diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
17 files changed, 454 insertions, 456 deletions
diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml index 2a9bb6ace021..24dc2d69613f 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/input/elan,ekth3000.yaml# diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index 05e6f2df604c..dc4ac41f2441 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -13,10 +13,14 @@ description: Supports the Elan eKTH6915 touchscreen controller. This touchscreen controller uses the i2c-hid protocol with a reset GPIO. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: - items: - - const: elan,ekth6915 + enum: + - elan,ekth6915 + - ilitek,ili2901 reg: const: 0x10 @@ -24,6 +28,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: description: Reset GPIO; not all touchscreens using eKTH6915 hook this up. diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml index 1edad1da1196..358cb8275bf1 100644 --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml @@ -14,6 +14,9 @@ description: This touchscreen uses the i2c-hid protocol but has some non-standard power sequencing required. +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + properties: compatible: oneOf: @@ -30,6 +33,8 @@ properties: interrupts: maxItems: 1 + panel: true + reset-gpios: true diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml index 7156b08f7645..138caad96a29 100644 --- a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml @@ -44,6 +44,8 @@ properties: description: HID descriptor address $ref: /schemas/types.yaml#/definitions/uint32 + panel: true + post-power-on-delay-ms: description: Time required by the device after enabling its regulators or powering it on, before it is ready for communication. diff --git a/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml new file mode 100644 index 000000000000..c5d9e0e919f9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ili9882t touchscreen controller + +maintainers: + - Cong Yang <yangcong5@huaqin.corp-partner.google.com> + +description: + Supports the Ilitek ili9882t touchscreen controller. + This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + +properties: + compatible: + const: ilitek,ili9882t + + reg: + const: 0x41 + + interrupts: + maxItems: 1 + + panel: true + + reset-gpios: + maxItems: 1 + description: Reset GPIO. + + vccio-supply: + description: The 1.8V supply to the touchscreen. + +required: + - compatible + - reg + - interrupts + - panel + - vccio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: touchscreen@41 { + compatible = "ilitek,ili9882t"; + reg = <0x41>; + + interrupt-parent = <&pio>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + panel = <&panel>; + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>; + vccio-supply = <&mt6366_vio18_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml new file mode 100644 index 000000000000..88764adcd696 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8921-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8921 PMIC KeyPad + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + +allOf: + - $ref: input.yaml# + - $ref: matrix-keymap.yaml# + +properties: + compatible: + enum: + - qcom,pm8058-keypad + - qcom,pm8921-keypad + + reg: + maxItems: 1 + + interrupts: + items: + - description: key sense + - description: key stuck + + wakeup-source: + type: boolean + description: use any event on keypad as wakeup event + + linux,keypad-wakeup: + type: boolean + deprecated: true + description: legacy version of the wakeup-source property + + debounce: + description: + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + scan-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: time in microseconds to pause between successive scans of the + matrix array + + row-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: time in nanoseconds to pause between scans of each row in the + matrix array. + +required: + - compatible + - reg + - interrupts + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmic { + #address-cells = <1>; + #size-cells = <0>; + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt deleted file mode 100644 index 4a9dc6ba96b1..000000000000 --- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +++ /dev/null @@ -1,90 +0,0 @@ -Qualcomm PM8xxx PMIC Keypad - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058-keypad" - "qcom,pm8921-keypad" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: address of keypad control register - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: the first interrupt specifies the key sense interrupt - and the second interrupt specifies the key stuck interrupt. - The format of the specifier is defined by the binding - document describing the node's interrupt parent. - -- linux,keymap: - Usage: required - Value type: <prop-encoded-array> - Definition: the linux keymap. More information can be found in - input/matrix-keymap.txt. - -- linux,keypad-no-autorepeat: - Usage: optional - Value type: <bool> - Definition: don't enable autorepeat feature. - -- wakeup-source: - Usage: optional - Value type: <bool> - Definition: use any event on keypad as wakeup event. - (Legacy property supported: "linux,keypad-wakeup") - -- keypad,num-rows: - Usage: required - Value type: <u32> - Definition: number of rows in the keymap. More information can be found - in input/matrix-keymap.txt. - -- keypad,num-columns: - Usage: required - Value type: <u32> - Definition: number of columns in the keymap. More information can be - found in input/matrix-keymap.txt. - -- debounce: - Usage: optional - Value type: <u32> - Definition: time in microseconds that key must be pressed or release - for key sense interrupt to trigger. - -- scan-delay: - Usage: optional - Value type: <u32> - Definition: time in microseconds to pause between successive scans - of the matrix array. - -- row-hold: - Usage: optional - Value type: <u32> - Definition: time in nanoseconds to pause between scans of each row in - the matrix array. - -EXAMPLE - - keypad@148 { - compatible = "qcom,pm8921-keypad"; - reg = <0x148>; - interrupt-parent = <&pmicintc>; - interrupts = <74 1>, <75 1>; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_VOLUMEUP) - MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) - MATRIX_KEY(0, 3, KEY_CAMERA) - >; - keypad,num-rows = <1>; - keypad,num-columns = <5>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt deleted file mode 100644 index 9afffbdf6e28..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 2D Sensor Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain 2D sensors using Function 11 or -Function 12. Complete documentation for transports and other functions -can be found in: -Documentation/devicetree/bindings/input/rmi4. - -RMI4 Function 11 and Function 12 are for 2D touch position sensing. -Additional documentation for F11 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touchscreen -- touchscreen-inverted-x -- touchscreen-inverted-y -- touchscreen-swapped-x-y -- touchscreen-x-mm -- touchscreen-y-mm - -Optional Properties: -- syna,clip-x-low: Sets a minimum value for X. -- syna,clip-y-low: Sets a minimum value for Y. -- syna,clip-x-high: Sets a maximum value for X. -- syna,clip-y-high: Sets a maximum value for Y. -- syna,offset-x: Add an offset to X. -- syna,offset-y: Add an offset to Y. -- syna,delta-x-threshold: Set the minimum distance on the X axis required - to generate an interrupt in reduced reporting - mode. -- syna,delta-y-threshold: Set the minimum distance on the Y axis required - to generate an interrupt in reduced reporting - mode. -- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad. -- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to - disable reporing absolute position data. -- syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero - command. - - -Example of a RMI4 I2C device with F11: -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt deleted file mode 100644 index 079cad2b6843..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt +++ /dev/null @@ -1,39 +0,0 @@ -Synaptics RMI4 F01 Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices which contain Function 1. Complete documentation -for transports and other functions can be found in: -Documentation/devicetree/bindings/input/rmi4. - -Additional documentation for F01 can be found at: -http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf - -Optional Properties: -- syna,nosleep-mode: If set the device will run at full power without sleeping. - nosleep has 3 modes, 0 will not change the default - setting, 1 will disable nosleep (allow sleeping), - and 2 will enable nosleep (disabling sleep). -- syna,wakeup-threshold: Defines the amplitude of the disturbance to the - background capacitance that will cause the - device to wake from dozing. -- syna,doze-holdoff-ms: The delay to wait after the last finger lift and the - first doze cycle. -- syna,doze-interval-ms: The time period that the device sleeps between finger - activity. - - -Example of a RMI4 I2C device with F01: - Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - - ... - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt deleted file mode 100644 index dcb012f5b3ee..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt +++ /dev/null @@ -1,61 +0,0 @@ -Synaptics RMI4 I2C Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the I2C transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-i2c -- reg: I2C address -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- syna,reset-delay-ms: The number of milliseconds to wait after resetting the - device. - -- syna,startup-delay-ms: The number of milliseconds to wait after powering on - the device. - -- vdd-supply: VDD power supply. -See ../regulator/regulator.txt - -- vio-supply: VIO power supply -See ../regulator/regulator.txt - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - &i2c1 { - rmi4-i2c-dev@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio>; - interrupts = <4 2>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt deleted file mode 100644 index 632f473db65b..000000000000 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt +++ /dev/null @@ -1,56 +0,0 @@ -Synaptics RMI4 SPI Device Binding - -The Synaptics RMI4 core is able to support RMI4 devices using different -transports and different functions. This file describes the device tree -bindings for devices using the SPI transport driver. Complete documentation -for other transports and functions can be found in -Documentation/devicetree/bindings/input/rmi4. - -Required Properties: -- compatible: syna,rmi4-spi -- reg: Chip select address for the device -- #address-cells: Set to 1 to indicate that the function child nodes - consist of only on uint32 value. -- #size-cells: Set to 0 to indicate that the function child nodes do not - have a size property. - -Optional Properties: -- interrupts: interrupt which the rmi device is connected to. -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -- spi-rx-delay-us: microsecond delay after a read transfer. -- spi-tx-delay-us: microsecond delay after a write transfer. - -Function Parameters: -Parameters specific to RMI functions are contained in child nodes of the rmi device - node. Documentation for the parameters of each function can be found in: -Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt. - - - -Example: - spi@7000d800 { - rmi4-spi-dev@0 { - compatible = "syna,rmi4-spi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <4000000>; - spi-cpha; - spi-cpol; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(K, 2) 0x2>; - spi-rx-delay-us = <30>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-y; - syna,sensor-type = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt deleted file mode 100644 index 12bb771d66d4..000000000000 --- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt +++ /dev/null @@ -1,41 +0,0 @@ -* STMPE Keypad - -Required properties: - - compatible : "st,stmpe-keypad" - - linux,keymap : See ./matrix-keymap.txt - -Optional properties: - - debounce-interval : Debouncing interval time in milliseconds - - st,scan-count : Scanning cycles elapsed before key data is updated - - st,no-autorepeat : If specified device will not autorepeat - - keypad,num-rows : See ./matrix-keymap.txt - - keypad,num-columns : See ./matrix-keymap.txt - -Example: - - stmpe_keypad { - compatible = "st,stmpe-keypad"; - - debounce-interval = <64>; - st,scan-count = <8>; - st,no-autorepeat; - - linux,keymap = <0x205006b - 0x4010074 - 0x3050072 - 0x1030004 - 0x502006a - 0x500000a - 0x5008b - 0x706001c - 0x405000b - 0x6070003 - 0x3040067 - 0x303006c - 0x60400e7 - 0x602009e - 0x4020073 - 0x5050002 - 0x4030069 - 0x3020008>; - }; diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml new file mode 100644 index 000000000000..b522c8d3ce0d --- /dev/null +++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml @@ -0,0 +1,273 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/syna,rmi4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics RMI4 compliant devices + +maintainers: + - Jason A. Donenfeld <Jason@zx2c4.com> + - Matthias Schiffer <matthias.schiffer@ew.tq-group.com + - Vincent Huang <vincent.huang@tw.synaptics.com> + +description: | + The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4 + devices using different transports (I2C, SPI) and different functions (e.g. + Function 1, 2D sensors using Function 11 or 12). + +properties: + compatible: + enum: + - syna,rmi4-i2c + - syna,rmi4-spi + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: Active low signal + + spi-cpha: true + spi-cpol: true + + syna,reset-delay-ms: + description: + Delay to wait after resetting the device. + + syna,startup-delay-ms: + description: + Delay to wait after powering on the device. + + vdd-supply: true + vio-supply: true + + rmi4-f01@1: + type: object + additionalProperties: false + description: + Function 1 + + properties: + reg: + maxItems: 1 + + syna,nosleep-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + If set the device will run at full power without sleeping. nosleep + has 3 modes, 0 will not change the default setting, 1 will disable + nosleep (allow sleeping), and 2 will enable nosleep (disabling + sleep). + + syna,wakeup-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the amplitude of the disturbance to the background + capacitance that will cause the device to wake from dozing. + + syna,doze-holdoff-ms: + description: + The delay to wait after the last finger lift and the first doze + cycle. + + syna,doze-interval-ms: + description: + The time period that the device sleeps between finger activity. + + required: + - reg + +patternProperties: + "^rmi4-f1[12]@1[12]$": + type: object + unevaluatedProperties: false + $ref: /schemas/input/touchscreen/touchscreen.yaml# + description: + RMI4 Function 11 and Function 12 are for 2D touch position sensing. + + properties: + reg: + maxItems: 1 + + syna,clip-x-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for X. + + syna,clip-y-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum value for Y. + + syna,clip-x-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for X. + + syna,clip-y-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum value for Y. + + syna,offset-x: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to X. + + syna,offset-y: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Add an offset to Y. + + syna,delta-x-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the X axis required to generate an interrupt in + reduced reporting mode. + + syna,delta-y-threshold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum distance on the Y axis required to generate an interrupt in + reduced reporting mode. + + syna,sensor-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + description: | + Sensor type: 1 for touchscreen 2 for touchpad. + + syna,disable-report-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Mask for disabling posiiton reporting. Used to disable reporing + absolute position data. + + syna,rezero-wait-ms: + description: + Time to wait after issuing a rezero command. + + required: + - reg + + "^rmi4-f[0-9a-f]+@[0-9a-f]+$": + type: object + additionalProperties: true + + description: + Other functions, not documented yet. + + properties: + reg: + maxItems: 1 + + required: + - reg + +required: + - compatible + - reg + +unevaluatedProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + - if: + properties: + compatible: + contains: + const: syna,rmi4-i2c + then: + properties: + spi-rx-delay-us: false + spi-tx-delay-us: false + else: + properties: + syna,reset-delay-ms: false + syna,startup-delay-ms: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + syna,startup-delay-ms = <100>; + vdd-supply = <&tsp_vdd>; + vio-supply = <&ldo32_reg>; + + pinctrl-0 = <&touch_irq>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + + rmi4-f1a@1a { + reg = <0x1a>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@0 { + compatible = "syna,rmi4-spi"; + reg = <0x0>; + interrupt-parent = <&gpx1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + spi-max-frequency = <4000000>; + spi-rx-delay-us = <30>; + spi-cpha; + spi-cpol; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-y; + syna,sensor-type = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt deleted file mode 100644 index 238b51555c04..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ /dev/null @@ -1,108 +0,0 @@ -STMPE Touchscreen ----------------- - -Required properties: - - compatible: "st,stmpe-ts" - -Optional properties: -- st,ave-ctrl : Sample average control - 0 -> 1 sample - 1 -> 2 samples - 2 -> 4 samples - 3 -> 8 samples -- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) - 0 -> 10 us - 1 -> 50 us - 2 -> 100 us - 3 -> 500 us - 4 -> 1 ms - 5 -> 5 ms - 6 -> 10 ms - 7 -> 50 ms -- st,settling : Panel driver settling time (recommended is 2) - 0 -> 10 us - 1 -> 100 us - 2 -> 500 us - 3 -> 1 ms - 4 -> 5 ms - 5 -> 10 ms - 6 -> 50 ms - 7 -> 100 ms -- st,fraction-z : Length of the fractional part in z (recommended is 7) - (fraction-z ([0..7]) = Count of the fractional part) -- st,i-drive : current limit value of the touchscreen drivers - 0 -> 20 mA (typical 35mA max) - 1 -> 50 mA (typical 80 mA max) - -Optional properties common with MFD (deprecated): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks - 1 -> 44 clocks - 2 -> 56 clocks - 3 -> 64 clocks - 4 -> 80 clocks (recommended) - 5 -> 96 clocks - 6 -> 124 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC - 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal - 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz - 1 -> 3.25 MHz - 2 || 3 -> 6.5 MHz - -Node should be child node of stmpe node to which it belongs. - -Note that common ADC settings of stmpe_touchscreen (child) will take precedence -over the settings done in MFD. - -Example: - -stmpe811@41 { - compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio4>; - interrupt-controller; - id = <0>; - blocks = <0x5>; - irq-trigger = <0x1>; - /* Common ADC settings */ - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - /* 8 sample average control */ - st,ave-ctrl = <3>; - /* 5 ms touch detect interrupt delay */ - st,touch-det-delay = <5>; - /* 1 ms panel driver settling time */ - st,settling = <3>; - /* 7 length fractional part in z */ - st,fraction-z = <7>; - /* - * 50 mA typical 80 mA max touchscreen drivers - * current limit value - */ - st,i-drive = <1>; - }; - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; - }; -}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 895592da9626..431c13335c40 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -10,6 +10,13 @@ maintainers: - Dmitry Torokhov <dmitry.torokhov@gmail.com> properties: + panel: + description: If this touchscreen is integrally connected to a panel, this + is a reference to that panel. The presence of this reference indicates + that the touchscreen should be power sequenced together with the panel + and that they may share power and/or reset signals. + $ref: /schemas/types.yaml#/definitions/phandle + touchscreen-min-x: description: minimum x coordinate reported $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt index ed00f61b8c08..210486a3fb11 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt @@ -6,7 +6,7 @@ Required properties: - ti,x-plate-ohms: X-plate resistance in ohms. Optional properties: -- gpios: the interrupt gpio the chip is connected to (trough the penirq pin). +- gpios: the interrupt gpio the chip is connected to (through the penirq pin). The penirq pin goes to low when the panel is touched. (see GPIO binding[1] for more details). - interrupts: (gpio) interrupt to which the chip is connected diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt index f5021214edec..6c201a2ba8ac 100644 --- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt +++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt @@ -1,7 +1,7 @@ Texas Instruments TWL family (twl4030) pwrbutton module This module is part of the TWL4030. For more details about the whole -chip see Documentation/devicetree/bindings/mfd/twl-family.txt. +chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml. This module provides a simple power button event via an Interrupt. |