diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml | 83 |
1 files changed, 80 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index 9996dd93f84b..cf74f84d6103 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -17,17 +17,32 @@ description: | interface for the actual ADC, while this IP core will interface to the data-lines of the ADC and handle the streaming of data into memory via DMA. + In some cases, the AXI ADC interface is used to perform specialized + operation to a particular ADC, e.g access the physical bus through + specific registers to write ADC registers. + In this case, we use a different compatible which indicates the target + IP core's name. + The following IP is currently supported: + - AXI AD7606x: specialized version of the IP core for all the chips from + the ad7606 family. https://wiki.analog.com/resources/fpga/docs/axi_adc_ip + https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html + http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html properties: compatible: enum: - adi,axi-adc-10.0.a + - adi,axi-ad7606x + - adi,axi-ad485x reg: maxItems: 1 + clocks: + maxItems: 1 + dmas: maxItems: 1 @@ -39,23 +54,85 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a the actual ADC to which this FPGA ADC interfaces to. + deprecated: true + + '#io-backend-cells': + const: 0 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^adc@[0-9a-f]+$": + type: object + properties: + reg: + maxItems: 1 + additionalProperties: true + required: + - compatible + - reg required: - compatible - dmas - reg - - adi,adc-dev + - clocks + +allOf: + - if: + properties: + compatible: + not: + contains: + const: adi,axi-ad7606x + then: + properties: + '#address-cells': false + '#size-cells': false + patternProperties: + "^adc@[0-9a-f]+$": false additionalProperties: false examples: - | - axi-adc@44a00000 { + adc@44a00000 { compatible = "adi,axi-adc-10.0.a"; reg = <0x44a00000 0x10000>; dmas = <&rx_dma 0>; dma-names = "rx"; + clocks = <&axi_clk>; + #io-backend-cells = <0>; + }; + - | + #include <dt-bindings/gpio/gpio.h> + parallel_bus_controller@44a00000 { + compatible = "adi,axi-ad7606x"; + reg = <0x44a00000 0x10000>; + dmas = <&rx_dma 0>; + dma-names = "rx"; + clocks = <&ext_clk>; + #address-cells = <1>; + #size-cells = <0>; - adi,adc-dev = <&spi_adc>; + adc@0 { + compatible = "adi,ad7606b"; + reg = <0>; + pwms = <&axi_pwm_gen 0 0>; + pwm-names = "convst1"; + avcc-supply = <&adc_vref>; + vdrive-supply = <&vdd_supply>; + reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>; + standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>; + adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH + &gpio0 87 GPIO_ACTIVE_HIGH + &gpio0 86 GPIO_ACTIVE_HIGH>; + io-backends = <¶llel_bus_controller>; + }; }; ... |