diff options
Diffstat (limited to 'Documentation/devicetree/bindings/counter')
5 files changed, 181 insertions, 23 deletions
diff --git a/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml b/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml new file mode 100644 index 000000000000..384ca63b64d5 --- /dev/null +++ b/Documentation/devicetree/bindings/counter/fsl,ftm-quaddec.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/fsl,ftm-quaddec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FlexTimer Quadrature decoder counter + +description: + Exposes a simple counter for the quadrature decoder mode. + +maintainers: + - Frank Li <Frank.li@nxp.com> + +properties: + compatible: + const: fsl,ftm-quaddec + + reg: + maxItems: 1 + + big-endian: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + counter@29d0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x29d0000 0x10000>; + big-endian; + }; diff --git a/Documentation/devicetree/bindings/counter/ftm-quaddec.txt b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt deleted file mode 100644 index 4d18cd722074..000000000000 --- a/Documentation/devicetree/bindings/counter/ftm-quaddec.txt +++ /dev/null @@ -1,18 +0,0 @@ -FlexTimer Quadrature decoder counter - -This driver exposes a simple counter for the quadrature decoder mode. - -Required properties: -- compatible: Must be "fsl,ftm-quaddec". -- reg: Must be set to the memory region of the flextimer. - -Optional property: -- big-endian: Access the device registers in big-endian mode. - -Example: - counter0: counter@29d0000 { - compatible = "fsl,ftm-quaddec"; - reg = <0x0 0x29d0000 0x0 0x10000>; - big-endian; - status = "disabled"; - }; diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml new file mode 100644 index 000000000000..fd075d104631 --- /dev/null +++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Interrupt counter + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + A generic interrupt counter to measure interrupt frequency. It was developed + and used for agricultural devices to measure rotation speed of wheels or + other tools. Since the direction of rotation is not important, only one + signal line is needed. + Interrupts or gpios are required. If both are defined, the interrupt will + take precedence for counting interrupts. + +properties: + compatible: + const: interrupt-counter + + interrupts: + maxItems: 1 + + gpios: + maxItems: 1 + +required: + - compatible + +anyOf: + - required: [ interrupts-extended ] + - required: [ interrupts ] + - required: [ gpios ] + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + counter-0 { + compatible = "interrupt-counter"; + interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>; + }; + + counter-1 { + compatible = "interrupt-counter"; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + + counter-2 { + compatible = "interrupt-counter"; + interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + }; + +... diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml new file mode 100644 index 000000000000..4e0b2d2b303e --- /dev/null +++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Enhanced Capture (eCAP) Module + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: | + The eCAP module resources can be used to capture timestamps + on input signal events (falling/rising edges). + +properties: + compatible: + const: ti,am62-ecap-capture + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + capture@23100000 { /* eCAP in capture mode on am62x */ + compatible = "ti,am62-ecap-capture"; + reg = <0x00 0x23100000 0x00 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + }; + }; diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml index 85f1ff83afe7..c882ab5fcf1f 100644 --- a/Documentation/devicetree/bindings/counter/ti-eqep.yaml +++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: ti,am3352-eqep + enum: + - ti,am3352-eqep + - ti,am62-eqep reg: maxItems: 1 @@ -21,19 +23,35 @@ properties: maxItems: 1 clocks: - description: The clock that determines the SYSCLKOUT rate for the eQEP - peripheral. + description: The functional and interface clock that determines the clock + rate for the eQEP peripheral. maxItems: 1 clock-names: const: sysclkout + power-domains: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,am62-eqep + then: + properties: + clock-names: false + + required: + - power-domains + required: - compatible - reg - interrupts - clocks - - clock-names additionalProperties: false @@ -43,7 +61,6 @@ examples: compatible = "ti,am3352-eqep"; reg = <0x180 0x80>; clocks = <&l4ls_gclk>; - clock-names = "sysclkout"; interrupts = <79>; }; |