diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller')
3 files changed, 103 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index 6a32922a55b8..33a98eb44949 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -11,6 +11,7 @@ Required properties: "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 + "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 "mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755 "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592 "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589 diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt new file mode 100644 index 000000000000..b0a8af51c388 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt @@ -0,0 +1,44 @@ +RISC-V Hart-Level Interrupt Controller (HLIC) +--------------------------------------------- + +RISC-V cores include Control Status Registers (CSRs) which are local to each +CPU core (HART in RISC-V terminology) and can be read or written by software. +Some of these CSRs are used to control local interrupts connected to the core. +Every interrupt is ultimately routed through a hart's HLIC before it +interrupts that hart. + +The RISC-V supervisor ISA manual specifies three interrupt sources that are +attached to every HLIC: software interrupts, the timer interrupt, and external +interrupts. Software interrupts are used to send IPIs between cores. The +timer interrupt comes from an architecturally mandated real-time timer that is +controller via Supervisor Binary Interface (SBI) calls and CSR reads. External +interrupts connect all other device interrupts to the HLIC, which are routed +via the platform-level interrupt controller (PLIC). + +All RISC-V systems that conform to the supervisor ISA specification are +required to have a HLIC with these three interrupt sources present. Since the +interrupt map is defined by the ISA it's not listed in the HLIC's device tree +entry, though external interrupt controllers (like the PLIC, for example) will +need to define how their interrupts map to the relevant HLICs. This means +a PLIC interrupt property will typically list the HLICs for all present HARTs +in the system. + +Required properties: +- compatible : "riscv,cpu-intc" +- #interrupt-cells : should be <1> +- interrupt-controller : Identifies the node as an interrupt controller + +Furthermore, this interrupt-controller MUST be embedded inside the cpu +definition of the hart whose CSRs control these local interrupts. + +An example device tree entry for a HLIC is show below. + + cpu1: cpu@1 { + compatible = "riscv"; + ... + cpu1-intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc"; + interrupt-controller; + }; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt new file mode 100644 index 000000000000..6adf7a6e8825 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt @@ -0,0 +1,58 @@ +SiFive Platform-Level Interrupt Controller (PLIC) +------------------------------------------------- + +SiFive SOCs include an implementation of the Platform-Level Interrupt Controller +(PLIC) high-level specification in the RISC-V Privileged Architecture +specification. The PLIC connects all external interrupts in the system to all +hart contexts in the system, via the external interrupt source in each hart. + +A hart context is a privilege mode in a hardware execution thread. For example, +in an 4 core system with 2-way SMT, you have 8 harts and probably at least two +privilege modes per hart; machine mode and supervisor mode. + +Each interrupt can be enabled on per-context basis. Any context can claim +a pending enabled interrupt and then release it once it has been handled. + +Each interrupt has a configurable priority. Higher priority interrupts are +serviced first. Each context can specify a priority threshold. Interrupts +with priority below this threshold will not cause the PLIC to raise its +interrupt line leading to the context. + +While the PLIC supports both edge-triggered and level-triggered interrupts, +interrupt handlers are oblivious to this distinction and therefore it is not +specified in the PLIC device-tree binding. + +While the RISC-V ISA doesn't specify a memory layout for the PLIC, the +"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that +contains a specific memory layout, which is documented in chapter 8 of the +SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>. + +Required properties: +- compatible : "sifive,plic-1.0.0" and a string identifying the actual + detailed implementation in case that specific bugs need to be worked around. +- #address-cells : should be <0> or more. +- #interrupt-cells : should be <1> or more. +- interrupt-controller : Identifies the node as an interrupt controller. +- reg : Should contain 1 register range (address and length). +- interrupts-extended : Specifies which contexts are connected to the PLIC, + with "-1" specifying that a context is not present. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node as parent. +- riscv,ndev: Specifies how many external interrupts are supported by + this controller. + +Example: + + plic: interrupt-controller@c000000 { + #address-cells = <0>; + #interrupt-cells = <1>; + compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic"; + interrupt-controller; + interrupts-extended = < + &cpu0-intc 11 + &cpu1-intc 11 &cpu1-intc 9 + &cpu2-intc 11 &cpu2-intc 9 + &cpu3-intc 11 &cpu3-intc 9 + &cpu4-intc 11 &cpu4-intc 9>; + reg = <0xc000000 0x4000000>; + riscv,ndev = <10>; + }; |