diff options
Diffstat (limited to 'Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml new file mode 100644 index 000000000000..0a9ed2848b7c --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml @@ -0,0 +1,266 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2008-2011 Freescale Semiconductor Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SEC 4 + +maintainers: + - '"Horia Geantă" <horia.geanta@nxp.com>' + - Pankaj Gupta <pankaj.gupta@nxp.com> + - Gaurav Jain <gaurav.jain@nxp.com> + +description: | + NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator + Accelerator and Assurance Module (CAAM). + + SEC 4 h/w can process requests from 2 types of sources. + 1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4). + 2. Job Rings (HW interface between cores & SEC 4 registers). + + High Speed Data Path Configuration: + + HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts + such as the P4080. The number of simultaneous dequeues the QI can make is + equal to the number of Descriptor Controller (DECO) engines in a particular + SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus + dequeue from 5 subportals simultaneously. + + Job Ring Data Path Configuration: + + Each JR is located on a separate 4k page, they may (or may not) be made visible + in the memory partition devoted to a particular core. The P4080 has 4 JRs, so + up to 4 JRs can be configured; and all 4 JRs process requests in parallel. + +properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4 + - const: fsl,sec-v5.0 + - const: fsl,sec-v4.0 + - items: + - enum: + - fsl,imx6ul-caam + - fsl,sec-v5.0 + - const: fsl,sec-v4.0 + - const: fsl,sec-v4.0 + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + '#address-cells': + enum: [1, 2] + + '#size-cells': + enum: [1, 2] + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: [mem, aclk, ipg, emi_slow] + + dma-coherent: true + + interrupts: + maxItems: 1 + + fsl,sec-era: + description: Defines the 'ERA' of the SEC device. + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '^jr@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Job Ring (JR) Node. Defines data processing interface to SEC 4 across the + peripheral bus for purposes of processing cryptographic descriptors. The + specified address range can be made visible to one (or more) cores. The + interrupt defined for this node is controlled within the address range of + this node. + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-job-ring + - const: fsl,sec-v5.0-job-ring + - const: fsl,sec-v4.0-job-ring + - items: + - const: fsl,sec-v5.0-job-ring + - const: fsl,sec-v4.0-job-ring + - const: fsl,sec-v4.0-job-ring + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,liodn: + description: + Specifies the LIODN to be used in conjunction with the ppid-to-liodn + table that specifies the PPID to LIODN mapping. Needed if the PAMU is + used. Value is a 12 bit value where value is a LIODN ID for this JR. + This property is normally set by boot firmware. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xfff + + '^rtic@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Run Time Integrity Check (RTIC) Node. Defines a register space that + contains up to 5 sets of addresses and their lengths (sizes) that will be + checked at run time. After an initial hash result is calculated, these + addresses are checked by HW to monitor any change. If any memory is + modified, a Security Violation is triggered (see SNVS definition). + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-rtic + - const: fsl,sec-v5.0-rtic + - const: fsl,sec-v4.0-rtic + - const: fsl,sec-v4.0-rtic + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + patternProperties: + '^rtic-[a-z]@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Run Time Integrity Check (RTIC) Memory Node defines individual RTIC + memory regions that are used to perform run-time integrity check of + memory areas that should not modified. The node defines a register + that contains the memory address & length (combined) and a second + register that contains the hash result in big endian format. + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-rtic-memory + - const: fsl,sec-v5.0-rtic-memory + - const: fsl,sec-v4.0-rtic-memory + - const: fsl,sec-v4.0-rtic-memory + + reg: + items: + - description: RTIC memory address + - description: RTIC hash result + + fsl,liodn: + description: + Specifies the LIODN to be used in conjunction with the + ppid-to-liodn table that specifies the PPID to LIODN mapping. + Needed if the PAMU is used. Value is a 12 bit value where value + is a LIODN ID for this JR. This property is normally set by boot + firmware. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xfff + + fsl,rtic-region: + description: + Specifies the HW address (36 bit address) for this region + followed by the length of the HW partition to be checked; + the address is represented as a 64 bit quantity followed + by a 32 bit length. + $ref: /schemas/types.yaml#/definitions/uint32-array + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +examples: + - | + crypto@300000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2>; + + jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2>; + }; + + jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2>; + }; + + jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2>; + }; + + jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20>, <0x100 0x80>; + }; + + rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20>, <0x200 0x80>; + }; + + rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20>, <0x300 0x80>; + }; + + rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20>, <0x500 0x80>; + }; + }; + }; +... |