diff options
Diffstat (limited to 'Documentation/devicetree/bindings/firmware')
4 files changed, 136 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 5c4c6782e052..948e2a38beed 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -38,6 +38,9 @@ properties: The virtio transport only supports a single device. items: - const: arm,scmi-virtio + - description: SCMI compliant firmware with OP-TEE transport + items: + - const: linaro,scmi-optee interrupts: description: @@ -78,11 +81,24 @@ properties: '#size-cells': const: 0 + atomic-threshold-us: + description: + An optional time value, expressed in microseconds, representing, on this + platform, the threshold above which any SCMI command, advertised to have + an higher-than-threshold execution latency, should not be considered for + atomic mode of operation, even if requested. + default: 0 + arm,smc-id: $ref: /schemas/types.yaml#/definitions/uint32 description: SMC id required when using smc or hvc transports + linaro,optee-channel-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Channel specifier required when using OP-TEE transport. + protocol@11: type: object properties: @@ -195,6 +211,12 @@ patternProperties: minItems: 1 maxItems: 2 + linaro,optee-channel-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Channel specifier required when using OP-TEE transport and + protocol has a dedicated communication channel. + required: - reg @@ -226,6 +248,16 @@ else: - arm,smc-id - shmem + else: + if: + properties: + compatible: + contains: + const: linaro,scmi-optee + then: + required: + - linaro,optee-channel-id + examples: - | firmware { @@ -240,6 +272,8 @@ examples: #address-cells = <1>; #size-cells = <0>; + atomic-threshold-us = <10000>; + scmi_devpd: protocol@11 { reg = <0x11>; #power-domain-cells = <1>; @@ -330,7 +364,7 @@ examples: firmware { scmi { compatible = "arm,scmi-smc"; - shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; arm,smc-id = <0xc3000001>; #address-cells = <1>; @@ -340,7 +374,48 @@ examples: reg = <0x11>; #power-domain-cells = <1>; }; + }; + }; + + - | + firmware { + scmi { + compatible = "linaro,scmi-optee"; + linaro,optee-channel-id = <0>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_dvfs1: protocol@13 { + reg = <0x13>; + linaro,optee-channel-id = <1>; + shmem = <&cpu_optee_lpri0>; + #clock-cells = <1>; + }; + + scmi_clk0: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + sram@51000000 { + compatible = "mmio-sram"; + reg = <0x0 0x51000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x51000000 0x10000>; + + cpu_optee_lpri0: optee-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; }; }; diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml index 23b346bd1252..1f9322925e7c 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml @@ -43,6 +43,7 @@ properties: by remote SCP firmware for use by SCPI message protocol should be specified in any order. minItems: 1 + maxItems: 4 shmem: description: @@ -51,6 +52,7 @@ properties: be any memory reserved for the purpose of this communication between the processors. minItems: 1 + maxItems: 4 power-controller: type: object @@ -235,8 +237,8 @@ examples: firmware { scpi { compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; - mboxes = <&mailbox 1 &mailbox 2>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + mboxes = <&mailbox 1>, <&mailbox 2>; + shmem = <&cpu_scp_lpri>, <&cpu_scp_hpri>; scpi_sensors1: sensors { compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index b1cd4ad1889a..0f4e5ab26477 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -19,6 +19,7 @@ Required properties: * "qcom,scm-msm8953" * "qcom,scm-msm8960" * "qcom,scm-msm8974" + * "qcom,scm-msm8976" * "qcom,scm-msm8994" * "qcom,scm-msm8996" * "qcom,scm-msm8998" @@ -37,7 +38,7 @@ Required properties: * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and "qcom,scm-msm8960" * core, iface and bus clocks required for "qcom,scm-apq8084", - "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974" + "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. - qcom,dload-mode: phandle to the TCSR hardware block and offset of the diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml new file mode 100644 index 000000000000..fcf0011b8e6d --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QEMU Firmware Configuration bindings + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + Various QEMU emulation / virtualization targets provide the following + Firmware Configuration interface on the "virt" machine type: + + - A write-only, 16-bit wide selector (or control) register, + - a read-write, 64-bit wide data register. + + QEMU exposes the control and data register to guests as memory mapped + registers; their location is communicated to the guest's UEFI firmware in the + DTB that QEMU places at the bottom of the guest's DRAM. + + The authoritative guest-side hardware interface documentation to the fw_cfg + device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree. + + +properties: + compatible: + const: qemu,fw-cfg-mmio + + reg: + maxItems: 1 + description: | + * Bytes 0x0 to 0x7 cover the data register. + * Bytes 0x8 to 0x9 cover the selector register. + * Further registers may be appended to the region in case of future interface + revisions / feature bits. + + dma-coherent: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + fw-cfg@9020000 { + compatible = "qemu,fw-cfg-mmio"; + reg = <0x9020000 0xa>; + }; +... |