diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml | 138 |
1 files changed, 133 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 16def2985ab4..0bd2c6906c83 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -21,8 +21,15 @@ properties: - adi,ad7190 - adi,ad7192 - adi,ad7193 + - adi,ad7194 - adi,ad7195 + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + reg: maxItems: 1 @@ -32,15 +39,30 @@ properties: clocks: maxItems: 1 - description: phandle to the master clock (mclk) + description: + Optionally, either a crystal can be attached externally between MCLK1 and + MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2 + pin. If absent, internal 4.92MHz clock is used, which can be made + available on MCLK2 pin. clock-names: - items: - - const: mclk + enum: + - xtal + - mclk + + "#clock-cells": + const: 0 + description: + If present when internal clock is used, configured as clock provider. interrupts: maxItems: 1 + aincom-supply: + description: | + AINCOM voltage supply. Analog inputs AINx are referenced to this input + when configured for pseudo-differential operation. + dvdd-supply: description: DVdd voltage supply @@ -84,11 +106,55 @@ properties: description: see Documentation/devicetree/bindings/iio/adc/adc.yaml type: boolean + rdy-gpios: + description: + GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but + highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its + DOUT aka MISO role) and so usually triggers a spurious interrupt. The + distinction between such a spurious event and a real one can only be done + by reading such a GPIO. (There is a register telling the same + information, but accessing that one needs a SPI transfer which then + triggers another interrupt event.) + maxItems: 1 + +patternProperties: + "^channel@[0-9a-f]+$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + description: The channel index. + minimum: 0 + maximum: 271 + + diff-channels: + description: + Both inputs can be connected to pins AIN1 to AIN16 by choosing the + appropriate value from 1 to 16. + items: + minimum: 1 + maximum: 16 + + single-channel: + description: + Positive input can be connected to pins AIN1 to AIN16 by choosing the + appropriate value from 1 to 16. Negative input is connected to AINCOM. + minimum: 1 + maximum: 16 + + oneOf: + - required: + - reg + - diff-channels + - required: + - reg + - single-channel + required: - compatible - reg - - clocks - - clock-names - interrupts - dvdd-supply - avdd-supply @@ -98,11 +164,35 @@ required: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + enum: + - adi,ad7190 + - adi,ad7192 + - adi,ad7193 + - adi,ad7195 + then: + patternProperties: + "^channel@[0-9a-f]+$": false + - if: + anyOf: + - required: + - clocks + - required: + - clock-names + then: + properties: + "#clock-cells": false + required: + - clocks + - clock-names unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -117,6 +207,8 @@ examples: clock-names = "mclk"; interrupts = <25 0x2>; interrupt-parent = <&gpio>; + rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + aincom-supply = <&aincom>; dvdd-supply = <&dvdd>; avdd-supply = <&avdd>; vref-supply = <&vref>; @@ -127,3 +219,39 @@ examples: adi,burnout-currents-enable; }; }; + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7194"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + #clock-cells = <0>; + interrupts = <25 0x2>; + interrupt-parent = <&gpio>; + rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + aincom-supply = <&aincom>; + dvdd-supply = <&dvdd>; + avdd-supply = <&avdd>; + vref-supply = <&vref>; + + channel@0 { + reg = <0>; + diff-channels = <1 6>; + }; + + channel@1 { + reg = <1>; + single-channel = <1>; + }; + }; + }; |