summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt37
1 files changed, 0 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
deleted file mode 100644
index 049a1d36f013..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Texas Instruments' ADC12130/ADC12132/ADC12138
-
-Required properties:
- - compatible: Should be one of
- * "ti,adc12130"
- * "ti,adc12132"
- * "ti,adc12138"
- - reg: SPI chip select number for the device
- - interrupts: Should contain interrupt for EOC (end of conversion)
- - clocks: phandle to conversion clock input
- - spi-max-frequency: Definision as per
- Documentation/devicetree/bindings/spi/spi-bus.txt
- - vref-p-supply: The regulator supply for positive analog voltage reference
-
-Optional properties:
- - vref-n-supply: The regulator supply for negative analog voltage reference
- (Note that this must not go below GND or exceed vref-p)
- If not specified, this is assumed to be analog ground.
- - ti,acquisition-time: The number of conversion clock periods for the S/H's
- acquisition time. Should be one of 6, 10, 18, 34. If not specified,
- default value of 10 is used.
- For high source impedances, this value can be increased to 18 or 34.
- For less ADC accuracy and/or slower CCLK frequencies this value may be
- decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the
- datasheet for details.
-
-Example:
-adc@0 {
- compatible = "ti,adc12138";
- reg = <0>;
- interrupts = <28 IRQ_TYPE_EDGE_RISING>;
- interrupt-parent = <&gpio1>;
- clocks = <&cclk>;
- vref-p-supply = <&ldo4_reg>;
- spi-max-frequency = <5000000>;
- ti,acquisition-time = <6>;
-};