diff options
Diffstat (limited to 'Documentation/ABI')
| -rw-r--r-- | Documentation/ABI/obsolete/sysfs-class-net-batman-adv | 32 | ||||
| -rw-r--r-- | Documentation/ABI/obsolete/sysfs-class-net-mesh | 110 | ||||
| -rw-r--r-- | Documentation/ABI/testing/configfs-usb-gadget-ecm | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/procfs-attr-current | 20 | ||||
| -rw-r--r-- | Documentation/ABI/testing/procfs-attr-exec | 20 | ||||
| -rw-r--r-- | Documentation/ABI/testing/procfs-attr-prev | 19 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 10 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360 | 78 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-thunderbolt | 28 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-typec | 142 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-memory | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-w1_therm | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-firmware-sgi_uv | 160 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-fs-ext4 | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-kernel-btf | 8 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-module | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-renesas_usb3 | 2 |
17 files changed, 443 insertions, 196 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-class-net-batman-adv b/Documentation/ABI/obsolete/sysfs-class-net-batman-adv deleted file mode 100644 index 5bdbc8d40256..000000000000 --- a/Documentation/ABI/obsolete/sysfs-class-net-batman-adv +++ /dev/null @@ -1,32 +0,0 @@ -This ABI is deprecated and will be removed after 2021. It is -replaced with the batadv generic netlink family. - -What: /sys/class/net/<iface>/batman-adv/elp_interval -Date: Feb 2014 -Contact: Linus Lüssing <linus.luessing@web.de> -Description: - Defines the interval in milliseconds in which batman - emits probing packets for neighbor sensing (ELP). - -What: /sys/class/net/<iface>/batman-adv/iface_status -Date: May 2010 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - Indicates the status of <iface> as it is seen by batman. - -What: /sys/class/net/<iface>/batman-adv/mesh_iface -Date: May 2010 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - The /sys/class/net/<iface>/batman-adv/mesh_iface file - displays the batman mesh interface this <iface> - currently is associated with. - -What: /sys/class/net/<iface>/batman-adv/throughput_override -Date: Feb 2014 -Contact: Antonio Quartulli <a@unstable.cc> -description: - Defines the throughput value to be used by B.A.T.M.A.N. V - when estimating the link throughput using this interface. - If the value is set to 0 then batman-adv will try to - estimate the throughput by itself. diff --git a/Documentation/ABI/obsolete/sysfs-class-net-mesh b/Documentation/ABI/obsolete/sysfs-class-net-mesh deleted file mode 100644 index 04c1a2932507..000000000000 --- a/Documentation/ABI/obsolete/sysfs-class-net-mesh +++ /dev/null @@ -1,110 +0,0 @@ -This ABI is deprecated and will be removed after 2021. It is -replaced with the batadv generic netlink family. - -What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms -Date: May 2010 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - Indicates whether the batman protocol messages of the - mesh <mesh_iface> shall be aggregated or not. - -What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation -Date: May 2011 -Contact: Antonio Quartulli <a@unstable.cc> -Description: - Indicates whether the data traffic going from a - wireless client to another wireless client will be - silently dropped. <vlan_subdir> is empty when referring - to the untagged lan. - -What: /sys/class/net/<mesh_iface>/mesh/bonding -Date: June 2010 -Contact: Simon Wunderlich <sw@simonwunderlich.de> -Description: - Indicates whether the data traffic going through the - mesh will be sent using multiple interfaces at the - same time (if available). - -What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance -Date: November 2011 -Contact: Simon Wunderlich <sw@simonwunderlich.de> -Description: - Indicates whether the bridge loop avoidance feature - is enabled. This feature detects and avoids loops - between the mesh and devices bridged with the soft - interface <mesh_iface>. - -What: /sys/class/net/<mesh_iface>/mesh/fragmentation -Date: October 2010 -Contact: Andreas Langer <an.langer@gmx.de> -Description: - Indicates whether the data traffic going through the - mesh will be fragmented or silently discarded if the - packet size exceeds the outgoing interface MTU. - -What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth -Date: October 2010 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - Defines the bandwidth which is propagated by this - node if gw_mode was set to 'server'. - -What: /sys/class/net/<mesh_iface>/mesh/gw_mode -Date: October 2010 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - Defines the state of the gateway features. Can be - either 'off', 'client' or 'server'. - -What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class -Date: October 2010 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - Defines the selection criteria this node will use - to choose a gateway if gw_mode was set to 'client'. - -What: /sys/class/net/<mesh_iface>/mesh/hop_penalty -Date: Oct 2010 -Contact: Linus Lüssing <linus.luessing@web.de> -Description: - Defines the penalty which will be applied to an - originator message's tq-field on every hop. - -What: /sys/class/net/<mesh_iface>/mesh/isolation_mark -Date: Nov 2013 -Contact: Antonio Quartulli <a@unstable.cc> -Description: - Defines the isolation mark (and its bitmask) which - is used to classify clients as "isolated" by the - Extended Isolation feature. - -What: /sys/class/net/<mesh_iface>/mesh/multicast_mode -Date: Feb 2014 -Contact: Linus Lüssing <linus.luessing@web.de> -Description: - Indicates whether multicast optimizations are enabled - or disabled. If set to zero then all nodes in the - mesh are going to use classic flooding for any - multicast packet with no optimizations. - -What: /sys/class/net/<mesh_iface>/mesh/network_coding -Date: Nov 2012 -Contact: Martin Hundeboll <martin@hundeboll.net> -Description: - Controls whether Network Coding (using some magic - to send fewer wifi packets but still the same - content) is enabled or not. - -What: /sys/class/net/<mesh_iface>/mesh/orig_interval -Date: May 2010 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - Defines the interval in milliseconds in which batman - sends its protocol messages. - -What: /sys/class/net/<mesh_iface>/mesh/routing_algo -Date: Dec 2011 -Contact: Marek Lindner <mareklindner@neomailbox.ch> -Description: - Defines the routing procotol this mesh instance - uses to find the optimal paths through the mesh. diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ecm b/Documentation/ABI/testing/configfs-usb-gadget-ecm index 272bc1e4ce2e..732101ca9d0b 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-ecm +++ b/Documentation/ABI/testing/configfs-usb-gadget-ecm @@ -7,7 +7,7 @@ Description: ifname - network device interface name associated with this function instance - qmult + qmult - queue length multiplier for high and super speed host_addr diff --git a/Documentation/ABI/testing/procfs-attr-current b/Documentation/ABI/testing/procfs-attr-current new file mode 100644 index 000000000000..198b9fe1c8e8 --- /dev/null +++ b/Documentation/ABI/testing/procfs-attr-current @@ -0,0 +1,20 @@ +What: /proc/*/attr/current +Contact: linux-security-module@vger.kernel.org, + selinux@vger.kernel.org, + apparmor@lists.ubuntu.com +Description: The current security information used by a Linux + security module (LSM) that is active on the system. + The details of permissions required to read from + this interface and hence obtain the security state + of the task identified is LSM dependent. + A process cannot write to this interface unless it + refers to itself. + The other details of permissions required to write to + this interface and hence change the security state of + the task identified are LSM dependent. + The format of the data used by this interface is LSM + dependent. + SELinux, Smack and AppArmor provide this interface. +Users: SELinux user-space + Smack user-space + AppArmor user-space diff --git a/Documentation/ABI/testing/procfs-attr-exec b/Documentation/ABI/testing/procfs-attr-exec new file mode 100644 index 000000000000..34593866a7ab --- /dev/null +++ b/Documentation/ABI/testing/procfs-attr-exec @@ -0,0 +1,20 @@ +What: /proc/*/attr/exec +Contact: linux-security-module@vger.kernel.org, + selinux@vger.kernel.org, + apparmor@lists.ubuntu.com +Description: The security information to be used on the process + by a Linux security module (LSM) active on the system + after a subsequent exec() call. + The details of permissions required to read from + this interface and hence obtain the security state + of the task identified is LSM dependent. + A process cannot write to this interface unless it + refers to itself. + The other details of permissions required to write to + this interface and hence change the security state of + the task identified are LSM dependent. + The format of the data used by this interface is LSM + dependent. + SELinux and AppArmor provide this interface. +Users: SELinux user-space + AppArmor user-space diff --git a/Documentation/ABI/testing/procfs-attr-prev b/Documentation/ABI/testing/procfs-attr-prev new file mode 100644 index 000000000000..f990b3595839 --- /dev/null +++ b/Documentation/ABI/testing/procfs-attr-prev @@ -0,0 +1,19 @@ +What: /proc/*/attr/prev +Contact: linux-security-module@vger.kernel.org, + selinux@vger.kernel.org, + apparmor@lists.ubuntu.com +Description: The security information used on the process by + a Linux security module (LSM) active on the system + prior to the most recent exec() call. + The details of permissions required to read from + this interface is LSM dependent. + A process cannot write to this interface unless it + refers to itself. + The other details of permissions required to write to + this interface are LSM dependent. + The format of the data used by this interface is LSM + dependent. + SELinux and AppArmor provide this interface. +Users: SELinux user-space + AppArmor user-space + diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index df42bed09f25..35289d47d6cb 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -1743,6 +1743,16 @@ Description: Raw counter device counters direction for channel Y. +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_label +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_label +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Optional symbolic label to a device channel. + If a label is defined for this channel add that to the channel + specific attributes. This is useful for userspace to be able to + better identify an individual channel. + What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw KernelVersion: 4.18 Contact: linux-iio@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360 new file mode 100644 index 000000000000..e5a7b1c7cca3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mt6360 @@ -0,0 +1,78 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_voltage0_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 USBID ADC which connected to connector ID pin. + Calculating with scale and offset returns voltage in uV + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage1_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 VBUS ADC with lower accuracy(+-75mA) + higher measure range(1~22mV) + Calculating with scale and offset returns voltage in uV + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage2_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 VBUS ADC with higher accuracy(+-30mA) + lower measure range(1~9.76V) + Calculating with scale and offset returns voltage in uV + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage3_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 VSYS ADC + Calculating with scale and offset returns voltage in uV + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage4_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 VBAT ADC + Calculating with scale and offset returns voltage in uV + +What: /sys/bus/iio/devices/iio:deviceX/in_current5_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 IBUS ADC + Calculating with scale and offset returns voltage in uA + +What: /sys/bus/iio/devices/iio:deviceX/in_current6_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 IBAT ADC + Calculating with scale and offset returns voltage in uA + +What: /sys/bus/iio/devices/iio:deviceX/in_current7_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 CHG_VDDP ADC + Calculating with scale and offset returns voltage in uV + +What: /sys/bus/iio/devices/iio:deviceX/in_temp8_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 IC junction temperature + Calculating with scale and offset returns temperature in degree + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage9_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 VREF_TS ADC + Calculating with scale and offset returns voltage in uV + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage10_raw +KernelVersion: 5.8.0 +Contact: gene_chen@richtek.com +Description: + Indicated MT6360 TS ADC + Calculating with scale and offset returns voltage in uV diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 0b4ab9e4b8f4..a91b4b24496e 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -1,3 +1,31 @@ +What: /sys/bus/thunderbolt/devices/<xdomain>/rx_speed +Date: Feb 2021 +KernelVersion: 5.11 +Contact: Isaac Hazan <isaac.hazan@intel.com> +Description: This attribute reports the XDomain RX speed per lane. + All RX lanes run at the same speed. + +What: /sys/bus/thunderbolt/devices/<xdomain>/rx_lanes +Date: Feb 2021 +KernelVersion: 5.11 +Contact: Isaac Hazan <isaac.hazan@intel.com> +Description: This attribute reports the number of RX lanes the XDomain + is using simultaneously through its upstream port. + +What: /sys/bus/thunderbolt/devices/<xdomain>/tx_speed +Date: Feb 2021 +KernelVersion: 5.11 +Contact: Isaac Hazan <isaac.hazan@intel.com> +Description: This attribute reports the XDomain TX speed per lane. + All TX lanes run at the same speed. + +What: /sys/bus/thunderbolt/devices/<xdomain>/tx_lanes +Date: Feb 2021 +KernelVersion: 5.11 +Contact: Isaac Hazan <isaac.hazan@intel.com> +Description: This attribute reports number of TX lanes the XDomain + is using simultaneously through its upstream port. + What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl Date: Jun 2018 KernelVersion: 4.17 diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec index b7794e02ad20..8eab41e79ce6 100644 --- a/Documentation/ABI/testing/sysfs-class-typec +++ b/Documentation/ABI/testing/sysfs-class-typec @@ -139,6 +139,49 @@ Description: Shows if the partner supports USB Power Delivery communication: Valid values: yes, no +What: /sys/class/typec/<port>-partner/number_of_alternate_modes +Date: November 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + Shows the number of alternate modes which are advertised by the partner + during Power Delivery discovery. This file remains hidden until a value + greater than or equal to 0 is set by Type C port driver. + +What: /sys/class/typec/<port>-partner/type +Date: December 2020 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: USB Power Delivery Specification defines a set of product types + for the partner devices. This file will show the product type of + the partner if it is known. Dual-role capable partners will have + both UFP and DFP product types defined, but only one that + matches the current role will be active at the time. If the + product type of the partner is not visible to the device driver, + this file will not exist. + + When the partner product type is detected, or changed with role + swap, uvevent is also raised that contains PRODUCT_TYPE=<product + type> (for example PRODUCT_TYPE=hub). + + Valid values: + + UFP / device role + ====================== ========================== + undefined - + hub PDUSB Hub + peripheral PDUSB Peripheral + psd Power Bank + ama Alternate Mode Adapter + ====================== ========================== + + DFP / host role + ====================== ========================== + undefined - + hub PDUSB Hub + host PDUSB Host + power_brick Power Brick + amc Alternate Mode Controller + ====================== ========================== + What: /sys/class/typec/<port>-partner>/identity/ Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> @@ -151,31 +194,6 @@ Description: directory exists, it will have an attribute file for every VDO in Discover Identity command result. -What: /sys/class/typec/<port>-partner/identity/id_header -Date: April 2017 -Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> -Description: - ID Header VDO part of Discover Identity command result. The - value will show 0 until Discover Identity command result becomes - available. The value can be polled. - -What: /sys/class/typec/<port>-partner/identity/cert_stat -Date: April 2017 -Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> -Description: - Cert Stat VDO part of Discover Identity command result. The - value will show 0 until Discover Identity command result becomes - available. The value can be polled. - -What: /sys/class/typec/<port>-partner/identity/product -Date: April 2017 -Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> -Description: - Product VDO part of Discover Identity command result. The value - will show 0 until Discover Identity command result becomes - available. The value can be polled. - - USB Type-C cable devices (eg. /sys/class/typec/port0-cable/) Note: Electronically Marked Cables will have a device also for one cable plug @@ -187,9 +205,21 @@ described in USB Type-C and USB Power Delivery specifications. What: /sys/class/typec/<port>-cable/type Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> -Description: - Shows if the cable is active. - Valid values: active, passive +Description: USB Power Delivery Specification defines a set of product types + for the cables. This file will show the product type of the + cable if it is known. If the product type of the cable is not + visible to the device driver, this file will not exist. + + When the cable product type is detected, uvevent is also raised + with PRODUCT_TYPE showing the product type of the cable. + + Valid values: + + ====================== ========================== + undefined - + active Active Cable + passive Passive Cable + ====================== ========================== What: /sys/class/typec/<port>-cable/plug_type Date: April 2017 @@ -202,17 +232,37 @@ Description: - type-c - captive -What: /sys/class/typec/<port>-cable/identity/ +What: /sys/class/typec/<port>-<plug>/number_of_alternate_modes +Date: November 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + Shows the number of alternate modes which are advertised by the plug + associated with a particular cable during Power Delivery discovery. + This file remains hidden until a value greater than or equal to 0 + is set by Type C port driver. + + +USB Type-C partner/cable Power Delivery Identity objects + +NOTE: The following attributes will be applicable to both +partner (e.g /sys/class/typec/port0-partner/) and +cable (e.g /sys/class/typec/port0-cable/) devices. Consequently, the example file +paths below are prefixed with "/sys/class/typec/<port>-{partner|cable}/" to +reflect this. + +What: /sys/class/typec/<port>-{partner|cable}/identity/ Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: This directory appears only if the port device driver is capable of showing the result of Discover Identity USB power delivery command. That will not always be possible even when USB power - delivery is supported. If the directory exists, it will have an - attribute for every VDO returned by Discover Identity command. + delivery is supported, for example when USB power delivery + communication for the port is mostly handled in firmware. If the + directory exists, it will have an attribute file for every VDO + in Discover Identity command result. -What: /sys/class/typec/<port>-cable/identity/id_header +What: /sys/class/typec/<port>-{partner|cable}/identity/id_header Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: @@ -220,7 +270,7 @@ Description: value will show 0 until Discover Identity command result becomes available. The value can be polled. -What: /sys/class/typec/<port>-cable/identity/cert_stat +What: /sys/class/typec/<port>-{partner|cable}/identity/cert_stat Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: @@ -228,7 +278,7 @@ Description: value will show 0 until Discover Identity command result becomes available. The value can be polled. -What: /sys/class/typec/<port>-cable/identity/product +What: /sys/class/typec/<port>-{partner|cable}/identity/product Date: April 2017 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: @@ -236,6 +286,30 @@ Description: will show 0 until Discover Identity command result becomes available. The value can be polled. +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo1 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 1st Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo2 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 2nd Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo3 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 3rd Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + USB Type-C port alternate mode devices. diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index 2da2b1fba2c1..246a45b96d22 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -19,7 +19,7 @@ Description: identify removable sections of the memory before attempting potentially expensive hot-remove memory operation Users: hotplug memory remove tools - http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils + http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils What: /sys/devices/system/memory/memoryX/phys_device Date: September 2008 diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm index 6a37dc33ffdb..74642c73d29c 100644 --- a/Documentation/ABI/testing/sysfs-driver-w1_therm +++ b/Documentation/ABI/testing/sysfs-driver-w1_therm @@ -14,7 +14,7 @@ Users: any user space application which wants to communicate with w1_term device -What: /sys/bus/w1/devices/.../eeprom +What: /sys/bus/w1/devices/.../eeprom_cmd Date: May 2020 Contact: Akira Shimahara <akira215corp@gmail.com> Description: diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv index 66800baab096..637c668cbe45 100644 --- a/Documentation/ABI/testing/sysfs-firmware-sgi_uv +++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv @@ -1,27 +1,159 @@ What: /sys/firmware/sgi_uv/ -Date: August 2008 -Contact: Russ Anderson <rja@sgi.com> +Date: September 2020 +Contact: Justin Ernst <justin.ernst@hpe.com> Description: The /sys/firmware/sgi_uv directory contains information - about the SGI UV platform. + about the UV platform. - Under that directory are a number of files:: + Under that directory are a number of read-only attributes:: + archtype + hub_type + hubless partition_id coherence_id + uv_type + + The archtype entry contains the UV architecture type that + is used to select arch-dependent addresses and features. + It can be set via the OEM_ID in the ACPI MADT table or by + UVsystab entry both passed from UV BIOS. + + The hub_type entry is used to select the type of hub which is + similar to uv_type but encoded in a binary format. Include + the file uv_hub.h to get the definitions. + + The hubless entry basically is present and set only if there + is no hub. In this case the hub_type entry is not present. The partition_id entry contains the partition id. - SGI UV systems can be partitioned into multiple physical + UV systems can be partitioned into multiple physical machines, which each partition running a unique copy - of the operating system. Each partition will have a unique - partition id. To display the partition id, use the command:: - - cat /sys/firmware/sgi_uv/partition_id + of the operating system. Each partition will have a unique + partition id. The coherence_id entry contains the coherence id. - A partitioned SGI UV system can have one or more coherence - domain. The coherence id indicates which coherence domain - this partition is in. To display the coherence id, use the - command:: + A partitioned UV system can have one or more coherence + domains. The coherence id indicates which coherence domain + this partition is in. + + The uv_type entry contains the hub revision number. + This value can be used to identify the UV system version:: + "0.*" = Hubless UV ('*' is subtype) + + "3.0" = UV2 + "5.0" = UV3 + "7.0" = UV4 + "7.1" = UV4a + "9.0" = UV5 + + The /sys/firmware/sgi_uv directory also contains two directories:: + + hubs/ + pcibuses/ + + The hubs directory contains a number of hub objects, each representing + a UV Hub visible to the BIOS. Each hub object's name is appended by a + unique ordinal value (ex. /sys/firmware/sgi_uv/hubs/hub_5) + + Each hub object directory contains a number of read-only attributes:: + + cnode + location + name + nasid + shared + this_partition + + The cnode entry contains the cnode number of the corresponding hub. + If a cnode value is not applicable, the value returned will be -1. + + The location entry contains the location string of the corresponding hub. + This value is used to physically identify a hub within a system. + + The name entry contains the name of the corresponding hub. This name can + be two variants:: + + "UVHub x.x" = A 'node' ASIC, connecting a CPU to the interconnect + fabric. The 'x.x' value represents the ASIC revision. + (ex. 'UVHub 5.0') + + "NLxRouter" = A 'router ASIC, only connecting other ASICs to + the interconnect fabric. The 'x' value representing + the fabric technology version. (ex. 'NL8Router') + + The nasid entry contains the nasid number of the corresponding hub. + If a nasid value is not applicable, the value returned will be -1. + + The shared entry contains a boolean value describing whether the + corresponding hub is shared between system partitions. + + The this_partition entry contains a boolean value describing whether + the corresponding hub is local to the current partition. + + Each hub object directory also contains a number of port objects, + each representing a fabric port on the corresponding hub. + A port object's name is appended by a unique ordinal value + (ex. /sys/firmware/sgi_uv/hubs/hub_5/port_3) + + Each port object directory contains a number of read-only attributes:: + + conn_hub + conn_port + + The conn_hub entry contains a value representing the unique + oridinal value of the hub on the other end of the fabric + cable plugged into the port. If the port is disconnected, + the value returned will be -1. + + The conn_port entry contains a value representing the unique + oridinal value of the port on the other end of the fabric cable + plugged into the port. If the port is disconnected, the value + returned will be -1. + + Ex: + A value of '3' is read from: + /sys/firmware/sgi_uv/hubs/hub_5/port_3/conn_hub + + and a value of '6' is read from: + /sys/firmware/sgi_uv/hubs/hub_5/port_3/conn_port + + representing that this port is connected to: + /sys/firmware/sgi_uv/hubs/hub_3/port_6 + + The pcibuses directory contains a number of PCI bus objects. + Each PCI bus object's name is appended by its PCI bus address. + (ex. pcibus_0003:80) + + Each pcibus object has a number of possible read-only attributes:: + + type + location + slot + ppb_addr + iio_stack + + The type entry contains a value describing the type of IO at + the corresponding PCI bus address. Known possible values + across all UV versions are:: + + BASE IO + PCIe IO + PCIe SLOT + NODE IO + Riser + PPB + + The location entry contains the location string of the UV Hub + of the CPU physically connected to the corresponding PCI bus. + + The slot entry contains the physical slot number of the + corresponding PCI bus. This value is used to physically locate + PCI cards within a system. + + The ppb_addr entry contains the PCI address string of the + bridged PCI bus. This entry is only present when the PCI bus + object type is 'PPB'. - cat /sys/firmware/sgi_uv/coherence_id + The iio_stack entry contains a value describing the IIO stack + number that the corresponding PCI bus object is connected to. diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4 index 99e3d92f8299..2edd0a6672d3 100644 --- a/Documentation/ABI/testing/sysfs-fs-ext4 +++ b/Documentation/ABI/testing/sysfs-fs-ext4 @@ -33,7 +33,7 @@ What: /sys/fs/ext4/<disk>/mb_order2_req Date: March 2008 Contact: "Theodore Ts'o" <tytso@mit.edu> Description: - Tuning parameter which controls the minimum size for + Tuning parameter which controls the minimum size for requests (as a power of 2) where the buddy cache is used diff --git a/Documentation/ABI/testing/sysfs-kernel-btf b/Documentation/ABI/testing/sysfs-kernel-btf index 2c9744b2cd59..fe96efdc9b6c 100644 --- a/Documentation/ABI/testing/sysfs-kernel-btf +++ b/Documentation/ABI/testing/sysfs-kernel-btf @@ -15,3 +15,11 @@ Description: information with description of all internal kernel types. See Documentation/bpf/btf.rst for detailed description of format itself. + +What: /sys/kernel/btf/<module-name> +Date: Nov 2020 +KernelVersion: 5.11 +Contact: bpf@vger.kernel.org +Description: + Read-only binary attribute exposing kernel module's BTF type + information as an add-on to the kernel's BTF (/sys/kernel/btf/vmlinux). diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module index 353c0db5bc1f..a485434d2a0f 100644 --- a/Documentation/ABI/testing/sysfs-module +++ b/Documentation/ABI/testing/sysfs-module @@ -25,7 +25,7 @@ Description: Maximum time allowed for periodic transfers per microframe (μs) However there are cases, when 80% max isochronous bandwidth is too limiting. For example two video streams could require 110 microseconds of isochronous bandwidth per microframe to work - together. + together. Through this setting it is possible to raise the limit so that the host controller would allow allocating more than 100 diff --git a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 index 8af5b9c3fabb..b08379e7fe37 100644 --- a/Documentation/ABI/testing/sysfs-platform-renesas_usb3 +++ b/Documentation/ABI/testing/sysfs-platform-renesas_usb3 @@ -12,6 +12,6 @@ Description: - "peripheral" - switching mode from host to peripheral. Read the file, then it shows the following strings: - + - "host" - The mode is host now. - "peripheral" - The mode is peripheral now. |