summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/dma/stm32-dma.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/dma/stm32-dma.txt')
-rw-r--r--Documentation/devicetree/bindings/dma/stm32-dma.txt83
1 files changed, 0 insertions, 83 deletions
diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
deleted file mode 100644
index c5f519097204..000000000000
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* STMicroelectronics STM32 DMA controller
-
-The STM32 DMA is a general-purpose direct memory access controller capable of
-supporting 8 independent DMA channels. Each channel can have up to 8 requests.
-
-Required properties:
-- compatible: Should be "st,stm32-dma"
-- reg: Should contain DMA registers location and length. This should include
- all of the per-channel registers.
-- interrupts: Should contain all of the per-channel DMA interrupts in
- ascending order with respect to the DMA channel index.
-- clocks: Should contain the input clock of the DMA instance.
-- #dma-cells : Must be <4>. See DMA client paragraph for more details.
-
-Optional properties:
-- dma-requests : Number of DMA requests supported.
-- resets: Reference to a reset controller asserting the DMA controller
-- st,mem2mem: boolean; if defined, it indicates that the controller supports
- memory-to-memory transfer
-
-Example:
-
- dma2: dma-controller@40026400 {
- compatible = "st,stm32-dma";
- reg = <0x40026400 0x400>;
- interrupts = <56>,
- <57>,
- <58>,
- <59>,
- <60>,
- <68>,
- <69>,
- <70>;
- clocks = <&clk_hclk>;
- #dma-cells = <4>;
- st,mem2mem;
- resets = <&rcc 150>;
- dma-requests = <8>;
- };
-
-* DMA client
-
-DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a four-cell specifier for each
-channel: a phandle to the DMA controller plus the following four integer cells:
-
-1. The channel id
-2. The request line number
-3. A 32bit mask specifying the DMA channel configuration which are device
- dependent:
- -bit 9: Peripheral Increment Address
- 0x0: no address increment between transfers
- 0x1: increment address between transfers
- -bit 10: Memory Increment Address
- 0x0: no address increment between transfers
- 0x1: increment address between transfers
- -bit 15: Peripheral Increment Offset Size
- 0x0: offset size is linked to the peripheral bus width
- 0x1: offset size is fixed to 4 (32-bit alignment)
- -bit 16-17: Priority level
- 0x0: low
- 0x1: medium
- 0x2: high
- 0x3: very high
-4. A 32bit bitfield value specifying DMA features which are device dependent:
- -bit 0-1: DMA FIFO threshold selection
- 0x0: 1/4 full FIFO
- 0x1: 1/2 full FIFO
- 0x2: 3/4 full FIFO
- 0x3: full FIFO
-
-
-Example:
-
- usart1: serial@40011000 {
- compatible = "st,stm32-uart";
- reg = <0x40011000 0x400>;
- interrupts = <37>;
- clocks = <&clk_pclk2>;
- dmas = <&dma2 2 4 0x10400 0x3>,
- <&dma2 7 5 0x10200 0x3>;
- dma-names = "rx", "tx";
- };