diff options
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml new file mode 100644 index 000000000000..5f10f1207d69 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,ina3221.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments INA3221 Current and Voltage Monitor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + const: ti,ina3221 + + reg: + maxItems: 1 + + ti,single-shot: + description: | + This chip has two power modes: single-shot (chip takes one measurement + and then shuts itself down) and continuous (chip takes continuous + measurements). The continuous mode is more reliable and suitable for + hardware monitor type device, but the single-shot mode is more power- + friendly and useful for battery-powered device which cares power + consumptions while still needs some measurements occasionally. + + If this property is present, the single-shot mode will be used, instead + of the default continuous one for monitoring. + $ref: /schemas/types.yaml#/definitions/flag + + "#address-cells": + description: Required only if a child node is present. + const: 1 + + "#size-cells": + description: Required only if a child node is present. + const: 0 + +patternProperties: + "^input@[0-2]$": + description: The node contains optional child nodes for three channels. + Each child node describes the information of input source. Input channels + default to enabled in the chip. Unless channels are explicitly disabled + in device-tree, input channels will be enabled. + type: object + additionalProperties: false + properties: + reg: + description: Must be 0, 1 and 2, corresponding to the IN1, IN2 or IN3 + ports of the INA3221, respectively. + enum: [ 0, 1, 2 ] + + label: + description: name of the input source + + shunt-resistor-micro-ohms: + description: shunt resistor value in micro-Ohm + + ti,summation-disable: + description: | + The INA3221 has a critical alert pin that can be controlled by the + summation control function. This function adds the single + shunt-voltage conversions for the desired channels in order to + compare the combined sum to the programmed limit. The Shunt-Voltage + Sum Limit register contains the programmed value that is compared + to the value in the Shunt-Voltage Sum register in order to + determine if the total summed limit is exceeded. If the + shunt-voltage sum limit value is exceeded, the critical alert pin + is asserted. + + For the summation limit to have a meaningful value, it is necessary + to use the same shunt-resistor value on all enabled channels. If + this is not the case or if a channel should not be used for + triggering the critical alert pin, then this property can be used + exclude specific channels from the summation control function. + type: boolean + + required: + - reg + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + /* + * Input channels are enabled by default in the device and so + * to disable, must be explicitly disabled in device-tree. + */ + status = "disabled"; + }; + + input@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <5000>; + }; + + input@2 { + reg = <0x2>; + label = "VDD_5V"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; |