diff options
| -rw-r--r-- | drivers/net/phy/mdio-bcm-unimac.c | 32 |
1 files changed, 26 insertions, 6 deletions
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c index 73c5267a11fd..08e0647b85e2 100644 --- a/drivers/net/phy/mdio-bcm-unimac.c +++ b/drivers/net/phy/mdio-bcm-unimac.c @@ -47,18 +47,38 @@ struct unimac_mdio_priv { void *wait_func_data; }; +static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset) +{ + /* MIPS chips strapped for BE will automagically configure the + * peripheral registers for CPU-native byte order. + */ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + return __raw_readl(priv->base + offset); + else + return readl_relaxed(priv->base + offset); +} + +static inline void unimac_mdio_writel(struct unimac_mdio_priv *priv, u32 val, + u32 offset) +{ + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + __raw_writel(val, priv->base + offset); + else + writel_relaxed(val, priv->base + offset); +} + static inline void unimac_mdio_start(struct unimac_mdio_priv *priv) { u32 reg; - reg = __raw_readl(priv->base + MDIO_CMD); + reg = unimac_mdio_readl(priv, MDIO_CMD); reg |= MDIO_START_BUSY; - __raw_writel(reg, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, reg, MDIO_CMD); } static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv) { - return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY; + return unimac_mdio_readl(priv, MDIO_CMD) & MDIO_START_BUSY; } static int unimac_mdio_poll(void *wait_func_data) @@ -87,7 +107,7 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) /* Prepare the read operation */ cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT); - __raw_writel(cmd, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, cmd, MDIO_CMD); /* Start MDIO transaction */ unimac_mdio_start(priv); @@ -96,7 +116,7 @@ static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg) if (ret) return ret; - cmd = __raw_readl(priv->base + MDIO_CMD); + cmd = unimac_mdio_readl(priv, MDIO_CMD); /* Some broken devices are known not to release the line during * turn-around, e.g: Broadcom BCM53125 external switches, so check for @@ -118,7 +138,7 @@ static int unimac_mdio_write(struct mii_bus *bus, int phy_id, /* Prepare the write operation */ cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT) | (0xffff & val); - __raw_writel(cmd, priv->base + MDIO_CMD); + unimac_mdio_writel(priv, cmd, MDIO_CMD); unimac_mdio_start(priv); |