diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio')
6 files changed, 249 insertions, 145 deletions
diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt deleted file mode 100644 index bef353f370d8..000000000000 --- a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt +++ /dev/null @@ -1,20 +0,0 @@ -Fujitsu MB86S7x GPIO Controller -------------------------------- - -Required properties: -- compatible: Should be "fujitsu,mb86s70-gpio" -- reg: Base address and length of register space -- clocks: Specify the clock -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be <2>. The first cell is the pin number and the - second cell is used to specify optional parameters: - - bit 0 specifies polarity (0 for normal, 1 for inverted). - -Examples: - gpio0: gpio@31000000 { - compatible = "fujitsu,mb86s70-gpio"; - reg = <0 0x31000000 0x10000>; - gpio-controller; - #gpio-cells = <2>; - clocks = <&clk 0 2 1>; - }; diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml new file mode 100644 index 000000000000..d18d95285465 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/fujitsu,mb86s70-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fujitsu MB86S7x GPIO Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +properties: + compatible: + oneOf: + - items: + - const: socionext,synquacer-gpio + - const: fujitsu,mb86s70-gpio + - const: fujitsu,mb86s70-gpio + + reg: + maxItems: 1 + + '#gpio-cells': + const: 2 + + gpio-controller: true + gpio-line-names: true + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + - clocks + +additionalProperties: false + +examples: + - | + gpio@31000000 { + compatible = "fujitsu,mb86s70-gpio"; + reg = <0x31000000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&clk 0 2 1>; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt deleted file mode 100644 index 54040a2bfe3a..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt +++ /dev/null @@ -1,97 +0,0 @@ -Spreadtrum EIC controller bindings - -The EIC is the abbreviation of external interrupt controller, which can -be used only in input mode. The Spreadtrum platform has 2 EIC controllers, -one is in digital chip, and another one is in PMIC. The digital chip EIC -controller contains 4 sub-modules: EIC-debounce, EIC-latch, EIC-async and -EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub- -module. - -The EIC-debounce sub-module provides up to 8 source input signal -connections. A debounce mechanism is used to capture the input signals' -stable status (millisecond resolution) and a single-trigger mechanism -is introduced into this sub-module to enhance the input event detection -reliability. In addition, this sub-module's clock can be shut off -automatically to reduce power dissipation. Moreover the debounce range -is from 1ms to 4s with a step size of 1ms. The input signal will be -ignored if it is asserted for less than 1 ms. - -The EIC-latch sub-module is used to latch some special power down signals -and generate interrupts, since the EIC-latch does not depend on the APB -clock to capture signals. - -The EIC-async sub-module uses a 32kHz clock to capture the short signals -(microsecond resolution) to generate interrupts by level or edge trigger. - -The EIC-sync is similar with GPIO's input function, which is a synchronized -signal input register. It can generate interrupts by level or edge trigger -when detecting input signals. - -Required properties: -- compatible: Should be one of the following: - "sprd,sc9860-eic-debounce", - "sprd,sc9860-eic-latch", - "sprd,sc9860-eic-async", - "sprd,sc9860-eic-sync", - "sprd,sc2731-eic". -- reg: Define the base and range of the I/O address space containing - the GPIO controller registers. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be <2>. The first cell is the gpio number and - the second cell is used to specify optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be <2>. Specifies the number of cells needed - to encode interrupt source. -- interrupts: Should be the port interrupt shared by all the gpios. - -Example: - eic_debounce: gpio@40210000 { - compatible = "sprd,sc9860-eic-debounce"; - reg = <0 0x40210000 0 0x80>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - }; - - eic_latch: gpio@40210080 { - compatible = "sprd,sc9860-eic-latch"; - reg = <0 0x40210080 0 0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - }; - - eic_async: gpio@402100a0 { - compatible = "sprd,sc9860-eic-async"; - reg = <0 0x402100a0 0 0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - }; - - eic_sync: gpio@402100c0 { - compatible = "sprd,sc9860-eic-sync"; - reg = <0 0x402100c0 0 0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - }; - - pmic_eic: gpio@300 { - compatible = "sprd,sc2731-eic"; - reg = <0x300>; - interrupt-parent = <&sc2731_pmic>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-sprd.txt deleted file mode 100644 index eca97d45388f..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt +++ /dev/null @@ -1,28 +0,0 @@ -Spreadtrum GPIO controller bindings - -The controller's registers are organized as sets of sixteen 16-bit -registers with each set controlling a bank of up to 16 pins. A single -interrupt is shared for all of the banks handled by the controller. - -Required properties: -- compatible: Should be "sprd,sc9860-gpio". -- reg: Define the base and range of the I/O address space containing -the GPIO controller registers. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be <2>. The first cell is the gpio number and -the second cell is used to specify optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be <2>. Specifies the number of cells needed -to encode interrupt source. -- interrupts: Should be the port interrupt shared by all the gpios. - -Example: - ap_gpio: gpio@40280000 { - compatible = "sprd,sc9860-gpio"; - reg = <0 0x40280000 0 0x1000>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml new file mode 100644 index 000000000000..99fcf970773a --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/sprd,gpio-eic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc EIC controller + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: | + The EIC is the abbreviation of external interrupt controller, which can + be used only in input mode. The Spreadtrum platform has 2 EIC controllers, + one is in digital chip, and another one is in PMIC. The digital chip EIC + controller contains 4 sub-modules, i.e. EIC-debounce, EIC-latch, EIC-async and + EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub- + module. + + The EIC-debounce sub-module provides up to 8 source input signal + connections. A debounce mechanism is used to capture the input signals' + stable status (millisecond resolution) and a single-trigger mechanism + is introduced into this sub-module to enhance the input event detection + reliability. In addition, this sub-module's clock can be shut off + automatically to reduce power dissipation. Moreover the debounce range + is from 1ms to 4s with a step size of 1ms. The input signal will be + ignored if it is asserted for less than 1 ms. + + The EIC-latch sub-module is used to latch some special power down signals + and generate interrupts, since the EIC-latch does not depend on the APB + clock to capture signals. + + The EIC-async sub-module uses a 32kHz clock to capture the short signals + (microsecond resolution) to generate interrupts by level or edge trigger. + + The EIC-sync is similar with GPIO's input function, which is a synchronized + signal input register. It can generate interrupts by level or edge trigger + when detecting input signals. + +properties: + compatible: + oneOf: + - enum: + - sprd,sc9860-eic-debounce + - sprd,sc9860-eic-latch + - sprd,sc9860-eic-async + - sprd,sc9860-eic-sync + - sprd,sc2731-eic + - items: + - enum: + - sprd,ums512-eic-debounce + - const: sprd,sc9860-eic-debounce + - items: + - enum: + - sprd,ums512-eic-latch + - const: sprd,sc9860-eic-latch + - items: + - enum: + - sprd,ums512-eic-async + - const: sprd,sc9860-eic-async + - items: + - enum: + - sprd,ums512-eic-sync + - const: sprd,sc9860-eic-sync + - items: + - enum: + - sprd,sc2730-eic + - const: sprd,sc2731-eic + + reg: + minItems: 1 + maxItems: 3 + description: + EIC controller can support maximum 3 banks which has its own + address base. + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + description: + The interrupt shared by all GPIO lines for this controller. + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + eic_debounce: gpio@40210000 { + compatible = "sprd,sc9860-eic-debounce"; + reg = <0 0x40210000 0 0x80>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml new file mode 100644 index 000000000000..483168838128 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/sprd,gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc GPIO controller + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: | + The controller's registers are organized as sets of sixteen 16-bit + registers with each set controlling a bank of up to 16 pins. A single + interrupt is shared for all of the banks handled by the controller. + +properties: + compatible: + oneOf: + - const: sprd,sc9860-gpio + - items: + - enum: + - sprd,ums512-gpio + - const: sprd,sc9860-gpio + + reg: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + description: The interrupt shared by all GPIO lines for this controller. + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ap_gpio: gpio@40280000 { + compatible = "sprd,sc9860-gpio"; + reg = <0 0x40280000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +... |