diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display')
4 files changed, 219 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 3624363938dd..eda427ddca1b 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -46,9 +46,13 @@ properties: # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel - auo,b116xw03 # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel + - auo,b133han05 + # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel - auo,b133htn01 # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel - auo,b133xtn01 + # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel + - auo,b140han06 # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel - auo,g070vvn01 # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel @@ -208,8 +212,14 @@ properties: - logictechno,lt161010-2nhr # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod. - logictechno,lt170410-2whc + # Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module + - logictechno,lttd800480070-l2rt + # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module + - logictechno,lttd800480070-l6wh-rt # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel - mitsubishi,aa070mc01-ca1 + # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod. + - multi-inno,mi1010ait-1cp # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel - nec,nl12880bc20-05 # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 151be3bba06f..39792f051d2d 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -23,6 +23,7 @@ Required properties: Optional properties: - phys: from general PHY binding: the phandle for the PHY device. - phy-names: Should be "dphy" if phys references an external phy. +- #phy-cells: Defined when used as ISP phy, should be 0. - power-domains: a phandle to mipi dsi power domain node. - resets: list of phandle + reset specifier pairs, as described in [3]. - reset-names: string reset name, must be "apb". diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml new file mode 100644 index 000000000000..2ed2a7d0ca2f --- /dev/null +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Solomon SSD1307 OLED Controller Framebuffer + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - solomon,ssd1305fb-i2c + - solomon,ssd1306fb-i2c + - solomon,ssd1307fb-i2c + - solomon,ssd1309fb-i2c + + reg: + maxItems: 1 + + pwms: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vbat-supply: + description: The supply for VBAT + + solomon,height: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 16 + description: + Height in pixel of the screen driven by the controller + + solomon,width: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 96 + description: + Width in pixel of the screen driven by the controller + + solomon,page-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + description: + Offset of pages (band of 8 pixels) that the screen is mapped to + + solomon,segment-no-remap: + type: boolean + description: + Display needs normal (non-inverted) data column to segment mapping + + solomon,col-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Offset of columns (COL/SEG) that the screen is mapped to + + solomon,com-seq: + type: boolean + description: + Display uses sequential COM pin configuration + + solomon,com-lrremap: + type: boolean + description: + Display uses left-right COM pin remap + + solomon,com-invdir: + type: boolean + description: + Display uses inverted COM pin scan direction + + solomon,com-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Number of the COM pin wired to the first display line + + solomon,prechargep1: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Length of deselect period (phase 1) in clock cycles + + solomon,prechargep2: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: + Length of precharge period (phase 2) in clock cycles. This needs to be + the higher, the higher the capacitance of the OLED's pixels is. + + solomon,dclk-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 16 + description: + Clock divisor. The default value is controller-dependent. + + solomon,dclk-frq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Clock frequency, higher value means higher frequency. + The default value is controller-dependent. + + solomon,lookup-table: + $ref: /schemas/types.yaml#/definitions/uint8-array + maxItems: 4 + description: + 8 bit value array of current drive pulse widths for BANK0, and colors A, + B, and C. Each value in range of 31 to 63 for pulse widths of 32 to 64. + Color D is always width 64. + + solomon,area-color-enable: + type: boolean + description: + Display uses color mode + + solomon,low-power: + type: boolean + description: + Display runs in low power mode + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: solomon,ssd1305fb-i2c + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 7 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1306fb-i2c + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 8 + + - if: + properties: + compatible: + contains: + const: solomon,ssd1307fb-i2c + then: + properties: + solomon,dclk-div: + default: 2 + solomon,dclk-frq: + default: 12 + required: + - pwms + + - if: + properties: + compatible: + contains: + const: solomon,ssd1309fb-i2c + then: + properties: + solomon,dclk-div: + default: 1 + solomon,dclk-frq: + default: 10 + +additionalProperties: false + +examples: + - | + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + }; + + ssd1306: oled@3d { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt deleted file mode 100644 index 2dcb6d12d137..000000000000 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Solomon SSD1307 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for - now is i2c, and the supported chips are ssd1305, ssd1306, ssd1307 and - ssd1309. - - reg: Should contain address of the controller on the I2C bus. Most likely - 0x3c or 0x3d - - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0]. Only required for the ssd1307. - - solomon,height: Height in pixel of the screen driven by the controller - - solomon,width: Width in pixel of the screen driven by the controller - - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is - mapped to. - -Optional properties: - - reset-gpios: The GPIO used to reset the OLED display, if available. See - Documentation/devicetree/bindings/gpio/gpio.txt for details. - - vbat-supply: The supply for VBAT - - solomon,segment-no-remap: Display needs normal (non-inverted) data column - to segment mapping - - solomon,col-offset: Offset of columns (COL/SEG) that the screen is mapped to. - - solomon,com-seq: Display uses sequential COM pin configuration - - solomon,com-lrremap: Display uses left-right COM pin remap - - solomon,com-invdir: Display uses inverted COM pin scan direction - - solomon,com-offset: Number of the COM pin wired to the first display line - - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. - - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. - This needs to be the higher, the higher the capacitance - of the OLED's pixels is - - solomon,dclk-div: Clock divisor 1 to 16 - - solomon,dclk-frq: Clock frequency 0 to 15, higher value means higher - frequency - - solomon,lookup-table: 8 bit value array of current drive pulse widths for - BANK0, and colors A, B, and C. Each value in range - of 31 to 63 for pulse widths of 32 to 64. Color D - is always width 64. - - solomon,area-color-enable: Display uses color mode - - solomon,low-power. Display runs in low power mode - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt - -Examples: -ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; -}; - -ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; - solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>; -}; |