl(cpu_to_le32(*vaddr++), io_addr);
-}
-
-#define inb inb
-static inline u8 inb(u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
- return 0xff;
-
- return data >> (8*n);
-}
-
-#define insb insb
-static inline void insb(u32 io_addr, void *p, u32 count)
-{
- u8 *vaddr = p;
- while (count--)
- *vaddr++ = inb(io_addr);
-}
-
-#define inw inw
-static inline u16 inw(u32 addr)
-{
- u32 n, byte_enables, data;
- n = addr % 4;
- byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
- if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
- return 0xffff;
-
- return data>>(8*n);
-}
-
-#define insw insw
-static inline void insw(u32 io_addr, void *p, u32 count)
-{
- u16 *vaddr = p;
- while (count--)
- *vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-#define inl inl
-static inline u32 inl(u32 addr)
-{
- u32 data;
- if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
- return 0xffffffff;
-
- return data;
-}
-
-#define insl insl
-static inline void insl(u32 io_addr, void *p, u32 count)
-{
- u32 *vaddr = p;
- while (count--)
- *vaddr++ = le32_to_cpu(inl(io_addr));
-}
-
-#define PIO_OFFSET 0x10000UL
-#define PIO_MASK 0x0ffffUL
-
-#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \
- ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-
-#define ioread8(p) ioread8(p)
-static inline u8 ioread8(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)inb(port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return (unsigned int)__raw_readb(addr);
-#else
- return (unsigned int)__indirect_readb(addr);
-#endif
-}
-
-#define ioread8_rep(p, v, c) ioread8_rep(p, v, c)
-static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- insb(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsb(addr, vaddr, count);
-#else
- __indirect_readsb(addr, vaddr, count);
-#endif
-}
-
-#define ioread16(p) ioread16(p)
-static inline u16 ioread16(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)inw(port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le16_to_cpu((__force __le16)__raw_readw(addr));
-#else
- return (unsigned int)__indirect_readw(addr);
-#endif
-}
-
-#define ioread16_rep(p, v, c) ioread16_rep(p, v, c)
-static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- insw(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsw(addr, vaddr, count);
-#else
- __indirect_readsw(addr, vaddr, count);
-#endif
-}
-
-#define ioread32(p) ioread32(p)
-static inline u32 ioread32(const void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- return (unsigned int)inl(port & PIO_MASK);
- else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
- return (unsigned int)__indirect_readl(addr);
-#endif
- }
-}
-
-#define ioread32_rep(p, v, c) ioread32_rep(p, v, c)
-static inline void ioread32_rep(const void __iomem *addr, void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- insl(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_readsl(addr, vaddr, count);
-#else
- __indirect_readsl(addr, vaddr, count);
-#endif
-}
-
-#define iowrite8(v, p) iowrite8(v, p)
-static inline void iowrite8(u8 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outb(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writeb(value, addr);
-#else
- __indirect_writeb(value, addr);
-#endif
-}
-
-#define iowrite8_rep(p, v, c) iowrite8_rep(p, v, c)
-static inline void iowrite8_rep(void __iomem *addr, const void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outsb(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesb(addr, vaddr, count);
-#else
- __indirect_writesb(addr, vaddr, count);
-#endif
-}
-
-#define iowrite16(v, p) iowrite16(v, p)
-static inline void iowrite16(u16 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outw(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writew(cpu_to_le16(value), addr);
-#else
- __indirect_writew(value, addr);
-#endif
-}
-
-#define iowrite16_rep(p, v, c) iowrite16_rep(p, v, c)
-static inline void iowrite16_rep(void __iomem *addr, const void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outsw(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesw(addr, vaddr, count);
-#else
- __indirect_writesw(addr, vaddr, count);
-#endif
-}
-
-#define iowrite32(v, p) iowrite32(v, p)
-static inline void iowrite32(u32 value, void __iomem *addr)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outl(value, port & PIO_MASK);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
- __indirect_writel(value, addr);
-#endif
-}
-
-#define iowrite32_rep(p, v, c) iowrite32_rep(p, v, c)
-static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
- u32 count)
-{
- unsigned long port = (unsigned long __force)addr;
- if (__is_io_address(port))
- outsl(port & PIO_MASK, vaddr, count);
- else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writesl(addr, vaddr, count);
-#else
- __indirect_writesl(addr, vaddr, count);
-#endif
-}
-
-#define ioport_map(port, nr) ioport_map(port, nr)
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- return ((void __iomem*)((port) + PIO_OFFSET));
-}
-#define ioport_unmap(addr) ioport_unmap(addr)
-static inline void ioport_unmap(void __iomem *addr)
-{
-}
-#endif /* CONFIG_PCI */
-
-#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
deleted file mode 100644
index 74e63d4531aa..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains
- * register location and bit definitions only. Platform specific
- * definitions and helper function declarations are in platform.h
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy Size Virt Description
- * =========================================================================
- *
- * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM
- *
- * 0x48000000 0x04000000 ioremap'd PCI Memory Space
- *
- * 0x50000000 0x10000000 ioremap'd EXP BUS
- *
- * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals
- *
- * 0xC0000000 0x00001000 0xFEF13000 PCI CFG
- *
- * 0xC4000000 0x00001000 0xFEF14000 EXP CFG
- *
- * 0x60000000 0x00004000 0xFEF15000 QMgr
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS 0x60000000
-
-/*
- * Peripheral space, including debug UART. Must be section-aligned so that
- * it can be used with the low-level debug code.
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEC00000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEC13000)
-#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000
-#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000
-
-#define IXP4XX_EXP_CS0_OFFSET 0x00
-#define IXP4XX_EXP_CS1_OFFSET 0x04
-#define IXP4XX_EXP_CS2_OFFSET 0x08
-#define IXP4XX_EXP_CS3_OFFSET 0x0C
-#define IXP4XX_EXP_CS4_OFFSET 0x10
-#define IXP4XX_EXP_CS5_OFFSET 0x14
-#define IXP4XX_EXP_CS6_OFFSET 0x18
-#define IXP4XX_EXP_CS7_OFFSET 0x1C
-#define IXP4XX_EXP_CFG0_OFFSET 0x20
-#define IXP4XX_EXP_CFG1_OFFSET 0x24
-#define IXP4XX_EXP_CFG2_OFFSET 0x28
-#define IXP4XX_EXP_CFG3_OFFSET 0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET)
-#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)
-#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET)
-#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET)
-#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET)
-#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-/* The UART is explicitly put in the beginning of fixmap */
-#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions
- */
-#define IXP4XX_OST_ENABLE 0x00000001
-#define IXP4XX_OST_ONE_SHOT 0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK 0x00000003
-#define IXP4XX_OST_DISABLED 0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND 0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND 0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010
-
-#define IXP4XX_WDT_KEY 0x0000482E
-
-#define IXP4XX_WDT_RESET_ENABLE 0x00000001
-#define IXP4XX_WDT_IRQ_ENABLE 0x00000002
-#define IXP4XX_WDT_COUNT_ENABLE 0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET 0x00
-#define PCI_NP_CBE_OFFSET 0x04
-#define PCI_NP_WDATA_OFFSET 0x08
-#define PCI_NP_RDATA_OFFSET 0x0c
-#define PCI_CRP_AD_CBE_OFFSET 0x10
-#define PCI_CRP_WDATA_OFFSET 0x14
-#define PCI_CRP_RDATA_OFFSET 0x18
-#define PCI_CSR_OFFSET 0x1c
-#define PCI_ISR_OFFSET 0x20
-#define PCI_INTEN_OFFSET 0x24
-#define PCI_DMACTRL_OFFSET 0x28
-#define PCI_AHBMEMBASE_OFFSET 0x2c
-#define PCI_AHBIOBASE_OFFSET 0x30
-#define PCI_PCIMEMBASE_OFFSET 0x34
-#define PCI_AHBDOORBELL_OFFSET 0x38
-#define PCI_PCIDOORBELL_OFFSET 0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define _IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD _IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE _IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA _IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA _IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE _IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA _IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA _IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR _IXP4XX_PCI_CSR(PCI_CSR_OFFSET)
-#define PCI_ISR _IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN _IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL _IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE _IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE _IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE _IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL _IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL _IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST 0x00000001
-#define PCI_CSR_ARBEN 0x00000002
-#define PCI_CSR_ADS 0x00000004
-#define PCI_CSR_PDS 0x00000008
-#define PCI_CSR_ABE 0x00000010
-#define PCI_CSR_DBT 0x00000020
-#define PCI_CSR_ASE 0x00000100
-#define PCI_CSR_IC 0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE 0x00000001
-#define PCI_ISR_PFE 0x00000002
-#define PCI_ISR_PPE 0x00000004
-#define PCI_ISR_AHBE 0x00000008
-#define PCI_ISR_APDC 0x00000010
-#define PCI_ISR_PADC 0x00000020
-#define PCI_ISR_ADB 0x00000040
-#define PCI_ISR_PDB 0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE 0x00000001
-#define PCI_INTEN_PFE 0x00000002
-#define PCI_INTEN_PPE 0x00000004
-#define PCI_INTEN_AHBE 0x00000008
-#define PCI_INTEN_APDC 0x00000010
-#define PCI_INTEN_PADC 0x00000020
-#define PCI_INTEN_ADB 0x00000040
-#define PCI_INTEN_PDB 0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL 4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD 0x2
-#define NP_CMD_IOWRITE 0x3
-#define NP_CMD_CONFIGREAD 0xa
-#define NP_CMD_CONFIGWRITE 0xb
-#define NP_CMD_MEMREAD 0x6
-#define NP_CMD_MEMWRITE 0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL 20
-#define CRP_AD_CBE_WRITE 0x00010000
-
-#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
deleted file mode 100644
index d8b4df96db08..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ixp4xx/include/mach/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/reboot.h>
-#include <linux/platform_data/eth_ixp4xx.h>
-
-#include <asm/types.h>
-
-#ifndef __ARMEB__
-#define REG_OFFSET 0
-#else
-#define REG_OFFSET 3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define IXP4XX_EXP_BUS_BASE(region)\
- (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
- (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN (1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN (1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
-
-#define IXP4XX_FLASH_WRITABLE (0x2)
-#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
-#define IXP4XX_FLASH_WRITE (0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */
-#define IXP4XX_UART_XTAL 14745600
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_early(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern void ixp4xx_restart(enum reboot_mode, const char *);
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_ops ixp4xx_ops;
-
-#endif // __ASSEMBLY__
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
deleted file mode 100644
index 7bd8b96c8843..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/udc.h
- *
- */
-#include <linux/platform_data/pxa2xx_udc.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 9e08b270cfc7..09e7663e6a55 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -9,10 +9,12 @@
#ifndef _ARCH_UNCOMPRESS_H_
#define _ARCH_UNCOMPRESS_H_
-#include "ixp4xx-regs.h"
#include <asm/mach-types.h>
#include <linux/serial_reg.h>
+#define IXP4XX_UART1_BASE_PHYS 0xc8000000
+#define IXP4XX_UART2_BASE_PHYS 0xc8001000
+
#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
volatile u32* uart_base;
diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h
deleted file mode 100644
index a3e8d6408c56..000000000000
--- a/arch/arm/mach-ixp4xx/irqs.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_BASE 16
-
-#define IRQ_IXP4XX_NPEA (IRQ_IXP4XX_BASE + 0)
-#define IRQ_IXP4XX_NPEB (IRQ_IXP4XX_BASE + 1)
-#define IRQ_IXP4XX_NPEC (IRQ_IXP4XX_BASE + 2)
-#define IRQ_IXP4XX_QM1 (IRQ_IXP4XX_BASE + 3)
-#define IRQ_IXP4XX_QM2 (IRQ_IXP4XX_BASE + 4)
-#define IRQ_IXP4XX_TIMER1 (IRQ_IXP4XX_BASE + 5)
-#define IRQ_IXP4XX_GPIO0 (IRQ_IXP4XX_BASE + 6)
-#define IRQ_IXP4XX_GPIO1 (IRQ_IXP4XX_BASE + 7)
-#define IRQ_IXP4XX_PCI_INT (IRQ_IXP4XX_BASE + 8)
-#define IRQ_IXP4XX_PCI_DMA1 (IRQ_IXP4XX_BASE + 9)
-#define IRQ_IXP4XX_PCI_DMA2 (IRQ_IXP4XX_BASE + 10)
-#define IRQ_IXP4XX_TIMER2 (IRQ_IXP4XX_BASE + 11)
-#define IRQ_IXP4XX_USB (IRQ_IXP4XX_BASE + 12)
-#define IRQ_IXP4XX_UART2 (IRQ_IXP4XX_BASE + 13)
-#define IRQ_IXP4XX_TIMESTAMP (IRQ_IXP4XX_BASE + 14)
-#define IRQ_IXP4XX_UART1 (IRQ_IXP4XX_BASE + 15)
-#define IRQ_IXP4XX_WDOG (IRQ_IXP4XX_BASE + 16)
-#define IRQ_IXP4XX_AHB_PMU (IRQ_IXP4XX_BASE + 17)
-#define IRQ_IXP4XX_XSCALE_PMU (IRQ_IXP4XX_BASE + 18)
-#define IRQ_IXP4XX_GPIO2 (IRQ_IXP4XX_BASE + 19)
-#define IRQ_IXP4XX_GPIO3 (IRQ_IXP4XX_BASE + 20)
-#define IRQ_IXP4XX_GPIO4 (IRQ_IXP4XX_BASE + 21)
-#define IRQ_IXP4XX_GPIO5 (IRQ_IXP4XX_BASE + 22)
-#define IRQ_IXP4XX_GPIO6 (IRQ_IXP4XX_BASE + 23)
-#define IRQ_IXP4XX_GPIO7 (IRQ_IXP4XX_BASE + 24)
-#define IRQ_IXP4XX_GPIO8 (IRQ_IXP4XX_BASE + 25)
-#define IRQ_IXP4XX_GPIO9 (IRQ_IXP4XX_BASE + 26)
-#define IRQ_IXP4XX_GPIO10 (IRQ_IXP4XX_BASE + 27)
-#define IRQ_IXP4XX_GPIO11 (IRQ_IXP4XX_BASE + 28)
-#define IRQ_IXP4XX_GPIO12 (IRQ_IXP4XX_BASE + 29)
-#define IRQ_IXP4XX_SW_INT1 (IRQ_IXP4XX_BASE + 30)
-#define IRQ_IXP4XX_SW_INT2 (IRQ_IXP4XX_BASE + 31)
-#define IRQ_IXP4XX_USB_HOST (IRQ_IXP4XX_BASE + 32)
-#define IRQ_IXP4XX_I2C (IRQ_IXP4XX_BASE + 33)
-#define IRQ_IXP4XX_SSP (IRQ_IXP4XX_BASE + 34)
-#define IRQ_IXP4XX_TSYNC (IRQ_IXP4XX_BASE + 35)
-#define IRQ_IXP4XX_EAU_DONE (IRQ_IXP4XX_BASE + 36)
-#define IRQ_IXP4XX_SHA_DONE (IRQ_IXP4XX_BASE + 37)
-#define IRQ_IXP4XX_SWCP_PE (IRQ_IXP4XX_BASE + 58)
-#define IRQ_IXP4XX_QM_PE (IRQ_IXP4XX_BASE + 60)
-#define IRQ_IXP4XX_MCU_ECC (IRQ_IXP4XX_BASE + 61)
-#define IRQ_IXP4XX_EXP_PE (IRQ_IXP4XX_BASE + 62)
-
-#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n)
-
-#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
-
-#endif
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
+ platform_set_drvdata(pdev, info);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
list_add(&info->node, &sram_bank_list);
mutex_unlock(&sram_lock);
- platform_set_drvdata(pdev, info);
-
dev_info(&pdev->dev, "initialized\n");
return 0;
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
struct sram_bank_info *info;
info = platform_get_drvdata(pdev);
- if (info == NULL)
- return -ENODEV;
- mutex_lock(&sram_lock);
- list_del(&info->node);
- mutex_unlock(&sram_lock);
+ if (info->sram_size) {
+ mutex_lock(&sram_lock);
+ list_del(&info->node);
+ mutex_unlock(&sram_lock);
+
+ gen_pool_destroy(info->gpool);
+ iounmap(info->sram_virt);
+ kfree(info->pool_name);
+ }
- gen_pool_destroy(info->gpool);
- iounmap(info->sram_virt);
- kfree(info->pool_name);
kfree(info);
+
return 0;
}
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index 0bf4d312bcfd..5dbea7b485af 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -1,6 +1,7 @@
menuconfig ARCH_MSTARV7
bool "MStar/Sigmastar Armv7 SoC Support"
depends on ARCH_MULTI_V7
+ select ARM_ERRATA_814220
select ARM_GIC
select ARM_HEAVY_MB
select HAVE_ARM_ARCH_TIMER
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 788569e960e1..0b5f055ca1c3 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -67,7 +67,6 @@ void __init mv78xx0_init_irq(void)
* registers for core #1 are at an offset of 0x18 from those of
* core #0.)
*/
- orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
- mv78xx0_core_index() ? 0x18 : 0,
+ orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0,
IRQ_MV78XX0_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index b3d161e8e2fb..6ef1b167619b 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -2,7 +2,6 @@
config ARCH_NSPIRE
bool "TI-NSPIRE based"
depends on ARCH_MULTI_V4_V5
- depends on MMU
select CPU_ARM926T
select GENERIC_IRQ_CHIP
select ARM_AMBA
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index e94a61901ffd..c77f3b4e287b 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig ARCH_ORION5X
bool "Marvell Orion"
- depends on MMU && ARCH_MULTI_V5
+ depends on ARCH_MULTI_V5
select CPU_FEROCEON
select GPIOLIB
select MVEBU_MBUS
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index ac4af2283bef..1ae775d02d90 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -49,6 +49,6 @@ void __init orion5x_init_irq(void)
/*
* Initialize gpiolib for GPIOs 0-31.
*/
- orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
+ orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0,
IRQ_ORION5X_GPIO_START, gpio0_irqs);
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f7520a6cc7d4..57f0be4065c1 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -153,16 +153,6 @@ config GUMSTIX_AM300EPD
endchoice
-config MACH_INTELMOTE2
- bool "Intel Mote 2 Platform"
- select IWMMXT
- select PXA27x
-
-config MACH_STARGATE2
- bool "Intel Stargate 2 Platform"
- select IWMMXT
- select PXA27x
-
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select MTD
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 177abe584dd5..68730ceb8b7c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -45,8 +45,6 @@ obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o
-obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index c36306064eee..1ed629e38ce6 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -58,9 +58,8 @@ static inline void arch_decomp_setup(void)
uart_shift = 2;
uart_is_pxa = 1;
- if (machine_is_littleton() || machine_is_intelmote2()
- || machine_is_csb726() || machine_is_stargate2()
- || machine_is_cm_x300() || machine_is_balloon3())
+ if (machine_is_littleton() || machine_is_csb726() ||
+ machine_is_cm_x300() || machine_is_balloon3())
uart_base = STUART_BASE;
if (machine_is_arcom_zeus()) {
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
deleted file mode 100644
index b43e2f4536a5..000000000000
--- a/arch/arm/mach-pxa/stargate2.c
+++ /dev/null
@@ -1,1046 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/stargate2.c
- *
- * Author: Ed C. Epp
- * Created: Nov 05, 2002
- * Copyright: Intel Corp.
- *
- * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk>
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/smc91x.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/property.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <mach/smemc.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mfd/da903x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8)
-
-/* Bluetooth */
-#define SG2_BT_RESET 81
-
-/* SD */
-#define SG2_GPIO_nSD_DETECT 90
-#define SG2_SD_POWER_ENABLE 89
-
-static unsigned long sg2_im2_unified_pin_config[] __initdata = {
- /* Device Identification for wakeup*/
- GPIO102_GPIO,
- /* DA9030 */
- GPIO1_GPIO,
-
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO112_MMC_CMD,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
-
- /* 802.15.4 radio - driver out of mainline */
- GPIO22_GPIO, /* CC_RSTN */
- GPIO114_GPIO, /* CC_FIFO */
- GPIO116_GPIO, /* CC_CCA */
- GPIO0_GPIO, /* CC_FIFOP */
- GPIO16_GPIO, /* CCSFD */
- GPIO115_GPIO, /* Power enable */
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* SSP 3 - 802.15.4 radio */
- GPIO39_GPIO, /* Chip Select */
- GPIO34_SSP3_SCLK,
- GPIO35_SSP3_TXD,
- GPIO41_SSP3_RXD,
-
- /* SSP 2 to daughter boards */
- GPIO11_SSP2_RXD,
- GPIO38_SSP2_TXD,
- GPIO36_SSP2_SCLK,
- GPIO37_GPIO, /* chip select */
-
- /* SSP 1 - to daughter boards */
- GPIO24_GPIO, /* Chip Select */
- GPIO23_SSP1_SCLK,
- GPIO25_SSP1_TXD,
- GPIO26_SSP1_RXD,
-
- /* BTUART Basic Connector*/
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_BTUART_RTS,
-
- /* STUART - IM2 via debug board not sure on SG2*/
- GPIO46_STUART_RXD,
- GPIO47_STUART_TXD,
-
- /* Basic sensor board */
- GPIO96_GPIO, /* accelerometer interrupt */
- GPIO99_GPIO, /* ADC interrupt */
-
- /* SHT15 */
- GPIO100_GPIO,
- GPIO98_GPIO,
-
- /* Basic sensor board */
- GPIO96_GPIO, /* accelerometer interrupt */
- GPIO99_GPIO, /* ADC interrupt */
-
- /* Connector pins specified as gpios */
- GPIO94_GPIO, /* large basic connector pin 14 */
- GPIO10_GPIO, /* large basic connector pin 23 */
-};
-
-static struct gpiod_lookup_table sht15_gpiod_table = {
- .dev_id = "sht15",
- .table = {
- /* FIXME: should this have |GPIO_OPEN_DRAIN set? */
- GPIO_LOOKUP("gpio-pxa", 100, "data", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-pxa", 98, "clk", GPIO_ACTIVE_HIGH),
- },
-};
-
-static struct platform_device sht15 = {
- .name = "sht15",
- .id = -1,
-};
-
-static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
- REGULATOR_SUPPLY("vcc", "sht15"),
-};
-
-enum stargate2_ldos{
- vcc_vref,
- vcc_cc2420,
- /* a mote connector? */
- vcc_mica,
- /* the CSR bluecore chip */
- vcc_bt,
- /* The two voltages available to sensor boards */
- vcc_sensor_1_8,
- vcc_sensor_3,
- /* directly connected to the pxa27x */
- vcc_sram_ext,
- vcc_pxa_pll,
- vcc_pxa_usim, /* Reference voltage for certain gpios */
- vcc_pxa_mem,
- vcc_pxa_flash,
- vcc_pxa_core, /*Dc-Dc buck not yet supported */
- vcc_lcd,
- vcc_bb,
- vcc_bbio, /*not sure!*/
- vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo. Unfortunately this information is
- * not generally available. More information has been requested from Xbow.
- */
-static struct regulator_init_data stargate2_ldo_init_data[] = {
- [vcc_bbio] = {
- .constraints = { /* board default 1.8V */
- .name = "vcc_bbio",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_bb] = {
- .constraints = { /* board default 2.8V */
- .name = "vcc_bb",
- .min_uV = 2700000,
- .max_uV = 3000000,
- },
- },
- [vcc_pxa_flash] = {
- .constraints = {/* default is 1.8V */
- .name = "vcc_pxa_flash",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_cc2420] = { /* also vcc_io */
- .constraints = {
- /* board default is 2.8V */
- .name = "vcc_cc2420",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_vref] = { /* Reference for what? */
- .constraints = { /* default 1.8V */
- .name = "vcc_vref",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sram_ext] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_sram_ext",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_mica] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_mica",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_bt] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_bt",
- .min_uV = 2800000,
- .max_uV = 2800000,
- },
- },
- [vcc_lcd] = {
- .constraints = { /* default 2.8V */
- .name = "vcc_lcd",
- .min_uV = 2700000,
- .max_uV = 3300000,
- },
- },
- [vcc_io] = { /* Same or higher than everything
- * bar vccbat and vccusb */
- .constraints = { /* default 2.8V */
- .name = "vcc_io",
- .min_uV = 2692000,
- .max_uV = 3300000,
- },
- },
- [vcc_sensor_1_8] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_sensor_1_8",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
- [vcc_sensor_3] = { /* curiously default 2.8V */
- .constraints = {
- .name = "vcc_sensor_3",
- .min_uV = 2800000,
- .max_uV = 3000000,
- },
- .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
- .consumer_supplies = stargate2_sensor_3_con,
- },
- [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
- .constraints = {
- .name = "vcc_pxa_pll",
- .min_uV = 1170000,
- .max_uV = 1430000,
- },
- },
- [vcc_pxa_usim] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_usim",
- .min_uV = 1710000,
- .max_uV = 2160000,
- },
- },
- [vcc_pxa_mem] = {
- .constraints = { /* default 1.8V */
- .name = "vcc_pxa_mem",
- .min_uV = 1800000,
- .max_uV = 1800000,
- },
- },
-};
-
-static struct mtd_partition stargate2flash_partitions[] = {
- {
- .name = "Bootloader",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = 0,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00040000,
- .mask_flags = 0
- }, {
- .name = "Filesystem",
- .size = 0x01DC0000,
- .offset = 0x00240000,
- .mask_flags = 0
- },
-};
-
-static struct resource flash_resources = {
- .start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
- .map_name = "cfi_probe",
- .parts = stargate2flash_partitions,
- .nr_parts = ARRAY_SIZE(stargate2flash_partitions),
- .name = "PXA27xOnChipROM",
- .width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
- .name = "pxa2xx-flash",
- .id = 0,
- .dev = {
- .platform_data = &stargate2_flash_data,
- },
- .resource = &flash_resources,
- .num_resources = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_0_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_1_info = {
- .num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_2_info = {
- .num_chipselect = 1,
-};
-
-static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
- .dev_id = "pxa2xx-spi.1",
- .table = {
- GPIO_LOOKUP_IDX("gpio-pxa", 24, "cs", 0, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
- .dev_id = "pxa2xx-spi.3",
- .table = {
- GPIO_LOOKUP_IDX("gpio-pxa", 39, "cs", 0, GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use GPIOs */
-static struct pxa2xx_spi_chip staccel_chip_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
- .tx_threshold = 8,
- .rx_threshold = 8,
- .dma_burst_size = 8,
- .timeout = 235,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "lis3l02dq",
- .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &staccel_chip_info,
- .irq = PXA_GPIO_TO_IRQ(96),
- }, {
- .modalias = "cc2420",
- .max_speed_hz = 6500000,
- .bus_num = 3,
- .chip_select = 0,
- .controller_data = &cc2420_info,
- },
-};
-
-static void sg2_udc_command(int cmd)
-{
- switch (cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
- break;
- }
-}
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
- .fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
- .fast_mode = 1,
-};
-
-static void __init imote2_stargate2_init(void)
-{
-
- pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
-
- pxa_set_ffuart_info(NULL);
- pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
-
- gpiod_add_lookup_table(&pxa_ssp1_gpio_table);
- gpiod_add_lookup_table(&pxa_ssp3_gpio_table);
- pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
- pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
- pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
- spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-
- pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
- pxa_set_i2c_info(&i2c_pdata);
-}
-
-#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
- return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
- .get_ro = imote2_mci_get_ro,
-};
-
-static struct gpio_led imote2_led_pins[] = {
- {
- .name = "imote2:red",
- .gpio = 103,
- .active_low = 1,
- }, {
- .name = "imote2:green",
- .gpio = 104,
- .active_low = 1,
- }, {
- .name = "imote2:blue",
- .gpio = 105,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
- .num_leds = ARRAY_SIZE(imote2_led_pins),
- .leds = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &imote2_led_data,
- },
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
- {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO2,
- .platform_data = &stargate2_ldo_init_data[vcc_bbio],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO3,
- .platform_data = &stargate2_ldo_init_data[vcc_bb],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO4,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO5,
- .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO6,
- .platform_data = &stargate2_ldo_init_data[vcc_vref],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO7,
- .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO8,
- .platform_data = &stargate2_ldo_init_data[vcc_mica],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO9,
- .platform_data = &stargate2_ldo_init_data[vcc_bt],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO10,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO11,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO12,
- .platform_data = &stargate2_ldo_init_data[vcc_lcd],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO15,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO17,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
- }, {
- .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
- .id = DA9030_ID_LDO18,
- .platform_data = &stargate2_ldo_init_data[vcc_io],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO19,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
- },
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
- .subdevs = imote2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &imote2_da9030_pdata,
- .irq = PXA_GPIO_TO_IRQ(1),
- },
-};
-
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
- { /* UCAM sensor board */
- .type = "max1239",
- .addr = 0x35,
- }, { /* ITS400 Sensor board only */
- .type = "max1363",
- .addr = 0x34,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tsl2561",
- .addr = 0x49,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tmp175",
- .addr = 0x4A,
- .irq = PXA_GPIO_TO_IRQ(96),
- }, { /* IMB400 Multimedia board */
- .type = "wm8940",
- .addr = 0x1A,
- },
-};
-
-static unsigned long imote2_pin_config[] __initdata = {
-
- /* Button */
- GPIO91_GPIO,
-
- /* LEDS */
- GPIO103_GPIO, /* red led */
- GPIO104_GPIO, /* green led */
- GPIO105_GPIO, /* blue led */
-};
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
- .udc_command = sg2_udc_command,
-};
-
-static struct platform_device imote2_audio_device = {
- .name = "imote2-audio",
- .id = -1,
-};
-
-static struct platform_device *imote2_devices[] = {
- &stargate2_flash_device,
- &imote2_leds,
- &sht15,
- &imote2_audio_device,
-};
-
-static void __init imote2_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
- imote2_stargate2_init();
-
- gpiod_add_lookup_table(&sht15_gpiod_table);
- platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
- i2c_register_board_info(0, imote2_i2c_board_info,
- ARRAY_SIZE(imote2_i2c_board_info));
- i2c_register_board_info(1, imote2_pwr_i2c_board_info,
- ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
- pxa_set_mci_info(&imote2_mci_platform_data);
- pxa_set_udc_info(&imote2_udc_info);
-}
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-
-static unsigned long stargate2_pin_config[] __initdata = {
-
- GPIO15_nCS_1, /* SRAM */
- /* SMC91x */
- GPIO80_nCS_4,
- GPIO40_GPIO, /*cable detect?*/
-
- /* Button */
- GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
- /* Compact Flash */
- GPIO79_PSKTSEL,
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO85_nPCE_1,
- GPIO54_nPCE_2,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
- GPIO120_GPIO, /* Buff ctrl */
- GPIO108_GPIO, /* Power ctrl */
- GPIO82_GPIO, /* Reset */
- GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
- /* MMC not shared with imote2 */
- GPIO90_GPIO, /* nSD detect */
- GPIO89_GPIO, /* SD_POWER_ENABLE */
-
- /* Bluetooth */
- GPIO81_GPIO, /* reset */
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .name = "smc91x-regs",
- .start = (PXA_CS4_PHYS + 0x300),
- .end = (PXA_CS4_PHYS + 0xfffff),
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = PXA_GPIO_TO_IRQ(40),
- .end = PXA_GPIO_TO_IRQ(40),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
- .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
- | SMC91X_NOWAIT | SMC91X_USE_DMA,
- .pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
- .dev = {
- .platform_data = &stargate2_smc91x_info,
- },
-};
-
-
-/*
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert / eject.
- */
-static int stargate2_mci_init(struct device *dev,
- irq_handler_t stargate2_detect_int,
- void *data)
-{
- int err;
-
- err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
- if (err) {
- printk(KERN_ERR "Can't get the gpio for SD power control");
- goto return_err;
- }
- gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
-
- err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
- if (err) {
- printk(KERN_ERR "Can't get the sd detect gpio");
- goto free_power_en;
- }
- gpio_direction_input(SG2_GPIO_nSD_DETECT);
-
- err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
- stargate2_detect_int,
- IRQ_TYPE_EDGE_BOTH,
- "MMC card detect",
- data);
- if (err) {
- printk(KERN_ERR "can't request MMC card detect IRQ\n");
- goto free_nsd_detect;
- }
- return 0;
-
- free_nsd_detect:
- gpio_free(SG2_GPIO_nSD_DETECT);
- free_power_en:
- gpio_free(SG2_SD_POWER_ENABLE);
- return_err:
- return err;
-}
-
-/**
- * stargate2_mci_setpower() - set state of mmc power supply
- *
- * Very simple control. Either it is on or off and is controlled by
- * a gpio pin */
-static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
-{
- gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
- return 0;
-}
-
-static void stargate2_mci_exit(struct device *dev, void *data)
-{
- free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
- gpio_free(SG2_SD_POWER_ENABLE);
- gpio_free(SG2_GPIO_nSD_DETECT);
-}
-
-static struct pxamci_platform_data stargate2_mci_platform_data = {
- .detect_delay_ms = 250,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = stargate2_mci_init,
- .setpower = stargate2_mci_setpower,
- .exit = stargate2_mci_exit,
-};
-
-
-/*
- * SRAM - The Stargate 2 has 32MB of SRAM.
- *
- * Here it is made available as an MTD. This will then
- * typically have a cifs filesystem created on it to provide
- * fast temporary storage.
- */
-static struct resource sram_resources = {
- .start = PXA_CS1_PHYS,
- .end = PXA_CS1_PHYS + SZ_32M-1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platdata_mtd_ram stargate2_sram_pdata = {
- .mapname = "Stargate2 SRAM",
- .bankwidth = 2,
-};
-
-static struct platform_device stargate2_sram = {
- .name = "mtd-ram",
- .id = 0,
- .resource = &sram_resources,
- .num_resources = 1,
- .dev = {
- .platform_data = &stargate2_sram_pdata,
- },
-};
-
-static struct pcf857x_platform_data platform_data_pcf857x = {
- .gpio_base = 128,
- .n_latch = 0,
- .setup = NULL,
- .teardown = NULL,
- .context = NULL,
-};
-
-static const struct property_entry pca9500_eeprom_properties[] = {
- PROPERTY_ENTRY_U32("pagesize", 4),
- { }
-};
-
-static const struct software_node pca9500_eeprom_node = {
- .properties = pca9500_eeprom_properties,
-};
-
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
- int err;
- err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
- if (err) {
- printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
- return err;
- }
- gpio_direction_output(SG2_BT_RESET, 1);
- mdelay(5);
- /* now reset it - 5 msec minimum */
- gpio_set_value(SG2_BT_RESET, 0);
- mdelay(10);
- gpio_set_value(SG2_BT_RESET, 1);
- gpio_free(SG2_BT_RESET);
- return 0;
-}
-
-static struct led_info stargate2_leds[] = {
- {
- .name = "sg2:red",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:blue",
- .flags = DA9030_LED_RATE_ON,
- }, {
- .name = "sg2:green",
- .flags = DA9030_LED_RATE_ON,
- },
-};
-
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
- {
- .name = "da903x-led",
- .id = DA9030_ID_LED_2,
- .platform_data = &stargate2_leds[0],
- }, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_3,
- .platform_data = &stargate2_leds[2],
- }, {
- .name = "da903x-led",
- .id = DA9030_ID_LED_4,
- .platform_data = &stargate2_leds[1],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO2,
- .platform_data = &stargate2_ldo_init_data[vcc_bbio],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO3,
- .platform_data = &stargate2_ldo_init_data[vcc_bb],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO4,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO5,
- .platform_data = &stargate2_ldo_init_data[vcc_cc2420],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO6,
- .platform_data = &stargate2_ldo_init_data[vcc_vref],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO7,
- .platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO8,
- .platform_data = &stargate2_ldo_init_data[vcc_mica],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO9,
- .platform_data = &stargate2_ldo_init_data[vcc_bt],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO10,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO11,
- .platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO12,
- .platform_data = &stargate2_ldo_init_data[vcc_lcd],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO15,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO17,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
- }, {
- .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
- .id = DA9030_ID_LDO18,
- .platform_data = &stargate2_ldo_init_data[vcc_io],
- }, {
- .name = "da903x-regulator",
- .id = DA9030_ID_LDO19,
- .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
- },
-};
-
-static struct da903x_platform_data stargate2_da9030_pdata = {
- .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
- .subdevs = stargate2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
- {
- .type = "da9030",
- .addr = 0x49,
- .platform_data = &stargate2_da9030_pdata,
- .irq = PXA_GPIO_TO_IRQ(1),
- },
-};
-
-static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
- /* Techically this a pca9500 - but it's compatible with the 8574
- * for gpio expansion and the 24c02 for eeprom access.
- */
- {
- .type = "pcf8574",
- .addr = 0x27,
- .platform_data = &platform_data_pcf857x,
- }, {
- .type = "24c02",
- .addr = 0x57,
- .swnode = &pca9500_eeprom_node,
- }, {
- .type = "max1238",
- .addr = 0x35,
- }, { /* ITS400 Sensor board only */
- .type = "max1363",
- .addr = 0x34,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tsl2561",
- .addr = 0x49,
- /* Through a nand gate - Also beware, on V2 sensor board the
- * pull up resistors are missing.
- */
- .irq = PXA_GPIO_TO_IRQ(99),
- }, { /* ITS400 Sensor board only */
- .type = "tmp175",
- .addr = 0x4A,
- .irq = PXA_GPIO_TO_IRQ(96),
- },
-};
-
-/* Board doesn't support cable detection - so always lie and say
- * something is there.
- */
-static int sg2_udc_detect(void)
-{
- return 1;
-}
-
-static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
- .udc_is_connected = sg2_udc_detect,
- .udc_command = sg2_udc_command,
-};
-
-static struct platform_device *stargate2_devices[] = {
- &stargate2_flash_device,
- &stargate2_sram,
- &smc91x_device,
- &sht15,
-};
-
-static void __init stargate2_init(void)
-{
- /* This is probably a board specific hack as this must be set
- prior to connecting the MFP stuff up. */
- __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
-
- pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
-
- imote2_stargate2_init();
-
- gpiod_add_lookup_table(&sht15_gpiod_table);
- platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
-
- i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
- i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
- ARRAY_SIZE(stargate2_pwr_i2c_board_info));
-
- pxa_set_mci_info(&stargate2_mci_platform_data);
-
- pxa_set_udc_info(&stargate2_udc_info);
-
- stargate2_reset_bluetooth();
-}
-#endif
-
-#ifdef CONFIG_MACH_INTELMOTE2
-MACHINE_START(INTELMOTE2, "IMOTE 2")
- .map_io = pxa27x_map_io,
- .nr_irqs = PXA_NR_IRQS,
- .init_irq = pxa27x_init_irq,
- .handle_irq = pxa27x_handle_irq,
- .init_time = pxa_timer_init,
- .init_machine = imote2_init,
- .atag_offset = 0x100,
- .restart = pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-MACHINE_START(STARGATE2, "Stargate 2")
- .map_io = pxa27x_map_io,
- .nr_irqs = STARGATE_NR_IRQS,
- .init_irq = pxa27x_init_irq,
- .handle_irq = pxa27x_handle_irq,
- .init_time = pxa_timer_init,
- .init_machine = stargate2_init,
- .atag_offset = 0x100,
- .restart = pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3683d6f10973..50909c4b95b2 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
- depends on ARCH_MULTI_V7 && MMU
+ depends on ARCH_MULTI_V7
select ARM_GIC
select GPIOLIB
select NO_IOPORT_MAP
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 24ed7f4a87a4..c18def269137 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
menuconfig ARCH_U8500
bool "ST-Ericsson U8500 Series"
- depends on ARCH_MULTI_V7 && MMU
+ depends on ARCH_MULTI_V7
select AB8500_CORE
select ABX500_CORE
select ARM_AMBA
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 734f0be4f14a..3ef9ecdd6343 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -516,8 +516,7 @@ static void orion_gpio_mask_irq(struct irq_data *d)
irq_gc_unlock(gc);
}
-void __init orion_gpio_init(struct device_node *np,
- int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
void __iomem *base, int mask_offset,
int secondary_irq_base,
int irqs[4])
@@ -545,9 +544,6 @@ void __init orion_gpio_init(struct device_node *np,
ochip->chip.base = gpio_base;
ochip->chip.ngpio = ngpio;
ochip->chip.can_sleep = 0;
-#ifdef CONFIG_OF
- ochip->chip.of_node = np;
-#endif
ochip->chip.dbg_show = orion_gpio_dbg_show;
spin_lock_init(&ochip->lock);
@@ -605,7 +601,7 @@ void __init orion_gpio_init(struct device_node *np,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */
- ochip->domain = irq_domain_add_legacy(np,
+ ochip->domain = irq_domain_add_legacy(NULL,
ochip->chip.ngpio,
ochip->secondary_irq_base,
ochip->secondary_irq_base,
diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index e856b073a9c8..25a2963e0e0f 100644
--- a/arch/arm/plat-orion/include/plat/orion-gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -30,8 +30,7 @@ int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
void orion_gpio_set_valid(unsigned pin, int mode);
/* Initialize gpiolib. */
-void __init orion_gpio_init(struct device_node *np,
- int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
void __iomem *base, int mask_offset,
int secondary_irq_base,
int irq[4]);
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 98730aab287c..d39a386b31ac 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -33,7 +33,6 @@
/* Intermittent includes, delete this after v5.14-rc1 */
#include <linux/soc/ixp4xx/cpu.h>
-#include <mach/ixp4xx-regs.h>
#define MAX_KEYLEN 32
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index 0e878fa6e322..b33f64c54b0e 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -20,9 +20,9 @@ if NET_VENDOR_XSCALE
config IXP4XX_ETH
tristate "Intel IXP4xx Ethernet support"
- depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR && OF
select PHYLIB
- select OF_MDIO if OF
+ select OF_MDIO
select NET_PTP_CLASSIFY
help
Say Y here if you want to use built-in Ethernet ports
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index df77a22d1b81..d947955621ee 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -30,7 +30,6 @@
#include <linux/of.h>
#include <linux/of_mdio.h>
#include <linux/phy.h>
-#include <linux/platform_data/eth_ixp4xx.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
@@ -38,6 +37,11 @@
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
#include <linux/soc/ixp4xx/cpu.h>
+#include <linux/types.h>
+
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
#include "ixp46x_ts.h"
@@ -147,6 +151,16 @@ typedef void buffer_t;
#define free_buffer_irq kfree
#endif
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 txreadyq;
+ u8 hwaddr[6];
+ u8 npe; /* NPE instance used by this interface */
+ bool has_mdio; /* If this instance has an MDIO bus */
+};
+
struct eth_regs {
u32 tx_control[2], __res1[2]; /* 000 */
u32 rx_control[2], __res2[2]; /* 010 */
@@ -1366,7 +1380,6 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-#ifdef CONFIG_OF
static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
{
struct device_node *np = dev->of_node;
@@ -1417,12 +1430,6 @@ static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
return plat;
}
-#else
-static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev)
-{
- return NULL;
-}
-#endif
static int ixp4xx_eth_probe(struct platform_device *pdev)
{
@@ -1434,49 +1441,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
struct port *port;
int err;
- if (np) {
- plat = ixp4xx_of_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- } else {
- plat = dev_get_platdata(dev);
- if (!plat)
- return -ENODEV;
- plat->npe = pdev->id;
- switch (plat->npe) {
- case IXP4XX_ETH_NPEA:
- /* If the MDIO bus is not up yet, defer probe */
- break;
- case IXP4XX_ETH_NPEB:
- /* On all except IXP43x, NPE-B is used for the MDIO bus.
- * If there is no NPE-B in the feature set, bail out,
- * else we have the MDIO bus here.
- */
- if (!cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEB_ETH0))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- case IXP4XX_ETH_NPEC:
- /* IXP43x lacks NPE-B and uses NPE-C for the MDIO bus
- * access, if there is no NPE-C, no bus, nothing works,
- * so bail out.
- */
- if (cpu_is_ixp43x()) {
- if (!(ixp4xx_read_feature_bits() &
- IXP4XX_FEATURE_NPEC_ETH))
- return -ENODEV;
- /* Else register the MDIO bus on NPE-B */
- plat->has_mdio = true;
- }
- break;
- default:
- return -ENODEV;
- }
- }
+ plat = ixp4xx_of_get_platdata(dev);
+ if (!plat)
+ return -ENODEV;
if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port))))
return -ENOMEM;
@@ -1530,21 +1497,7 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
udelay(50);
- if (np) {
- phydev = of_phy_get_and_connect(ndev, np, ixp4xx_adjust_link);
- } else {
- phydev = mdiobus_get_phy(mdio_bus, plat->phy);
- if (!phydev) {
- err = -ENODEV;
- dev_err(dev, "could not connect phydev (%d)\n", err);
- goto err_free_mem;
- }
- err = phy_connect_direct(ndev, phydev, ixp4xx_adjust_link,
- PHY_INTERFACE_MODE_MII);
- if (err)
- goto err_free_mem;
-
- }
+ phydev = of_phy_get_and_connect(ndev, np, ixp4xx_adjust_link);
if (!phydev) {
err = -ENODEV;
dev_err(dev, "no phydev\n");
diff --git a/drivers/net/ethernet/xscale/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
index 39234852e01b..1f382777aa5a 100644
--- a/drivers/net/ethernet/xscale/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -16,7 +16,6 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/platform_device.h>
#include <linux/soc/ixp4xx/cpu.h>
-#include <mach/ixp4xx-regs.h>
#include "ixp46x_ts.h"
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 592a8389fc5a..140780ac1745 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -293,7 +293,8 @@ config SLIC_DS26522
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
- depends on ARCH_IXP4XX
+ depends on ARCH_IXP4XX && OF
+ select MFD_SYSCON
help
Say Y here if you want to use built-in HSS ports
on IXP4xx processor.
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 0b7d9f2f2b8b..863c3e34e136 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -16,8 +16,10 @@
#include <linux/hdlc.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
@@ -1389,9 +1391,28 @@ static int ixp4xx_hss_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct net_device *ndev;
struct device_node *np;
+ struct regmap *rmap;
struct port *port;
hdlc_device *hdlc;
int err;
+ u32 val;
+
+ /*
+ * Go into the syscon and check if we have the HSS and HDLC
+ * features available, else this will not work.
+ */
+ rmap = syscon_regmap_lookup_by_compatible("syscon");
+ if (IS_ERR(rmap))
+ return dev_err_probe(dev, PTR_ERR(rmap),
+ "failed to look up syscon\n");
+
+ val = cpu_ixp4xx_features(rmap);
+
+ if ((val & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) {
+ dev_err(dev, "HDLC and HSS feature unavailable in platform\n");
+ return -ENODEV;
+ }
np = dev->of_node;
@@ -1516,25 +1537,9 @@ static struct platform_driver ixp4xx_hss_driver = {
.probe = ixp4xx_hss_probe,
.remove = ixp4xx_hss_remove,
};
-
-static int __init hss_init_module(void)
-{
- if ((ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
- (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
- return -ENODEV;
-
- return platform_driver_register(&ixp4xx_hss_driver);
-}
-
-static void __exit hss_cleanup_module(void)
-{
- platform_driver_unregister(&ixp4xx_hss_driver);
-}
+module_platform_driver(ixp4xx_hss_driver);
MODULE_AUTHOR("Krzysztof Halasa");
MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ixp4xx_hss");
-module_init(hss_init_module);
-module_exit(hss_cleanup_module);
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index ab53eab635f6..2ce261cfff8e 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -210,7 +210,7 @@ config PCMCIA_PXA2XX
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| ARCH_PXA_PALM || TRIZEPS_PCMCIA \
- || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
+ || ARCOM_PCMCIA || ARCH_PXA_ESERIES \
|| MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
|| MACH_COLIBRI320 || MACH_H4700)
select PCMCIA_SOC_COMMON
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 2d5657cfc49c..c43267b18f55 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -56,7 +56,6 @@ pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o
pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
-pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
deleted file mode 100644
index 6efb7f814b4a..000000000000
--- a/drivers/pcmcia/pxa2xx_stargate2.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_stargate2.c
- *
- * Stargate 2 PCMCIA specific routines.
- *
- * Created: December 6, 2005
- * Author: Ed C. Epp
- * Copyright: Intel Corp 2005
- * Jonathan Cameron <jic23@cam.ac.uk> 2009
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <pcmcia/ss.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "soc_common.h"
-
-#define SG2_S0_POWER_CTL 108
-#define SG2_S0_GPIO_RESET 82
-#define SG2_S0_GPIO_DETECT 53
-#define SG2_S0_GPIO_READY 81
-
-static struct gpio sg2_pcmcia_gpios[] = {
- { SG2_S0_GPIO_RESET, GPIOF_OUT_INIT_HIGH, "PCMCIA Reset" },
- { SG2_S0_POWER_CTL, GPIOF_OUT_INIT_HIGH, "PCMCIA Power Ctrl" },
-};
-
-static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
- skt->stat[SOC_STAT_CD].gpio = SG2_S0_GPIO_DETECT;
- skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
- skt->stat[SOC_STAT_RDY].gpio = SG2_S0_GPIO_READY;
- skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY";
- return 0;
-}
-
-static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
- struct pcmcia_state *state)
-{
- state->bvd1 = 0; /* not available - battery detect on card */
- state->bvd2 = 0; /* not available */
- state->vs_3v = 1; /* not available - voltage detect for card */
- state->vs_Xv = 0; /* not available */
-}
-
-static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
- const socket_state_t *state)
-{
- /* Enable card power */
- switch (state->Vcc) {
- case 0:
- /* sets power ctl register high */
- gpio_set_value(SG2_S0_POWER_CTL, 1);
- break;
- case 33:
- case 50:
- /* sets power control register low (clear) */
- gpio_set_value(SG2_S0_POWER_CTL, 0);
- msleep(100);
- break;
- default:
- pr_err("%s(): bad Vcc %u\n",
- __func__, state->Vcc);
- return -1;
- }
-
- /* reset */
- gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET));
-
- return 0;
-}
-
-static struct pcmcia_low_level sg2_pcmcia_ops __initdata = {
- .owner = THIS_MODULE,
- .hw_init = sg2_pcmcia_hw_init,
- .socket_state = sg2_pcmcia_socket_state,
- .configure_socket = sg2_pcmcia_configure_socket,
- .nr = 1,
-};
-
-static struct platform_device *sg2_pcmcia_device;
-
-static int __init sg2_pcmcia_init(void)
-{
- int ret;
-
- if (!machine_is_stargate2())
- return -ENODEV;
-
- sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
- if (!sg2_pcmcia_device)
- return -ENOMEM;
-
- ret = gpio_request_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios));
- if (ret)
- goto error_put_platform_device;
-
- ret = platform_device_add_data(sg2_pcmcia_device,
- &sg2_pcmcia_ops,
- sizeof(sg2_pcmcia_ops));
- if (ret)
- goto error_free_gpios;
-
- ret = platform_device_add(sg2_pcmcia_device);
- if (ret)
- goto error_free_gpios;
-
- return 0;
-error_free_gpios:
- gpio_free_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios));
-error_put_platform_device:
- platform_device_put(sg2_pcmcia_device);
-
- return ret;
-}
-
-static void __exit sg2_pcmcia_exit(void)
-{
- platform_device_unregister(sg2_pcmcia_device);
- gpio_free_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios));
-}
-
-fs_initcall(sg2_pcmcia_init);
-module_exit(sg2_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index a8562678c437..c5aae42673d3 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -13,6 +13,7 @@ source "drivers/soc/imx/Kconfig"
source "drivers/soc/ixp4xx/Kconfig"
source "drivers/soc/litex/Kconfig"
source "drivers/soc/mediatek/Kconfig"
+source "drivers/soc/microchip/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/renesas/Kconfig"
source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index adb30c2d4fea..904eec2a7871 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -18,6 +18,7 @@ obj-y += ixp4xx/
obj-$(CONFIG_SOC_XWAY) += lantiq/
obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
obj-y += mediatek/
+obj-y += microchip/
obj-y += amlogic/
obj-y += qcom/
obj-y += renesas/
diff --git a/drivers/soc/ixp4xx/Kconfig b/drivers/soc/ixp4xx/Kconfig
index e3eb19b85fa4..c55f0c9ae513 100644
--- a/drivers/soc/ixp4xx/Kconfig
+++ b/drivers/soc/ixp4xx/Kconfig
@@ -12,6 +12,7 @@ config IXP4XX_QMGR
config IXP4XX_NPE
tristate "IXP4xx Network Processor Engine support"
select FW_LOADER
+ select MFD_SYSCON
help
This driver supports IXP4xx built-in network coprocessors
and is automatically selected by Ethernet and HSS drivers.
diff --git a/drivers/soc/ixp4xx/ixp4xx-npe.c b/drivers/soc/ixp4xx/ixp4xx-npe.c
index f490c4ca51f5..613935cb6a48 100644
--- a/drivers/soc/ixp4xx/ixp4xx-npe.c
+++ b/drivers/soc/ixp4xx/ixp4xx-npe.c
@@ -16,6 +16,7 @@
#include <linux/firmware.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -284,6 +285,7 @@ static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
static int npe_reset(struct npe *npe)
{
+ u32 reset_bit = (IXP4XX_FEATURE_RESET_NPEA << npe->id);
u32 val, ctl, exec_count, ctx_reg2;
int i;
@@ -380,16 +382,19 @@ static int npe_reset(struct npe *npe)
__raw_writel(0, &npe->regs->action_points[3]);
__raw_writel(0, &npe->regs->watch_count);
- val = ixp4xx_read_feature_bits();
+ /*
+ * We need to work on cached values here because the register
+ * will read inverted but needs to be written non-inverted.
+ */
+ val = cpu_ixp4xx_features(npe->rmap);
/* reset the NPE */
- ixp4xx_write_feature_bits(val &
- ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
+ regmap_write(npe->rmap, IXP4XX_EXP_CNFG2, val & ~reset_bit);
/* deassert reset */
- ixp4xx_write_feature_bits(val |
- (IXP4XX_FEATURE_RESET_NPEA << npe->id));
+ regmap_write(npe->rmap, IXP4XX_EXP_CNFG2, val | reset_bit);
+
for (i = 0; i < MAX_RETRIES; i++) {
- if (ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_RESET_NPEA << npe->id))
+ val = cpu_ixp4xx_features(npe->rmap);
+ if (val & reset_bit)
break; /* NPE is back alive */
udelay(1);
}
@@ -683,6 +688,14 @@ static int ixp4xx_npe_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct resource *res;
+ struct regmap *rmap;
+ u32 val;
+
+ /* This system has only one syscon, so fetch it */
+ rmap = syscon_regmap_lookup_by_compatible("syscon");
+ if (IS_ERR(rmap))
+ return dev_err_probe(dev, PTR_ERR(rmap),
+ "failed to look up syscon\n");
for (i = 0; i < NPE_COUNT; i++) {
struct npe *npe = &npe_tab[i];
@@ -691,8 +704,9 @@ static int ixp4xx_npe_probe(struct platform_device *pdev)
if (!res)
return -ENODEV;
- if (!(ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_RESET_NPEA << i))) {
+ val = cpu_ixp4xx_features(rmap);
+
+ if (!(val & (IXP4XX_FEATURE_RESET_NPEA << i))) {
dev_info(dev, "NPE%d at %pR not available\n",
i, res);
continue; /* NPE already disabled or not present */
@@ -700,6 +714,7 @@ static int ixp4xx_npe_probe(struct platform_device *pdev)
npe->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(npe->regs))
return PTR_ERR(npe->regs);
+ npe->rmap = rmap;
if (npe_reset(npe)) {
dev_info(dev, "NPE%d at %pR does not reset\n",
diff --git a/drivers/soc/microchip/Kconfig b/drivers/soc/microchip/Kconfig
new file mode 100644
index 000000000000..eb656b33156b
--- /dev/null
+++ b/drivers/soc/microchip/Kconfig
@@ -0,0 +1,10 @@
+config POLARFIRE_SOC_SYS_CTRL
+ tristate "POLARFIRE_SOC_SYS_CTRL"
+ depends on POLARFIRE_SOC_MAILBOX
+ help
+ This driver adds support for the PolarFire SoC (MPFS) system controller.
+
+ To compile this driver as a module, choose M here. the
+ module will be called mpfs_system_controller.
+
+ If unsure, say N.
diff --git a/drivers/soc/microchip/Makefile b/drivers/soc/microchip/Makefile
new file mode 100644
index 000000000000..14489919fe4b
--- /dev/null
+++ b/drivers/soc/microchip/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POLARFIRE_SOC_SYS_CTRL) += mpfs-sys-controller.o
diff --git a/drivers/soc/microchip/mpfs-sys-controller.c b/drivers/soc/microchip/mpfs-sys-controller.c
new file mode 100644
index 000000000000..31f3f29fc1ae
--- /dev/null
+++ b/drivers/soc/microchip/mpfs-sys-controller.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip PolarFire SoC (MPFS) system controller driver
+ *
+ * Copyright (c) 2020-2021 Microchip Corporation. All rights reserved.
+ *
+ * Author: Conor Dooley <conor.dooley@microchip.com>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/mailbox_client.h>
+#include <linux/platform_device.h>
+#include <soc/microchip/mpfs.h>
+
+static DEFINE_MUTEX(transaction_lock);
+
+struct mpfs_sys_controller {
+ struct mbox_client client;
+ struct mbox_chan *chan;
+ struct completion c;
+ struct kref consumers;
+};
+
+int mpfs_blocking_transaction(struct mpfs_sys_controller *sys_controller, struct mpfs_mss_msg *msg)
+{
+ int ret, err;
+
+ err = mutex_lock_interruptible(&transaction_lock);
+ if (err)
+ return err;
+
+ reinit_completion(&sys_controller->c);
+
+ ret = mbox_send_message(sys_controller->chan, msg);
+ if (ret >= 0) {
+ if (wait_for_completion_timeout(&sys_controller->c, HZ)) {
+ ret = 0;
+ } else {
+ ret = -ETIMEDOUT;
+ dev_warn(sys_controller->client.dev,
+ "MPFS sys controller transaction timeout\n");
+ }
+ } else {
+ dev_err(sys_controller->client.dev,
+ "mpfs sys controller transaction returned %d\n", ret);
+ }
+
+ mutex_unlock(&transaction_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(mpfs_blocking_transaction);
+
+static void rx_callback(struct mbox_client *client, void *msg)
+{
+ struct mpfs_sys_controller *sys_controller =
+ container_of(client, struct mpfs_sys_controller, client);
+
+ complete(&sys_controller->c);
+}
+
+static void mpfs_sys_controller_delete(struct kref *kref)
+{
+ struct mpfs_sys_controller *sys_controller = container_of(kref, struct mpfs_sys_controller,
+ consumers);
+
+ mbox_free_channel(sys_controller->chan);
+ kfree(sys_controller);
+}
+
+static void mpfs_sys_controller_put(void *data)
+{
+ struct mpfs_sys_controller *sys_controller = data;
+
+ kref_put(&sys_controller->consumers, mpfs_sys_controller_delete);
+}
+
+static struct platform_device subdevs[] = {
+ {
+ .name = "mpfs-rng",
+ .id = -1,
+ },
+ {
+ .name = "mpfs-generic-service",
+ .id = -1,
+ }
+};
+
+static int mpfs_sys_controller_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mpfs_sys_controller *sys_controller;
+ int i;
+
+ sys_controller = devm_kzalloc(dev, sizeof(*sys_controller), GFP_KERNEL);
+ if (!sys_controller)
+ return -ENOMEM;
+
+ sys_controller->client.dev = dev;
+ sys_controller->client.rx_callback = rx_callback;
+ sys_controller->client.tx_block = 1U;
+
+ sys_controller->chan = mbox_request_channel(&sys_controller->client, 0);
+ if (IS_ERR(sys_controller->chan))
+ return dev_err_probe(dev, PTR_ERR(sys_controller->chan),
+ "Failed to get mbox channel\n");
+
+ init_completion(&sys_controller->c);
+ kref_init(&sys_controller->consumers);
+
+ platform_set_drvdata(pdev, sys_controller);
+
+ dev_info(&pdev->dev, "Registered MPFS system controller\n");
+
+ for (i = 0; i < ARRAY_SIZE(subdevs); i++) {
+ subdevs[i].dev.parent = dev;
+ if (platform_device_register(&subdevs[i]))
+ dev_warn(dev, "Error registering sub device %s\n", subdevs[i].name);
+ }
+
+ return 0;
+}
+
+static int mpfs_sys_controller_remove(struct platform_device *pdev)
+{
+ struct mpfs_sys_controller *sys_controller = platform_get_drvdata(pdev);
+
+ mpfs_sys_controller_put(sys_controller);
+
+ return 0;
+}
+
+static const struct of_device_id mpfs_sys_controller_of_match[] = {
+ {.compatible = "microchip,mpfs-sys-controller", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mpfs_sys_controller_of_match);
+
+struct mpfs_sys_controller *mpfs_sys_controller_get(struct device *dev)
+{
+ const struct of_device_id *match;
+ struct mpfs_sys_controller *sys_controller;
+ int ret;
+
+ if (!dev->parent)
+ goto err_no_device;
+
+ match = of_match_node(mpfs_sys_controller_of_match, dev->parent->of_node);
+ of_node_put(dev->parent->of_node);
+ if (!match)
+ goto err_no_device;
+
+ sys_controller = dev_get_drvdata(dev->parent);
+ if (!sys_controller)
+ goto err_bad_device;
+
+ if (!kref_get_unless_zero(&sys_controller->consumers))
+ goto err_bad_device;
+
+ ret = devm_add_action_or_reset(dev, mpfs_sys_controller_put, sys_controller);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return sys_controller;
+
+err_no_device:
+ dev_dbg(dev, "Parent device was not an MPFS system controller\n");
+ return ERR_PTR(-ENODEV);
+
+err_bad_device:
+ dev_dbg(dev, "MPFS system controller found but could not register as a sub device\n");
+ return ERR_PTR(-EPROBE_DEFER);
+}
+EXPORT_SYMBOL(mpfs_sys_controller_get);
+
+static struct platform_driver mpfs_sys_controller_driver = {
+ .driver = {
+ .name = "mpfs-sys-controller",
+ .of_match_table = mpfs_sys_controller_of_match,
+ },
+ .probe = mpfs_sys_controller_probe,
+ .remove = mpfs_sys_controller_remove,
+};
+module_platform_driver(mpfs_sys_controller_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_DESCRIPTION("MPFS system controller driver");
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index ccb3f034bfa9..3484309b59bf 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -78,6 +78,10 @@
#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */
+
+#define AT91_PMC_RATIO 0x2c /* Processor clock ratio register [SAMA7G5 only] */
+#define AT91_PMC_RATIO_RATIO (0xf) /* CPU clock ratio. */
+
#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */
#define AT91_PMC_DIV (0xff << 0) /* Divider */
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
diff --git a/include/linux/platform_data/eth_ixp4xx.h b/include/linux/platform_data/eth_ixp4xx.h
deleted file mode 100644
index 114b0940729f..000000000000
--- a/include/linux/platform_data/eth_ixp4xx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_ETH_IXP4XX
-#define __PLATFORM_DATA_ETH_IXP4XX
-
-#include <linux/types.h>
-
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
- u8 npe; /* NPE instance used by this interface */
- bool has_mdio; /* If this instance has an MDIO bus */
-};
-
-#endif
diff --git a/include/linux/platform_data/wan_ixp4xx_hss.h b/include/linux/platform_data/wan_ixp4xx_hss.h
deleted file mode 100644
index d525a0feb9e1..000000000000
--- a/include/linux/platform_data/wan_ixp4xx_hss.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_WAN_IXP4XX_HSS_H
-#define __PLATFORM_DATA_WAN_IXP4XX_HSS_H
-
-#include <linux/types.h>
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
- int (*set_clock)(int port, unsigned int clock_type);
- int (*open)(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier));
- void (*close)(int port, void *pdev);
- u8 txreadyq;
- u32 timer_freq;
-};
-
-#endif
diff --git a/include/linux/soc/ixp4xx/cpu.h b/include/linux/soc/ixp4xx/cpu.h
index 88bd8de0e803..f526ac33afea 100644
--- a/include/linux/soc/ixp4xx/cpu.h
+++ b/include/linux/soc/ixp4xx/cpu.h
@@ -9,6 +9,7 @@
#define __SOC_IXP4XX_CPU_H__
#include <linux/io.h>
+#include <linux/regmap.h>
#ifdef CONFIG_ARM
#include <asm/cputype.h>
#endif
@@ -23,6 +24,9 @@
#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+/* Feature register in the expansion bus controller */
+#define IXP4XX_EXP_CNFG2 0x2c
+
/* "fuse" bits of IXP_EXP_CFG2 */
/* All IXP4xx CPUs */
#define IXP4XX_FEATURE_RCOMP (1 << 0)
@@ -86,21 +90,31 @@
IXP43X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
IXP46X_PROCESSOR_ID_VALUE)
+static inline u32 cpu_ixp4xx_features(struct regmap *rmap)
+{
+ u32 val;
-u32 ixp4xx_read_feature_bits(void);
-void ixp4xx_write_feature_bits(u32 value);
+ regmap_read(rmap, IXP4XX_EXP_CNFG2, &val);
+ /* For some reason this register is inverted */
+ val = ~val;
+ if (cpu_is_ixp42x_rev_a0())
+ return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+ IXP4XX_FEATURE_AES);
+ if (cpu_is_ixp42x())
+ return val & IXP42X_FEATURE_MASK;
+ if (cpu_is_ixp43x())
+ return val & IXP43X_FEATURE_MASK;
+ return val & IXP46X_FEATURE_MASK;
+}
#else
#define cpu_is_ixp42x_rev_a0() 0
#define cpu_is_ixp42x() 0
#define cpu_is_ixp43x() 0
#define cpu_is_ixp46x() 0
-static inline u32 ixp4xx_read_feature_bits(void)
+static inline u32 cpu_ixp4xx_features(struct regmap *rmap)
{
return 0;
}
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
-}
#endif
#endif /* _ASM_ARCH_CPU_H */
diff --git a/include/linux/soc/ixp4xx/npe.h b/include/linux/soc/ixp4xx/npe.h
index 2a91f465d456..9efeac777da1 100644
--- a/include/linux/soc/ixp4xx/npe.h
+++ b/include/linux/soc/ixp4xx/npe.h
@@ -3,6 +3,7 @@
#define __IXP4XX_NPE_H
#include <linux/kernel.h>
+#include <linux/regmap.h>
extern const char *npe_names[];
@@ -17,6 +18,7 @@ struct npe_regs {
struct npe {
struct npe_regs __iomem *regs;
+ struct regmap *rmap;
int id;
int valid;
};
diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h
index f6542584ca13..9e17247474fa 100644
--- a/include/soc/at91/sama7-ddr.h
+++ b/include/soc/at91/sama7-ddr.h
@@ -11,15 +11,13 @@
#ifndef __SAMA7_DDR_H__
#define __SAMA7_DDR_H__
-#ifdef CONFIG_SOC_SAMA7
-
/* DDR3PHY */
#define DDR3PHY_PIR (0x04) /* DDR3PHY PHY Initialization Register */
-#define DDR3PHY_PIR_DLLBYP (1 << 17) /* DLL Bypass */
+#define DDR3PHY_PIR_DLLBYP (1 << 17) /* DLL Bypass */
#define DDR3PHY_PIR_ITMSRST (1 << 4) /* Interface Timing Module Soft Reset */
-#define DDR3PHY_PIR_DLLLOCK (1 << 2) /* DLL Lock */
+#define DDR3PHY_PIR_DLLLOCK (1 << 2) /* DLL Lock */
#define DDR3PHY_PIR_DLLSRST (1 << 1) /* DLL Soft Rest */
-#define DDR3PHY_PIR_INIT (1 << 0) /* Initialization Trigger */
+#define DDR3PHY_PIR_INIT (1 << 0) /* Initialization Trigger */
#define DDR3PHY_PGCR (0x08) /* DDR3PHY PHY General Configuration Register */
#define DDR3PHY_PGCR_CKDV1 (1 << 13) /* CK# Disable Value */
@@ -55,7 +53,8 @@
#define UDDRC_STAT_OPMODE_MSK (0x7 << 0) /* Operating mode mask */
#define UDDRC_PWRCTL (0x30) /* UDDRC Low Power Control Register */
-#define UDDRC_PWRCTRL_SELFREF_SW (1 << 5) /* Software self-refresh */
+#define UDDRC_PWRCTL_SELFREF_EN (1 << 0) /* Automatic self-refresh */
+#define UDDRC_PWRCTL_SELFREF_SW (1 << 5) /* Software self-refresh */
#define UDDRC_DFIMISC (0x1B0) /* UDDRC DFI Miscellaneous Control Register */
#define UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN (1 << 0) /* PHY initialization complete enable signal */
@@ -67,7 +66,7 @@
#define UDDRC_SWSTAT_SW_DONE_ACK (1 << 0) /* Register programming done */
#define UDDRC_PSTAT (0x3FC) /* UDDRC Port Status Register */
-#define UDDRC_PSTAT_ALL_PORTS (0x1F001F) /* Read + writes outstanding transactions on all ports */
+#define UDDRC_PSTAT_ALL_PORTS (0x1F001F) /* Read + writes outstanding transactions on all ports */
#define UDDRC_PCTRL_0 (0x490) /* UDDRC Port 0 Control Register */
#define UDDRC_PCTRL_1 (0x540) /* UDDRC Port 1 Control Register */
@@ -75,6 +74,4 @@
#define UDDRC_PCTRL_3 (0x6A0) /* UDDRC Port 3 Control Register */
#define UDDRC_PCTRL_4 (0x750) /* UDDRC Port 4 Control Register */
-#endif /* CONFIG_SOC_SAMA7 */
-
#endif /* __SAMA7_DDR_H__ */
diff --git a/include/soc/microchip/mpfs.h b/include/soc/microchip/mpfs.h
index 2b64c95f3be5..6466515262bd 100644
--- a/include/soc/microchip/mpfs.h
+++ b/include/soc/microchip/mpfs.h
@@ -34,9 +34,9 @@ struct mpfs_mss_response {
#if IS_ENABLED(CONFIG_POLARFIRE_SOC_SYS_CTRL)
-int mpfs_blocking_transaction(struct mpfs_sys_controller *mpfs_client, void *msg);
+int mpfs_blocking_transaction(struct mpfs_sys_controller *mpfs_client, struct mpfs_mss_msg *msg);
-struct mpfs_sys_controller *mpfs_sys_controller_get(struct device_node *mailbox_node);
+struct mpfs_sys_controller *mpfs_sys_controller_get(struct device *dev);
#endif /* if IS_ENABLED(CONFIG_POLARFIRE_SOC_SYS_CTRL) */
diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c
index 9478eccd1c8e..559461a826ba 100644
--- a/kernel/dma/mapping.c
+++ b/kernel/dma/mapping.c
@@ -745,7 +745,6 @@ int dma_set_mask(struct device *dev, u64 mask)
}
EXPORT_SYMBOL(dma_set_mask);
-#ifndef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK
int dma_set_coherent_mask(struct device *dev, u64 mask)
{
/*
@@ -761,7 +760,6 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)
return 0;
}
EXPORT_SYMBOL(dma_set_coherent_mask);
-#endif
size_t dma_max_mapping_size(struct device *dev)
{
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 9d40e8a206d1..cecbec2a09d7 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -220,15 +220,6 @@ config SND_PXA2XX_SOC_MIOA701
Say Y if you want to add support for SoC audio on the
MIO A701.
-config SND_PXA2XX_SOC_IMOTE2
- tristate "SoC Audio support for IMote 2"
- depends on SND_PXA2XX_SOC && MACH_INTELMOTE2 && I2C
- select SND_PXA2XX_SOC_I2S
- select SND_SOC_WM8940
- help
- Say Y if you want to add support for SoC audio on the
- IMote 2.
-
config SND_MMP_SOC_BROWNSTONE
tristate "SoC Audio support for Marvell Brownstone"
depends on SND_MMP_SOC_SSPA && MACH_BROWNSTONE && I2C
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index ea4929d73318..b712eb894a61 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -29,7 +29,6 @@ snd-soc-hx4700-objs := hx4700.o
snd-soc-magician-objs := magician.o
snd-soc-mioa701-objs := mioa701_wm9713.o
snd-soc-z2-objs := z2.o
-snd-soc-imote2-objs := imote2.o
snd-soc-brownstone-objs := brownstone.o
snd-soc-ttc-dkb-objs := ttc-dkb.o
@@ -47,6 +46,5 @@ obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o
obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
-obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
obj-$(CONFIG_SND_MMP_SOC_BROWNSTONE) += snd-soc-brownstone.o
obj-$(CONFIG_SND_SOC_TTC_DKB) += snd-soc-ttc-dkb.o
diff --git a/sound/soc/pxa/imote2.c b/sound/soc/pxa/imote2.c
deleted file mode 100644
index a575676508b3..000000000000
--- a/sound/soc/pxa/imote2.c
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/module.h>
-#include <sound/soc.h>
-
-#include <asm/mach-types.h>
-
-#include "../codecs/wm8940.h"
-#include "pxa2xx-i2s.h"
-
-static int imote2_asoc_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
- struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
- unsigned int clk = 0;
- int ret;
-
- switch (params_rate(params)) {
- case 8000:
- case 16000:
- case 48000:
- case 96000:
- clk = 12288000;
- break;
- case 11025:
- case 22050:
- case 44100:
- clk = 11289600;
- break;
- }
-
- ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
- SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- /* set the I2S system clock as input (unused) */
- ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, clk,
- SND_SOC_CLOCK_OUT);
-
- return ret;
-}
-
-static const struct snd_soc_ops imote2_asoc_ops = {
- .hw_params = imote2_asoc_hw_params,
-};
-
-SND_SOC_DAILINK_DEFS(wm8940,
- DAILINK_COMP_ARRAY(COMP_CPU("pxa2xx-i2s")),
- DAILINK_COMP_ARRAY(COMP_CODEC("wm8940-codec.0-0034",
- "wm8940-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("pxa-pcm-audio")));
-
-static struct snd_soc_dai_link imote2_dai = {
- .name = "WM8940",
- .stream_name = "WM8940",
- .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBS_CFS,
- .ops = &imote2_asoc_ops,
- SND_SOC_DAILINK_REG(wm8940),
-};
-
-static struct snd_soc_card imote2 = {
- .name = "Imote2",
- .owner = THIS_MODULE,
- .dai_link = &imote2_dai,
- .num_links = 1,
-};
-
-static int imote2_probe(struct platform_device *pdev)
-{
- struct snd_soc_card *card = &imote2;
- int ret;
-
- card->dev = &pdev->dev;
-
- ret = devm_snd_soc_register_card(&pdev->dev, card);
- if (ret)
- dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
- ret);
- return ret;
-}
-
-static struct platform_driver imote2_driver = {
- .driver = {
- .name = "imote2-audio",
- .pm = &snd_soc_pm_ops,
- },
- .probe = imote2_probe,
-};
-
-module_platform_driver(imote2_driver);
-
-MODULE_AUTHOR("Jonathan Cameron");
-MODULE_DESCRIPTION("ALSA SoC Imote 2");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:imote2-audio");