diff options
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt | 87 |
1 files changed, 0 insertions, 87 deletions
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt deleted file mode 100644 index 3f2f990c2e62..000000000000 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ /dev/null @@ -1,87 +0,0 @@ -NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver. - -Required properties: -- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or - "nvidia,tegra20-i2c". For Tegra30, must be "nvidia,tegra30-i2c". - For Tegra114, must be "nvidia,tegra114-i2c". Otherwise, must be - "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is - tegra124, tegra132, or tegra210. - Details of compatible are as follows: - nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C - controller. This only support master mode of I2C communication. Register - interface/offset and interrupts handling are different than generic I2C - controller. Driver of DVC I2C controller is only compatible with - "nvidia,tegra20-i2c-dvc". - nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support - master and slave mode of I2C communication. The i2c-tegra driver only - support master mode of I2C communication. Driver of I2C controller is - only compatible with "nvidia,tegra20-i2c". - nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is - very much similar to Tegra20 I2C controller with additional feature: - Continue Transfer Support. This feature helps to implement M_NO_START - as per I2C core API transfer flags. Driver of I2C controller is - compatible with "nvidia,tegra30-i2c" to enable the continue transfer - support. This is also compatible with "nvidia,tegra20-i2c" without - continue transfer support. - nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is - very much similar to Tegra30 I2C controller with some hardware - modification: - - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and - fast-clk. Tegra114 has only one clock source called as div-clk and - hence clock mechanism is changed in I2C controller. - - Tegra30/Tegra20 I2C controller has enabled per packet transfer by - default and there is no way to disable it. Tegra114 has this - interrupt disable by default and SW need to enable explicitly. - Due to above changes, Tegra114 I2C driver makes incompatible with - previous hardware driver. Hence, tegra114 I2C controller is compatible - with "nvidia,tegra114-i2c". - nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus - and is part of VE power domain and typically used for camera use-cases. - This VI I2C controller is mostly compatible with the programming model - of the regular I2C controllers with a few exceptions. The I2C registers - start at an offset of 0xc00 (instead of 0), registers are 16 bytes - apart (rather than 4) and the controller does not support slave mode. -- reg: Should contain I2C controller registers physical address and length. -- interrupts: Should contain I2C controller interrupts. -- address-cells: Address cells for I2C device address. -- size-cells: Size of the I2C device address. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - Tegra20/Tegra30: - - div-clk - - fast-clk - Tegra114: - - div-clk - Tegra210: - - div-clk - - slow (only for nvidia,tegra210-i2c-vi compatible node) -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must include the following entries: - - i2c -- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must - include venc powergate node as vi i2c is part of VE power domain. - tegra210-i2c-vi: - - pd_venc -- dmas: Must contain an entry for each entry in clock-names. - See ../dma/dma.txt for details. -- dma-names: Must include the following entries: - - rx - - tx - -Example: - - i2c@7000c000 { - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000c000 0x100>; - interrupts = <0 38 0x04>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&tegra_car 12>, <&tegra_car 124>; - clock-names = "div-clk", "fast-clk"; - resets = <&tegra_car 12>; - reset-names = "i2c"; - dmas = <&apbdma 16>, <&apbdma 16>; - dma-names = "rx", "tx"; - }; |