1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
deleted file mode 100644
index da371c4d406c..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-qdma.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-NXP Layerscape SoC qDMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:		Must be one of
-			 "fsl,ls1021a-qdma": for LS1021A Board
-			 "fsl,ls1028a-qdma": for LS1028A Board
-			 "fsl,ls1043a-qdma": for ls1043A Board
-			 "fsl,ls1046a-qdma": for ls1046A Board
-- reg:			Should contain the register's base address and length.
-- interrupts:		Should contain a reference to the interrupt used by this
-			device.
-- interrupt-names:	Should contain interrupt names:
-			 "qdma-queue0": the block0 interrupt
-			 "qdma-queue1": the block1 interrupt
-			 "qdma-queue2": the block2 interrupt
-			 "qdma-queue3": the block3 interrupt
-			 "qdma-error":  the error interrupt
-- fsl,dma-queues:	Should contain number of queues supported.
-- dma-channels:	Number of DMA channels supported
-- block-number:	the virtual block number
-- block-offset:	the offset of different virtual block
-- status-sizes:	status queue size of per virtual block
-- queue-sizes:		command queue size of per virtual block, the size number
-			based on queues
-
-Optional properties:
-
-- dma-channels:		Number of DMA channels supported by the controller.
-- big-endian:		If present registers and hardware scatter/gather descriptors
-			of the qDMA are implemented in big endian mode, otherwise in little
-			mode.
-
-Examples:
-
-	qdma: dma-controller@8390000 {
-			compatible = "fsl,ls1021a-qdma";
-			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
-			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
-			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "qdma-error",
-				"qdma-queue0", "qdma-queue1";
-			dma-channels = <8>;
-			block-number = <2>;
-			block-offset = <0x1000>;
-			fsl,dma-queues = <2>;
-			status-sizes = <64>;
-			queue-sizes = <64 64>;
-			big-endian;
-		};
-
-DMA clients must use the format described in dma/dma.txt file.