diff options
| -rw-r--r-- | Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml index 5bc941355b43..d81c2e849ca9 100644 --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml @@ -311,6 +311,62 @@ properties: maximum: 62 deprecated: true + snps,rx-thr-num-pkt: + description: + USB RX packet threshold count. In host mode, this field specifies + the space that must be available in the RX FIFO before the core can + start the corresponding USB RX transaction (burst). + In device mode, this field specifies the space that must be + available in the RX FIFO before the core can send ERDY for a + flow-controlled endpoint. It is only used for SuperSpeed. + The valid values for this field are from 1 to 15. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,rx-max-burst: + description: + Max USB RX burst size. In host mode, this field specifies the + Maximum Bulk IN burst the DWC_usb3 core can perform. When the system + bus is slower than the USB, RX FIFO can overrun during a long burst. + You can program a smaller value to this field to limit the RX burst + size that the core can perform. It only applies to SS Bulk, + Isochronous, and Interrupt IN endpoints in the host mode. + In device mode, this field specifies the NUMP value that is sent in + ERDY for an OUT endpoint. + The valid values for this field are from 1 to 16. (DWC3 SuperSpeed + USB 3.0 Controller Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + + snps,tx-thr-num-pkt: + description: + USB TX packet threshold count. This field specifies the number of + packets that must be in the TXFIFO before the core can start + transmission for the corresponding USB transaction (burst). + This count is valid in both host and device modes. It is only used + for SuperSpeed operation. + Valid values are from 1 to 15. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 15 + + snps,tx-max-burst: + description: + Max USB TX burst size. When the system bus is slower than the USB, + TX FIFO can underrun during a long burst. Program a smaller value + to this field to limit the TX burst size that the core can execute. + In Host mode, it only applies to SS Bulk, Isochronous, and Interrupt + OUT endpoints. This value is not used in device mode. + Valid values are from 1 to 16. (DWC3 SuperSpeed USB 3.0 Controller + Databook) + $ref: /schemas/types.yaml#/definitions/uint8 + minimum: 1 + maximum: 16 + snps,rx-thr-num-pkt-prd: description: Periodic ESS RX packet threshold count (host mode only). Set this and |