summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt37
1 files changed, 37 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
new file mode 100644
index 000000000000..049a1d36f013
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
@@ -0,0 +1,37 @@
+* Texas Instruments' ADC12130/ADC12132/ADC12138
+
+Required properties:
+ - compatible: Should be one of
+ * "ti,adc12130"
+ * "ti,adc12132"
+ * "ti,adc12138"
+ - reg: SPI chip select number for the device
+ - interrupts: Should contain interrupt for EOC (end of conversion)
+ - clocks: phandle to conversion clock input
+ - spi-max-frequency: Definision as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+ - vref-p-supply: The regulator supply for positive analog voltage reference
+
+Optional properties:
+ - vref-n-supply: The regulator supply for negative analog voltage reference
+ (Note that this must not go below GND or exceed vref-p)
+ If not specified, this is assumed to be analog ground.
+ - ti,acquisition-time: The number of conversion clock periods for the S/H's
+ acquisition time. Should be one of 6, 10, 18, 34. If not specified,
+ default value of 10 is used.
+ For high source impedances, this value can be increased to 18 or 34.
+ For less ADC accuracy and/or slower CCLK frequencies this value may be
+ decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the
+ datasheet for details.
+
+Example:
+adc@0 {
+ compatible = "ti,adc12138";
+ reg = <0>;
+ interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio1>;
+ clocks = <&cclk>;
+ vref-p-supply = <&ldo4_reg>;
+ spi-max-frequency = <5000000>;
+ ti,acquisition-time = <6>;
+};