diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpu')
16 files changed, 1261 insertions, 135 deletions
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 0c426e371e71..e796a1ff8c82 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -14,34 +14,103 @@ properties: pattern: '^gpu@[a-f0-9]+$' compatible: - items: - - enum: - - amlogic,meson-g12a-mali - - realtek,rtd1619-mali - - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable + oneOf: + - items: + - enum: + - amlogic,meson-g12a-mali + - mediatek,mt8183-mali + - mediatek,mt8183b-mali + - mediatek,mt8186-mali + - realtek,rtd1619-mali + - renesas,r9a07g044-mali + - renesas,r9a07g054-mali + - rockchip,px30-mali + - rockchip,rk3568-mali + - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable + - items: + - enum: + - mediatek,mt8195-mali + - const: mediatek,mt8192-mali + - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable + - items: + - enum: + - mediatek,mt8192-mali + - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable reg: maxItems: 1 interrupts: + minItems: 3 items: - description: Job interrupt - description: MMU interrupt - description: GPU interrupt + - description: Event interrupt interrupt-names: + minItems: 3 items: - const: job - const: mmu - const: gpu + - const: event clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 + + clock-names: true mali-supply: true + sram-supply: true + operating-points-v2: true + power-domains: + minItems: 1 + maxItems: 5 + + power-domain-names: + minItems: 2 + maxItems: 5 + + resets: + minItems: 1 + maxItems: 3 + + reset-names: true + + "#cooling-cells": + const: 2 + + dynamic-power-coefficient: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the GPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + dma-coherent: true + + nvmem-cell-names: + items: + - const: speed-bin + + nvmem-cells: + maxItems: 1 + required: - compatible - reg @@ -49,6 +118,8 @@ required: - interrupt-names - clocks +additionalProperties: false + allOf: - if: properties: @@ -57,10 +128,141 @@ allOf: const: amlogic,meson-g12a-mali then: properties: + power-domains: + maxItems: 1 + power-domain-names: false + required: + - resets + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a07g044-mali + - renesas,r9a07g054-mali + then: + properties: + interrupts: + minItems: 4 + interrupt-names: + minItems: 4 + clocks: + minItems: 3 + clock-names: + items: + - const: gpu + - const: bus + - const: bus_ace + power-domains: + maxItems: 1 + power-domain-names: false resets: - minItems: 2 + minItems: 3 + reset-names: + items: + - const: rst + - const: axi_rst + - const: ace_rst required: + - clock-names + - power-domains - resets + - reset-names + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mali + then: + properties: + power-domains: + minItems: 3 + maxItems: 3 + power-domain-names: + items: + - const: core0 + - const: core1 + - const: core2 + + required: + - sram-supply + - power-domains + - power-domain-names + else: + properties: + sram-supply: false + - if: + properties: + compatible: + contains: + const: mediatek,mt8183b-mali + then: + properties: + power-domains: + minItems: 3 + maxItems: 3 + power-domain-names: + items: + - const: core0 + - const: core1 + - const: core2 + required: + - power-domains + - power-domain-names + - if: + properties: + compatible: + contains: + const: mediatek,mt8186-mali + then: + properties: + power-domains: + minItems: 2 + maxItems: 2 + power-domain-names: + items: + - const: core0 + - const: core1 + required: + - power-domains + - power-domain-names + - if: + properties: + compatible: + contains: + const: mediatek,mt8192-mali + then: + properties: + power-domains: + minItems: 5 + power-domain-names: + items: + - const: core0 + - const: core1 + - const: core2 + - const: core3 + - const: core4 + required: + - power-domains + - power-domain-names + - if: + properties: + compatible: + contains: + const: rockchip,rk3568-mali + then: + properties: + clocks: + minItems: 2 + clock-names: + items: + - const: gpu + - const: bus + power-domains: + maxItems: 1 + power-domain-names: false + required: + - clock-names examples: - | @@ -80,34 +282,34 @@ examples: resets = <&reset 0>, <&reset 1>; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; - opp@533000000 { + opp-533000000 { opp-hz = /bits/ 64 <533000000>; opp-microvolt = <1250000>; }; - opp@450000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-microvolt = <1150000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1125000>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; opp-microvolt = <1075000>; }; - opp@266000000 { + opp-266000000 { opp-hz = /bits/ 64 <266000000>; opp-microvolt = <1025000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <925000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <912500>; }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 36f59b3ade71..0801da33a385 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -16,33 +16,38 @@ properties: oneOf: - items: - enum: - - samsung,exynos5250-mali + - samsung,exynos5250-mali - const: arm,mali-t604 - items: - enum: - - samsung,exynos5420-mali + - samsung,exynos5420-mali - const: arm,mali-t628 - items: - enum: - - allwinner,sun50i-h6-mali + - allwinner,sun50i-h6-mali - const: arm,mali-t720 - items: - enum: - - amlogic,meson-gxm-mali - - realtek,rtd1295-mali + - amlogic,meson-gxm-mali + - realtek,rtd1295-mali - const: arm,mali-t820 - items: - enum: - - arm,juno-mali + - arm,juno-mali - const: arm,mali-t624 - items: - enum: - - rockchip,rk3288-mali - - samsung,exynos5433-mali + - rockchip,rk3288-mali + - samsung,exynos5433-mali - const: arm,mali-t760 - items: - enum: - - rockchip,rk3399-mali + - samsung,exynos7-mali + - const: samsung,exynos5433-mali + - const: arm,mali-t760 + - items: + - enum: + - rockchip,rk3399-mali - const: arm,mali-t860 # "arm,mali-t830" @@ -74,6 +79,11 @@ properties: - const: bus mali-supply: true + opp-table: + type: object + + power-domains: + maxItems: 1 resets: minItems: 1 @@ -84,6 +94,25 @@ properties: "#cooling-cells": const: 2 + dma-coherent: true + + dynamic-power-coefficient: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the GPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + required: - compatible - reg @@ -91,6 +120,8 @@ required: - interrupt-names - clocks +additionalProperties: false + allOf: - if: properties: @@ -135,34 +166,34 @@ examples: #cooling-cells = <2>; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; - opp@533000000 { + opp-533000000 { opp-hz = /bits/ 64 <533000000>; opp-microvolt = <1250000>; }; - opp@450000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-microvolt = <1150000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1125000>; }; - opp@350000000 { + opp-350000000 { opp-hz = /bits/ 64 <350000000>; opp-microvolt = <1075000>; }; - opp@266000000 { + opp-266000000 { opp-hz = /bits/ 64 <266000000>; opp-microvolt = <1025000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <925000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <912500>; }; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml index afde81be3c29..abd4aa335fbc 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml @@ -8,7 +8,7 @@ title: ARM Mali Utgard GPU maintainers: - Rob Herring <robh@kernel.org> - - Maxime Ripard <maxime.ripard@free-electrons.com> + - Maxime Ripard <mripard@kernel.org> - Heiko Stuebner <heiko@sntech.de> properties: @@ -25,13 +25,16 @@ properties: - allwinner,sun4i-a10-mali - allwinner,sun7i-a20-mali - allwinner,sun8i-h3-mali + - allwinner,sun8i-r40-mali - allwinner,sun50i-a64-mali - rockchip,rk3036-mali - rockchip,rk3066-mali + - rockchip,rk3128-mali - rockchip,rk3188-mali - rockchip,rk3228-mali - samsung,exynos4210-mali - stericsson,db8500-mali + - xlnx,zynqmp-mali - const: arm,mali-400 - items: - enum: @@ -41,6 +44,7 @@ properties: - amlogic,meson-gxbb-mali - amlogic,meson-gxl-mali - hisilicon,hi6220-mali + - mediatek,mt7623-mali - rockchip,rk3328-mali - const: arm,mali-450 @@ -99,6 +103,9 @@ properties: mali-supply: true + opp-table: + type: object + power-domains: maxItems: 1 @@ -107,6 +114,9 @@ properties: operating-points-v2: true + "#cooling-cells": + const: 2 + required: - compatible - reg @@ -115,6 +125,8 @@ required: - clocks - clock-names +additionalProperties: false + allOf: - if: properties: @@ -123,11 +135,13 @@ allOf: enum: - allwinner,sun4i-a10-mali - allwinner,sun7i-a20-mali + - allwinner,sun8i-r40-mali - allwinner,sun50i-a64-mali - allwinner,sun50i-h5-mali - amlogic,meson8-mali - amlogic,meson8b-mali - hisilicon,hi6220-mali + - mediatek,mt7623-mali - rockchip,rk3036-mali - rockchip,rk3066-mali - rockchip,rk3188-mali @@ -162,6 +176,7 @@ examples: clocks = <&ccu 1>, <&ccu 2>; clock-names = "bus", "core"; resets = <&ccu 1>; + #cooling-cells = <2>; }; ... diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt deleted file mode 100644 index b2df82b44625..000000000000 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt +++ /dev/null @@ -1,33 +0,0 @@ -Broadcom V3D GPU - -Only the Broadcom V3D 3.x and newer GPUs are covered by this binding. -For V3D 2.x, see brcm,bcm-vc4.txt. - -Required properties: -- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" -- reg: Physical base addresses and lengths of the register areas -- reg-names: Names for the register areas. The "hub" and "core0" - register areas are always required. The "gca" register area - is required if the GCA cache controller is present. The - "bridge" register area is required if an external reset - controller is not present. -- interrupts: The interrupt numbers. The first interrupt is for the hub, - while the following interrupts are separate interrupt lines - for the cores (if they don't share the hub's interrupt). - See bindings/interrupt-controller/interrupts.txt - -Optional properties: -- clocks: The core clock the unit runs on -- resets: The reset line for v3d, if not using a mapping of the bridge - See bindings/reset/reset.txt - -v3d { - compatible = "brcm,7268-v3d"; - reg = <0xf1204000 0x100>, - <0xf1200000 0x4000>, - <0xf1208000 0x4000>, - <0xf1204100 0x100>; - reg-names = "bridge", "hub", "core0", "gca"; - interrupts = <0 78 4>, - <0 77 4>; -}; diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml new file mode 100644 index 000000000000..dc078ceeca9a --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom V3D GPU + +maintainers: + - Eric Anholt <eric@anholt.net> + - Nicolas Saenz Julienne <nsaenzjulienne@suse.de> + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + + compatible: + enum: + - brcm,2711-v3d + - brcm,2712-v3d + - brcm,7268-v3d + - brcm,7278-v3d + + reg: + items: + - description: hub register (required) + - description: core0 register (required) + - description: GCA cache controller register (if GCA controller present) + - description: bridge register (if no external reset controller) + minItems: 2 + + reg-names: + items: + - const: hub + - const: core0 + - enum: [ bridge, gca ] + - enum: [ bridge, gca ] + minItems: 2 + + interrupts: + items: + - description: hub interrupt (required) + - description: core interrupts (if it doesn't share the hub's interrupt) + minItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + +additionalProperties: false + +examples: + - | + gpu@f1200000 { + compatible = "brcm,7268-v3d"; + reg = <0xf1200000 0x4000>, + <0xf1208000 0x4000>, + <0xf1204000 0x100>, + <0xf1204100 0x100>; + reg-names = "hub", "core0", "bridge", "gca"; + interrupts = <0 78 4>, + <0 77 4>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml new file mode 100644 index 000000000000..ba4c6473ff92 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra NVDEC + +description: | + NVDEC is the hardware video decoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvdec@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra210-nvdec + - nvidia,tegra186-nvdec + - nvidia,tegra194-nvdec + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: nvdec + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA read 2 memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: read-1 + - const: write + + nvidia,host1x-class: + description: | + Host1x class of the engine, used to specify the targeted engine + when programming the engine through Host1x channels or when + configuring engine-specific behavior in Host1x. + default: 0xf0 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + nvdec@15480000 { + compatible = "nvidia,tegra186-nvdec"; + reg = <0x15480000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&bpmp TEGRA186_RESET_NVDEC>; + reset-names = "nvdec"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "read-1", "write"; + iommus = <&smmu TEGRA186_SID_NVDEC>; + }; diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml new file mode 100644 index 000000000000..c23dae713eb8 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra NVENC + +description: | + NVENC is the hardware video encoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvenc@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra210-nvenc + - nvidia,tegra186-nvenc + - nvidia,tegra194-nvenc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: nvenc + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvenc + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + minItems: 2 + maxItems: 3 + + interconnect-names: + minItems: 2 + maxItems: 3 + + nvidia,host1x-class: + description: | + Host1x class of the engine, used to specify the targeted engine + when programming the engine through Host1x channels or when + configuring engine-specific behavior in Host1x. + default: 0x21 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + +allOf: + - if: + properties: + compatible: + enum: + - nvidia,tegra210-nvenc + - nvidia,tegra186-nvenc + then: + properties: + interconnects: + items: + - description: DMA read memory client + - description: DMA write memory client + interconnect-names: + items: + - const: dma-mem + - const: write + - if: + properties: + compatible: + enum: + - nvidia,tegra194-nvenc + then: + properties: + interconnects: + items: + - description: DMA read memory client + - description: DMA read 2 memory client + - description: DMA write memory client + interconnect-names: + items: + - const: dma-mem + - const: read-1 + - const: write + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + nvenc@154c0000 { + compatible = "nvidia,tegra186-nvenc"; + reg = <0x154c0000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVENC>; + clock-names = "nvenc"; + resets = <&bpmp TEGRA186_RESET_NVENC>; + reset-names = "nvenc"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_NVENC>; + }; diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml new file mode 100644 index 000000000000..99a33a5eac3f --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvjpg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra NVJPG + +description: | + NVJPG is the hardware JPEG decoder and encoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically programmed + through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvjpg@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra210-nvjpg + - nvidia,tegra186-nvjpg + - nvidia,tegra194-nvjpg + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: nvjpg + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvjpg + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: write + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/power/tegra186-powergate.h> + #include <dt-bindings/reset/tegra186-reset.h> + + nvjpg@15380000 { + compatible = "nvidia,tegra186-nvjpg"; + reg = <0x15380000 0x40000>; + clocks = <&bpmp TEGRA186_CLK_NVJPG>; + clock-names = "nvjpg"; + resets = <&bpmp TEGRA186_RESET_NVJPG>; + reset-names = "nvjpg"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_NVJPG>; + }; diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml new file mode 100644 index 000000000000..0b7561c8b9bb --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra234 NVDEC + +description: | + NVDEC is the hardware video decoder present on NVIDIA Tegra210 + and newer chips. It is located on the Host1x bus and typically + programmed through Host1x channels. + +maintainers: + - Thierry Reding <treding@gmail.com> + - Mikko Perttunen <mperttunen@nvidia.com> + +properties: + $nodename: + pattern: "^nvdec@[0-9a-f]*$" + + compatible: + enum: + - nvidia,tegra234-nvdec + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: nvdec + - const: fuse + - const: tsec_pka + + resets: + maxItems: 1 + + reset-names: + items: + - const: nvdec + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + dma-coherent: true + + interconnects: + items: + - description: DMA read memory client + - description: DMA write memory client + + interconnect-names: + items: + - const: dma-mem + - const: write + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the memory controller for determining information for the NVDEC + firmware secure carveout. This carveout is configured by the bootloader and + not accessible to CPU. + + nvidia,bl-manifest-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader manifest from beginning of firmware that was configured by + the bootloader. + + nvidia,bl-code-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader code section from beginning of firmware that was configured by + the bootloader. + + nvidia,bl-data-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to bootloader data section from beginning of firmware that was configured by + the bootloader. + + nvidia,os-manifest-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system manifest from beginning of firmware that was configured by + the bootloader. + + nvidia,os-code-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system code section from beginning of firmware that was configured by + the bootloader. + + nvidia,os-data-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Offset to operating system data section from beginning of firmware that was configured + by the bootloader. + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + - nvidia,memory-controller + - nvidia,bl-manifest-offset + - nvidia,bl-code-offset + - nvidia,bl-data-offset + - nvidia,os-manifest-offset + - nvidia,os-code-offset + - nvidia,os-data-offset + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra234-clock.h> + #include <dt-bindings/memory/tegra234-mc.h> + #include <dt-bindings/power/tegra234-powergate.h> + #include <dt-bindings/reset/tegra234-reset.h> + + nvdec@15480000 { + compatible = "nvidia,tegra234-nvdec"; + reg = <0x15480000 0x00040000>; + clocks = <&bpmp TEGRA234_CLK_NVDEC>, + <&bpmp TEGRA234_CLK_FUSE>, + <&bpmp TEGRA234_CLK_TSEC_PKA>; + clock-names = "nvdec", "fuse", "tsec_pka"; + resets = <&bpmp TEGRA234_RESET_NVDEC>; + reset-names = "nvdec"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>; + interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>, + <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>; + dma-coherent; + + nvidia,memory-controller = <&mc>; + + /* Placeholder values, to be replaced with values from overlay */ + nvidia,bl-manifest-offset = <0>; + nvidia,bl-data-offset = <0>; + nvidia,bl-code-offset = <0>; + nvidia,os-manifest-offset = <0>; + nvidia,os-data-offset = <0>; + nvidia,os-code-offset = <0>; + }; diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml new file mode 100644 index 000000000000..256e252f8087 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Imagination Technologies Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/img,powervr-rogue.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination Technologies PowerVR and IMG Rogue GPUs + +maintainers: + - Frank Binns <frank.binns@imgtec.com> + +properties: + compatible: + items: + - enum: + - ti,am62-gpu + - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + items: + - const: core + - const: mem + - const: sys + minItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62-gpu + then: + properties: + clocks: + maxItems: 1 + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + gpu@fd00000 { + compatible = "ti,am62-gpu", "img,img-axe"; + reg = <0x0fd00000 0x20000>; + clocks = <&k3_clks 187 0>; + clock-names = "core"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>; + }; diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml new file mode 100644 index 000000000000..f5898b04381c --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 Imagination Technologies Ltd. +# Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/img,powervr-sgx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Imagination Technologies PowerVR SGX GPUs + +maintainers: + - Frank Binns <frank.binns@imgtec.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,omap3430-gpu # Rev 121 + - ti,omap3630-gpu # Rev 125 + - const: img,powervr-sgx530 + - items: + - enum: + - ingenic,jz4780-gpu # Rev 130 + - ti,omap4430-gpu # Rev 120 + - const: img,powervr-sgx540 + - items: + - enum: + - allwinner,sun6i-a31-gpu # MP2 Rev 115 + - ti,omap4470-gpu # MP1 Rev 112 + - ti,omap5432-gpu # MP2 Rev 105 + - ti,am5728-gpu # MP2 Rev 116 + - ti,am6548-gpu # MP1 Rev 117 + - const: img,powervr-sgx544 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + items: + - const: core + - const: mem + - const: sys + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +allOf: + - if: + properties: + compatible: + contains: + const: ti,am6548-gpu + then: + required: + - power-domains + else: + properties: + power-domains: false + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-gpu + - ingenic,jz4780-gpu + then: + required: + - clocks + - clock-names + else: + properties: + clocks: false + clock-names: false + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-gpu + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + minItems: 2 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: ingenic,jz4780-gpu + then: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + gpu@7000000 { + compatible = "ti,am6548-gpu", "img,powervr-sgx544"; + reg = <0x7000000 0x10000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gpu: gpu@1c40000 { + compatible = "allwinner,sun6i-a31-gpu", "img,powervr-sgx544"; + reg = <0x01c40000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 1>, <&ccu 2>; + clock-names = "core", "mem"; + }; diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt index f32bbba4d3bc..cc6ce5221a38 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -6,6 +6,7 @@ Required properties: - nvidia,gk20a - nvidia,gm20b - nvidia,gp10b + - nvidia,gv11b - reg: Physical base address and length of the controller's registers. Must contain two entries: - first entry for bar0 @@ -25,6 +26,9 @@ Required properties: If the compatible string is "nvidia,gm20b", then the following clock is also required: - ref +If the compatible string is "nvidia,gv11b", then the following clock is also +required: + - fuse - resets: Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following entries: @@ -88,3 +92,24 @@ Example for GP10B: power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; iommus = <&smmu TEGRA186_SID_GPU>; }; + +Example for GV11B: + + gpu@17000000 { + compatible = "nvidia,gv11b"; + reg = <0x17000000 0x1000000>, + <0x18000000 0x1000000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&bpmp TEGRA194_CLK_GPCCLK>, + <&bpmp TEGRA194_CLK_GPU_PWR>, + <&bpmp TEGRA194_CLK_FUSE>; + clock-names = "gpu", "pwr", "fuse"; + resets = <&bpmp TEGRA194_RESET_GPU>; + reset-names = "gpu"; + dma-coherent; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>; + iommus = <&smmu TEGRA194_SID_GPU>; + }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml index e7daae862578..132aaa49597b 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml @@ -22,36 +22,20 @@ properties: interrupts: maxItems: 1 - clocks: {} - clock-names: {} - iommus: {} - power-domains: {} - -if: - properties: - compatible: - contains: - const: samsung,exynos5250-g2d - -then: - properties: - clocks: - items: - - description: fimg2d clock - clock-names: - items: - - const: fimg2d - -else: - properties: - clocks: - items: - - description: sclk_fimg2d clock - - description: fimg2d clock - clock-names: - items: - - const: sclk_fimg2d - - const: fimg2d + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + iommus: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 required: - compatible @@ -60,6 +44,33 @@ required: - clocks - clock-names +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5250-g2d + + then: + properties: + clocks: + items: + - description: fimg2d clock + clock-names: + items: + - const: fimg2d + + else: + properties: + clocks: + items: + - description: sclk_fimg2d clock + - description: fimg2d clock + clock-names: + items: + - const: sclk_fimg2d + - const: fimg2d + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml index f4dfa6fc724c..18bf44e06e8f 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml @@ -12,16 +12,23 @@ maintainers: properties: compatible: enum: - - "samsung,s5pv210-rotator" - - "samsung,exynos4210-rotator" - - "samsung,exynos4212-rotator" - - "samsung,exynos5250-rotator" + - samsung,s5pv210-rotator + - samsung,exynos4210-rotator + - samsung,exynos4212-rotator + - samsung,exynos5250-rotator + reg: maxItems: 1 interrupts: maxItems: 1 + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + clocks: maxItems: 1 @@ -36,6 +43,8 @@ required: - clocks - clock-names +additionalProperties: false + examples: - | rotator@12810000 { @@ -45,4 +54,3 @@ examples: clocks = <&clock 278>; clock-names = "rotator"; }; - diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml index 5317ac64426a..9fb530e65d0e 100644 --- a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml +++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml @@ -21,40 +21,20 @@ properties: interrupts: maxItems: 1 - clocks: {} - clock-names: {} - iommus: {} - power-domains: {} - -if: - properties: - compatible: - contains: - const: samsung,exynos5420-scaler - -then: - properties: - clocks: - items: - - description: mscl clock - - clock-names: - items: - - const: mscl - -else: - properties: - clocks: - items: - - description: pclk clock - - description: aclk clock - - description: aclk_xiu clock - - clock-names: - items: - - const: pclk - - const: aclk - - const: aclk_xiu + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + iommus: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 required: - compatible @@ -63,6 +43,39 @@ required: - clocks - clock-names +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5420-scaler + + then: + properties: + clocks: + items: + - description: mscl clock + clock-names: + items: + - const: mscl + iommus: + minItems: 2 + + else: + properties: + clocks: + items: + - description: pclk clock + - description: aclk clock + - description: aclk_xiu clock + clock-names: + items: + - const: pclk + - const: aclk + - const: aclk_xiu + iommus: + maxItems: 1 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml new file mode 100644 index 000000000000..b1b10ea70ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Vivante GPU + +description: Vivante GPU core devices + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +properties: + compatible: + const: vivante,gc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#cooling-cells': + const: 2 + + assigned-clock-parents: true + assigned-clock-rates: true + assigned-clocks: true + + clocks: + items: + - description: AXI/master interface clock + - description: GPU core clock + - description: Shader clock (only required if GPU has feature PIPE_3D) + - description: AHB/slave interface clock (only required if GPU can gate + slave interface independently) + minItems: 1 + + clock-names: + items: + enum: [ bus, core, shader, reg ] + minItems: 1 + maxItems: 4 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + gpu@130000 { + compatible = "vivante,gc"; + reg = <0x00130000 0x4000>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>, + <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>; + clock-names = "bus", "core", "shader"; + power-domains = <&gpc 1>; + }; + +... |