summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml')
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml102
1 files changed, 102 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
new file mode 100644
index 000000000000..cff6a956afb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Router
+
+maintainers:
+ - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+ The Interrupt Router (INTR) module provides a mechanism to mux M
+ interrupt inputs to N interrupt outputs, where all M inputs are selectable
+ to be driven per N output. An Interrupt Router can either handle edge
+ triggered or level triggered interrupts and that is fixed in hardware.
+
+ Interrupt Router
+ +----------------------+
+ | Inputs Outputs |
+ +-------+ | +------+ +-----+ |
+ | GPIO |----------->| | irq0 | | 0 | | Host IRQ
+ +-------+ | +------+ +-----+ | controller
+ | . . | +-------+
+ +-------+ | . . |----->| IRQ |
+ | INTA |----------->| . . | +-------+
+ +-------+ | . +-----+ |
+ | +------+ | N | |
+ | | irqM | +-----+ |
+ | +------+ |
+ | |
+ +----------------------+
+
+ There is one register per output (MUXCNTL_N) that controls the selection.
+ Configuration of these MUXCNTL_N registers is done by a system controller
+ (like the Device Memory and Security Controller on K3 AM654 SoC). System
+ controller will keep track of the used and unused registers within the Router.
+ Driver should request the system controller to get the range of GIC IRQs
+ assigned to the requesting hosts. It is the drivers responsibility to keep
+ track of Host IRQs.
+
+ Communication between the host processor running an OS and the system
+ controller happens through a protocol called TI System Control Interface
+ (TISCI protocol).
+
+properties:
+ compatible:
+ const: ti,sci-intr
+
+ ti,intr-trigger-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 4]
+ description: |
+ Should be one of the following.
+ 1 = If intr supports edge triggered interrupts.
+ 4 = If intr supports level triggered interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+ description: |
+ The 1st cell should contain interrupt router input hw number.
+
+ ti,interrupt-ranges:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ Interrupt ranges that converts the INTR output hw irq numbers
+ to parents's input interrupt numbers.
+ items:
+ items:
+ - description: |
+ "output_irq" specifies the base for intr output irq
+ - description: |
+ "parent's input irq" specifies the base for parent irq
+ - description: |
+ "limit" specifies the limit for translation
+
+required:
+ - compatible
+ - ti,intr-trigger-type
+ - interrupt-controller
+ - '#interrupt-cells'
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,interrupt-ranges
+
+examples:
+ - |
+ main_gpio_intr: interrupt-controller0 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <131>;
+ ti,interrupt-ranges = <0 360 32>;
+ };