1 files changed, 97 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
new file mode 100644
index 000000000000..4e5abf7580cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to PWM lines
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    const: pwm-fan
+
+  cooling-levels:
+    description: PWM duty cycle values corresponding to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maximum: 255
+
+  fan-supply:
+    description: Phandle to the regulator that provides power to the fan.
+
+  interrupts:
+    description:
+      This contains an interrupt specifier for each fan tachometer output
+      connected to an interrupt source. The output signal must generate a
+      defined number of interrupts per fan revolution, which require that
+      it must be self resetting edge interrupts.
+    maxItems: 1
+
+  pulses-per-revolution:
+    description:
+      Define the number of pulses per fan revolution for each tachometer
+      input as an integer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    default: 2
+
+  pwms:
+    description: The PWM that is used to control the fan.
+    maxItems: 1
+
+  "#cooling-cells": true
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm-fan {
+      compatible = "pwm-fan";
+      cooling-levels = <0 102 170 230>;
+      pwms = <&pwm 0 10000 0>;
+      #cooling-cells = <2>;
+    };
+
+    thermal-zones {
+      cpu_thermal: cpu-thermal {
+        thermal-sensors = <&tmu 0>;
+        polling-delay-passive = <0>;
+        polling-delay = <0>;
+
+        trips {
+          cpu_alert1: cpu-alert1 {
+            temperature = <100000>; /* millicelsius */
+            hysteresis = <2000>; /* millicelsius */
+            type = "passive";
+          };
+        };
+
+        cooling-maps {
+          map0 {
+            trip = <&cpu_alert1>;
+            cooling-device = <&fan0 0 1>;
+          };
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm-fan {
+      compatible = "pwm-fan";
+      pwms = <&pwm 0 40000 0>;
+      fan-supply = <&reg_fan>;
+      interrupt-parent = <&gpio5>;
+      interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+      pulses-per-revolution = <2>;
+    };