diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
30 files changed, 933 insertions, 281 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt index f53237270b32..33da4a6fdb39 100644 --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -1,15 +1,21 @@ -* Bosch BMA180 / BMA25x triaxial acceleration sensor +* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor +https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf http://omapworld.com/BMA180_111_1002839.pdf http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf Required properties: - compatible : should be one of: + "bosch,bma023" + "bosch,bma150" "bosch,bma180" "bosch,bma250" "bosch,bma254" + "bosch,smb380" - reg : the I2C address of the sensor + - vdd-supply : regulator phandle connected to the VDD pin + - vddio-supply : regulator phandle connected to the VDDIO pin Optional properties: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index f0934b295edc..deb34deff0e8 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -72,8 +72,8 @@ patternProperties: The channel number. It can have up to 8 channels on ad7124-4 and 16 channels on ad7124-8, numbered from 0 to 15. items: - minimum: 0 - maximum: 15 + minimum: 0 + maximum: 15 adi,reference-select: description: | @@ -83,9 +83,8 @@ patternProperties: 1: REFIN2(+)/REFIN2(−). 3: AVDD If this field is left empty, internal reference is selected. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3] diff-channels: description: see Documentation/devicetree/bindings/iio/adc/adc.txt diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml new file mode 100644 index 000000000000..c4f57fa6aad1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD9467 High-Speed ADC + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Alexandru Ardelean <alexandru.ardelean@analog.com> + +description: | + The AD9467 is a 16-bit, monolithic, IF sampling analog-to-digital + converter (ADC). + + https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf + +properties: + compatible: + enum: + - adi,ad9467 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: adc-clk + + powerdown-gpios: + description: + Pin that controls the powerdown mode of the device. + maxItems: 1 + + reset-gpios: + description: + Reset pin for the device. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad9467"; + reg = <0>; + clocks = <&adc_clk>; + clock-names = "adc-clk"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml new file mode 100644 index 000000000000..0924b2b4972b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI ADC IP core + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + - Alexandru Ardelean <alexandru.ardelean@analog.com> + +description: | + Analog Devices Generic AXI ADC IP core for interfacing an ADC device + with a high speed serial (JESD204B/C) or source synchronous parallel + interface (LVDS/CMOS). + Usually, some other interface type (i.e SPI) is used as a control + interface for the actual ADC, while this IP core will interface + to the data-lines of the ADC and handle the streaming of data into + memory via DMA. + + https://wiki.analog.com/resources/fpga/docs/axi_adc_ip + +properties: + compatible: + enum: + - adi,axi-adc-10.0.a + + reg: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx + + adi,adc-dev: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A reference to a the actual ADC to which this FPGA ADC interfaces to. + +required: + - compatible + - dmas + - reg + - adi,adc-dev + +additionalProperties: false + +examples: + - | + axi-adc@44a00000 { + compatible = "adi,axi-adc-10.0.a"; + reg = <0x44a00000 0x10000>; + dmas = <&rx_dma 0>; + dma-names = "rx"; + + adi,adc-dev = <&spi_adc>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 118809a03279..6a991e9f78e2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -7,9 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology / Analog Devices LTC2496 ADC maintainers: - - Lars-Peter Clausen <lars@metafoo.de> - - Michael Hennerich <Michael.Hennerich@analog.com> - - Stefan Popa <stefan.popa@analog.com> + - Lars-Peter Clausen <lars@metafoo.de> + - Michael Hennerich <Michael.Hennerich@analog.com> + - Stefan Popa <stefan.popa@analog.com> properties: compatible: @@ -18,8 +18,7 @@ properties: vref-supply: description: phandle to an external regulator providing the reference voltage - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle + $ref: /schemas/types.yaml#/definitions/phandle reg: description: spi chipselect number according to the usual spi bindings diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml new file mode 100644 index 000000000000..f562505f5ecd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020 Alexandru Lazar +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX1241 12-bit, single-channel analog to digital converter + +maintainers: + - Alexandru Lazar <alazar@startmail.com> + +description: | + Bindings for the max1241 12-bit, single-channel ADC device. Datasheet + can be found at: + https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf + +properties: + compatible: + enum: + - maxim,max1241 + + reg: + maxItems: 1 + + vdd-supply: + description: + Device tree identifier of the regulator that powers the ADC. + + vref-supply: + description: + Device tree identifier of the regulator that provides the external + reference voltage. + + shutdown-gpios: + description: + GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If + specified, the /SHDN pin will be asserted between conversions, + thus enabling power-down mode. + maxItems: 1 + +required: + - compatible + - reg + - vdd-supply + - vref-supply + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "maxim,max1241"; + reg = <0>; + vdd-supply = <&adc_vdd>; + vref-supply = <&adc_vref>; + spi-max-frequency = <1000000>; + shutdown-gpios = <&gpio 26 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 8ffeceb6abae..95ab285f4eba 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -38,10 +38,9 @@ properties: microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1, 2, 3] - - default: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 vref-supply: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt deleted file mode 100644 index c2c50b59873d..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt +++ /dev/null @@ -1,37 +0,0 @@ -Rockchip Successive Approximation Register (SAR) A/D Converter bindings - -Required properties: -- compatible: should be "rockchip,<name>-saradc" or "rockchip,rk3066-tsadc" - - "rockchip,saradc": for rk3188, rk3288 - - "rockchip,rk3066-tsadc": for rk3036 - - "rockchip,rk3328-saradc", "rockchip,rk3399-saradc": for rk3328 - - "rockchip,rk3399-saradc": for rk3399 - - "rockchip,rv1108-saradc", "rockchip,rk3399-saradc": for rv1108 - -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for - the peripheral clock. -- vref-supply: The regulator supply ADC reference voltage. -- #io-channel-cells: Should be 1, see ../iio-bindings.txt - -Optional properties: -- resets: Must contain an entry for each entry in reset-names if need support - this option. See ../reset/reset.txt for details. -- reset-names: Must include the name "saradc-apb". - -Example: - saradc: saradc@2006c000 { - compatible = "rockchip,saradc"; - reg = <0x2006c000 0x100>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; - clock-names = "saradc", "apb_pclk"; - resets = <&cru SRST_SARADC>; - reset-names = "saradc-apb"; - #io-channel-cells = <1>; - vref-supply = <&vcc18>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml new file mode 100644 index 000000000000..bcff82a423bc --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Successive Approximation Register (SAR) A/D Converter + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,saradc + - const: rockchip,rk3066-tsadc + - const: rockchip,rk3399-saradc + - items: + - enum: + - rockchip,px30-saradc + - rockchip,rk3308-saradc + - rockchip,rk3328-saradc + - rockchip,rv1108-saradc + - const: rockchip,rk3399-saradc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: converter clock + - description: peripheral clock + + clock-names: + items: + - const: saradc + - const: apb_pclk + + resets: + maxItems: 1 + + reset-names: + const: saradc-apb + + vref-supply: + description: + The regulator supply for the ADC reference voltage. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; + vref-supply = <&vcc18>; + #io-channel-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 933ba37944d7..28417b31b558 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#" +$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: STMicroelectronics STM32 ADC bindings @@ -76,8 +76,7 @@ properties: description: Phandle to system configuration controller. It can be used to control the analog circuitry on stm32mp1. - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" interrupt-controller: true @@ -247,8 +246,7 @@ patternProperties: Resolution (bits) to use for conversions: - can be 6, 8, 10 or 12 on stm32f4 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 st,adc-channels: description: | @@ -256,8 +254,7 @@ patternProperties: - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and stm32mp1. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array st,adc-diff-channels: description: | @@ -270,18 +267,17 @@ patternProperties: required. Both properties can be used together. Some channels can be used as single-ended and some other ones as differential (mixed). But channels can't be configured both as single-ended and differential. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-matrix - - items: - items: - - description: | - "vinp" indicates positive input number - minimum: 0 - maximum: 19 - - description: | - "vinn" indicates negative input number - minimum: 0 - maximum: 19 + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "vinp" indicates positive input number + minimum: 0 + maximum: 19 + - description: | + "vinn" indicates negative input number + minimum: 0 + maximum: 19 st,min-sample-time-nsecs: description: @@ -291,8 +287,7 @@ patternProperties: array that matches "st,adc-channels" and/or "st,adc-diff-channels" list, to set sample time resp. for all channels, or independently for each channel. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array allOf: - if: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index b1627441a0b2..d61bc011e820 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -95,16 +95,14 @@ patternProperties: On stm32h7 and stm32mp1: - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7. - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 7 + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 7 st,adc-channel-names: description: List of single-ended channel names. - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | @@ -112,11 +110,10 @@ patternProperties: - 0: FastSinC - [1-5]: order 1 to 5. For audio purpose it is recommended to use order 3 to 5. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - items: - minimum: 0 - maximum: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 5 "#io-channel-cells": const: 1 @@ -130,8 +127,7 @@ patternProperties: - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0 items: enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-channel-clk-src: description: | @@ -142,8 +138,7 @@ patternProperties: - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). items: enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ] - allOf: - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array + $ref: /schemas/types.yaml#/definitions/non-unique-string-array st,adc-alt-channel: description: diff --git a/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml new file mode 100644 index 000000000000..52341c8bacd9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/ams,ccs811.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS CCS811 VOC Sensor + +maintainers: + - Narcisa Vasile <narcisaanamaria12@gmail.com> + +description: | + Ultra-Low Power Digital Gas Sensor for Monitoring Indoor Air Quality. + +properties: + compatible: + enum: + - ams,ccs811 + reg: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the nRESET line. This is an active low + input to CCS811. + maxItems: 1 + + wakeup-gpios: + description: GPIO connected to the nWAKE line. This is an active low + input to CCS811. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + voc@5b { + compatible = "ams,ccs811"; + reg = <0x5b>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml index edcd2904d50e..69e8931e0ae8 100644 --- a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml @@ -4,19 +4,21 @@ $id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Atlas Scientific OEM sensors +title: Atlas Scientific OEM + EZO sensors maintainers: - Matt Ranostay <matt.ranostay@konsulko.com> description: | - Atlas Scientific OEM sensors connected via I2C + Atlas Scientific OEM + EZO sensors connected via I2C Datasheets: http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf + http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf properties: compatible: @@ -25,6 +27,8 @@ properties: - atlas,ec-sm - atlas,orp-sm - atlas,ph-sm + - atlas,rtd-sm + - atlas,co2-ezo reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml new file mode 100644 index 000000000000..97ffcb77043d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/common.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for iio sensors + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + - Guido Günther <agx@sigxcpu.org> + +description: | + This document defines device tree properties common to several iio + sensors. It doesn't constitue a device tree binding specification by itself but + is meant to be referenced by device tree bindings. + + When referenced from sensor tree bindings the properties defined in this + document are defined as follows. The sensor tree bindings are responsible for + defining whether each property is required or optional. + +properties: + proximity-near-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + For proximity sensors whether an object can be considered near to the + device depends on parameters like sensor position, covering glass and + aperture. This value gives an indication to userspace for which + sensor readings this is the case. + + Raw proximity values equal or above this level should be + considered 'near' to the device (an object is near to the + sensor). + +... diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt index 338c3220f01a..1ab9570cf219 100644 --- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt +++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt @@ -1,4 +1,4 @@ -Linear Technology LTC2632/2636 DAC +Linear Technology LTC2632/2634/2636 DAC Required properties: - compatible: Has to contain one of the following: @@ -8,6 +8,12 @@ Required properties: lltc,ltc2632-h12 lltc,ltc2632-h10 lltc,ltc2632-h8 + lltc,ltc2634-l12 + lltc,ltc2634-l10 + lltc,ltc2634-l8 + lltc,ltc2634-h12 + lltc,ltc2634-h10 + lltc,ltc2634-h8 lltc,ltc2636-l12 lltc,ltc2636-l10 lltc,ltc2636-l8 diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt deleted file mode 100644 index bf2925c671c6..000000000000 --- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt +++ /dev/null @@ -1,63 +0,0 @@ -STMicroelectronics STM32 DAC - -The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC -may be configured in 8 or 12-bit mode. It has two output channels, each with -its own converter. -It has built-in noise and triangle waveform generator and supports external -triggers for conversions. The DAC's output buffer allows a high drive output -current. - -Contents of a stm32 dac root node: ------------------------------------ -Required properties: -- compatible: Should be one of: - "st,stm32f4-dac-core" - "st,stm32h7-dac-core" -- reg: Offset and length of the device's register set. -- clocks: Must contain an entry for pclk (which feeds the peripheral bus - interface) -- clock-names: Must be "pclk". -- vref-supply: Phandle to the vref+ input analog reference supply. -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- resets: Must contain the phandle to the reset controller. -- A pinctrl state named "default" for each DAC channel may be defined to set - DAC_OUTx pin in mode of operation for analog output on external pin. - -Contents of a stm32 dac child node: ------------------------------------ -DAC core node should contain at least one subnode, representing a -DAC instance/channel available on the machine. - -Required properties: -- compatible: Must be "st,stm32-dac". -- reg: Must be either 1 or 2, to define (single) channel in use -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in - Documentation/devicetree/bindings/iio/iio-bindings.txt - -Example: - dac: dac@40007400 { - compatible = "st,stm32h7-dac-core"; - reg = <0x40007400 0x400>; - clocks = <&clk>; - clock-names = "pclk"; - vref-supply = <®_vref>; - pinctrl-names = "default"; - pinctrl-0 = <&dac_out1 &dac_out2>; - #address-cells = <1>; - #size-cells = <0>; - - dac1: dac@1 { - compatible = "st,stm32-dac"; - #io-channels-cells = <1>; - reg = <1>; - }; - - dac2: dac@2 { - compatible = "st,stm32-dac"; - #io-channels-cells = <1>; - reg = <2>; - }; - }; diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml new file mode 100644 index 000000000000..393f7005941a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 DAC bindings + +description: | + The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC + may be configured in 8 or 12-bit mode. It has two output channels, each with + its own converter. + It has built-in noise and triangle waveform generator and supports external + triggers for conversions. The DAC's output buffer allows a high drive output + current. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@st.com> + +properties: + compatible: + enum: + - st,stm32f4-dac-core + - st,stm32h7-dac-core + + reg: + maxItems: 1 + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pclk + + vref-supply: + description: Phandle to the vref input analog reference voltage. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - vref-supply + - '#address-cells' + - '#size-cells' + +patternProperties: + "^dac@[1-2]+$": + type: object + description: + A DAC block node should contain at least one subnode, representing an + DAC instance/channel available on the machine. + + properties: + compatible: + const: st,stm32-dac + + reg: + description: Must be either 1 or 2, to define (single) channel in use + enum: [1, 2] + + '#io-channel-cells': + const: 1 + + additionalProperties: false + + required: + - compatible + - reg + - '#io-channel-cells' + +examples: + - | + // Example on stm32mp157c + #include <dt-bindings/clock/stm32mp1-clks.h> + dac: dac@40017000 { + compatible = "st,stm32h7-dac-core"; + reg = <0x40017000 0x400>; + clocks = <&rcc DAC12>; + clock-names = "pclk"; + vref-supply = <&vref>; + #address-cells = <1>; + #size-cells = <0>; + + dac@1 { + compatible = "st,stm32-dac"; + #io-channel-cells = <1>; + reg = <1>; + }; + + dac@2 { + compatible = "st,stm32-dac"; + #io-channel-cells = <1>; + reg = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt index 78e18a1e9c1d..bb43d1ad9c9f 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt +++ b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt @@ -2,7 +2,7 @@ Required properties: - - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro" + - compatible : should be "bosch,bmg160", "bosch,bmi055_gyro" or "bosch,bmi088_gyro" - reg : the I2C address of the sensor (0x69) Optional properties: diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml new file mode 100644 index 000000000000..98baecb4b98a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/adi,adis16475.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADIS16475 and similar IMUs + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices ADIS16475 and similar IMUs + https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16475.pdf + +properties: + compatible: + enum: + - adi,adis16475-1 + - adi,adis16475-2 + - adi,adis16475-3 + - adi,adis16477-1 + - adi,adis16477-2 + - adi,adis16477-3 + - adi,adis16470 + - adi,adis16465-1 + - adi,adis16465-2 + - adi,adis16465-3 + - adi,adis16467-1 + - adi,adis16467-2 + - adi,adis16467-3 + - adi,adis16500 + - adi,adis16505-1 + - adi,adis16505-2 + - adi,adis16505-3 + - adi,adis16507-1 + - adi,adis16507-2 + - adi,adis16507-3 + + reg: + maxItems: 1 + + spi-cpha: true + + spi-cpol: true + + spi-max-frequency: + maximum: 2000000 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-gpios: + description: + Must be the device tree identifier of the RESET pin. If specified, + it will be asserted during driver probe. As the line is active low, + it should be marked GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,sync-mode: + description: + Configures the device SYNC pin. The following modes are supported + 0 - output_sync + 1 - direct_sync + 2 - scaled_sync + 3 - pulse_sync + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + + adi,scaled-output-hz: + description: + This property must be present if the clock mode is scaled-sync through + clock-names property. In this mode, the input clock can have a range + of 1Hz to 128HZ which must be scaled to originate an allowable sample + rate. This property specifies that rate. + minimum: 1900 + maximum: 2100 + +required: + - compatible + - reg + - interrupts + - spi-cpha + - spi-cpol + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,adis16500 + - adi,adis16505-1 + - adi,adis16505-2 + - adi,adis16505-3 + - adi,adis16507-1 + - adi,adis16507-2 + - adi,adis16507-3 + + then: + properties: + adi,sync-mode: + minimum: 0 + maximum: 2 + + - if: + properties: + adi,sync-mode: + enum: [1, 2, 3] + + then: + dependencies: + adi,sync-mode: [ clocks ] + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adis16475: adis16475-3@0 { + compatible = "adi,adis16475-3"; + reg = <0>; + spi-cpha; + spi-cpol; + spi-max-frequency = <2000000>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.txt b/Documentation/devicetree/bindings/iio/imu/bmi160.txt deleted file mode 100644 index 900c169de00f..000000000000 --- a/Documentation/devicetree/bindings/iio/imu/bmi160.txt +++ /dev/null @@ -1,37 +0,0 @@ -Bosch BMI160 - Inertial Measurement Unit with Accelerometer, Gyroscope -and externally connectable Magnetometer - -https://www.bosch-sensortec.com/bst/products/all_products/bmi160 - -Required properties: - - compatible : should be "bosch,bmi160" - - reg : the I2C address or SPI chip select number of the sensor - - spi-max-frequency : set maximum clock frequency (only for SPI) - -Optional properties: - - interrupts : interrupt mapping for IRQ - - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt - input, set to "INT2" if INT2 pin should be used instead - - drive-open-drain : set if the specified interrupt pin should be configured as - open drain. If not set, defaults to push-pull. - -Examples: - -bmi160@68 { - compatible = "bosch,bmi160"; - reg = <0x68>; - - interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; -}; - -bmi160@0 { - compatible = "bosch,bmi160"; - reg = <0>; - spi-max-frequency = <10000000>; - - interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "INT2"; -}; diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml new file mode 100644 index 000000000000..0d0ef84e22b9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI160 + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Inertial Measurement Unit with Accelerometer, Gyroscope and externally + connectable Magnetometer + https://www.bosch-sensortec.com/bst/products/all_products/bmi160 + +properties: + compatible: + const: bosch,bmi160 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + enum: + - INT1 + - INT2 + description: | + set to "INT1" if INT1 pin should be used as interrupt input, set + to "INT2" if INT2 pin should be used instead + + drive-open-drain: + description: | + set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. + +required: + - compatible + - reg + +examples: + - | + // Example for I2C + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bmi160@68 { + compatible = "bosch,bmi160"; + reg = <0x68>; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; + - | + // Example for SPI + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + bmi160@0 { + compatible = "bosch,bmi160"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml new file mode 100644 index 000000000000..efd2eba5f23c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMS TAOS TSL2563 ambient light sensor + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + Ambient light sensor with an i2c interface. + +properties: + compatible: + enum: + - amstaos,tsl2560 + - amstaos,tsl2561 + - amstaos,tsl2562 + - amstaos,tsl2563 + + reg: + maxItems: 1 + + amstaos,cover-comp-gain: + description: Multiplier for gain compensation + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 16] + +required: + - compatible + - reg + +examples: + - | + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@29 { + compatible = "amstaos,tsl2563"; + reg = <0x29>; + amstaos,cover-comp-gain = <16>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/light/tsl2563.txt b/Documentation/devicetree/bindings/iio/light/tsl2563.txt deleted file mode 100644 index f91e809e736e..000000000000 --- a/Documentation/devicetree/bindings/iio/light/tsl2563.txt +++ /dev/null @@ -1,19 +0,0 @@ -* AMS TAOS TSL2563 ambient light sensor - -Required properties: - - - compatible : should be "amstaos,tsl2563" - - reg : the I2C address of the sensor - -Optional properties: - - - amstaos,cover-comp-gain : integer used as multiplier for gain - compensation (default = 1) - -Example: - -tsl2563@29 { - compatible = "amstaos,tsl2563"; - reg = <0x29>; - amstaos,cover-comp-gain = <16>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml index e8f7d1ada57b..d81229857944 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml @@ -33,13 +33,12 @@ properties: amstaos,proximity-diodes: description: Proximity diodes to enable - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 2 - items: - minimum: 0 - maximum: 1 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt b/Documentation/devicetree/bindings/iio/light/vcnl4000.txt deleted file mode 100644 index 955af4555c90..000000000000 --- a/Documentation/devicetree/bindings/iio/light/vcnl4000.txt +++ /dev/null @@ -1,24 +0,0 @@ -VISHAY VCNL4000 - Ambient Light and proximity sensor - -This driver supports the VCNL4000/10/20/40 and VCNL4200 chips - -Required properties: - - -compatible: must be one of : - vishay,vcnl4000 - vishay,vcnl4010 - vishay,vcnl4020 - vishay,vcnl4040 - vishay,vcnl4200 - - -reg: I2C address of the sensor, should be one from below based on the model: - 0x13 - 0x51 - 0x60 - -Example: - -light-sensor@51 { - compatible = "vishay,vcnl4200"; - reg = <0x51>; -}; diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml new file mode 100644 index 000000000000..da8f2e872535 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VISHAY VCNL4000 ambient light and proximity sensor + +maintainers: + - Peter Meerwald <pmeerw@pmeerw.net> + +description: | + Ambient light sensing with proximity detection over an i2c + interface. + +allOf: + - $ref: ../common.yaml# + +properties: + compatible: + enum: + - vishay,vcnl4000 + - vishay,vcnl4010 + - vishay,vcnl4020 + - vishay,vcnl4040 + - vishay,vcnl4200 + reg: + maxItems: 1 + + proximity-near-level: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: +- | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@51 { + compatible = "vishay,vcnl4200"; + reg = <0x51>; + proximity-near-level = <220>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt index baecc4a85197..7f06eff3b504 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt @@ -2,7 +2,9 @@ Required properties: -- compatible : should be "asahi-kasei,ak8974" +- compatible: + * "asahi-kasei,ak8974" + * "alps,hscdtd008a" - reg : the I2C address of the magnetometer Optional properties: diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml new file mode 100644 index 000000000000..4190253336ec --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Integrated Proximity Sensor With Infrared Emitter + +maintainers: + - Ivan Mikhaylov <i.mikhaylov@yadro.com> + +description: | + The VCNL3020 is a fully integrated proximity sensor. Fully integrated means + that the infrared emitter is included in the package. It has 16-bit + resolution. It includes a signal processing IC and features standard I2C + communication interface. It features an interrupt function. + + Specifications about the devices can be found at: + https://www.vishay.com/docs/84150/vcnl3020.pdf + +properties: + compatible: + enum: + - vishay,vcnl3020 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + vishay,led-current-microamp: + description: + The driver current for the LED used in proximity sensing. + enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000, + 100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000, + 180000, 190000, 200000] + default: 20000 + +required: + - compatible + - reg + +examples: + - | + i2c { + + #address-cells = <1>; + #size-cells = <0>; + + proximity@13 { + compatible = "vishay,vcnl3020"; + reg = <0x13>; + vishay,led-current-microamp = <200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 0ef64a444479..3213599c5071 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -50,6 +50,7 @@ Accelerometers: - st,lis3dhh - st,lis3de - st,lis2de12 +- st,lis2hh12 Gyroscopes: - st,l3g4200d-gyro diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 8fb46de6641d..40ccbe7b5c13 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 '#address-cells': const: 1 @@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9 @@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended: @@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18 @@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] adi,rsense-share: description: @@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64 @@ -260,7 +252,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ adi,rsense-share ] + adi,current-rotate: [ "adi,rsense-share" ] "^thermistor@": type: object @@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27 @@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] adi,custom-thermistor: description: @@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6 @@ -349,7 +337,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ adi,rsense-share ] + adi,current-rotate: [ "adi,rsense-share" ] "^adc@": type: object @@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended: @@ -379,8 +366,7 @@ patternProperties: adi,sensor-type: description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms: |