summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/media/sun6i-csi.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/media/sun6i-csi.txt')
-rw-r--r--Documentation/devicetree/bindings/media/sun6i-csi.txt61
1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
deleted file mode 100644
index a2e3e56f0257..000000000000
--- a/Documentation/devicetree/bindings/media/sun6i-csi.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Allwinner V3s Camera Sensor Interface
--------------------------------------
-
-Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
-
-Required properties:
- - compatible: value must be one of:
- * "allwinner,sun6i-a31-csi"
- * "allwinner,sun8i-a83t-csi"
- * "allwinner,sun8i-h3-csi"
- * "allwinner,sun8i-v3s-csi"
- * "allwinner,sun50i-a64-csi"
- - reg: base address and size of the memory-mapped region.
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the CSI
- * bus: the CSI interface clock
- * mod: the CSI module clock
- * ram: the CSI DRAM clock
- - clock-names: the clock names mentioned above
- - resets: phandles to the reset line driving the CSI
-
-The CSI node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Endpoint node properties for CSI
----------------------------------
-See the video-interfaces.txt for a detailed description of these properties.
-- remote-endpoint : (required) a phandle to the bus receiver's endpoint
- node
-- bus-width: : (required) must be 8, 10, 12 or 16
-- pclk-sample : (optional) (default: sample on falling edge)
-- hsync-active : (required; parallel-only)
-- vsync-active : (required; parallel-only)
-
-Example:
-
-csi1: csi@1cb4000 {
- compatible = "allwinner,sun8i-v3s-csi";
- reg = <0x01cb4000 0x1000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_CSI>,
- <&ccu CLK_CSI1_SCLK>,
- <&ccu CLK_DRAM_CSI>;
- clock-names = "bus", "mod", "ram";
- resets = <&ccu RST_BUS_CSI>;
-
- port {
- /* Parallel bus endpoint */
- csi1_ep: endpoint {
- remote-endpoint = <&adv7611_ep>;
- bus-width = <16>;
-
- /* If hsync-active/vsync-active are missing,
- embedded BT.656 sync is used */
- hsync-active = <0>; /* Active low */
- vsync-active = <0>; /* Active low */
- pclk-sample = <1>; /* Rising */
- };
- };
-};