1 files changed, 0 insertions, 115 deletions
diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
deleted file mode 100644
index 4d7c76f0b356..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/divider.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-Binding for TI divider clock
-
-This binding uses the common clock binding[1].  It assumes a
-register-mapped adjustable clock rate divider that does not gate and has
-only one input clock or parent.  By default the value programmed into
-the register is one less than the actual divisor value.  E.g:
-
-register value		actual divisor value
-0			1
-1			2
-2			3
-
-This assumption may be modified by the following optional properties:
-
-ti,index-starts-at-one - valid divisor values start at 1, not the default
-of 0.  E.g:
-register value		actual divisor value
-1			1
-2			2
-3			3
-
-ti,index-power-of-two - valid divisor values are powers of two.  E.g:
-register value		actual divisor value
-0			1
-1			2
-2			4
-
-Additionally an array of valid dividers may be supplied like so:
-
-	ti,dividers = <4>, <8>, <0>, <16>;
-
-Which will map the resulting values to a divisor table by their index:
-register value		actual divisor value
-0			4
-1			8
-2			<invalid divisor, skipped>
-3			16
-
-Any zero value in this array means the corresponding bit-value is invalid
-and must not be used.
-
-The binding must also provide the register to control the divider and
-unless the divider array is provided, min and max dividers. Optionally
-the number of bits to shift that mask, if necessary. If the shift value
-is missing it is the same as supplying a zero shift.
-
-This binding can also optionally provide support to the hardware autoidle
-feature, see [2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
-
-Required properties:
-- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : link to phandle of parent clock
-- reg : offset for register controlling adjustable divider
-
-Optional properties:
-- clock-output-names : from common clock binding.
-- ti,dividers : array of integers defining divisors
-- ti,bit-shift : number of bits to shift the divider value, defaults to 0
-- ti,min-div : min divisor for dividing the input clock rate, only
-  needed if the first divisor is offset from the default value (1)
-- ti,max-div : max divisor for dividing the input clock rate, only needed
-  if ti,dividers is not defined.
-- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
-  only valid if ti,dividers is not defined.
-- ti,index-power-of-two : valid divisor programming must be a power of two,
-  only valid if ti,dividers is not defined.
-- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
-  see [2]
-- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
-  see [2]
-- ti,set-rate-parent : clk_set_rate is propagated to parent
-- ti,latch-bit : latch the divider value to HW, only needed if the register
-  access requires this. As an example dra76x DPLL_GMAC H14 divider implements
-  such behavior.
-
-Examples:
-dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
-	#clock-cells = <0>;
-	compatible = "ti,divider-clock";
-	clocks = <&dpll_usb_ck>;
-	ti,max-div = <127>;
-	reg = <0x190>;
-	ti,index-starts-at-one;
-};
-
-aess_fclk: aess_fclk@4a004528 {
-	#clock-cells = <0>;
-	compatible = "ti,divider-clock";
-	clocks = <&abe_clk>;
-	ti,bit-shift = <24>;
-	reg = <0x528>;
-	ti,max-div = <2>;
-};
-
-dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
-	#clock-cells = <0>;
-	compatible = "ti,composite-divider-clock";
-	clocks = <&dpll_core_x2_ck>;
-	ti,max-div = <31>;
-	reg = <0x0134>;
-	ti,index-starts-at-one;
-};
-
-ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
-	#clock-cells = <0>;
-	compatible = "ti,composite-divider-clock";
-	clocks = <&corex2_fck>;
-	ti,bit-shift = <8>;
-	reg = <0x0a40>;
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-};