summaryrefslogtreecommitdiff
path: root/Documentation/arch/x86/x86_64/boot-options.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arch/x86/x86_64/boot-options.rst')
-rw-r--r--Documentation/arch/x86/x86_64/boot-options.rst319
1 files changed, 319 insertions, 0 deletions
diff --git a/Documentation/arch/x86/x86_64/boot-options.rst b/Documentation/arch/x86/x86_64/boot-options.rst
new file mode 100644
index 000000000000..137432d34109
--- /dev/null
+++ b/Documentation/arch/x86/x86_64/boot-options.rst
@@ -0,0 +1,319 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+AMD64 Specific Boot Options
+===========================
+
+There are many others (usually documented in driver documentation), but
+only the AMD64 specific ones are listed here.
+
+Machine check
+=============
+Please see Documentation/arch/x86/x86_64/machinecheck.rst for sysfs runtime tunables.
+
+ mce=off
+ Disable machine check
+ mce=no_cmci
+ Disable CMCI(Corrected Machine Check Interrupt) that
+ Intel processor supports. Usually this disablement is
+ not recommended, but it might be handy if your hardware
+ is misbehaving.
+ Note that you'll get more problems without CMCI than with
+ due to the shared banks, i.e. you might get duplicated
+ error logs.
+ mce=dont_log_ce
+ Don't make logs for corrected errors. All events reported
+ as corrected are silently cleared by OS.
+ This option will be useful if you have no interest in any
+ of corrected errors.
+ mce=ignore_ce
+ Disable features for corrected errors, e.g. polling timer
+ and CMCI. All events reported as corrected are not cleared
+ by OS and remained in its error banks.
+ Usually this disablement is not recommended, however if
+ there is an agent checking/clearing corrected errors
+ (e.g. BIOS or hardware monitoring applications), conflicting
+ with OS's error handling, and you cannot deactivate the agent,
+ then this option will be a help.
+ mce=no_lmce
+ Do not opt-in to Local MCE delivery. Use legacy method
+ to broadcast MCEs.
+ mce=bootlog
+ Enable logging of machine checks left over from booting.
+ Disabled by default on AMD Fam10h and older because some BIOS
+ leave bogus ones.
+ If your BIOS doesn't do that it's a good idea to enable though
+ to make sure you log even machine check events that result
+ in a reboot. On Intel systems it is enabled by default.
+ mce=nobootlog
+ Disable boot machine check logging.
+ mce=monarchtimeout (number)
+ monarchtimeout:
+ Sets the time in us to wait for other CPUs on machine checks. 0
+ to disable.
+ mce=bios_cmci_threshold
+ Don't overwrite the bios-set CMCI threshold. This boot option
+ prevents Linux from overwriting the CMCI threshold set by the
+ bios. Without this option, Linux always sets the CMCI
+ threshold to 1. Enabling this may make memory predictive failure
+ analysis less effective if the bios sets thresholds for memory
+ errors since we will not see details for all errors.
+ mce=recovery
+ Force-enable recoverable machine check code paths
+
+ nomce (for compatibility with i386)
+ same as mce=off
+
+ Everything else is in sysfs now.
+
+APICs
+=====
+
+ apic
+ Use IO-APIC. Default
+
+ noapic
+ Don't use the IO-APIC.
+
+ disableapic
+ Don't use the local APIC
+
+ nolapic
+ Don't use the local APIC (alias for i386 compatibility)
+
+ pirq=...
+ See Documentation/arch/x86/i386/IO-APIC.rst
+
+ noapictimer
+ Don't set up the APIC timer
+
+ no_timer_check
+ Don't check the IO-APIC timer. This can work around
+ problems with incorrect timer initialization on some boards.
+
+ apicpmtimer
+ Do APIC timer calibration using the pmtimer. Implies
+ apicmaintimer. Useful when your PIT timer is totally broken.
+
+Timing
+======
+
+ notsc
+ Deprecated, use tsc=unstable instead.
+
+ nohpet
+ Don't use the HPET timer.
+
+Idle loop
+=========
+
+ idle=poll
+ Don't do power saving in the idle loop using HLT, but poll for rescheduling
+ event. This will make the CPUs eat a lot more power, but may be useful
+ to get slightly better performance in multiprocessor benchmarks. It also
+ makes some profiling using performance counters more accurate.
+ Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
+ CPUs) this option has no performance advantage over the normal idle loop.
+ It may also interact badly with hyperthreading.
+
+Rebooting
+=========
+
+ reboot=b[ios] | t[riple] | k[bd] | a[cpi] | e[fi] | p[ci] [, [w]arm | [c]old]
+ bios
+ Use the CPU reboot vector for warm reset
+ warm
+ Don't set the cold reboot flag
+ cold
+ Set the cold reboot flag
+ triple
+ Force a triple fault (init)
+ kbd
+ Use the keyboard controller. cold reset (default)
+ acpi
+ Use the ACPI RESET_REG in the FADT. If ACPI is not configured or
+ the ACPI reset does not work, the reboot path attempts the reset
+ using the keyboard controller.
+ efi
+ Use efi reset_system runtime service. If EFI is not configured or
+ the EFI reset does not work, the reboot path attempts the reset using
+ the keyboard controller.
+ pci
+ Use a write to the PCI config space register 0xcf9 to trigger reboot.
+
+ Using warm reset will be much faster especially on big memory
+ systems because the BIOS will not go through the memory check.
+ Disadvantage is that not all hardware will be completely reinitialized
+ on reboot so there may be boot problems on some systems.
+
+ reboot=force
+ Don't stop other CPUs on reboot. This can make reboot more reliable
+ in some cases.
+
+ reboot=default
+ There are some built-in platform specific "quirks" - you may see:
+ "reboot: <name> series board detected. Selecting <type> for reboots."
+ In the case where you think the quirk is in error (e.g. you have
+ newer BIOS, or newer board) using this option will ignore the built-in
+ quirk table, and use the generic default reboot actions.
+
+NUMA
+====
+
+ numa=off
+ Only set up a single NUMA node spanning all memory.
+
+ numa=noacpi
+ Don't parse the SRAT table for NUMA setup
+
+ numa=nohmat
+ Don't parse the HMAT table for NUMA setup, or soft-reserved memory
+ partitioning.
+
+ numa=fake=<size>[MG]
+ If given as a memory unit, fills all system RAM with nodes of
+ size interleaved over physical nodes.
+
+ numa=fake=<N>
+ If given as an integer, fills all system RAM with N fake nodes
+ interleaved over physical nodes.
+
+ numa=fake=<N>U
+ If given as an integer followed by 'U', it will divide each
+ physical node into N emulated nodes.
+
+ACPI
+====
+
+ acpi=off
+ Don't enable ACPI
+ acpi=ht
+ Use ACPI boot table parsing, but don't enable ACPI interpreter
+ acpi=force
+ Force ACPI on (currently not needed)
+ acpi=strict
+ Disable out of spec ACPI workarounds.
+ acpi_sci={edge,level,high,low}
+ Set up ACPI SCI interrupt.
+ acpi=noirq
+ Don't route interrupts
+ acpi=nocmcff
+ Disable firmware first mode for corrected errors. This
+ disables parsing the HEST CMC error source to check if
+ firmware has set the FF flag. This may result in
+ duplicate corrected error reports.
+
+PCI
+===
+
+ pci=off
+ Don't use PCI
+ pci=conf1
+ Use conf1 access.
+ pci=conf2
+ Use conf2 access.
+ pci=rom
+ Assign ROMs.
+ pci=assign-busses
+ Assign busses
+ pci=irqmask=MASK
+ Set PCI interrupt mask to MASK
+ pci=lastbus=NUMBER
+ Scan up to NUMBER busses, no matter what the mptable says.
+ pci=noacpi
+ Don't use ACPI to set up PCI interrupt routing.
+
+IOMMU (input/output memory management unit)
+===========================================
+Multiple x86-64 PCI-DMA mapping implementations exist, for example:
+
+ 1. <kernel/dma/direct.c>: use no hardware/software IOMMU at all
+ (e.g. because you have < 3 GB memory).
+ Kernel boot message: "PCI-DMA: Disabling IOMMU"
+
+ 2. <arch/x86/kernel/amd_gart_64.c>: AMD GART based hardware IOMMU.
+ Kernel boot message: "PCI-DMA: using GART IOMMU"
+
+ 3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used
+ e.g. if there is no hardware IOMMU in the system and it is need because
+ you have >3GB memory or told the kernel to us it (iommu=soft))
+ Kernel boot message: "PCI-DMA: Using software bounce buffering
+ for IO (SWIOTLB)"
+
+::
+
+ iommu=[<size>][,noagp][,off][,force][,noforce]
+ [,memaper[=<order>]][,merge][,fullflush][,nomerge]
+ [,noaperture]
+
+General iommu options:
+
+ off
+ Don't initialize and use any kind of IOMMU.
+ noforce
+ Don't force hardware IOMMU usage when it is not needed. (default).
+ force
+ Force the use of the hardware IOMMU even when it is
+ not actually needed (e.g. because < 3 GB memory).
+ soft
+ Use software bounce buffering (SWIOTLB) (default for
+ Intel machines). This can be used to prevent the usage
+ of an available hardware IOMMU.
+
+iommu options only relevant to the AMD GART hardware IOMMU:
+
+ <size>
+ Set the size of the remapping area in bytes.
+ allowed
+ Overwrite iommu off workarounds for specific chipsets.
+ fullflush
+ Flush IOMMU on each allocation (default).
+ nofullflush
+ Don't use IOMMU fullflush.
+ memaper[=<order>]
+ Allocate an own aperture over RAM with size 32MB<<order.
+ (default: order=1, i.e. 64MB)
+ merge
+ Do scatter-gather (SG) merging. Implies "force" (experimental).
+ nomerge
+ Don't do scatter-gather (SG) merging.
+ noaperture
+ Ask the IOMMU not to touch the aperture for AGP.
+ noagp
+ Don't initialize the AGP driver and use full aperture.
+ panic
+ Always panic when IOMMU overflows.
+
+iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
+implementation:
+
+ swiotlb=<slots>[,force,noforce]
+ <slots>
+ Prereserve that many 2K slots for the software IO bounce buffering.
+ force
+ Force all IO through the software TLB.
+ noforce
+ Do not initialize the software TLB.
+
+
+Miscellaneous
+=============
+
+ nogbpages
+ Do not use GB pages for kernel direct mappings.
+ gbpages
+ Use GB pages for kernel direct mappings.
+
+
+AMD SEV (Secure Encrypted Virtualization)
+=========================================
+Options relating to AMD SEV, specified via the following format:
+
+::
+
+ sev=option1[,option2]
+
+The available options are:
+
+ debug
+ Enable debug messages.