1 files changed, 0 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
deleted file mode 100644
index 12ab2f723eb0..000000000000
--- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Tegra SoC SATA AHCI controller
-
-Required properties :
-- compatible : Must be one of:
-  - Tegra124 : "nvidia,tegra124-ahci"
-  - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
-  - Tegra210 : "nvidia,tegra210-ahci"
-- reg : Should contain 2 entries:
-  - AHCI register set (SATA BAR5)
-  - SATA register set
-- interrupts : Defines the interrupt used by SATA
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - sata
-  - sata-oob
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - sata
-  - sata-oob
-  - sata-cold
-- phys : Must contain an entry for each entry in phy-names.
-  See ../phy/phy-bindings.txt for details.
-- phy-names : Must include the following entries:
-  - For Tegra124 and Tegra132:
-    - sata-phy : XUSB PADCTL SATA PHY
-- For Tegra124 and Tegra132:
-  - hvdd-supply : Defines the SATA HVDD regulator
-  - vddio-supply : Defines the SATA VDDIO regulator
-  - avdd-supply : Defines the SATA AVDD regulator
-  - target-5v-supply : Defines the SATA 5V power regulator
-  - target-12v-supply : Defines the SATA 12V power regulator
-
-Optional properties:
-- reg :
-  - AUX register set
-- clock-names :
-  - cml1 :
-    cml1 clock should be defined here if the PHY driver
-    doesn't manage them. If it does, they should not be.
-- phy-names :
-  - For T210:
-    - sata-phy