1 files changed, 0 insertions, 86 deletions
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
deleted file mode 100644
index 472e1ea6c591..000000000000
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-* Freescale MXS LCD Interface (LCDIF)
-
-New bindings:
-=============
-Required properties:
-- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
-		Should be "fsl,imx28-lcdif" for i.MX28.
-		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
-- reg:		Address and length of the register set for LCDIF
-- interrupts:	Should contain LCDIF interrupt
-- clocks:	A list of phandle + clock-specifier pairs, one for each
-		entry in 'clock-names'.
-- clock-names:	A list of clock names. For MXSFB it should contain:
-    - "pix" for the LCDIF block clock
-    - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
-
-Required sub-nodes:
-  - port: The connection to an encoder chip.
-
-Example:
-
-	lcdif1: display-controller@2220000 {
-		compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
-		reg = <0x02220000 0x4000>;
-		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
-			 <&clks IMX6SX_CLK_LCDIF_APB>,
-			 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-		clock-names = "pix", "axi", "disp_axi";
-
-		port {
-			parallel_out: endpoint {
-				remote-endpoint = <&panel_in_parallel>;
-			};
-		};
-	};
-
-Deprecated bindings:
-====================
-Required properties:
-- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
-		Should be "fsl,imx28-lcdif" for i.MX28.
-- reg:		Address and length of the register set for LCDIF
-- interrupts:	Should contain LCDIF interrupts
-- display:	phandle to display node (see below for details)
-
-* display node
-
-Required properties:
-- bits-per-pixel:	<16> for RGB565, <32> for RGB888/666.
-- bus-width:		number of data lines.  Could be <8>, <16>, <18> or <24>.
-
-Required sub-node:
-- display-timings:	Refer to binding doc display-timing.txt for details.
-
-Examples:
-
-lcdif@80030000 {
-	compatible = "fsl,imx28-lcdif";
-	reg = <0x80030000 2000>;
-	interrupts = <38 86>;
-
-	display: display {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <164>;
-				hback-porch = <89>;
-				hsync-len = <10>;
-				vback-porch = <23>;
-				vfront-porch = <10>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};