diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml new file mode 100644 index 000000000000..82b0eed6a7b7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5770R DAC device driver + +maintainers: + - Alexandru Tachici <alexandru.tachici@analog.com> + +description: | + Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be + found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf + +properties: + compatible: + enum: + - adi,ad5770r + + reg: + maxItems: 1 + + avdd-supply: + description: + AVdd voltage supply. Represents two different supplies in the datasheet + that are in fact the same. + + iovdd-supply: + description: + Voltage supply for the chip interface. + + vref-supply: + description: Specify the voltage of the external reference used. + Available reference options are 1.25 V or 2.5 V. If no + external reference declared then the device will use the + internal reference of 1.25 V. + + adi,external-resistor: + description: Specify if an external 2.5k ohm resistor is used. If not + specified the device will use an internal 2.5k ohm resistor. + The precision resistor is used for reference current generation. + type: boolean + + reset-gpios: + description: GPIO spec for the RESET pin. If specified, it will be + asserted during driver probe. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + channel@0: + description: Represents an external channel which are + connected to the DAC. Channel 0 can act both as a current + source and sink. + type: object + additionalProperties: false + + properties: + reg: + description: This represents the channel number. + const: 0 + + adi,range-microamp: + description: Output range of the channel. + oneOf: + - items: + - const: 0 + - const: 300000 + - items: + - const: -60000 + - const: 0 + - items: + - const: -60000 + - const: 300000 + + channel@1: + description: Represents an external channel which are + connected to the DAC. + type: object + additionalProperties: false + + properties: + reg: + description: This represents the channel number. + const: 1 + + adi,range-microamp: + description: Output range of the channel. + items: + - const: 0 + - enum: [140000, 250000] + + channel@2: + description: Represents an external channel which are + connected to the DAC. + type: object + additionalProperties: false + + properties: + reg: + description: This represents the channel number. + const: 2 + + adi,range-microamp: + description: Output range of the channel. + items: + - const: 0 + - enum: [55000, 150000] + +patternProperties: + "^channel@([3-5])$": + type: object + additionalProperties: false + description: Represents the external channels which are connected to the DAC. + properties: + reg: + description: This represents the channel number. + minimum: 3 + maximum: 5 + + adi,range-microamp: + description: Output range of the channel. + items: + - const: 0 + - enum: [45000, 100000] + +required: + - reg + - channel@0 + - channel@1 + - channel@2 + - channel@3 + - channel@4 + - channel@5 + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad5770r@0 { + compatible = "adi,ad5770r"; + reg = <0>; + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + adi,external-resistor; + reset-gpios = <&gpio 22 0>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + adi,range-microamp = <0 300000>; + }; + + channel@1 { + reg = <1>; + adi,range-microamp = <0 140000>; + }; + + channel@2 { + reg = <2>; + adi,range-microamp = <0 55000>; + }; + + channel@3 { + reg = <3>; + adi,range-microamp = <0 45000>; + }; + + channel@4 { + reg = <4>; + adi,range-microamp = <0 45000>; + }; + + channel@5 { + reg = <5>; + adi,range-microamp = <0 45000>; + }; + }; + }; +... |