diff options
Diffstat (limited to 'Documentation/ABI')
| -rw-r--r-- | Documentation/ABI/stable/sysfs-bus-usb | 14 | ||||
| -rw-r--r-- | Documentation/ABI/testing/ima_policy | 4 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 95 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs | 11 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-platform | 20 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-usb-lvstest | 47 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-iommu | 17 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-iommu-amd-iommu | 14 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-iommu-intel-iommu | 32 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-mei | 16 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-genwqe | 9 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-ts5500 | 7 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-tty | 16 |
13 files changed, 294 insertions, 8 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb index a6b685724740..e2bc700a6f9c 100644 --- a/Documentation/ABI/stable/sysfs-bus-usb +++ b/Documentation/ABI/stable/sysfs-bus-usb @@ -3,13 +3,13 @@ Date: May 2007 KernelVersion: 2.6.23 Contact: Alan Stern <stern@rowland.harvard.edu> Description: - If CONFIG_USB_PERSIST is set, then each USB device directory - will contain a file named power/persist. The file holds a - boolean value (0 or 1) indicating whether or not the - "USB-Persist" facility is enabled for the device. Since the - facility is inherently dangerous, it is disabled by default - for all devices except hubs. For more information, see - Documentation/usb/persist.txt. + USB device directories can contain a file named power/persist. + The file holds a boolean value (0 or 1) indicating whether or + not the "USB-Persist" facility is enabled for the device. For + hubs this facility is always enabled and their device + directories will not contain this file. + + For more information, see Documentation/usb/persist.txt. What: /sys/bus/usb/devices/.../power/autosuspend Date: March 2007 diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 4c3efe434806..d0d0c578324c 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -26,6 +26,7 @@ Description: option: [[appraise_type=]] [permit_directio] base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK] + [FIRMWARE_CHECK] mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] fsmagic:= hex value fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6) @@ -57,7 +58,8 @@ Description: measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 - measure func=MODULE_CHECK uid=0 + measure func=MODULE_CHECK + measure func=FIRMWARE_CHECK appraise fowner=0 The default policy measures all executables in bprm_check, diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index a9757dcf2e81..d760b0224ef7 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -260,6 +260,10 @@ What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale KernelVersion: 2.6.35 @@ -447,6 +451,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en @@ -492,6 +504,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en @@ -538,6 +558,14 @@ What: /sys/.../events/in_magn_y_raw_thresh_rising_value What: /sys/.../events/in_magn_y_raw_thresh_falling_value What: /sys/.../events/in_magn_z_raw_thresh_rising_value What: /sys/.../events/in_magn_z_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value What: /sys/.../events/in_voltageY_raw_thresh_rising_value @@ -588,6 +616,18 @@ What: /sys/.../events/in_magn_y_thresh_either_hysteresis What: /sys/.../events/in_magn_z_thresh_rising_hysteresis What: /sys/.../events/in_magn_z_thresh_falling_hysteresis What: /sys/.../events/in_magn_z_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis What: /sys/.../events/in_voltageY_thresh_rising_hysteresis What: /sys/.../events/in_voltageY_thresh_falling_hysteresis What: /sys/.../events/in_voltageY_thresh_either_hysteresis @@ -635,6 +675,14 @@ What: /sys/.../events/in_magn_y_raw_roc_rising_value What: /sys/.../events/in_magn_y_raw_roc_falling_value What: /sys/.../events/in_magn_z_raw_roc_rising_value What: /sys/.../events/in_magn_z_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value What: /sys/.../events/in_voltageY_raw_roc_rising_value @@ -690,6 +738,22 @@ What: /sys/.../events/in_magn_z_thresh_rising_period What: /sys/.../events/in_magn_z_thresh_falling_period What: /sys/.../events/in_magn_z_roc_rising_period What: /sys/.../events/in_magn_z_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period What: /sys/.../events/in_voltageY_supply_thresh_rising_period What: /sys/.../events/in_voltageY_supply_thresh_falling_period What: /sys/.../events/in_voltageY_supply_roc_rising_period @@ -787,6 +851,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en @@ -853,6 +921,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index @@ -895,6 +967,19 @@ Description: on-chip EEPROM. After power-up or chip reset the device will automatically load the saved configuration. +What: /sys/.../iio:deviceX/in_proximity_raw +What: /sys/.../iio:deviceX/in_proximity_input +What: /sys/.../iio:deviceX/in_proximityY_raw +KernelVersion: 3.4 +Contact: linux-iio@vger.kernel.org +Description: + Proximity measurement indicating that some + object is near the sensor, usually be observing + reflectivity of infrared or ultrasound emitted. + Often these sensors are unit less and as such conversion + to SI units is not possible. Where it is, the units should + be meters. + What: /sys/.../iio:deviceX/in_illuminanceY_input What: /sys/.../iio:deviceX/in_illuminanceY_raw What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw @@ -933,3 +1018,13 @@ Description: x y z w. Here x, y, and z component represents the axis about which a rotation will occur and w component represents the amount of rotation. + +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw +KernelVersion: 3.15 +Contact: linux-iio@vger.kernel.org +Description: + Raw value of rotation from true/magnetic north measured with + or without compensation from tilt sensors. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs new file mode 100644 index 000000000000..5235e6c749ab --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs @@ -0,0 +1,11 @@ +What: /sys/bus/iio/devices/triggerX/trigger_now +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + This file is provided by the iio-trig-sysfs stand-alone trigger + driver. Writing this file with any value triggers an event + driven driver, associated with this trigger, to capture data + into an in kernel buffer. This approach can be valuable during + automated testing or in situations, where other trigger methods + are not applicable. For example no RTC or spare GPIOs. + X is the IIO index of the trigger. diff --git a/Documentation/ABI/testing/sysfs-bus-platform b/Documentation/ABI/testing/sysfs-bus-platform new file mode 100644 index 000000000000..5172a6124b27 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-platform @@ -0,0 +1,20 @@ +What: /sys/bus/platform/devices/.../driver_override +Date: April 2014 +Contact: Kim Phillips <kim.phillips@freescale.com> +Description: + This file allows the driver for a device to be specified which + will override standard OF, ACPI, ID table, and name matching. + When specified, only a driver with a name matching the value + written to driver_override will have an opportunity to bind + to the device. The override is specified by writing a string + to the driver_override file (echo vfio-platform > \ + driver_override) and may be cleared with an empty string + (echo > driver_override). This returns the device to standard + matching rules binding. Writing to driver_override does not + automatically unbind the device from its current driver or make + any attempt to automatically load the specified driver. If no + driver with a matching name is currently loaded in the kernel, + the device will not bind to any driver. This also allows + devices to opt-out of driver binding using a driver_override + name such as "none". Only a single driver may be specified in + the override, there is no support for parsing delimiters. diff --git a/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/Documentation/ABI/testing/sysfs-bus-usb-lvstest new file mode 100644 index 000000000000..aae68fc2d842 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-usb-lvstest @@ -0,0 +1,47 @@ +Link Layer Validation Device is a standard device for testing of Super +Speed Link Layer tests. These nodes are available in sysfs only when lvs +driver is bound with root hub device. + +What: /sys/bus/usb/devices/.../get_dev_desc +Date: March 2014 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + Write to this node to issue "Get Device Descriptor" + for Link Layer Validation device. It is needed for TD.7.06. + +What: /sys/bus/usb/devices/.../u1_timeout +Date: March 2014 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + Set "U1 timeout" for the downstream port where Link Layer + Validation device is connected. Timeout value must be between 0 + and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21. + +What: /sys/bus/usb/devices/.../u2_timeout +Date: March 2014 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + Set "U2 timeout" for the downstream port where Link Layer + Validation device is connected. Timeout value must be between 0 + and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21. + +What: /sys/bus/usb/devices/.../hot_reset +Date: March 2014 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + Write to this node to issue "Reset" for Link Layer Validation + device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35. + +What: /sys/bus/usb/devices/.../u3_entry +Date: March 2014 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + Write to this node to issue "U3 entry" for Link Layer + Validation device. It is needed for TD.7.35 and TD.7.36. + +What: /sys/bus/usb/devices/.../u3_exit +Date: March 2014 +Contact: Pratyush Anand <pratyush.anand@st.com> +Description: + Write to this node to issue "U3 exit" for Link Layer + Validation device. It is needed for TD.7.36. diff --git a/Documentation/ABI/testing/sysfs-class-iommu b/Documentation/ABI/testing/sysfs-class-iommu new file mode 100644 index 000000000000..6d0a1b4be82d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu @@ -0,0 +1,17 @@ +What: /sys/class/iommu/<iommu>/devices/ +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + IOMMU drivers are able to link devices managed by a + given IOMMU here to allow association of IOMMU to + device. + +What: /sys/devices/.../iommu +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + IOMMU drivers are able to link the IOMMU for a + given device here to allow association of device to + IOMMU. diff --git a/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu b/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu new file mode 100644 index 000000000000..d6ba8e8a4a97 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu @@ -0,0 +1,14 @@ +What: /sys/class/iommu/<iommu>/amd-iommu/cap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + IOMMU capability header as documented in the AMD IOMMU + specification. Format: %x + +What: /sys/class/iommu/<iommu>/amd-iommu/features +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + Extended features of the IOMMU. Format: %llx diff --git a/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu b/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu new file mode 100644 index 000000000000..258cc246d98e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu @@ -0,0 +1,32 @@ +What: /sys/class/iommu/<iommu>/intel-iommu/address +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + Physical address of the VT-d DRHD for this IOMMU. + Format: %llx. This allows association of a sysfs + intel-iommu with a DMAR DRHD table entry. + +What: /sys/class/iommu/<iommu>/intel-iommu/cap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + The cached hardware capability register value + of this DRHD unit. Format: %llx. + +What: /sys/class/iommu/<iommu>/intel-iommu/ecap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + The cached hardware extended capability register + value of this DRHD unit. Format: %llx. + +What: /sys/class/iommu/<iommu>/intel-iommu/version +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + The architecture version as reported from the + VT-d VER_REG. Format: %d:%d, major:minor diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei new file mode 100644 index 000000000000..0ec8b8178c41 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-mei @@ -0,0 +1,16 @@ +What: /sys/class/mei/ +Date: May 2014 +KernelVersion: 3.17 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: + The mei/ class sub-directory belongs to mei device class + + +What: /sys/class/mei/meiN/ +Date: May 2014 +KernelVersion: 3.17 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: + The /sys/class/mei/meiN directory is created for + each probed mei device + diff --git a/Documentation/ABI/testing/sysfs-driver-genwqe b/Documentation/ABI/testing/sysfs-driver-genwqe index 1870737a1f5e..64ac6d567c4b 100644 --- a/Documentation/ABI/testing/sysfs-driver-genwqe +++ b/Documentation/ABI/testing/sysfs-driver-genwqe @@ -25,6 +25,15 @@ Date: Oct 2013 Contact: haver@linux.vnet.ibm.com Description: Interface to set the next bitstream to be used. +What: /sys/class/genwqe/genwqe<n>_card/reload_bitstream +Date: May 2014 +Contact: klebers@linux.vnet.ibm.com +Description: Interface to trigger a PCIe card reset to reload the bitstream. + sudo sh -c 'echo 1 > \ + /sys/class/genwqe/genwqe0_card/reload_bitstream' + If successfully, the card will come back with the bitstream set + on 'next_bitstream'. + What: /sys/class/genwqe/genwqe<n>_card/tempsens Date: Oct 2013 Contact: haver@linux.vnet.ibm.com diff --git a/Documentation/ABI/testing/sysfs-platform-ts5500 b/Documentation/ABI/testing/sysfs-platform-ts5500 index c88375a537a1..e685957caa12 100644 --- a/Documentation/ABI/testing/sysfs-platform-ts5500 +++ b/Documentation/ABI/testing/sysfs-platform-ts5500 @@ -30,6 +30,13 @@ Description: the corresponding bit is set. For instance, 0x0e means jumpers 2, 3 and 4 are set. +What: /sys/devices/platform/ts5500/name +Date: July 2014 +KernelVersion: 3.16 +Contact: "Savoir-faire Linux Inc." <kernel@savoirfairelinux.com> +Description: + Model name of the TS board, e.g. "TS-5500". + What: /sys/devices/platform/ts5500/rs485 Date: January 2013 KernelVersion: 3.7 diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty index ad22fb0ee765..9eb3c2b6b040 100644 --- a/Documentation/ABI/testing/sysfs-tty +++ b/Documentation/ABI/testing/sysfs-tty @@ -138,3 +138,19 @@ Description: These sysfs values expose the TIOCGSERIAL interface via sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS0/rx_trig_bytes +Date: May 2014 +Contact: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> +Description: + Shows current RX interrupt trigger bytes or sets the + user specified value to change it for the FIFO buffer. + Users can show or set this value regardless of opening the + serial device file or not. + + The RX trigger can be set one of four kinds of values for UART + serials. When users input a meaning less value to this I/F, + the RX trigger is changed to the nearest lower value for the + device specification. For example, when user sets 7bytes on + 16550A, which has 1/4/8/14 bytes trigger, the RX trigger is + automatically changed to 4 bytes. |