diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt')
-rw-r--r-- | Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 59 |
1 files changed, 29 insertions, 30 deletions
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 46d0af1f0872..72d481c8dd48 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -58,19 +58,15 @@ This binding for the SCU power domain providers uses the generic power domain binding[2]. Required properties: -- compatible: Should be "fsl,scu-pd". -- #address-cells: Should be 1. -- #size-cells: Should be 0. +- compatible: Should be one of: + "fsl,imx8qm-scu-pd", + "fsl,imx8qxp-scu-pd" + followed by "fsl,scu-pd" -Required properties for power domain sub nodes: -- #power-domain-cells: Must be 0. - -Optional Properties: -- reg: Resource ID of this power domain. - No exist means uncontrollable by user. +- #power-domain-cells: Must be 1. Contains the Resource ID used by + SCU commands. See detailed Resource ID list from: - include/dt-bindings/power/imx-rsrc.h -- power-domains: phandle pointing to the parent power domain. + include/dt-bindings/firmware/imx/rsrc.h Clock bindings based on SCU Message Protocol ------------------------------------------------------------ @@ -78,7 +74,10 @@ Clock bindings based on SCU Message Protocol This binding uses the common clock binding[1]. Required properties: -- compatible: Should be "fsl,imx8qxp-clock". +- compatible: Should be one of: + "fsl,imx8qm-clock" + "fsl,imx8qxp-clock" + followed by "fsl,scu-clk" - #clock-cells: Should be 1. Contains the Clock ID value. - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names @@ -96,13 +95,16 @@ Pinctrl bindings based on SCU Message Protocol This binding uses the i.MX common pinctrl binding[3]. Required properties: -- compatible: Should be "fsl,imx8qxp-iomuxc". +- compatible: Should be one of: + "fsl,imx8qm-iomuxc", + "fsl,imx8qxp-iomuxc". Required properties for Pinctrl sub nodes: - fsl,pins: Each entry consists of 3 integers which represents the mux and config setting for one pin. The first 2 integers <pin_id mux_mode> are specified using a PIN_FUNC_ID macro, which can be found in + <dt-bindings/pinctrl/pads-imx8qm.h>, <dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. @@ -114,6 +116,12 @@ Required properties for Pinctrl sub nodes: [2] Documentation/devicetree/bindings/power/power_domain.txt [3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +RTC bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: should be "fsl,imx8qxp-sc-rtc"; + Example (imx8qxp): ------------- lsio_mu1: mailbox@5d1c0000 { @@ -136,7 +144,7 @@ firmware { &lsio_mu1 1 3>; clk: clk { - compatible = "fsl,imx8qxp-clk"; + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; #clock-cells = <1>; }; @@ -152,22 +160,13 @@ firmware { ... }; - imx8qx-pm { - compatible = "fsl,scu-pd"; - #address-cells = <1>; - #size-cells = <0>; - - pd_dma: dma-power-domain { - #power-domain-cells = <0>; + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; - pd_dma_lpuart0: dma-lpuart0@57 { - reg = <SC_R_UART_0>; - #power-domain-cells = <0>; - power-domains = <&pd_dma>; - }; - ... - }; - ... + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; }; }; }; @@ -179,5 +178,5 @@ serial@5a060000 { clocks = <&clk IMX8QXP_UART0_CLK>, <&clk IMX8QXP_UART0_IPG_CLK>; clock-names = "per", "ipg"; - power-domains = <&pd_dma_lpuart0>; + power-domains = <&pd IMX_SC_R_UART_0>; }; |