summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/eeprom/at24.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/eeprom/at24.yaml')
-rw-r--r--Documentation/devicetree/bindings/eeprom/at24.yaml188
1 files changed, 188 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
new file mode 100644
index 000000000000..e8778560d966
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2019 BayLibre SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/eeprom/at24.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: I2C EEPROMs compatible with Atmel's AT24
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+select:
+ properties:
+ compatible:
+ contains:
+ pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+ required:
+ - compatible
+
+properties:
+ $nodename:
+ pattern: "^eeprom@[0-9a-f]{1,2}$"
+
+ # There are multiple known vendors who manufacture EEPROM chips compatible
+ # with Atmel's AT24. The compatible string requires either a single item
+ # if the memory comes from Atmel (in which case the vendor part must be
+ # 'atmel') or two items with the same 'model' part where the vendor part of
+ # the first one is the actual manufacturer and the second item is the
+ # corresponding 'atmel,<model>' from Atmel.
+ compatible:
+ oneOf:
+ - allOf:
+ - minItems: 1
+ maxItems: 2
+ items:
+ - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|mac)[0-9]+|spd)$"
+ - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+ - oneOf:
+ - items:
+ pattern: c00$
+ - items:
+ pattern: c01$
+ - items:
+ pattern: cs01$
+ - items:
+ pattern: c02$
+ - items:
+ pattern: cs02$
+ - items:
+ pattern: mac402$
+ - items:
+ pattern: mac602$
+ - items:
+ pattern: c04$
+ - items:
+ pattern: cs04$
+ - items:
+ pattern: c08$
+ - items:
+ pattern: cs08$
+ - items:
+ pattern: c16$
+ - items:
+ pattern: cs16$
+ - items:
+ pattern: c32$
+ - items:
+ pattern: cs32$
+ - items:
+ pattern: c64$
+ - items:
+ pattern: cs64$
+ - items:
+ pattern: c128$
+ - items:
+ pattern: cs128$
+ - items:
+ pattern: c256$
+ - items:
+ pattern: cs256$
+ - items:
+ pattern: c512$
+ - items:
+ pattern: cs512$
+ - items:
+ pattern: c1024$
+ - items:
+ pattern: cs1024$
+ - items:
+ pattern: c2048$
+ - items:
+ pattern: cs2048$
+ - items:
+ pattern: spd$
+ # These are special cases that don't conform to the above pattern.
+ # Each requires a standard at24 model as fallback.
+ - items:
+ - const: rohm,br24t01
+ - const: atmel,24c01
+ - items:
+ - const: nxp,se97b
+ - const: atmel,24c02
+ - items:
+ - const: renesas,r1ex24002
+ - const: atmel,24c02
+ - items:
+ - const: renesas,r1ex24016
+ - const: atmel,24c16
+ - items:
+ - const: giantec,gt24c32a
+ - const: atmel,24c32
+ - items:
+ - const: renesas,r1ex24128
+ - const: atmel,24c128
+
+ reg:
+ maxItems: 1
+
+ pagesize:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The length of the pagesize for writing. Please consult the
+ manual of your device, that value varies a lot. A wrong value
+ may result in data loss! If not specified, a safety value of
+ '1' is used which will be very slow.
+ enum: [ 1, 8, 16, 32, 64, 128, 258 ]
+ default: 1
+
+ read-only:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Disables writes to the eeprom.
+
+ size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Total eeprom size in bytes.
+
+ no-read-rollover:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Indicates that the multi-address eeprom does not automatically roll
+ over reads to the next slave address. Please consult the manual of
+ your device.
+
+ wp-gpios:
+ description:
+ GPIO to which the write-protect pin of the chip is connected.
+ maxItems: 1
+
+ address-width:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of address bits.
+ default: 8
+ enum: [ 8, 16 ]
+
+ num-addresses:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Total number of i2c slave addresses this device takes.
+ default: 1
+ minimum: 1
+ maximum: 8
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "microchip,24c32", "atmel,24c32";
+ reg = <0x52>;
+ pagesize = <32>;
+ wp-gpios = <&gpio1 3 0>;
+ num-addresses = <8>;
+ };
+ };
+...