diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt | 138 |
1 files changed, 0 insertions, 138 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt deleted file mode 100644 index 8e5a7d868557..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt +++ /dev/null @@ -1,138 +0,0 @@ -Broadcom Kona Family Clocks - -This binding is associated with Broadcom SoCs having "Kona" style -clock control units (CCUs). A CCU is a clock provider that manages -a set of clock signals. Each CCU is represented by a node in the -device tree. - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible - Shall have a value of the form "brcm,<model>-<which>-ccu", - where <model> is a Broadcom SoC model number and <which> is - the name of a defined CCU. For example: - "brcm,bcm11351-root-ccu" - The compatible strings used for each supported SoC family - are defined below. -- reg - Shall define the base and range of the address space - containing clock control registers -- #clock-cells - Shall have value <1>. The permitted clock-specifier values - are defined below. -- clock-output-names - Shall be an ordered list of strings defining the names of - the clocks provided by the CCU. - -Device tree example: - - slave_ccu: slave_ccu { - compatible = "brcm,bcm11351-slave-ccu"; - reg = <0x3e011000 0x0f00>; - #clock-cells = <1>; - clock-output-names = "uartb", - "uartb2", - "uartb3", - "uartb4"; - }; - - ref_crystal_clk: ref_crystal { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <26000000>; - }; - - uart@3e002000 { - compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - reg = <0x3e002000 0x1000>; - clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - }; - -BCM281XX family ---------------- -CCU compatible string values for SoCs in the BCM281XX family are: - "brcm,bcm11351-root-ccu" - "brcm,bcm11351-aon-ccu" - "brcm,bcm11351-hub-ccu" - "brcm,bcm11351-master-ccu" - "brcm,bcm11351-slave-ccu" - -The following table defines the set of CCUs and clock specifiers for -BCM281XX family clocks. When a clock consumer references a clocks, -its symbolic specifier (rather than its numeric index value) should -be used. These specifiers are defined in: - "include/dt-bindings/clock/bcm281xx.h" - - CCU Clock Type Index Specifier - --- ----- ---- ----- --------- - root frac_1m peri 0 BCM281XX_ROOT_CCU_FRAC_1M - - aon hub_timer peri 0 BCM281XX_AON_CCU_HUB_TIMER - aon pmu_bsc peri 1 BCM281XX_AON_CCU_PMU_BSC - aon pmu_bsc_var peri 2 BCM281XX_AON_CCU_PMU_BSC_VAR - - hub tmon_1m peri 0 BCM281XX_HUB_CCU_TMON_1M - - master sdio1 peri 0 BCM281XX_MASTER_CCU_SDIO1 - master sdio2 peri 1 BCM281XX_MASTER_CCU_SDIO2 - master sdio3 peri 2 BCM281XX_MASTER_CCU_SDIO3 - master sdio4 peri 3 BCM281XX_MASTER_CCU_SDIO4 - master dmac peri 4 BCM281XX_MASTER_CCU_DMAC - master usb_ic peri 5 BCM281XX_MASTER_CCU_USB_IC - master hsic2_48m peri 6 BCM281XX_MASTER_CCU_HSIC_48M - master hsic2_12m peri 7 BCM281XX_MASTER_CCU_HSIC_12M - - slave uartb peri 0 BCM281XX_SLAVE_CCU_UARTB - slave uartb2 peri 1 BCM281XX_SLAVE_CCU_UARTB2 - slave uartb3 peri 2 BCM281XX_SLAVE_CCU_UARTB3 - slave uartb4 peri 3 BCM281XX_SLAVE_CCU_UARTB4 - slave ssp0 peri 4 BCM281XX_SLAVE_CCU_SSP0 - slave ssp2 peri 5 BCM281XX_SLAVE_CCU_SSP2 - slave bsc1 peri 6 BCM281XX_SLAVE_CCU_BSC1 - slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2 - slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3 - slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM - - -BCM21664 family ---------------- -CCU compatible string values for SoCs in the BCM21664 family are: - "brcm,bcm21664-root-ccu" - "brcm,bcm21664-aon-ccu" - "brcm,bcm21664-master-ccu" - "brcm,bcm21664-slave-ccu" - -The following table defines the set of CCUs and clock specifiers for -BCM21664 family clocks. When a clock consumer references a clocks, -its symbolic specifier (rather than its numeric index value) should -be used. These specifiers are defined in: - "include/dt-bindings/clock/bcm21664.h" - - CCU Clock Type Index Specifier - --- ----- ---- ----- --------- - root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M - - aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER - - master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1 - master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2 - master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3 - master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4 - master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP - master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP - master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP - master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP - - slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB - slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2 - slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3 - slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4 - slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1 - slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2 - slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3 - slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4 |