diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/imx')
14 files changed, 964 insertions, 431 deletions
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml new file mode 100644 index 000000000000..92a0a797d099 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx-display-subsystem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX DRM master device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: + The freescale i.MX DRM master device is a virtual device needed to list all + IPU or other display interface nodes that comprise the graphics subsystem. + +properties: + compatible: + const: fsl,imx-display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should contain a list of phandles pointing to camera + sensor interface ports of IPU devices. + +required: + - compatible + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "fsl,imx-display-subsystem"; + ports = <&ipu_di0>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt deleted file mode 100644 index f4df9e83bcd2..000000000000 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ /dev/null @@ -1,57 +0,0 @@ -Freescale imx21 Framebuffer - -This framebuffer driver supports devices imx1, imx21, imx25, and imx27. - -Required properties: -- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21 -- reg : Should contain 1 register ranges(address and length) -- interrupts : One interrupt of the fb dev - -Required nodes: -- display: Phandle to a display node as described in - Documentation/devicetree/bindings/display/panel/display-timing.txt - Additional, the display node has to define properties: - - bits-per-pixel: Bits per pixel - - fsl,pcr: LCDC PCR value - A display node may optionally define - - fsl,aus-mode: boolean to enable AUS mode (only for imx21) - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. -- fsl,dmacr: DMA Control Register value. This is optional. By default, the - register is not modified as recommended by the datasheet. -- fsl,lpccr: Contrast Control Register value. This property provides the - default value for the contrast control register. - If that property is omitted, the register is zeroed. -- fsl,lscr1: LCDC Sharp Configuration Register value. - -Example: - - imxfb: fb@10021000 { - compatible = "fsl,imx21-fb"; - interrupts = <61>; - reg = <0x10021000 0x1000>; - display = <&display0>; - }; - - ... - - display0: display0 { - model = "Primeview-PD050VL1"; - bits-per-pixel = <16>; - fsl,pcr = <0xf0c88080>; /* non-standard but required */ - display-timings { - native-mode = <&timing_disp0>; - timing_disp0: 640x480 { - hactive = <640>; - vactive = <480>; - hback-porch = <112>; - hfront-porch = <36>; - hsync-len = <32>; - vback-porch = <33>; - vfront-porch = <33>; - vsync-len = <2>; - clock-frequency = <25000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml new file mode 100644 index 000000000000..c2b29622bceb --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27 + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + - Pengutronix Kernel Team <kernel@pengutronix.de> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx1-fb + - fsl,imx21-fb + - items: + - enum: + - fsl,imx25-fb + - fsl,imx27-fb + - const: fsl,imx21-fb + - items: + - const: fsl,imx25-lcdc + - const: fsl,imx21-lcdc + + clocks: + maxItems: 3 + + clock-names: + items: + - const: ipg + - const: ahb + - const: per + + port: + $ref: /schemas/graph.yaml#/properties/port + + display: + $ref: /schemas/types.yaml#/definitions/phandle + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + lcd-supply: + description: + Regulator for LCD supply voltage. + + fsl,dmacr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Override value for DMA Control Register + + fsl,lpccr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Contrast Control Register value. + + fsl,lscr1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + LCDC Sharp Configuration Register value. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx1-lcdc + - fsl,imx21-lcdc + then: + properties: + display: false + fsl,dmacr: false + fsl,lpccr: false + fsl,lscr1: false + + required: + - port + + else: + properties: + port: false + + required: + - display + +required: + - compatible + - clocks + - clock-names + - interrupts + - reg + +additionalProperties: false + +examples: + - | + lcdc@53fbc000 { + compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc"; + reg = <0x53fbc000 0x4000>; + interrupts = <39>; + clocks = <&clks 103>, <&clks 66>, <&clks 49>; + clock-names = "ipg", "ahb", "per"; + + port { + parallel_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + - | + imxfb: fb@10021000 { + compatible = "fsl,imx21-fb"; + interrupts = <61>; + reg = <0x10021000 0x1000>; + display = <&display0>; + clocks = <&clks 103>, <&clks 49>, <&clks 66>; + clock-names = "ipg", "ahb", "per"; + }; + + display0: display0 { + model = "Primeview-PD050VL1"; + bits-per-pixel = <16>; + fsl,pcr = <0xf0c88080>; /* non-standard but required */ + + display-timings { + native-mode = <&timing_disp0>; + timing_disp0: timing0 { + hactive = <640>; + vactive = <480>; + hback-porch = <112>; + hfront-porch = <36>; + hsync-len = <32>; + vback-porch = <33>; + vfront-porch = <33>; + vsync-len = <2>; + clock-frequency = <25000000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml new file mode 100644 index 000000000000..bbcfe7e2958b --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx-parallel-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Parallel display support + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,imx-parallel-display + + interface-pix-fmt: + $ref: /schemas/types.yaml#/definitions/string + enum: + - rgb24 + - rgb565 + - bgr666 + - lvds666 + + ddc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle describing the i2c bus handling the display data channel + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: input port connected to the IPU display interface + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: output port connected to a panel + +required: + - compatible + +additionalProperties: false + +examples: + - | + display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml new file mode 100644 index 000000000000..180c4b510fb1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 DWC HDMI TX Encoder + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - fsl,imx6dl-hdmi + - fsl,imx6q-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the iomuxc-gpr region containing the HDMI multiplexer control + register. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + This device has four video ports, corresponding to the four inputs of the + HDMI multiplexer. Each port shall have a single endpoint. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: First input of the HDMI multiplexer + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Second input of the HDMI multiplexer + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Third input of the HDMI multiplexer + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Fourth input of the HDMI multiplexer + + anyOf: + - required: + - port@0 + - required: + - port@1 + - required: + - port@2 + - required: + - port@3 + +required: + - compatible + - reg + - clocks + - clock-names + - gpr + - interrupts + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + hdmi: hdmi@120000 { + reg = <0x00120000 0x9000>; + interrupts = <0 115 0x04>; + gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; + clock-names = "iahb", "isfr"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml new file mode 100644 index 000000000000..ec78645d4de0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ipu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX IPUv3 + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx51-ipu + - fsl,imx53-ipu + - fsl,imx6q-ipu + - items: + - const: fsl,imx6qp-ipu + - const: fsl,imx6q-ipu + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: bus + - const: di0 + - const: di1 + + resets: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + fsl,prg: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to prg node associated with this IPU instance + + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI0 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI1 + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DI0 + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DI1 + +required: + - compatible + - reg + - interrupts + - resets + +additionalProperties: false + +examples: + - | + display-controller@18000000 { + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x080000000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11 10>; + resets = <&src 2>; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&display_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml new file mode 100644 index 000000000000..1646f41d8f72 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale LVDS Display Bridge (ldb) + +description: + The LVDS Display Bridge device tree node contains up to two lvds-channel + nodes describing each of the two LVDS encoder channels of the bridge. + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx53-ldb + - items: + - enum: + - fsl,imx6q-ldb + - const: fsl,imx53-ldb + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle points to the iomuxc-gpr region containing the LVDS + control register. + + clocks: + minItems: 6 + maxItems: 8 + + clock-names: + oneOf: + - items: + - const: di0_pll + - const: di1_pll + - const: di0_sel + - const: di1_sel + - const: di0 + - const: di1 + - items: + - const: di0_pll + - const: di1_pll + - const: di0_sel + - const: di1_sel + - const: di2_sel + - const: di3_sel + - const: di0 + - const: di1 + + fsl,dual-channel: + $ref: /schemas/types.yaml#/definitions/flag + description: + if it exists, only LVDS channel 0 should + be configured - one input will be distributed on both outputs in dual + channel mode + +patternProperties: + '^lvds-channel@[0-1]$': + type: object + description: + Each LVDS Channel has to contain either an of graph link to a panel device node + or a display-timings node that describes the video timings for the connected + LVDS display as well as the fsl,data-mapping and fsl,data-width properties. + + properties: + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + display-timings: + $ref: /schemas/display/panel/display-timings.yaml# + + fsl,data-mapping: + enum: + - spwg + - jeida + + fsl,data-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: should be <18> or <24> + enum: + - 18 + - 24 + + fsl,panel: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to lcd panel + + patternProperties: + '^port@[0-4]$': + $ref: /schemas/graph.yaml#/properties/port + description: + On i.MX5, the internal two-input-multiplexer is used. Due to hardware + limitations, only one input port (port@[0,1]) can be used for each channel + (lvds-channel@[0,1], respectively). + On i.MX6, there should be four input ports (port@[0-3]) that correspond + to the four LVDS multiplexer inputs. + A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected + to a panel input port. Optionally, the output port can be left out if + display-timings are used instead. + + additionalProperties: false + +required: + - compatible + - gpr + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + + ldb@53fa8008 { + compatible = "fsl,imx53-ldb"; + reg = <0x53fa8008 0x4>; + #address-cells = <1>; + #size-cells = <0>; + gpr = <&gpr>; + clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", + "di0", "di1"; + + /* Using an of-graph endpoint link to connect the panel */ + lvds-channel@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&ipu_di0_lvds0>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + /* Using display-timings and fsl,data-mapping/width instead */ + lvds-channel@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + display-timings {/* ... */ + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&ipu_di1_lvds1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml new file mode 100644 index 000000000000..73bc73ff6e69 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-pre.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX PRE (Prefetch Resolve Engine) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,imx6qp-pre + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: axi + fsl,iram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle pointing to the mmio-sram device node, that should be + used for the PRE SRAM double buffer. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pre@21c8000 { + compatible = "fsl,imx6qp-pre"; + reg = <0x021c8000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; + clocks = <&clks IMX6QDL_CLK_PRE0>; + clock-names = "axi"; + fsl,iram = <&ocram2>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml new file mode 100644 index 000000000000..582da8c489f4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-prg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX PRG (Prefetch Resolve Gasket) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,imx6qp-prg + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: axi + + fsl,pres: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + description: + phandles to the PRE units attached to this PRG, with the fixed + PRE as the first entry and the muxable PREs following. + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + prg@21cc000 { + compatible = "fsl,imx6qp-prg"; + reg = <0x021cc000 0x1000>; + clocks = <&clks IMX6QDL_CLK_PRG0_APB>, <&clks IMX6QDL_CLK_PRG0_AXI>; + clock-names = "ipg", "axi"; + fsl,pres = <&pre1>, <&pre2>, <&pre3>; + }; + diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml new file mode 100644 index 000000000000..56da1636014c --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Video Interface + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The HDMI parallel video interface is a timing and sync generator block in the + i.MX8MP SoC, that sits between the video source and the HDMI TX controller. + +properties: + compatible: + const: fsl,imx8mp-hdmi-pvi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input from the LCDIF controller. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/imx8mp-power.h> + + display-bridge@32fc4000 { + compatible = "fsl,imx8mp-hdmi-pvi"; + reg = <0x32fc4000 0x44>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pvi_from_lcdif3: endpoint { + remote-endpoint = <&lcdif3_to_pvi>; + }; + }; + + port@1 { + reg = <1>; + pvi_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pvi>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt deleted file mode 100644 index 5bf77f6dd19d..000000000000 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ /dev/null @@ -1,162 +0,0 @@ -Freescale i.MX DRM master device -================================ - -The freescale i.MX DRM master device is a virtual device needed to list all -IPU or other display interface nodes that comprise the graphics subsystem. - -Required properties: -- compatible: Should be "fsl,imx-display-subsystem" -- ports: Should contain a list of phandles pointing to display interface ports - of IPU devices - -example: - -display-subsystem { - compatible = "fsl,display-subsystem"; - ports = <&ipu_di0>; -}; - - -Freescale i.MX IPUv3 -==================== - -Required properties: -- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of - - imx51 - - imx53 - - imx6q - - imx6qp -- reg: should be register base and length as documented in the - datasheet -- interrupts: Should contain sync interrupt and error interrupt, - in this order. -- resets: phandle pointing to the system reset controller and - reset line index, see reset/fsl,imx-src.txt for details -Additional required properties for fsl,imx6qp-ipu: -- fsl,prg: phandle to prg node associated with this IPU instance -Optional properties: -- port@[0-3]: Port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - Ports 0 and 1 should correspond to CSI0 and CSI1, - ports 2 and 3 should correspond to DI0 and DI1, respectively. - -example: - -ipu: ipu@18000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx53-ipu"; - reg = <0x18000000 0x080000000>; - interrupts = <11 10>; - resets = <&src 2>; - - ipu_di0: port@2 { - reg = <2>; - - ipu_di0_disp0: endpoint { - remote-endpoint = <&display_in>; - }; - }; -}; - -Freescale i.MX PRE (Prefetch Resolve Engine) -============================================ - -Required properties: -- compatible: should be "fsl,imx6qp-pre" -- reg: should be register base and length as documented in the - datasheet -- clocks : phandle to the PRE axi clock input, as described - in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. -- clock-names: should be "axi" -- interrupts: should contain the PRE interrupt -- fsl,iram: phandle pointing to the mmio-sram device node, that should be - used for the PRE SRAM double buffer. - -example: - -pre@21c8000 { - compatible = "fsl,imx6qp-pre"; - reg = <0x021c8000 0x1000>; - interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; - clocks = <&clks IMX6QDL_CLK_PRE0>; - clock-names = "axi"; - fsl,iram = <&ocram2>; -}; - -Freescale i.MX PRG (Prefetch Resolve Gasket) -============================================ - -Required properties: -- compatible: should be "fsl,imx6qp-prg" -- reg: should be register base and length as documented in the - datasheet -- clocks : phandles to the PRG ipg and axi clock inputs, as described - in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. -- clock-names: should be "ipg" and "axi" -- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed - PRE as the first entry and the muxable PREs following. - -example: - -prg@21cc000 { - compatible = "fsl,imx6qp-prg"; - reg = <0x021cc000 0x1000>; - clocks = <&clks IMX6QDL_CLK_PRG0_APB>, - <&clks IMX6QDL_CLK_PRG0_AXI>; - clock-names = "ipg", "axi"; - fsl,pres = <&pre1>, <&pre2>, <&pre3>; -}; - -Parallel display support -======================== - -Required properties: -- compatible: Should be "fsl,imx-parallel-display" -Optional properties: -- interface-pix-fmt: How this display is connected to the - display interface. Currently supported types: "rgb24", "rgb565", "bgr666" - and "lvds666". -- edid: verbatim EDID data block describing attached display. -- ddc: phandle describing the i2c bus handling the display data - channel -- port@[0-1]: Port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - Port 0 is the input port connected to the IPU display interface, - port 1 is the output port connected to a panel. - -example: - -disp0 { - compatible = "fsl,imx-parallel-display"; - edid = [edid-data]; - interface-pix-fmt = "rgb24"; - - port@0 { - reg = <0>; - - display_in: endpoint { - remote-endpoint = <&ipu_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - -panel { - ... - - port { - panel_in: endpoint { - remote-endpoint = <&display_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt deleted file mode 100644 index 6d021e71c9cf..000000000000 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ /dev/null @@ -1,65 +0,0 @@ -Freescale i.MX6 DWC HDMI TX Encoder -=================================== - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". -- reg: See dw_hdmi.txt. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, - numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. - Each port shall have a single endpoint. -- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI - multiplexer control register. - -Optional properties - -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master - or the functionally-reduced I2C master contained in the DWC HDMI. When - connected to a system I2C master this property contains a phandle to that - I2C master controller. - - -Example: - - gpr: iomuxc-gpr@20e0000 { - /* ... */ - }; - - hdmi: hdmi@120000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-hdmi"; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; - clock-names = "iahb", "isfr"; - ddc-i2c-bus = <&i2c2>; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt deleted file mode 100644 index 38c637fa39dd..000000000000 --- a/Documentation/devicetree/bindings/display/imx/ldb.txt +++ /dev/null @@ -1,147 +0,0 @@ -Device-Tree bindings for LVDS Display Bridge (ldb) - -LVDS Display Bridge -=================== - -The LVDS Display Bridge device tree node contains up to two lvds-channel -nodes describing each of the two LVDS encoder channels of the bridge. - -Required properties: - - #address-cells : should be <1> - - #size-cells : should be <0> - - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb". - Both LDB versions are similar, but i.MX6 has an additional - multiplexer in the front to select any of the four IPU display - interfaces as input for each LVDS channel. - - gpr : should be <&gpr> on i.MX53 and i.MX6q. - The phandle points to the iomuxc-gpr region containing the LVDS - control register. -- clocks, clock-names : phandles to the LDB divider and selector clocks and to - the display interface selector clocks, as described in - Documentation/devicetree/bindings/clock/clock-bindings.txt - The following clocks are expected on i.MX53: - "di0_pll" - LDB LVDS channel 0 mux - "di1_pll" - LDB LVDS channel 1 mux - "di0" - LDB LVDS channel 0 gate - "di1" - LDB LVDS channel 1 gate - "di0_sel" - IPU1 DI0 mux - "di1_sel" - IPU1 DI1 mux - On i.MX6q the following additional clocks are needed: - "di2_sel" - IPU2 DI0 mux - "di3_sel" - IPU2 DI1 mux - The needed clock numbers for each are documented in - Documentation/devicetree/bindings/clock/imx5-clock.txt, and in - Documentation/devicetree/bindings/clock/imx6q-clock.txt. - -Optional properties: - - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q - - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53, - not used on i.MX6q - - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should - be configured - one input will be distributed on both outputs in dual - channel mode - -LVDS Channel -============ - -Each LVDS Channel has to contain either an of graph link to a panel device node -or a display-timings node that describes the video timings for the connected -LVDS display as well as the fsl,data-mapping and fsl,data-width properties. - -Required properties: - - reg : should be <0> or <1> - - port: Input and output port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/graph.txt. - On i.MX5, the internal two-input-multiplexer is used. Due to hardware - limitations, only one input port (port@[0,1]) can be used for each channel - (lvds-channel@[0,1], respectively). - On i.MX6, there should be four input ports (port@[0-3]) that correspond - to the four LVDS multiplexer inputs. - A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected - to a panel input port. Optionally, the output port can be left out if - display-timings are used instead. - -Optional properties (required if display-timings are used): - - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - - display-timings : A node that describes the display timings as defined in - Documentation/devicetree/bindings/display/panel/display-timing.txt. - - fsl,data-mapping : should be "spwg" or "jeida" - This describes how the color bits are laid out in the - serialized LVDS signal. - - fsl,data-width : should be <18> or <24> - -example: - -gpr: iomuxc-gpr@53fa8000 { - /* ... */ -}; - -ldb: ldb@53fa8008 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx53-ldb"; - gpr = <&gpr>; - clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, - <&clks IMX5_CLK_LDB_DI1_SEL>, - <&clks IMX5_CLK_IPU_DI0_SEL>, - <&clks IMX5_CLK_IPU_DI1_SEL>, - <&clks IMX5_CLK_LDB_DI0_GATE>, - <&clks IMX5_CLK_LDB_DI1_GATE>; - clock-names = "di0_pll", "di1_pll", - "di0_sel", "di1_sel", - "di0", "di1"; - - /* Using an of-graph endpoint link to connect the panel */ - lvds-channel@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - port@0 { - reg = <0>; - - lvds0_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; - }; - }; - - port@2 { - reg = <2>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - - /* Using display-timings and fsl,data-mapping/width instead */ - lvds-channel@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - - display-timings { - /* ... */ - }; - - port@1 { - reg = <1>; - - lvds1_in: endpoint { - remote-endpoint = <&ipu_di1_lvds1>; - }; - }; - }; -}; - -panel: lvds-panel { - /* ... */ - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml new file mode 100644 index 000000000000..4ae6328cde64 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: iMX8MQ Display Controller Subsystem (DCSS) + +maintainers: + - Laurentiu Palcu <laurentiu.palcu@nxp.com> + +description: + + The DCSS (display controller sub system) is used to source up to three + display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP + 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10 + image processing capabilities are included to provide a solution capable of + driving next generation high dynamic range displays. + +properties: + compatible: + const: nxp,imx8mq-dcss + + reg: + items: + - description: DCSS base address and size, up to IRQ steer start + - description: DCSS BLKCTL base address and size + + interrupts: + items: + - description: Context loader completion and error interrupt + - description: DTG interrupt used to signal context loader trigger time + - description: DTG interrupt for Vblank + + interrupt-names: + items: + - const: ctxld + - const: ctxld_kick + - const: vblank + + clocks: + items: + - description: Display APB clock for all peripheral PIO access interfaces + - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL + - description: RTRAM clock + - description: Pixel clock, can be driven either by HDMI phy clock or MIPI + - description: DTRC clock, needed by video decompressor + + clock-names: + items: + - const: apb + - const: axi + - const: rtrm + - const: pix + - const: dtrc + + assigned-clocks: + items: + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT + - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM + - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or + IMX8MQ_VIDEO_PLL1_REF_SEL + + assigned-clock-parents: + items: + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M + - description: Phandle and clock specifier of IMX8MQ_CLK_27M + + assigned-clock-rates: + items: + - description: Must be 800 MHz + - description: Must be 400 MHz + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node pointing to the input port of a HDMI/DP or MIPI display bridge. + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + dcss: display-controller@32e00000 { + compatible = "nxp,imx8mq-dcss"; + reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>; + interrupts = <6>, <8>, <9>; + interrupt-names = "ctxld", "ctxld_kick", "vblank"; + interrupt-parent = <&irqsteer>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>, + <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>, + <&clk IMX8MQ_CLK_DISP_DTRC>; + clock-names = "apb", "axi", "rtrm", "pix", "dtrc"; + assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>, + <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_CLK_27M>; + assigned-clock-rates = <800000000>, + <400000000>; + port { + dcss_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; |