summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/gpu/drm/meson/Kconfig7
-rw-r--r--drivers/gpu/drm/meson/Makefile1
-rw-r--r--drivers/gpu/drm/meson/meson_dw_mipi_dsi.c352
-rw-r--r--drivers/gpu/drm/meson/meson_dw_mipi_dsi.h160
4 files changed, 520 insertions, 0 deletions
diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
index 823909da87db..615fdd0ce41b 100644
--- a/drivers/gpu/drm/meson/Kconfig
+++ b/drivers/gpu/drm/meson/Kconfig
@@ -17,3 +17,10 @@ config DRM_MESON_DW_HDMI
default y if DRM_MESON
select DRM_DW_HDMI
imply DRM_DW_HDMI_I2S_AUDIO
+
+config DRM_MESON_DW_MIPI_DSI
+ tristate "MIPI DSI Synopsys Controller support for Amlogic Meson Display"
+ depends on DRM_MESON
+ default y if DRM_MESON
+ select DRM_DW_MIPI_DSI
+ select GENERIC_PHY_MIPI_DPHY
diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
index 833e18c20603..43071bdbd4b9 100644
--- a/drivers/gpu/drm/meson/Makefile
+++ b/drivers/gpu/drm/meson/Makefile
@@ -6,3 +6,4 @@ meson-drm-y += meson_encoder_hdmi.o meson_encoder_dsi.o
obj-$(CONFIG_DRM_MESON) += meson-drm.o
obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
+obj-$(CONFIG_DRM_MESON_DW_MIPI_DSI) += meson_dw_mipi_dsi.o
diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
new file mode 100644
index 000000000000..dd505ac37976
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/bitfield.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_device.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_print.h>
+
+#include "meson_drv.h"
+#include "meson_dw_mipi_dsi.h"
+#include "meson_registers.h"
+#include "meson_venc.h"
+
+#define DRIVER_NAME "meson-dw-mipi-dsi"
+#define DRIVER_DESC "Amlogic Meson MIPI-DSI DRM driver"
+
+struct meson_dw_mipi_dsi {
+ struct meson_drm *priv;
+ struct device *dev;
+ void __iomem *base;
+ struct phy *phy;
+ union phy_configure_opts phy_opts;
+ struct dw_mipi_dsi *dmd;
+ struct dw_mipi_dsi_plat_data pdata;
+ struct mipi_dsi_device *dsi_device;
+ const struct drm_display_mode *mode;
+ struct clk *bit_clk;
+ struct clk *px_clk;
+ struct reset_control *top_rst;
+};
+
+#define encoder_to_meson_dw_mipi_dsi(x) \
+ container_of(x, struct meson_dw_mipi_dsi, encoder)
+
+static void meson_dw_mipi_dsi_hw_init(struct meson_dw_mipi_dsi *mipi_dsi)
+{
+ /* Software reset */
+ writel_bits_relaxed(MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+ MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+ MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+ MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+ mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
+ writel_bits_relaxed(MIPI_DSI_TOP_SW_RESET_DWC | MIPI_DSI_TOP_SW_RESET_INTR |
+ MIPI_DSI_TOP_SW_RESET_DPI | MIPI_DSI_TOP_SW_RESET_TIMING,
+ 0, mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
+
+ /* Enable clocks */
+ writel_bits_relaxed(MIPI_DSI_TOP_CLK_SYSCLK_EN | MIPI_DSI_TOP_CLK_PIXCLK_EN,
+ MIPI_DSI_TOP_CLK_SYSCLK_EN | MIPI_DSI_TOP_CLK_PIXCLK_EN,
+ mipi_dsi->base + MIPI_DSI_TOP_CLK_CNTL);
+
+ /* Take memory out of power down */
+ writel_relaxed(0, mipi_dsi->base + MIPI_DSI_TOP_MEM_PD);
+}
+
+static int dw_mipi_dsi_phy_init(void *priv_data)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+ unsigned int dpi_data_format, venc_data_width;
+ int ret;
+
+ /* Set the bit clock rate to hs_clk_rate */
+ ret = clk_set_rate(mipi_dsi->bit_clk,
+ mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate);
+ if (ret) {
+ dev_err(mipi_dsi->dev, "Failed to set DSI Bit clock rate %lu (ret %d)\n",
+ mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate, ret);
+ return ret;
+ }
+
+ /* Make sure the rate of the bit clock is not modified by someone else */
+ ret = clk_rate_exclusive_get(mipi_dsi->bit_clk);
+ if (ret) {
+ dev_err(mipi_dsi->dev,
+ "Failed to set the exclusivity on the bit clock rate (ret %d)\n", ret);
+ return ret;
+ }
+
+ ret = clk_set_rate(mipi_dsi->px_clk, mipi_dsi->mode->clock * 1000);
+
+ if (ret) {
+ dev_err(mipi_dsi->dev, "Failed to set DSI Pixel clock rate %u (%d)\n",
+ mipi_dsi->mode->clock * 1000, ret);
+ return ret;
+ }
+
+ switch (mipi_dsi->dsi_device->format) {
+ case MIPI_DSI_FMT_RGB888:
+ dpi_data_format = DPI_COLOR_24BIT;
+ venc_data_width = VENC_IN_COLOR_24B;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ dpi_data_format = DPI_COLOR_18BIT_CFG_2;
+ venc_data_width = VENC_IN_COLOR_18B;
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ case MIPI_DSI_FMT_RGB565:
+ return -EINVAL;
+ };
+
+ /* Configure color format for DPI register */
+ writel_relaxed(FIELD_PREP(MIPI_DSI_TOP_DPI_COLOR_MODE, dpi_data_format) |
+ FIELD_PREP(MIPI_DSI_TOP_IN_COLOR_MODE, venc_data_width) |
+ FIELD_PREP(MIPI_DSI_TOP_COMP2_SEL, 2) |
+ FIELD_PREP(MIPI_DSI_TOP_COMP1_SEL, 1) |
+ FIELD_PREP(MIPI_DSI_TOP_COMP0_SEL, 0),
+ mipi_dsi->base + MIPI_DSI_TOP_CNTL);
+
+ return phy_configure(mipi_dsi->phy, &mipi_dsi->phy_opts);
+}
+
+static void dw_mipi_dsi_phy_power_on(void *priv_data)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+ if (phy_power_on(mipi_dsi->phy))
+ dev_warn(mipi_dsi->dev, "Failed to power on PHY\n");
+}
+
+static void dw_mipi_dsi_phy_power_off(void *priv_data)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+ if (phy_power_off(mipi_dsi->phy))
+ dev_warn(mipi_dsi->dev, "Failed to power off PHY\n");
+
+ /* Remove the exclusivity on the bit clock rate */
+ clk_rate_exclusive_put(mipi_dsi->bit_clk);
+}
+
+static int
+dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
+ unsigned long mode_flags, u32 lanes, u32 format,
+ unsigned int *lane_mbps)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+ int bpp;
+
+ mipi_dsi->mode = mode;
+
+ bpp = mipi_dsi_pixel_format_to_bpp(mipi_dsi->dsi_device->format);
+
+ phy_mipi_dphy_get_default_config(mode->clock * 1000,
+ bpp, mipi_dsi->dsi_device->lanes,
+ &mipi_dsi->phy_opts.mipi_dphy);
+
+ *lane_mbps = DIV_ROUND_UP(mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate, USEC_PER_SEC);
+
+ return 0;
+}
+
+static int
+dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
+ struct dw_mipi_dsi_dphy_timing *timing)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+ switch (mipi_dsi->mode->hdisplay) {
+ case 240:
+ case 768:
+ case 1920:
+ case 2560:
+ timing->clk_lp2hs = 23;
+ timing->clk_hs2lp = 38;
+ timing->data_lp2hs = 15;
+ timing->data_hs2lp = 9;
+ break;
+
+ default:
+ timing->clk_lp2hs = 37;
+ timing->clk_hs2lp = 135;
+ timing->data_lp2hs = 50;
+ timing->data_hs2lp = 3;
+ }
+
+ return 0;
+}
+
+static int
+dw_mipi_dsi_get_esc_clk_rate(void *priv_data, unsigned int *esc_clk_rate)
+{
+ *esc_clk_rate = 4; /* Mhz */
+
+ return 0;
+}
+
+static const struct dw_mipi_dsi_phy_ops meson_dw_mipi_dsi_phy_ops = {
+ .init = dw_mipi_dsi_phy_init,
+ .power_on = dw_mipi_dsi_phy_power_on,
+ .power_off = dw_mipi_dsi_phy_power_off,
+ .get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
+ .get_timing = dw_mipi_dsi_phy_get_timing,
+ .get_esc_clk_rate = dw_mipi_dsi_get_esc_clk_rate,
+};
+
+static int meson_dw_mipi_dsi_host_attach(void *priv_data,
+ struct mipi_dsi_device *device)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+ int ret;
+
+ mipi_dsi->dsi_device = device;
+
+ switch (device->format) {
+ case MIPI_DSI_FMT_RGB888:
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ case MIPI_DSI_FMT_RGB565:
+ dev_err(mipi_dsi->dev, "invalid pixel format %d\n", device->format);
+ return -EINVAL;
+ };
+
+ ret = phy_init(mipi_dsi->phy);
+ if (ret)
+ return ret;
+
+ meson_dw_mipi_dsi_hw_init(mipi_dsi);
+
+ return 0;
+}
+
+static int meson_dw_mipi_dsi_host_detach(void *priv_data,
+ struct mipi_dsi_device *device)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
+
+ if (device == mipi_dsi->dsi_device)
+ mipi_dsi->dsi_device = NULL;
+ else
+ return -EINVAL;
+
+ return phy_exit(mipi_dsi->phy);
+}
+
+static const struct dw_mipi_dsi_host_ops meson_dw_mipi_dsi_host_ops = {
+ .attach = meson_dw_mipi_dsi_host_attach,
+ .detach = meson_dw_mipi_dsi_host_detach,
+};
+
+static int meson_dw_mipi_dsi_probe(struct platform_device *pdev)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi;
+ struct device *dev = &pdev->dev;
+
+ mipi_dsi = devm_kzalloc(dev, sizeof(*mipi_dsi), GFP_KERNEL);
+ if (!mipi_dsi)
+ return -ENOMEM;
+
+ mipi_dsi->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(mipi_dsi->base))
+ return PTR_ERR(mipi_dsi->base);
+
+ mipi_dsi->phy = devm_phy_get(dev, "dphy");
+ if (IS_ERR(mipi_dsi->phy))
+ return dev_err_probe(dev, PTR_ERR(mipi_dsi->phy),
+ "failed to get mipi dphy\n");
+
+ mipi_dsi->bit_clk = devm_clk_get_enabled(dev, "bit");
+ if (IS_ERR(mipi_dsi->bit_clk)) {
+ int ret = PTR_ERR(mipi_dsi->bit_clk);
+
+ /* TOFIX GP0 on some platforms fails to lock in early boot, defer probe */
+ if (ret == -EIO)
+ ret = -EPROBE_DEFER;
+
+ return dev_err_probe(dev, ret, "Unable to get enabled bit_clk\n");
+ }
+
+ mipi_dsi->px_clk = devm_clk_get_enabled(dev, "px");
+ if (IS_ERR(mipi_dsi->px_clk))
+ return dev_err_probe(dev, PTR_ERR(mipi_dsi->px_clk),
+ "Unable to get enabled px_clk\n");
+
+ /*
+ * We use a TOP reset signal because the APB reset signal
+ * is handled by the TOP control registers.
+ */
+ mipi_dsi->top_rst = devm_reset_control_get_exclusive(dev, "top");
+ if (IS_ERR(mipi_dsi->top_rst))
+ return dev_err_probe(dev, PTR_ERR(mipi_dsi->top_rst),
+ "Unable to get reset control\n");
+
+ reset_control_assert(mipi_dsi->top_rst);
+ usleep_range(10, 20);
+ reset_control_deassert(mipi_dsi->top_rst);
+
+ /* MIPI DSI Controller */
+
+ mipi_dsi->dev = dev;
+ mipi_dsi->pdata.base = mipi_dsi->base;
+ mipi_dsi->pdata.max_data_lanes = 4;
+ mipi_dsi->pdata.phy_ops = &meson_dw_mipi_dsi_phy_ops;
+ mipi_dsi->pdata.host_ops = &meson_dw_mipi_dsi_host_ops;
+ mipi_dsi->pdata.priv_data = mipi_dsi;
+ platform_set_drvdata(pdev, mipi_dsi);
+
+ mipi_dsi->dmd = dw_mipi_dsi_probe(pdev, &mipi_dsi->pdata);
+ if (IS_ERR(mipi_dsi->dmd))
+ return dev_err_probe(dev, PTR_ERR(mipi_dsi->dmd),
+ "Failed to probe dw_mipi_dsi\n");
+
+ return 0;
+}
+
+static int meson_dw_mipi_dsi_remove(struct platform_device *pdev)
+{
+ struct meson_dw_mipi_dsi *mipi_dsi = platform_get_drvdata(pdev);
+
+ dw_mipi_dsi_remove(mipi_dsi->dmd);
+
+ return 0;
+}
+
+static const struct of_device_id meson_dw_mipi_dsi_of_table[] = {
+ { .compatible = "amlogic,meson-g12a-dw-mipi-dsi", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, meson_dw_mipi_dsi_of_table);
+
+static struct platform_driver meson_dw_mipi_dsi_platform_driver = {
+ .probe = meson_dw_mipi_dsi_probe,
+ .remove = meson_dw_mipi_dsi_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = meson_dw_mipi_dsi_of_table,
+ },
+};
+module_platform_driver(meson_dw_mipi_dsi_platform_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h
new file mode 100644
index 000000000000..e1bd6b85d6a3
--- /dev/null
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __MESON_DW_MIPI_DSI_H
+#define __MESON_DW_MIPI_DSI_H
+
+/* Top-level registers */
+/* [31: 4] Reserved. Default 0.
+ * [3] RW timing_rst_n: Default 1.
+ * 1=Assert SW reset of timing feature. 0=Release reset.
+ * [2] RW dpi_rst_n: Default 1.
+ * 1=Assert SW reset on mipi_dsi_host_dpi block. 0=Release reset.
+ * [1] RW intr_rst_n: Default 1.
+ * 1=Assert SW reset on mipi_dsi_host_intr block. 0=Release reset.
+ * [0] RW dwc_rst_n: Default 1.
+ * 1=Assert SW reset on IP core. 0=Release reset.
+ */
+#define MIPI_DSI_TOP_SW_RESET 0x3c0
+
+#define MIPI_DSI_TOP_SW_RESET_DWC BIT(0)
+#define MIPI_DSI_TOP_SW_RESET_INTR BIT(1)
+#define MIPI_DSI_TOP_SW_RESET_DPI BIT(2)
+#define MIPI_DSI_TOP_SW_RESET_TIMING BIT(3)
+
+/* [31: 5] Reserved. Default 0.
+ * [4] RW manual_edpihalt: Default 0.
+ * 1=Manual suspend VencL; 0=do not suspend VencL.
+ * [3] RW auto_edpihalt_en: Default 0.
+ * 1=Enable IP's edpihalt signal to suspend VencL;
+ * 0=IP's edpihalt signal does not affect VencL.
+ * [2] RW clock_freerun: Apply to auto-clock gate only. Default 0.
+ * 0=Default, use auto-clock gating to save power;
+ * 1=use free-run clock, disable auto-clock gating, for debug mode.
+ * [1] RW enable_pixclk: A manual clock gate option, due to DWC IP does not
+ * have auto-clock gating. 1=Enable pixclk. Default 0.
+ * [0] RW enable_sysclk: A manual clock gate option, due to DWC IP does not
+ * have auto-clock gating. 1=Enable sysclk. Default 0.
+ */
+#define MIPI_DSI_TOP_CLK_CNTL 0x3c4
+
+#define MIPI_DSI_TOP_CLK_SYSCLK_EN BIT(0)
+#define MIPI_DSI_TOP_CLK_PIXCLK_EN BIT(1)
+
+/* [31:24] Reserved. Default 0.
+ * [23:20] RW dpi_color_mode: Define DPI pixel format. Default 0.
+ * 0=16-bit RGB565 config 1;
+ * 1=16-bit RGB565 config 2;
+ * 2=16-bit RGB565 config 3;
+ * 3=18-bit RGB666 config 1;
+ * 4=18-bit RGB666 config 2;
+ * 5=24-bit RGB888;
+ * 6=20-bit YCbCr 4:2:2;
+ * 7=24-bit YCbCr 4:2:2;
+ * 8=16-bit YCbCr 4:2:2;
+ * 9=30-bit RGB;
+ * 10=36-bit RGB;
+ * 11=12-bit YCbCr 4:2:0.
+ * [19] Reserved. Default 0.
+ * [18:16] RW in_color_mode: Define VENC data width. Default 0.
+ * 0=30-bit pixel;
+ * 1=24-bit pixel;
+ * 2=18-bit pixel, RGB666;
+ * 3=16-bit pixel, RGB565.
+ * [15:14] RW chroma_subsample: Define method of chroma subsampling. Default 0.
+ * Applicable to YUV422 or YUV420 only.
+ * 0=Use even pixel's chroma;
+ * 1=Use odd pixel's chroma;
+ * 2=Use averaged value between even and odd pair.
+ * [13:12] RW comp2_sel: Select which component to be Cr or B: Default 2.
+ * 0=comp0; 1=comp1; 2=comp2.
+ * [11:10] RW comp1_sel: Select which component to be Cb or G: Default 1.
+ * 0=comp0; 1=comp1; 2=comp2.
+ * [9: 8] RW comp0_sel: Select which component to be Y or R: Default 0.
+ * 0=comp0; 1=comp1; 2=comp2.
+ * [7] Reserved. Default 0.
+ * [6] RW de_pol: Default 0.
+ * If DE input is active low, set to 1 to invert to active high.
+ * [5] RW hsync_pol: Default 0.
+ * If HS input is active low, set to 1 to invert to active high.
+ * [4] RW vsync_pol: Default 0.
+ * If VS input is active low, set to 1 to invert to active high.
+ * [3] RW dpicolorm: Signal to IP. Default 0.
+ * [2] RW dpishutdn: Signal to IP. Default 0.
+ * [1] Reserved. Default 0.
+ * [0] Reserved. Default 0.
+ */
+#define MIPI_DSI_TOP_CNTL 0x3c8
+
+/* VENC data width */
+#define VENC_IN_COLOR_30B 0x0
+#define VENC_IN_COLOR_24B 0x1
+#define VENC_IN_COLOR_18B 0x2
+#define VENC_IN_COLOR_16B 0x3
+
+/* DPI pixel format */
+#define DPI_COLOR_16BIT_CFG_1 0
+#define DPI_COLOR_16BIT_CFG_2 1
+#define DPI_COLOR_16BIT_CFG_3 2
+#define DPI_COLOR_18BIT_CFG_1 3
+#define DPI_COLOR_18BIT_CFG_2 4
+#define DPI_COLOR_24BIT 5
+#define DPI_COLOR_20BIT_YCBCR_422 6
+#define DPI_COLOR_24BIT_YCBCR_422 7
+#define DPI_COLOR_16BIT_YCBCR_422 8
+#define DPI_COLOR_30BIT 9
+#define DPI_COLOR_36BIT 10
+#define DPI_COLOR_12BIT_YCBCR_420 11
+
+#define MIPI_DSI_TOP_DPI_COLOR_MODE GENMASK(23, 20)
+#define MIPI_DSI_TOP_IN_COLOR_MODE GENMASK(18, 16)
+#define MIPI_DSI_TOP_CHROMA_SUBSAMPLE GENMASK(15, 14)
+#define MIPI_DSI_TOP_COMP2_SEL GENMASK(13, 12)
+#define MIPI_DSI_TOP_COMP1_SEL GENMASK(11, 10)
+#define MIPI_DSI_TOP_COMP0_SEL GENMASK(9, 8)
+#define MIPI_DSI_TOP_DE_INVERT BIT(6)
+#define MIPI_DSI_TOP_HSYNC_INVERT BIT(5)
+#define MIPI_DSI_TOP_VSYNC_INVERT BIT(4)
+#define MIPI_DSI_TOP_DPICOLORM BIT(3)
+#define MIPI_DSI_TOP_DPISHUTDN BIT(2)
+
+#define MIPI_DSI_TOP_SUSPEND_CNTL 0x3cc
+#define MIPI_DSI_TOP_SUSPEND_LINE 0x3d0
+#define MIPI_DSI_TOP_SUSPEND_PIX 0x3d4
+#define MIPI_DSI_TOP_MEAS_CNTL 0x3d8
+/* [0] R stat_edpihalt: edpihalt signal from IP. Default 0. */
+#define MIPI_DSI_TOP_STAT 0x3dc
+#define MIPI_DSI_TOP_MEAS_STAT_TE0 0x3e0
+#define MIPI_DSI_TOP_MEAS_STAT_TE1 0x3e4
+#define MIPI_DSI_TOP_MEAS_STAT_VS0 0x3e8
+#define MIPI_DSI_TOP_MEAS_STAT_VS1 0x3ec
+/* [31:16] RW intr_stat/clr. Default 0.
+ * For each bit, read as this interrupt level status,
+ * write 1 to clear.
+ * [31:22] Reserved
+ * [ 21] stat/clr of eof interrupt
+ * [ 21] vde_fall interrupt
+ * [ 19] stat/clr of de_rise interrupt
+ * [ 18] stat/clr of vs_fall interrupt
+ * [ 17] stat/clr of vs_rise interrupt
+ * [ 16] stat/clr of dwc_edpite interrupt
+ * [15: 0] RW intr_enable. Default 0.
+ * For each bit, 1=enable this interrupt, 0=disable.
+ * [15: 6] Reserved
+ * [ 5] eof interrupt
+ * [ 4] de_fall interrupt
+ * [ 3] de_rise interrupt
+ * [ 2] vs_fall interrupt
+ * [ 1] vs_rise interrupt
+ * [ 0] dwc_edpite interrupt
+ */
+#define MIPI_DSI_TOP_INTR_CNTL_STAT 0x3f0
+// 31: 2 Reserved. Default 0.
+// 1: 0 RW mem_pd. Default 3.
+#define MIPI_DSI_TOP_MEM_PD 0x3f4
+
+#endif /* __MESON_DW_MIPI_DSI_H */
generated by cgit (git 2.34.1) at 2024-05-27 06:44:42 +0000