summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/pci/pci.c73
-rw-r--r--include/linux/pci.h16
2 files changed, 0 insertions, 89 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 020f672deabb..84a24d16778f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2150,79 +2150,6 @@ void pci_disable_ido(struct pci_dev *dev, unsigned long type)
}
EXPORT_SYMBOL(pci_disable_ido);
-/**
- * pci_enable_obff - enable optimized buffer flush/fill
- * @dev: PCI device
- * @type: type of signaling to use
- *
- * Try to enable @type OBFF signaling on @dev. It will try using WAKE#
- * signaling if possible, falling back to message signaling only if
- * WAKE# isn't supported. @type should indicate whether the PCIe link
- * be brought out of L0s or L1 to send the message. It should be either
- * %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
- *
- * If your device can benefit from receiving all messages, even at the
- * power cost of bringing the link back up from a low power state, use
- * %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
- * preferred type).
- *
- * RETURNS:
- * Zero on success, appropriate error number on failure.
- */
-int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
-{
- u32 cap;
- u16 ctrl;
- int ret;
-
- pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
- if (!(cap & PCI_EXP_DEVCAP2_OBFF_MASK))
- return -ENOTSUPP; /* no OBFF support at all */
-
- /* Make sure the topology supports OBFF as well */
- if (dev->bus->self) {
- ret = pci_enable_obff(dev->bus->self, type);
- if (ret)
- return ret;
- }
-
- pcie_capability_read_word(dev, PCI_EXP_DEVCTL2, &ctrl);
- if (cap & PCI_EXP_DEVCAP2_OBFF_WAKE)
- ctrl |= PCI_EXP_DEVCTL2_OBFF_WAKE_EN;
- else {
- switch (type) {
- case PCI_EXP_OBFF_SIGNAL_L0:
- if (!(ctrl & PCI_EXP_DEVCTL2_OBFF_WAKE_EN))
- ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGA_EN;
- break;
- case PCI_EXP_OBFF_SIGNAL_ALWAYS:
- ctrl &= ~PCI_EXP_DEVCTL2_OBFF_WAKE_EN;
- ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGB_EN;
- break;
- default:
- WARN(1, "bad OBFF signal type\n");
- return -ENOTSUPP;
- }
- }
- pcie_capability_write_word(dev, PCI_EXP_DEVCTL2, ctrl);
-
- return 0;
-}
-EXPORT_SYMBOL(pci_enable_obff);
-
-/**
- * pci_disable_obff - disable optimized buffer flush/fill
- * @dev: PCI device
- *
- * Disable OBFF on @dev.
- */
-void pci_disable_obff(struct pci_dev *dev)
-{
- pcie_capability_clear_word(dev, PCI_EXP_DEVCTL2,
- PCI_EXP_DEVCTL2_OBFF_WAKE_EN);
-}
-EXPORT_SYMBOL(pci_disable_obff);
-
static int pci_acs_enable;
/**
diff --git a/include/linux/pci.h b/include/linux/pci.h
index ee26454746ba..b8cbe52c7a48 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1002,13 +1002,6 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
void pci_enable_ido(struct pci_dev *dev, unsigned long type);
void pci_disable_ido(struct pci_dev *dev, unsigned long type);
-enum pci_obff_signal_type {
- PCI_EXP_OBFF_SIGNAL_L0 = 0,
- PCI_EXP_OBFF_SIGNAL_ALWAYS = 1,
-};
-int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type);
-void pci_disable_obff(struct pci_dev *dev);
-
/* For use by arch with custom probe code */
void set_pcie_port_type(struct pci_dev *pdev);
void set_pcie_hotplug_bridge(struct pci_dev *pdev);
@@ -1427,15 +1420,6 @@ static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type)
{
}
-static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type)
-{
- return 0;
-}
-
-static inline void pci_disable_obff(struct pci_dev *dev)
-{
-}
-
static inline int pci_request_regions(struct pci_dev *dev, const char *res_name)
{
return -EIO;