1 files changed, 0 insertions, 132 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
deleted file mode 100644
index 816dac9c6f60..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ /dev/null
@@ -1,132 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-# Copyright (c) 2019 MediaTek Inc.
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Omnivision OV8856 CMOS Sensor
-
-maintainers:
-  - Sakari Ailus <sakari.ailus@linux.intel.com>
-
-description: |-
-  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
-  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
-  sub-sampled, and windowed 10-bit MIPI images in various formats via the
-  Serial Camera Control Bus (SCCB) interface. This chip is programmable
-  through I2C and two-wire SCCB. The sensor output is available via CSI-2
-  serial data output (up to 4-lane).
-
-properties:
-  compatible:
-    const: ovti,ov8856
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  clock-names:
-    description:
-      Input clock for the sensor.
-    items:
-      - const: xvclk
-
-  clock-frequency:
-    description:
-      Frequency of the xvclk clock in Hertz.
-
-  dovdd-supply:
-    description:
-      Definition of the regulator used as interface power supply.
-
-  avdd-supply:
-    description:
-      Definition of the regulator used as analog power supply.
-
-  dvdd-supply:
-    description:
-      Definition of the regulator used as digital power supply.
-
-  reset-gpios:
-    description:
-      The phandle and specifier for the GPIO that controls sensor reset.
-      This corresponds to the hardware pin XSHUTDOWN which is physically
-      active low.
-
-  port:
-    $ref: /schemas/graph.yaml#/$defs/port-base
-    additionalProperties: false
-
-    properties:
-      endpoint:
-        $ref: /schemas/media/video-interfaces.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          data-lanes:
-            oneOf:
-              - items:
-                  - const: 1
-              - items:
-                  - const: 1
-                  - const: 2
-              - items:
-                  - const: 1
-                  - const: 2
-                  - const: 3
-                  - const: 4
-
-        required:
-          - link-frequencies
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - clock-frequency
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
-  - reset-gpios
-  - port
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ov8856: camera@10 {
-            compatible = "ovti,ov8856";
-            reg = <0x10>;
-
-            reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
-            pinctrl-names = "default";
-            pinctrl-0 = <&clk_24m_cam>;
-
-            clocks = <&cam_osc>;
-            clock-names = "xvclk";
-            clock-frequency = <19200000>;
-
-            avdd-supply = <&mt6358_vcama2_reg>;
-            dvdd-supply = <&mt6358_vcamd_reg>;
-            dovdd-supply = <&mt6358_vcamio_reg>;
-
-            port {
-                wcam_out: endpoint {
-                    remote-endpoint = <&mipi_in_wcam>;
-                    data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <360000000>;
-                };
-            };
-        };
-    };
-...