1 files changed, 0 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
deleted file mode 100644
index 07ad02075a93..000000000000
--- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Atmel High Speed MultiMedia Card Interface
-
-This controller on atmel products provides an interface for MMC, SD and SDIO
-types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the atmel-mci driver.
-
-1) MCI node
-
-Required properties:
-- compatible: should be "atmel,hsmci"
-- #address-cells: should be one. The cell is the slot id.
-- #size-cells: should be zero.
-- at least one slot node
-- clock-names: tuple listing input clock names.
-	Required elements: "mci_clk"
-- clocks: phandles to input clocks.
-
-The node contains child nodes for each slot that the platform uses
-
-Example MCI node:
-
-mmc0: mmc@f0008000 {
-	compatible = "atmel,hsmci";
-	reg = <0xf0008000 0x600>;
-	interrupts = <12 4>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clock-names = "mci_clk";
-	clocks = <&mci0_clk>;
-
-	[ child node definitions...]
-};
-
-2) slot nodes
-
-Required properties:
-- reg: should contain the slot id.
-- bus-width: number of data lines connected to the controller
-
-Optional properties:
-- cd-gpios: specify GPIOs for card detection
-- cd-inverted: invert the value of external card detect gpio line
-- wp-gpios: specify GPIOs for write protection
-
-Example slot node:
-
-slot@0 {
-	reg = <0>;
-	bus-width = <4>;
-	cd-gpios = <&pioD 15 0>
-	cd-inverted;
-};
-
-Example full MCI node:
-mmc0: mmc@f0008000 {
-	compatible = "atmel,hsmci";
-	reg = <0xf0008000 0x600>;
-	interrupts = <12 4>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		cd-gpios = <&pioD 15 0>
-		cd-inverted;
-	};
-	slot@1 {
-		reg = <1>;
-		bus-width = <4>;
-	};
-};