summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,spdif.txt5
-rw-r--r--sound/soc/fsl/fsl_spdif.c19
2 files changed, 24 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index b5ee32ee3706..4ca39ddc0417 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -27,6 +27,11 @@ Required properties:
Transceiver Clock Diagram" of SoC reference manual.
It can also be referred to TxClk_Source bit of
register SPDIF_STC.
+ "spba" The spba clock is required when SPDIF is placed as a
+ bus slave of the Shared Peripheral Bus and when two
+ or more bus masters (CPU, DMA or DSP) try to access
+ it. This property is optional depending on the SoC
+ design.
- big-endian : If this property is absent, the native endian mode
will be in use as default, or the big endian mode
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 3d59bb6719f2..fa36e6753799 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -88,6 +88,7 @@ struct spdif_mixer_control {
* @rxclk: rx clock sources for capture
* @coreclk: core clock for register access via DMA
* @sysclk: system clock for rx clock rate measurement
+ * @spbaclk: SPBA clock (optional, depending on SoC design)
* @dma_params_tx: DMA parameters for transmit channel
* @dma_params_rx: DMA parameters for receive channel
*/
@@ -106,6 +107,7 @@ struct fsl_spdif_priv {
struct clk *rxclk;
struct clk *coreclk;
struct clk *sysclk;
+ struct clk *spbaclk;
struct snd_dmaengine_dai_dma_data dma_params_tx;
struct snd_dmaengine_dai_dma_data dma_params_rx;
/* regcache for SRPC */
@@ -474,6 +476,14 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream,
return ret;
}
+ if (!IS_ERR(spdif_priv->spbaclk)) {
+ ret = clk_prepare_enable(spdif_priv->spbaclk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable spba clock\n");
+ goto err_spbaclk;
+ }
+ }
+
ret = spdif_softreset(spdif_priv);
if (ret) {
dev_err(&pdev->dev, "failed to soft reset\n");
@@ -515,6 +525,9 @@ disable_txclk:
for (i--; i >= 0; i--)
clk_disable_unprepare(spdif_priv->txclk[i]);
err:
+ if (!IS_ERR(spdif_priv->spbaclk))
+ clk_disable_unprepare(spdif_priv->spbaclk);
+err_spbaclk:
clk_disable_unprepare(spdif_priv->coreclk);
return ret;
@@ -548,6 +561,8 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
spdif_intr_status_clear(spdif_priv);
regmap_update_bits(regmap, REG_SPDIF_SCR,
SCR_LOW_POWER, SCR_LOW_POWER);
+ if (!IS_ERR(spdif_priv->spbaclk))
+ clk_disable_unprepare(spdif_priv->spbaclk);
clk_disable_unprepare(spdif_priv->coreclk);
}
}
@@ -1261,6 +1276,10 @@ static int fsl_spdif_probe(struct platform_device *pdev)
return PTR_ERR(spdif_priv->coreclk);
}
+ spdif_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
+ if (IS_ERR(spdif_priv->spbaclk))
+ dev_warn(&pdev->dev, "no spba clock in devicetree\n");
+
/* Select clock source for rx/tx clock */
spdif_priv->rxclk = devm_clk_get(&pdev->dev, "rxtx1");
if (IS_ERR(spdif_priv->rxclk)) {