1 files changed, 68 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml b/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml
new file mode 100644
index 000000000000..a58dc407311b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/atmel,at91sam9g45-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Direct Memory Access Controller (DMA)
+
+maintainers:
+  - Ludovic Desroches <ludovic.desroches@microchip.com>
+
+description:
+  The Atmel Direct Memory Access Controller (DMAC) transfers data from a source
+  peripheral to a destination peripheral over one or more AMBA buses. One channel
+  is required for each source/destination pair. In the most basic configuration,
+  the DMAC has one master interface and one channel. The master interface reads
+  the data from a source and writes it to a destination. Two AMBA transfers are
+  required for each DMAC data transfer. This is also known as a dual-access transfer.
+  The DMAC is programmed via the APB interface.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9g45-dma
+      - atmel,at91sam9rl-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    description:
+      Must be <2>, used to represent the number of integer cells in the dma
+      property of client devices. The two cells in order are
+      1. The first cell represents the channel number.
+      2. The second cell is 0 for RX and 1 for TX transfers.
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dma_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-controller@ffffec00 {
+        compatible = "atmel,at91sam9g45-dma";
+        reg = <0xffffec00 0x200>;
+        interrupts = <21>;
+        #dma-cells = <2>;
+        clocks = <&pmc 2 20>;
+        clock-names = "dma_clk";
+    };
+
+...