diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd index 0088aba4caa8..fc82aa4e54b0 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd +++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd @@ -23,3 +23,65 @@ Description: Reading this attribute gives the state of the DbC. It can be one of the following states: disabled, enabled, initialized, connected, configured and stalled. + +What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_idVendor +Date: March 2023 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + This dbc_idVendor attribute lets us change the idVendor field + presented in the USB device descriptor by this xhci debug + device. + Value can only be changed while debug capability (DbC) is in + disabled state to prevent USB device descriptor change while + connected to a USB host. + The default value is 0x1d6b (Linux Foundation). + It can be any 16-bit integer. + +What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_idProduct +Date: March 2023 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + This dbc_idProduct attribute lets us change the idProduct field + presented in the USB device descriptor by this xhci debug + device. + Value can only be changed while debug capability (DbC) is in + disabled state to prevent USB device descriptor change while + connected to a USB host. + The default value is 0x0010. It can be any 16-bit integer. + +What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_bcdDevice +Date: March 2023 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + This dbc_bcdDevice attribute lets us change the bcdDevice field + presented in the USB device descriptor by this xhci debug + device. + Value can only be changed while debug capability (DbC) is in + disabled state to prevent USB device descriptor change while + connected to a USB host. + The default value is 0x0010. (device rev 0.10) + It can be any 16-bit integer. + +What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_bInterfaceProtocol +Date: March 2023 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + This attribute lets us change the bInterfaceProtocol field + presented in the USB Interface descriptor by the xhci debug + device. + Value can only be changed while debug capability (DbC) is in + disabled state to prevent USB descriptor change while + connected to a USB host. + The default value is 1 (GNU Remote Debug command). + Other permissible value is 0 which is for vendor defined debug + target. + +What: /sys/bus/pci/drivers/xhci_hcd/.../dbc_poll_interval_ms +Date: February 2024 +Contact: Mathias Nyman <mathias.nyman@linux.intel.com> +Description: + This attribute adjust the polling interval used to check for + DbC events. Unit is milliseconds. Accepted values range from 0 + up to 5000. The default value is 64 ms. + This polling interval is used while DbC is enabled but has no + active data transfers. |