diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display')
33 files changed, 649 insertions, 76 deletions
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt index 057b81335775..c65fd7a7467c 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt @@ -67,6 +67,8 @@ Required properties: Optional properties: - power-domains: Optional phandle to associated power domain as described in the file ../power/power_domain.txt +- amlogic,canvas: phandle to canvas provider node as described in the file + ../soc/amlogic/amlogic,canvas.txt Required nodes: diff --git a/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt b/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt new file mode 100644 index 000000000000..aaa6c24c8e70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt @@ -0,0 +1,33 @@ +Meson specific Simple Framebuffer bindings + +This binding documents meson specific extensions to the simple-framebuffer +bindings. The meson simplefb u-boot code relies on the devicetree containing +pre-populated simplefb nodes. + +These extensions are intended so that u-boot can select the right node based +on which pipeline is being used. As such they are solely intended for +firmware / bootloader use, and the OS should ignore them. + +Required properties: +- compatible: "amlogic,simple-framebuffer", "simple-framebuffer" +- amlogic,pipeline, one of: + "vpu-cvbs" + "vpu-hdmi" + +Example: + +chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + power-domains = <&pwrc_vpu>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt new file mode 100644 index 000000000000..02b226532ebd --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,komeda.txt @@ -0,0 +1,73 @@ +Device Tree bindings for Arm Komeda display driver + +Required properties: +- compatible: Should be "arm,mali-d71" +- reg: Physical base address and length of the registers in the system +- interrupts: the interrupt line number of the device in the system +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: A list of clock names. It should contain: + - "mclk": for the main processor clock + - "pclk": for the APB interface clock +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Required properties for sub-node: pipeline@nq +Each device contains one or two pipeline sub-nodes (at least one), each +pipeline node should provide properties: +- reg: Zero-indexed identifier for the pipeline +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: should contain: + - "pxclk": pixel clock + - "aclk": AXI interface clock + +- port: each pipeline connect to an encoder input port. The connection is + modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer may + be located anywhere in memory. + +Example: +/ { + ... + + dp0: display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <0 168 4>; + clocks = <&dpu_mclk>, <&dpu_aclk>; + clock-names = "mclk", "pclk"; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt index ef89ab46b2c9..572fa2773ec4 100644 --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt +++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt @@ -1,6 +1,6 @@ * ARM PrimeCell Color LCD Controller PL110/PL111 -See also Documentation/devicetree/bindings/arm/primecell.txt +See also Documentation/devicetree/bindings/arm/primecell.yaml Required properties: diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt index f5725bb6c61c..525a4bfd8634 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt +++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt @@ -31,28 +31,7 @@ Required subnodes: - one subnode per DSI device connected on the DSI bus. Each DSI device should contain a reg property encoding its virtual channel. -Cadence DPHY -============ - -Cadence DPHY block. - -Required properties: -- compatible: should be set to "cdns,dphy". -- reg: physical base address and length of the DPHY registers. -- clocks: DPHY reference clocks. -- clock-names: must contain "psm" and "pll_ref". -- #phy-cells: must be set to 0. - - Example: - dphy0: dphy@fd0e0000{ - compatible = "cdns,dphy"; - reg = <0x0 0xfd0e0000 0x0 0x1000>; - clocks = <&psm_clk>, <&pll_ref_clk>; - clock-names = "psm", "pll_ref"; - #phy-cells = <0>; - }; - dsi0: dsi@fd0c0000 { compatible = "cdns,dsi"; reg = <0x0 0xfd0c0000 0x0 0x1000>; diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt index 50220190c203..60091db5dfa5 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt @@ -22,13 +22,11 @@ among others. Required properties: -- compatible: Must be one or more of the following - - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer - - "lvds-encoder" for a generic LVDS encoder device +- compatible: Must be "lvds-encoder" - When compatible with the generic version, nodes must list the - device-specific version corresponding to the device first - followed by the generic version. + Any encoder compatible with this generic binding, but with additional + properties not listed here, must list a device specific compatible first + followed by this generic compatible. Required nodes: @@ -44,8 +42,6 @@ Example lvds-encoder { compatible = "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt index 3aeb0ec06fd0..900a884ad9f5 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt @@ -8,11 +8,14 @@ Required properties: - compatible : Shall contain one of - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders + - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders + - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders + - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders - "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders - "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders @@ -24,7 +27,7 @@ Required properties: - clock-names: Name of the clocks. This property is model-dependent. - The functional clock, which mandatory for all models, shall be listed first, and shall be named "fck". - - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or + - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN numerical index. diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt index 527e236e9a2a..fee3c88e1a17 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt @@ -10,7 +10,7 @@ Required properties: Optional properties: -- pwdn-gpios: Power down control GPIO +- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low). Required nodes: diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt new file mode 100644 index 000000000000..e575f996959a --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt @@ -0,0 +1,55 @@ +Texas Instruments FPD-Link (LVDS) Serializer +-------------------------------------------- + +The DS90C185 and DS90C187 are low-power serializers for portable +battery-powered applications that reduces the size of the RGB +interface between the host GPU and the display. + +Required properties: + +- compatible: Should be + "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer + "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer + +Optional properties: + +- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) + +Required nodes: + +The devices have two video ports. Their connections are modeled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for parallel input +- Video port 1 for LVDS output + + +Example +------- + +lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&lcdc_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt new file mode 100644 index 000000000000..e641f664763d --- /dev/null +++ b/Documentation/devicetree/bindings/display/himax,hx8357d.txt @@ -0,0 +1,26 @@ +Himax HX8357D display panels + +This binding is for display panels using a Himax HX8357D controller in SPI +mode, such as the Adafruit 3.5" TFT for Raspberry Pi. + +Required properties: +- compatible: "adafruit,yx350hv15", "himax,hx8357d" +- dc-gpios: D/C pin +- reg: address of the panel on the SPI bus + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "adafruit,yx350hv15", "himax,hx8357d"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <90>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index dfc743219bd8..9ae946942720 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -106,6 +106,7 @@ Required properties: - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: * "iface" + * "ref" (only required for new DTS files/entries) For 28nm HPM/LP, 28nm 8960 PHYs: - vddio-supply: phandle to vdd-io regulator device node For 20nm PHY: diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt new file mode 100644 index 000000000000..3439b38e60f2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt @@ -0,0 +1,59 @@ +Qualcomm adreno/snapdragon GMU (Graphics management unit) + +The GMU is a programmable power controller for the GPU. the CPU controls the +GMU which in turn handles power controls for the GPU. + +Required properties: +- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu" + for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" + Note that you need to list the less specific "qcom,adreno-gmu" + for generic matches and the more specific identifier to identify + the specific device. +- reg: Physical base address and length of the GMU registers. +- reg-names: Matching names for the register regions + * "gmu" + * "gmu_pdc" + * "gmu_pdc_seg" +- interrupts: The interrupt signals from the GMU. +- interrupt-names: Matching names for the interrupts + * "hfi" + * "gmu" +- clocks: phandles to the device clocks +- clock-names: Matching names for the clocks + * "gmu" + * "cxo" + * "axi" + * "mnoc" +- power-domains: should be <&clock_gpucc GPU_CX_GDSC> +- iommus: phandle to the adreno iommu +- operating-points-v2: phandle to the OPP operating points + +Example: + +/ { + ... + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb280000 0x10000>, + <0xb480000 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>; + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 43fac0fe09bb..aad1aef682f7 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -1,21 +1,32 @@ Qualcomm adreno/snapdragon GPU Required properties: -- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" +- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or + "amd,imageon-XYZ.W", "amd,imageon" for example: "qcom,adreno-306.0", "qcom,adreno" Note that you need to list the less specific "qcom,adreno" (since this is what the device is matched on), in addition to the more specific with the chip-id. + If "amd,imageon" is used, there should be no top level msm device. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. -- clocks: device clocks +- clocks: device clocks (if applicable) See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required: +- clock-names: the following clocks are required by a3xx, a4xx and a5xx + cores: * "core" * "iface" * "mem_iface" + For GMU attached devices the GPU clocks are not used and are not required. The + following devices should not list clocks: + - qcom,adreno-630.2 +- iommus: optional phandle to an adreno iommu instance +- operating-points-v2: optional phandle to the OPP operating points +- qcom,gmu: For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. Applicable targets: + - qcom,adreno-630.2 -Example: +Example 3xx/4xx/a5xx: / { ... @@ -25,7 +36,6 @@ Example: reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <GIC_SPI 80 0>; - interrupt-names = "kgsl_3d0_irq"; clock-names = "core", "iface", @@ -36,3 +46,30 @@ Example: <&mmcc MMSS_IMEM_AHB_CLK>; }; }; + +Example a6xx (with GMU): + +/ { + ... + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt index 3c341a15ccdc..b07eeb38f709 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp4.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp4.txt @@ -38,6 +38,8 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: * "lut_clk" +- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be + used for LCDC. This is only valid for 18bpp panels. Example: diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt new file mode 100644 index 000000000000..bc6a0c858e23 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010.txt @@ -0,0 +1,12 @@ +AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel + +Required properties: +- compatible: should be "auo,g101evn010" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt new file mode 100644 index 000000000000..35bc0c839f49 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt @@ -0,0 +1,12 @@ +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel + +Required properties: +- compatible: should be "bananapi,s070wv20-ct16" +- power-supply: see ./panel-common.txt + +Optional properties: +- enable-gpios: see ./simple-panel.txt +- backlight: see ./simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in ./simple-panel.txt. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt new file mode 100644 index 000000000000..057f7f3f6dbe --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/cdtech,s043wq26h-ct7.txt @@ -0,0 +1,12 @@ +CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel + +Required properties: +- compatible: should be "cdtech,s043wq26h-ct7" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt new file mode 100644 index 000000000000..505615dfa0df --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/cdtech,s070wv95-ct16.txt @@ -0,0 +1,12 @@ +CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel + +Required properties: +- compatible: should be "cdtech,s070wv95-ct16" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt new file mode 100644 index 000000000000..fbf5dcd15661 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc1010gig.txt @@ -0,0 +1,12 @@ +DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel + +Required properties: +- compatible: should be "dlc,dlc1010gig" +- power-supply: See simple-panel.txt + +Optional properties: +- enable-gpios: See simple-panel.txt +- backlight: See simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt new file mode 100644 index 000000000000..e5ca4ccd55ed --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.txt @@ -0,0 +1,7 @@ +Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel + +Required properties: +- compatible: should be "innolux,ee101ia-01d" + +This binding is compatible with the lvds-panel binding, which is specified +in panel-lvds.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt new file mode 100644 index 000000000000..74ee7ea6b493 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lemaker,bl035-rgb-002.txt @@ -0,0 +1,12 @@ +LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + +Required properties: +- compatible: should be "lemaker,bl035-rgb-002" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt new file mode 100644 index 000000000000..a89f9c830a85 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt @@ -0,0 +1,42 @@ +Binding for Olimex Ltd. LCD-OLinuXino bridge panel. + +This device can be used as bridge between a host controller and LCD panels. +Currently supported LCDs are: + - LCD-OLinuXino-4.3TS + - LCD-OLinuXino-5 + - LCD-OLinuXino-7 + - LCD-OLinuXino-10 + +The panel itself contains: + - AT24C16C EEPROM holding panel identification and timing requirements + - AR1021 resistive touch screen controller (optional) + - FT5x6 capacitive touch screnn controller (optional) + - GT911/GT928 capacitive touch screen controller (optional) + +The above chips share same I2C bus. The EEPROM is factory preprogrammed with +device information (id, serial, etc.) and timing requirements. + +Touchscreen bingings can be found in these files: + - input/touchscreen/goodix.txt + - input/touchscreen/edt-ft5x06.txt + - input/touchscreen/ar1021.txt + +Required properties: + - compatible: should be "olimex,lcd-olinuxino" + - reg: address of the configuration EEPROM, should be <0x50> + - power-supply: phandle of the regulator that provides the supply voltage + +Optional properties: + - enable-gpios: GPIO pin to enable or disable the panel + - backlight: phandle of the backlight device attacked to the panel + +Example: +&i2c2 { + panel@50 { + compatible = "olimex,lcd-olinuxino"; + reg = <0x50>; + power-supply = <®_vcc5v0>; + enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt new file mode 100644 index 000000000000..1639fb17a9f0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.txt @@ -0,0 +1,14 @@ +PDA 91-00156-A0 5.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "pda,91-00156-a0" +- power-supply: this panel requires a single power supply. A phandle to a +regulator needs to be specified here. Compatible with panel-common binding which +is specified in the panel-common.txt in this directory. +- backlight: this panel's backlight is controlled by an external backlight +controller. A phandle to this controller needs to be specified here. +Compatible with panel-common binding which is specified in the panel-common.txt +in this directory. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt new file mode 100644 index 000000000000..b94e366f451b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt @@ -0,0 +1,30 @@ +Samsung S6D16D0 4" 864x480 AMOLED panel + +Required properties: + - compatible: should be: + "samsung,s6d16d0", + - reg: the virtual channel number of a DSI peripheral + - vdd1-supply: I/O voltage supply + - reset-gpios: a GPIO spec for the reset pin (active low) + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt new file mode 100644 index 000000000000..ccd17597f1f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt @@ -0,0 +1,30 @@ +Sitronix ST7701 based LCD panels + +ST7701 designed for small and medium sizes of TFT LCD display, is +capable of supporting up to 480RGBX864 in resolution. It provides +several system interfaces like MIPI/RGB/SPI. + +Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has +inbuilt ST7701 chip. + +Required properties: +- compatible: must be "sitronix,st7701" and one of + * "techstar,ts8550b" +- reset-gpios: a GPIO phandle for the reset pin + +Required properties for techstar,ts8550b: +- reg: DSI virtual channel used by that screen +- VCC-supply: analog regulator for MIPI circuit +- IOVCC-supply: I/O system regulator + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt index f5e3c6f2095a..40f3d7c713bb 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt @@ -1,47 +1,70 @@ TPO TPG110 Panel ================ -This binding builds on the DPI bindings, adding a few properties -as a superset of a DPI. See panel-dpi.txt for the required DPI -bindings. +This panel driver is a component that acts as an intermediary +between an RGB output and a variety of panels. The panel +driver is strapped up in electronics to the desired resolution +and other properties, and has a control interface over 3WIRE +SPI. By talking to the TPG110 over SPI, the strapped properties +can be discovered and the hardware is therefore mostly +self-describing. + + +--------+ +SPI -> | TPO | -> physical display +RGB -> | TPG110 | + +--------+ + +If some electrical strap or alternate resolution is desired, +this can be set up by taking software control of the display +over the SPI interface. The interface can also adjust +for properties of the display such as gamma correction and +certain electrical driving levels. + +The TPG110 does not know the physical dimensions of the panel +connected, so this needs to be specified in the device tree. + +It requires a GPIO line for control of its reset line. + +The serial protocol has line names that resemble I2C but the +protocol is not I2C but 3WIRE SPI. Required properties: -- compatible : "tpo,tpg110" +- compatible : one of: + "ste,nomadik-nhk15-display", "tpo,tpg110" + "tpo,tpg110" - grestb-gpios : panel reset GPIO -- scen-gpios : serial control enable GPIO -- scl-gpios : serial control clock line GPIO -- sda-gpios : serial control data line GPIO +- width-mm : see display/panel/panel-common.txt +- height-mm : see display/panel/panel-common.txt + +The device needs to be a child of an SPI bus, see +spi/spi-bus.txt. The SPI child must set the following +properties: +- spi-3wire +- spi-max-frequency = <3000000>; +as these are characteristics of this device. -Required nodes: -- Video port for DPI input, see panel-dpi.txt -- Panel timing for DPI setup, see panel-dpi.txt +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. Example ------- -panel { - compatible = "tpo,tpg110", "panel-dpi"; - grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; - scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; +panel: display@0 { + compatible = "tpo,tpg110"; + reg = <0>; + spi-3wire; + /* 320 ns min period ~= 3 MHz */ + spi-max-frequency = <3000000>; + /* Width and height from data sheet */ + width-mm = <116>; + height-mm = <87>; + grestb-gpios = <&foo_gpio 5 GPIO_ACTIVE_LOW>; backlight = <&bl>; port { nomadik_clcd_panel: endpoint { - remote-endpoint = <&nomadik_clcd_pads>; + remote-endpoint = <&foo>; }; }; - - panel-timing { - clock-frequency = <33200000>; - hactive = <800>; - hback-porch = <216>; - hfront-porch = <40>; - hsync-len = <1>; - vactive = <480>; - vback-porch = <35>; - vfront-porch = <10>; - vsync-len = <1>; - }; }; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 9de67be632d1..aedb22b4d161 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -4,7 +4,10 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU + - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU + - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU + - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -52,7 +55,10 @@ corresponding to each DU output. Port0 Port1 Port2 Port3 ----------------------------------------------------------------------------- R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - + R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - + R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - + R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index adc94fc3c9f8..39143424a474 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -13,6 +13,7 @@ Required properties: - compatible: should be one of the following: "rockchip,rk3288-dw-hdmi" + "rockchip,rk3328-dw-hdmi" "rockchip,rk3399-dw-hdmi" - reg: See dw_hdmi.txt. - reg-io-width: See dw_hdmi.txt. Shall be 4. @@ -34,6 +35,8 @@ Optional properties - clock-names: May contain "cec" as defined in dw_hdmi.txt. - clock-names: May contain "grf", power for grf io. - clock-names: May contain "vpll", external clock for some hdmi phy. +- phys: from general PHY binding: the phandle for the PHY device. +- phy-names: Should be "hdmi" if phys references an external phy. Example: diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt index b79e5769f0ae..4f58c5a2d195 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt @@ -10,6 +10,7 @@ Required properties: "rockchip,rk3126-vop"; "rockchip,px30-vop-lit"; "rockchip,px30-vop-big"; + "rockchip,rk3066-vop"; "rockchip,rk3188-vop"; "rockchip,rk3288-vop"; "rockchip,rk3368-vop"; diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt index f0a5090a3326..cd5c7186890a 100644 --- a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt @@ -20,7 +20,7 @@ Example: backlight: backlight { compatible = "gpio-backlight"; gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - } + }; ... diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 7854fff4fc16..31ab72cba3d4 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -79,6 +79,7 @@ Required properties: - compatible: value must be one of: * "allwinner,sun8i-a83t-dw-hdmi" * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi" + * "allwinner,sun50i-h6-dw-hdmi" - reg: base address and size of memory-mapped region - reg-io-width: See dw_hdmi.txt. Shall be 1. - interrupts: HDMI interrupt number @@ -86,9 +87,14 @@ Required properties: * iahb: the HDMI bus clock * isfr: the HDMI register clock * tmds: TMDS clock + * cec: HDMI CEC clock (H6 only) + * hdcp: HDCP clock (H6 only) + * hdcp-bus: HDCP bus clock (H6 only) - clock-names: the clock names mentioned above - - resets: phandle to the reset controller - - reset-names: must be "ctrl" + - resets: + * ctrl: HDMI controller reset + * hdcp: HDCP reset (H6 only) + - reset-names: reset names mentioned above - phys: phandle to the DWC HDMI PHY - phy-names: must be "phy" @@ -109,6 +115,7 @@ Required properties: * allwinner,sun8i-h3-hdmi-phy * allwinner,sun8i-r40-hdmi-phy * allwinner,sun50i-a64-hdmi-phy + * allwinner,sun50i-h6-hdmi-phy - reg: base address and size of memory-mapped region - clocks: phandles to the clocks feeding the HDMI PHY * bus: the HDMI PHY interface clock @@ -149,6 +156,7 @@ Required properties: * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon * allwinner,sun7i-a20-tcon + * allwinner,sun8i-a23-tcon * allwinner,sun8i-a33-tcon * allwinner,sun8i-a83t-tcon-lcd * allwinner,sun8i-a83t-tcon-tv @@ -158,6 +166,7 @@ Required properties: * allwinner,sun9i-a80-tcon-tv * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd" * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv" + * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. @@ -220,24 +229,26 @@ It allows display pipeline to be configured in very different ways: \ [3] TCON-TV1 [1] - TVE1/RGB Note that both TCON TOP references same physical unit. Both mixers can be -connected to any TCON. +connected to any TCON. Not all TCON TOP variants support all features. Required properties: - compatible: value must be one of: * allwinner,sun8i-r40-tcon-top + * allwinner,sun50i-h6-tcon-top - reg: base address and size of the memory-mapped region. - clocks: phandle to the clocks feeding the TCON TOP * bus: TCON TOP interface clock * tcon-tv0: TCON TV0 clock - * tve0: TVE0 clock - * tcon-tv1: TCON TV1 clock - * tve1: TVE0 clock - * dsi: MIPI DSI clock + * tve0: TVE0 clock (R40 only) + * tcon-tv1: TCON TV1 clock (R40 only) + * tve1: TVE0 clock (R40 only) + * dsi: MIPI DSI clock (R40 only) - clock-names: clock name mentioned above - resets: phandle to the reset line driving the TCON TOP - #clock-cells : must contain 1 - clock-output-names: Names of clocks created for TCON TV0 channel clock, - TCON TV1 channel clock and DSI channel clock, in that order. + TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in + that order. - ports: A ports node with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should @@ -266,6 +277,7 @@ Required properties: - compatible: value must be one of: * allwinner,sun6i-a31-drc * allwinner,sun6i-a31s-drc + * allwinner,sun8i-a23-drc * allwinner,sun8i-a33-drc * allwinner,sun9i-a80-drc - reg: base address and size of the memory-mapped region. @@ -293,6 +305,7 @@ Required properties: * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend * allwinner,sun7i-a20-display-backend + * allwinner,sun8i-a23-display-backend * allwinner,sun8i-a33-display-backend * allwinner,sun9i-a80-display-backend - reg: base address and size of the memory-mapped region. @@ -350,6 +363,7 @@ Required properties: * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend * allwinner,sun7i-a20-display-frontend + * allwinner,sun8i-a23-display-frontend * allwinner,sun8i-a33-display-frontend * allwinner,sun9i-a80-display-frontend - reg: base address and size of the memory-mapped region. @@ -381,6 +395,7 @@ Required properties: * allwinner,sun8i-v3s-de2-mixer * allwinner,sun50i-a64-de2-mixer-0 * allwinner,sun50i-a64-de2-mixer-1 + * allwinner,sun50i-h6-de3-mixer-0 - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the mixer * bus: the mixer interface clock @@ -408,6 +423,7 @@ Required properties: * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine * allwinner,sun7i-a20-display-engine + * allwinner,sun8i-a23-display-engine * allwinner,sun8i-a33-display-engine * allwinner,sun8i-a83t-display-engine * allwinner,sun8i-h3-display-engine @@ -415,9 +431,10 @@ Required properties: * allwinner,sun8i-v3s-display-engine * allwinner,sun9i-a80-display-engine * allwinner,sun50i-a64-display-engine + * allwinner,sun50i-h6-display-engine - allwinner,pipelines: list of phandle to the display engine - frontends (DE 1.0) or mixers (DE 2.0) available. + frontends (DE 1.0) or mixers (DE 2.0/3.0) available. Example: diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 593be44a53c9..9999255ac5b6 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -238,6 +238,9 @@ of the following host1x client modules: - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - nvidia,edid: supplies a binary EDID blob - nvidia,panel: phandle of a display panel + - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane + of the SOR, identified by the cell's index, is mapped via the crossbar to + the pad specified by the cell's value. Optional properties when driving an eDP output: - nvidia,dpaux: phandle to a DispayPort AUX interface diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt new file mode 100644 index 000000000000..f39c77ee36ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt @@ -0,0 +1,59 @@ +Truly model NT35597 DSI display driver + +The Truly NT35597 is a generic display driver, currently only configured +for use in the 2K display on the Qualcomm SDM845 MTP board. + +Required properties: +- compatible: should be "truly,nt35597-2K-display" +- vdda-supply: phandle of the regulator that provides the supply voltage + Power IC supply +- vdispp-supply: phandle of the regulator that provides the supply voltage + for positive LCD bias +- vdispn-supply: phandle of the regulator that provides the supply voltage + for negative LCD bias +- reset-gpios: phandle of gpio for reset line + This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names + (active low) +- mode-gpios: phandle of the gpio for choosing the mode of the display + for single DSI or Dual DSI + This should be low for dual DSI and high for single DSI mode +- ports: This device has two video ports driven by two DSIs. Their connections + are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + - port@0: DSI input port driven by master DSI + - port@1: DSI input port driven by secondary DSI + +Example: + + dsi@ae94000 { + panel@0 { + compatible = "truly,nt35597-2K-display"; + reg = <0>; + vdda-supply = <&pm8998_l14>; + vdispp-supply = <&lab_regulator>; + vdispn-supply = <&ibb_regulator>; + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&dpu_dsi_active>; + pinctrl-1 = <&dpu_dsi_suspend>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel1_in: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; |