summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt')
-rw-r--r--Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt31
1 files changed, 0 insertions, 31 deletions
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
deleted file mode 100644
index 465e104bbf14..000000000000
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* NXP FXAS21002C Gyroscope device tree bindings
-
-http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
-
-Required properties:
- - compatible : should be "nxp,fxas21002c"
- - reg : the I2C address of the sensor or SPI chip select number for the
- device.
- - vdd-supply: phandle to the regulator that provides power to the sensor.
- - vddio-supply: phandle to the regulator that provides power to the bus.
-
-Optional properties:
- - reset-gpios : gpio used to reset the device, see gpio/gpio.txt
- - interrupts : device support 2 interrupts, INT1 and INT2,
- the interrupts can be triggered on rising or falling edges.
- See interrupt-controller/interrupts.txt
- - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt
- line in use.
- - drive-open-drain: the interrupt/data ready line will be configured
- as open drain, which is useful if several sensors share
- the same interrupt line. This is a boolean property.
- (This binding is taken from pinctrl/pinctrl-bindings.txt)
-
-Example:
-
-gyroscope@20 {
- compatible = "nxp,fxas21002c";
- reg = <0x20>;
- vdd-supply = <&reg_peri_3p15v>;
- vddio-supply = <&reg_peri_3p15v>;
-};